Hello
this small series introduces OF support for the ov5670 sensor and
adds support for regulators clocks and GPIOs.
Last year I dropped the ball as I didn't have access to HW anymore.
Luca (in cc) has reported he has a sensor and might give this new version
a spin, thanks!
Cheers
j
v4->v5:
- Enable clock in ov5670_runtime_resume() as suggested by Luca
- Add a patch to handle HBLANK, PIXEL_RATE and LINK_FREQ in .set_ctrl()
to fix a warning again reported by Luca
v3->v4:
- Rework power enablement in power up sequence to support !CONFIG_OF
- Minor changes as per Sakari's review
v2->v3:
- bindings:
- Drop assigned-clock properties from schema (moved to example)
- s/pwdn-gpios/powerdown-gpios/
- driver
- Use is_of_node() to decide how to parse clocks
- Fix:
drivers/media/i2c/ov5670.c:1787:18: error: initializer element is not a compile-time constant
.analog_crop = ov5670_analog_crop,
^~~~~~~~~~~~~~~~~~
reported by kernel test robot and Nathan Chancellor with
clang15 and gcc < 8
v1->v2:
- Address Krzysztof comments on bindings
- 2/8: new patch to use the common clock framework
- Address Lauren's comment on runtime_pm function names
- 7/8: new patch to implement init_cfg as suggested by Laurent
- Rework 8/8 which was incorrect as reported by Laurent
Thanks
j
Jacopo Mondi (8):
media: dt-bindings: Add OV5670
media: i2c: ov5670: Allow probing with OF
media: i2c: ov5670: Probe clocks with OF
media: i2c: ov5670: Probe regulators
media: i2c: ov5670: Probe GPIOs
media: i2c: ov5670: Add runtime_pm operations
media: i2c: ov5670: Implement init_cfg
media: i2c: ov5670: Handle RO controls in set_ctrl
Jean-Michel Hautbois (1):
media: i2c: ov5670: Add .get_selection() support
.../bindings/media/i2c/ovti,ov5670.yaml | 92 ++++++
MAINTAINERS | 1 +
drivers/media/i2c/ov5670.c | 300 +++++++++++++++---
3 files changed, 353 insertions(+), 40 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
--
2.39.0
