Hi Stefan,
Thank for the testing.
On 1/23/23 5:04 AM, Stefan Wahren wrote:
Hi Umang,
Am 20.01.23 um 21:10 schrieb Umang Jain:
This series just introduces five extra patches for dropping include
directives from Makefiles (suggested by Greg KH) and rebased.
The main patch (6/6) removes platform device/driver abuse and moves
things to standard device/driver model using a custom_bus. Specific
details are elaborated in the commit message.
The patch series is based on top of d514392f17fd (tag: next-20230120)
of linux-next.
applied this series on top of linux-next and build it with
arm/multi_v7_defconfig plus the following:
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=m
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
CONFIG_BCM2835_VCHIQ_MMAL=m
and the devices doesn't register on Raspberry Pi 3 B Plus:
[ 25.523337] vchiq: module is from the staging directory, the
quality is unknown, you have been warned.
[ 25.541647] bcm2835_vchiq 3f00b840.mailbox: Failed to register
bcm2835_audio vchiq device
[ 25.553692] bcm2835_vchiq 3f00b840.mailbox: Failed to register
bcm2835-camera vchiq device
I was able to reproduce and it seems the issue here is the change
mentioned in the cover
- drop dma_set_mask_and_coherent
in V6.
(I usually test patches on RPi 4B with vcsm-cma and bcm2835-isp applied
so my branch has the DMA hunk included while I was testing V6)
Below is the hunk which should resolve the issue.
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
@@ -6,6 +6,7 @@
*/
#include <linux/device/bus.h>
+#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -72,6 +73,12 @@ int vchiq_device_register(struct device *parent,
const char *name)
device->dev.type = &vchiq_device_type;
device->dev.release = vchiq_device_release;
+ ret = dma_set_mask_and_coherent(&device->dev, DMA_BIT_MASK(32));
+ if (ret < 0) {
+ vchiq_device_release(&device->dev);
+ return ret;
+ }
+
ret = device_register(&device->dev);
if (ret) {
put_device(&device->dev);
It seems we need to include the dma_set_mask_and_coherent() even if
bcm2835-audio, bcm2835-camera device doesn't do DMA? I need to look into
why is that/
Laurent, any thoughts on this please?
