Re: [PATCH 1/2] dt-bindings: media: i2c: add imx415 cmos image sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 1/18/23 16:48, Rob Herring wrote:
> On Wed, Jan 18, 2023 at 11:32:38AM +0100, Michael Riesch wrote:
>> Add devicetree binding for the Sony IMX415 CMOS image sensor.
>>
>> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
>> ---
>>  .../bindings/media/i2c/sony,imx415.yaml       | 120 ++++++++++++++++++
>>  MAINTAINERS                                   |   7 +
>>  2 files changed, 127 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>> new file mode 100644
>> index 000000000000..ae54834a2341
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>> @@ -0,0 +1,120 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Sony IMX415 CMOS Image Sensor
>> +
>> +maintainers:
>> +  - Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
>> +
>> +description: |-
>> +  The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
>> +  solid-state image sensor with a square pixel array and 8.46 M effective
>> +  pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
>> +  1.8 V triple power supply, and has low power consumption.
>> +  The IMX415 is programmable through I2C interface. The sensor output is
>> +  available via CSI-2 serial data output (two or four lanes).
>> +
>> +allOf:
>> +  - $ref: ../video-interface-devices.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: sony,imx415
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
>> +    items:
>> +      - const: inck
>> +
>> +  avdd-supply:
>> +    description: Analog power supply (2.9 V)
>> +
>> +  dvdd-supply:
>> +    description: Digital power supply (1.1 V)
>> +
>> +  ovdd-supply:
>> +    description: Interface power supply (1.8 V)
>> +
>> +  reset-gpios:
>> +    description: Sensor reset (XCLR) GPIO
>> +    maxItems: 1
>> +
>> +  flash-leds: true
>> +
>> +  lens-focus: true
>> +
>> +  orientation: true
>> +
>> +  rotation: true
>> +
>> +  port:
>> +    $ref: /schemas/graph.yaml#/properties/port
> 
> /properties/port is for when there are no extra properties. You need 
> /$defs/port-base here since there are extra properties in the endpoint 
> node.

Aaahhh, thanks for the pointer! I was really out of ideas what causes
this error. dt_binding_check now completes successfully.

I'll fix it in v2.

Best regards,
Michael

> 
>> +
>> +    properties:
>> +      endpoint:
>> +        $ref: /schemas/media/video-interfaces.yaml#
>> +        unevaluatedProperties: false
>> +
>> +        properties:
>> +          data-lanes: true
>> +          link-frequencies: true
>> +
>> +        required:
>> +          - data-lanes
>> +          - link-frequencies
>> +
>> +    required:
>> +      - endpoint
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - avdd-supply
>> +  - dvdd-supply
>> +  - ovdd-supply
>> +  - port
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    i2c {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        imx415: camera-sensor@1a {
>> +            compatible = "sony,imx415";
>> +            reg = <0x1a>;
>> +            avdd-supply = <&vcc2v9_cam>;
>> +            clocks = <&clock_cam>;
>> +            clock-names = "inck";
>> +            dvdd-supply = <&vcc1v1_cam>;
>> +            ovdd-supply = <&vcc1v8_cam>;
>> +            lens-focus = <&vcm>;
>> +            rotation = <180>;
>> +            orientation = <2>;
>> +            reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
>> +
>> +            port {
>> +                imx415_ep: endpoint {
>> +                    remote-endpoint = <&mipi_in>;
>> +                    clock-lanes = <0>;
>> +                    data-lanes = <1 2>;
>> +                };
>> +            };
>> +        };
>> +    };
>> +...
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index f61eb221415b..c9fa893bf649 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19493,6 +19493,13 @@ T:	git git://linuxtv.org/media_tree.git
>>  F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
>>  F:	drivers/media/i2c/imx412.c
>>  
>> +SONY IMX415 SENSOR DRIVER
>> +M:	Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
>> +L:	linux-media@xxxxxxxxxxxxxxx
>> +S:	Maintained
>> +T:	git git://linuxtv.org/media_tree.git
>> +F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>> +
>>  SONY MEMORYSTICK SUBSYSTEM
>>  M:	Maxim Levitsky <maximlevitsky@xxxxxxxxx>
>>  M:	Alex Dubov <oakad@xxxxxxxxx>
>> -- 
>> 2.30.2
>>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux