[PATCH v3 09/17] media: i2c: imx290: Use dev_err_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Improve error handling in the probe() function with dev_err_probe().

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
 drivers/media/i2c/imx290.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 530da5b03e61..51f430ca3652 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -1224,10 +1224,9 @@ static int imx290_probe(struct i2c_client *client)
 
 	/* get system clock (xclk) */
 	imx290->xclk = devm_clk_get(dev, "xclk");
-	if (IS_ERR(imx290->xclk)) {
-		dev_err(dev, "Could not get xclk");
-		return PTR_ERR(imx290->xclk);
-	}
+	if (IS_ERR(imx290->xclk))
+		return dev_err_probe(dev, PTR_ERR(imx290->xclk),
+				     "Could not get xclk");
 
 	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
 				       &xclk_freq);
@@ -1250,17 +1249,14 @@ static int imx290_probe(struct i2c_client *client)
 	}
 
 	ret = imx290_get_regulators(dev, imx290);
-	if (ret < 0) {
-		dev_err(dev, "Cannot get regulators\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot get regulators\n");
 
 	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset",
 						   GPIOD_OUT_HIGH);
-	if (IS_ERR(imx290->rst_gpio)) {
-		dev_err(dev, "Cannot get reset gpio\n");
-		return PTR_ERR(imx290->rst_gpio);
-	}
+	if (IS_ERR(imx290->rst_gpio))
+		return dev_err_probe(dev, PTR_ERR(imx290->rst_gpio),
+				     "Cannot get reset gpio\n");
 
 	mutex_init(&imx290->lock);
 
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux