Hi Alexander,
On Mon, Jan 16, 2023 at 12:04:34PM +0100, Alexander Stein wrote:
> Am Samstag, 14. Januar 2023, 18:17:56 CET schrieb Laurent Pinchart:
> > Use the V4L2 subdev active state API to store the active format. This
> > simplifies the driver not only by dropping the imx290 current_format
> > field, but it also allows dropping the imx290 lock, replaced with the
> > state lock.
> >
> > The lock check in imx290_ctrl_update() can be dropped as
> > imx290_set_fmt() can't be called anywmore with which set to ACTIVE
> > before controls are initialized.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > Changes since v1:
> >
> > - Remove lock check from imx290_ctrl_update()
> > - Drop unrelated change
> > - Fix error handling in imx290_subdev_init()
> > - Handle errors from v4l2_subdev_init_finalize()
> > - Return immediately from imx290_set_ctrl() for read-only controls
> > - Call v4l2_subdev_cleanup()
> > ---
> > drivers/media/i2c/imx290.c | 170 +++++++++++++++++--------------------
> > 1 file changed, 80 insertions(+), 90 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index b01a627c8c03..94d23eea36be 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -177,12 +177,12 @@ struct imx290 {
> > struct clk *xclk;
> > struct regmap *regmap;
> > u8 nlanes;
> > - u8 bpp;
> >
> > struct v4l2_subdev sd;
> > struct media_pad pad;
> > - struct v4l2_mbus_framefmt current_format;
> > +
> > const struct imx290_mode *current_mode;
> > + u8 bpp;
> >
> > struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
> > struct gpio_desc *rst_gpio;
> > @@ -192,8 +192,6 @@ struct imx290 {
> > struct v4l2_ctrl *pixel_rate;
> > struct v4l2_ctrl *hblank;
> > struct v4l2_ctrl *vblank;
> > -
> > - struct mutex lock;
> > };
> >
> > static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
> > @@ -524,13 +522,14 @@ static int imx290_set_black_level(struct imx290
> > *imx290, black_level >> (16 - imx290->bpp), err);
> > }
> >
> > -static int imx290_write_current_format(struct imx290 *imx290)
> > +static int imx290_setup_format(struct imx290 *imx290,
> > + const struct v4l2_mbus_framefmt *format)
> > {
> > const struct imx290_regval *regs;
> > unsigned int num_regs;
> > int ret;
> >
> > - switch (imx290->current_format.code) {
> > + switch (format->code) {
> > case MEDIA_BUS_FMT_SRGGB10_1X10:
> > regs = imx290_10bit_settings;
> > num_regs = ARRAY_SIZE(imx290_10bit_settings);
> > @@ -561,12 +560,31 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> > {
> > struct imx290 *imx290 = container_of(ctrl->handler,
> > struct imx290, ctrls);
> > + const struct v4l2_mbus_framefmt *format;
> > + struct v4l2_subdev_state *state;
> > int ret = 0;
> >
> > + /*
> > + * Return immediately for controls that don't need to be applied to the
> > + * device. This includes all controls modified in imx290_ctrl_update(),
> > + * which is called at probe time before runtime PM is initialized, so
> > + * we can't proceed to the pm_runtime_get_if_in_use() call below.
> > + */
> > + switch (ctrl->id) {
> > + case V4L2_CID_LINK_FREQ:
> > + case V4L2_CID_PIXEL_RATE:
> > + case V4L2_CID_VBLANK:
> > + case V4L2_CID_HBLANK:
> > + return 0;
> > + }
>
> I don't like keeping the IDs synchronized in two functions. Isn't checking for
> 'ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY' enough?
It should be. I'll do so.
> On that side V4L2_CID_PIXEL_RATE is missing the read-only flag, no?
That's right. I'll add a patch in v3 to make it read-only.
> > /* V4L2 controls values will be applied only when power is already up */
> > if (!pm_runtime_get_if_in_use(imx290->dev))
> > return 0;
> >
> > + state = v4l2_subdev_get_locked_active_state(&imx290->sd);
> > + format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
> > +
> > switch (ctrl->id) {
> > case V4L2_CID_ANALOGUE_GAIN:
> > ret = imx290_write(imx290, IMX290_GAIN, ctrl->val, NULL);
> > @@ -592,6 +610,7 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> > &ret);
> > }
> > break;
> > +
> > default:
> > ret = -EINVAL;
> > break;
> > @@ -626,13 +645,6 @@ static void imx290_ctrl_update(struct imx290 *imx290,
> > s64 link_freq = imx290_link_freqs_ptr(imx290)[mode->link_freq_index];
> > u64 pixel_rate;
> >
> > - /*
> > - * This function may be called from imx290_set_fmt() before controls
> > - * get created by imx290_ctrl_init(). Return immediately in that case.
> > - */
> > - if (!imx290->ctrls.lock)
> > - return;
> > -
> > /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
> > pixel_rate = link_freq * 2 * imx290->nlanes;
> > do_div(pixel_rate, imx290->bpp);
> > @@ -654,7 +666,6 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> > return ret;
> >
> > v4l2_ctrl_handler_init(&imx290->ctrls, 9);
> > - imx290->ctrls.lock = &imx290->lock;
> >
> > /*
> > * The sensor has an analog gain and a digital gain, both controlled
> > @@ -719,11 +730,6 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> > return ret;
> > }
> >
> > - mutex_lock(imx290->ctrls.lock);
> > - imx290_ctrl_update(imx290, &imx290->current_format,
> > - imx290->current_mode);
> > - mutex_unlock(imx290->ctrls.lock);
> > -
> > return 0;
> > }
> >
> > @@ -732,8 +738,10 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> > */
> >
> > /* Start streaming */
> > -static int imx290_start_streaming(struct imx290 *imx290)
> > +static int imx290_start_streaming(struct imx290 *imx290,
> > + struct v4l2_subdev_state *state)
> > {
> > + const struct v4l2_mbus_framefmt *format;
> > int ret;
> >
> > /* Set init register settings */
> > @@ -746,7 +754,8 @@ static int imx290_start_streaming(struct imx290 *imx290)
> > }
> >
> > /* Apply the register values related to current frame format */
> > - ret = imx290_write_current_format(imx290);
> > + format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
> > + ret = imx290_setup_format(imx290, format);
> > if (ret < 0) {
> > dev_err(imx290->dev, "Could not set frame format\n");
> > return ret;
> > @@ -766,7 +775,7 @@ static int imx290_start_streaming(struct imx290 *imx290)
> > return ret;
> >
> > /* Apply customized values from user */
> > - ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> > + ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> > if (ret) {
> > dev_err(imx290->dev, "Could not sync v4l2 controls\n");
> > return ret;
> > @@ -795,39 +804,32 @@ static int imx290_stop_streaming(struct imx290 *imx290)
> > static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
> > {
> > struct imx290 *imx290 = to_imx290(sd);
> > + struct v4l2_subdev_state *state;
> > int ret = 0;
> >
> > + state = v4l2_subdev_lock_and_get_active_state(sd);
>
> Is there ever the case that state==NULL? If so you will deference a NULL
> pointer in v4l2_subdev_unlock_state() later on.
No, that can't happen, the driver calls v4l2_subdev_init_finalize() at
probe time, so sd->active_state can't be NULL.
> > if (enable) {
> > ret = pm_runtime_resume_and_get(imx290->dev);
> > if (ret < 0)
> > - goto unlock_and_return;
> > + goto unlock;
> >
> > - ret = imx290_start_streaming(imx290);
> > + ret = imx290_start_streaming(imx290, state);
> > if (ret) {
> > dev_err(imx290->dev, "Start stream failed\n");
> > pm_runtime_put(imx290->dev);
> > - goto unlock_and_return;
> > + goto unlock;
> > }
> > } else {
> > imx290_stop_streaming(imx290);
> > pm_runtime_put(imx290->dev);
> > }
> >
> > -unlock_and_return:
> > -
> > +unlock:
> > + v4l2_subdev_unlock_state(state);
> > return ret;
> > }
> >
> > -static struct v4l2_mbus_framefmt *
> > -imx290_get_pad_format(struct imx290 *imx290, struct v4l2_subdev_state *state,
> > - u32 which)
> > -{
> > - if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > - return &imx290->current_format;
> > - else
> > - return v4l2_subdev_get_try_format(&imx290->sd, state, 0);
> > -}
> > -
> > static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_mbus_code_enum *code)
> > @@ -862,23 +864,6 @@ static int imx290_enum_frame_size(struct v4l2_subdev *sd
> > return 0;
> > }
> >
> > -static int imx290_get_fmt(struct v4l2_subdev *sd,
> > - struct v4l2_subdev_state *sd_state,
> > - struct v4l2_subdev_format *fmt)
> > -{
> > - struct imx290 *imx290 = to_imx290(sd);
> > - struct v4l2_mbus_framefmt *framefmt;
> > -
> > - mutex_lock(&imx290->lock);
> > -
> > - framefmt = imx290_get_pad_format(imx290, sd_state, fmt->which);
> > - fmt->format = *framefmt;
> > -
> > - mutex_unlock(&imx290->lock);
> > -
> > - return 0;
> > -}
> > -
> > static int imx290_set_fmt(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_format *fmt)
> > @@ -888,8 +873,6 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
> > struct v4l2_mbus_framefmt *format;
> > unsigned int i;
> >
> > - mutex_lock(&imx290->lock);
> > -
> > mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290),
> > imx290_modes_num(imx290), width, height,
> > fmt->format.width, fmt->format.height);
> > @@ -907,7 +890,7 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
> > fmt->format.code = imx290_formats[i].code;
> > fmt->format.field = V4L2_FIELD_NONE;
> >
> > - format = imx290_get_pad_format(imx290, sd_state, fmt->which);
> > + format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> >
> > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > imx290->current_mode = mode;
> > @@ -918,8 +901,6 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
> >
> > *format = fmt->format;
> >
> > - mutex_unlock(&imx290->lock);
> > -
> > return 0;
> > }
> >
> > @@ -927,14 +908,11 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_selection *sel)
> > {
> > - struct imx290 *imx290 = to_imx290(sd);
> > struct v4l2_mbus_framefmt *format;
> >
> > switch (sel->target) {
> > case V4L2_SEL_TGT_CROP: {
> > - format = imx290_get_pad_format(imx290, sd_state, sel->which);
> > -
> > - mutex_lock(&imx290->lock);
> > + format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> >
> > sel->r.top = IMX920_PIXEL_ARRAY_MARGIN_TOP
> > + (IMX290_PIXEL_ARRAY_RECORDING_HEIGHT - format->height) / 2;
> > @@ -943,7 +921,6 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
> > sel->r.width = format->width;
> > sel->r.height = format->height;
> >
> > - mutex_unlock(&imx290->lock);
> > return 0;
> > }
> >
> > @@ -972,11 +949,13 @@ static int imx290_get_selection(struct v4l2_subdev *sd
> > static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
> > struct v4l2_subdev_state *sd_state)
> > {
> > - struct v4l2_subdev_format fmt = { 0 };
> > -
> > - fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> > - fmt.format.width = 1920;
> > - fmt.format.height = 1080;
> > + struct v4l2_subdev_format fmt = {
> > + .which = V4L2_SUBDEV_FORMAT_TRY,
> > + .format = {
> > + .width = 1920,
> > + .height = 1080,
> > + },
> > + };
> >
> > imx290_set_fmt(subdev, sd_state, &fmt);
> >
> > @@ -991,7 +970,7 @@ static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
> > .init_cfg = imx290_entity_init_cfg,
> > .enum_mbus_code = imx290_enum_mbus_code,
> > .enum_frame_size = imx290_enum_frame_size,
> > - .get_fmt = imx290_get_fmt,
> > + .get_fmt = v4l2_subdev_get_fmt,
> > .set_fmt = imx290_set_fmt,
> > .get_selection = imx290_get_selection,
> > };
> > @@ -1008,20 +987,12 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
> > static int imx290_subdev_init(struct imx290 *imx290)
> > {
> > struct i2c_client *client = to_i2c_client(imx290->dev);
> > + const struct v4l2_mbus_framefmt *format;
> > + struct v4l2_subdev_state *state;
> > int ret;
> >
> > - /*
> > - * Initialize the frame format. In particular, imx290->current_mode
> > - * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call
> > - * below relies on these fields.
> > - */
> > - imx290_entity_init_cfg(&imx290->sd, NULL);
> > -
> > - ret = imx290_ctrl_init(imx290);
> > - if (ret < 0) {
> > - dev_err(imx290->dev, "Control initialization error %d\n", ret);
> > - return ret;
> > - }
> > + imx290->current_mode = &imx290_modes_ptr(imx290)[0];
> > + imx290->bpp = imx290_formats[0].bpp;
> >
> > v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> > imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > @@ -1033,15 +1004,40 @@ static int imx290_subdev_init(struct imx290 *imx290)
> > ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> > if (ret < 0) {
> > dev_err(imx290->dev, "Could not register media entity\n");
> > - v4l2_ctrl_handler_free(&imx290->ctrls);
> > return ret;
> > }
> >
> > + ret = imx290_ctrl_init(imx290);
> > + if (ret < 0) {
> > + dev_err(imx290->dev, "Control initialization error %d\n", ret);
> > + goto err_media;
> > + }
> > +
> > + imx290->sd.state_lock = imx290->ctrls.lock;
> > +
> > + ret = v4l2_subdev_init_finalize(&imx290->sd);
> > + if (ret < 0) {
> > + dev_err(imx290->dev, "subdev initialization error %d\n", ret);
> > + goto err_ctrls;
> > + }
> > +
> > + state = v4l2_subdev_lock_and_get_active_state(&imx290->sd);
> > + format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
> > + imx290_ctrl_update(imx290, format, imx290->current_mode);
> > + v4l2_subdev_unlock_state(state);
> > +
> > return 0;
> > +
> > +err_ctrls:
> > + v4l2_ctrl_handler_free(&imx290->ctrls);
> > +err_media:
> > + media_entity_cleanup(&imx290->sd.entity);
> > + return ret;
> > }
> >
> > static void imx290_subdev_cleanup(struct imx290 *imx290)
> > {
> > + v4l2_subdev_cleanup(&imx290->sd);
> > media_entity_cleanup(&imx290->sd.entity);
> > v4l2_ctrl_handler_free(&imx290->ctrls);
> > }
> > @@ -1272,12 +1268,10 @@ static int imx290_probe(struct i2c_client *client)
> > if (ret)
> > return ret;
> >
> > - mutex_init(&imx290->lock);
> > -
> > /* Initialize and register subdev. */
> > ret = imx290_subdev_init(imx290);
> > if (ret)
> > - goto err_mutex;
> > + return ret;
> >
> > ret = v4l2_async_register_subdev(&imx290->sd);
> > if (ret < 0) {
> > @@ -1300,8 +1294,6 @@ static int imx290_probe(struct i2c_client *client)
> >
> > err_subdev:
> > imx290_subdev_cleanup(imx290);
> > -err_mutex:
> > - mutex_destroy(&imx290->lock);
> >
> > return ret;
> > }
> > @@ -1314,8 +1306,6 @@ static void imx290_remove(struct i2c_client *client)
> > v4l2_async_unregister_subdev(sd);
> > imx290_subdev_cleanup(imx290);
> >
> > - mutex_destroy(&imx290->lock);
> > -
> > pm_runtime_disable(imx290->dev);
> > if (!pm_runtime_status_suspended(imx290->dev))
> > imx290_power_off(imx290->dev);
--
Regards,
Laurent Pinchart
