Re: [PATCH v3 2/2] media: i2c: Add driver for OmniVision OV8858

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent

On Tue, Jan 10, 2023 at 03:02:02PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Mon, Jan 09, 2023 at 01:01:29PM +0100, Jacopo Mondi wrote:
> > From: Nicholas Roth <nicholas@xxxxxxxxxxxxx>
> >
> > Add a driver for OmniVision OV8858 image sensor.
> >
> > The driver currently supports operations with 2 and 4 data lanes, in
> > full resolution and half-binned resolution modes.
> >
> > The driver has been upported from the PinephonePro BSP available at
> > https://gitlab.com/pine64-org/linux.git
> > at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
> > name").
> >
> > Signed-off-by: Nicholas Roth <nicholas@xxxxxxxxxxxxx>
> > Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > ---
> >  MAINTAINERS                |    9 +
> >  drivers/media/i2c/Kconfig  |   13 +
> >  drivers/media/i2c/Makefile |    1 +
> >  drivers/media/i2c/ov8858.c | 1993 ++++++++++++++++++++++++++++++++++++
> >  4 files changed, 2016 insertions(+)
> >  create mode 100644 drivers/media/i2c/ov8858.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index f61eb221415b..fafb0a01be93 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -15524,6 +15524,15 @@ T:	git git://linuxtv.org/media_tree.git
> >  F:	Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> >  F:	drivers/media/i2c/ov8856.c
> >
> > +OMNIVISION OV8858 SENSOR DRIVER
> > +M:	Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > +M:	Nicholas Roth <nicholas@xxxxxxxxxxxxx>
> > +L:	linux-media@xxxxxxxxxxxxxxx
> > +S:	Maintained
> > +T:	git git://linuxtv.org/media_tree.git
> > +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
> > +F:	drivers/media/i2c/ov8858.c
> > +
> >  OMNIVISION OV9282 SENSOR DRIVER
> >  M:	Paul J. Murphy <paul.j.murphy@xxxxxxxxx>
> >  M:	Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 833241897d63..12ba8542778f 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -645,6 +645,19 @@ config VIDEO_OV8856
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called ov8856.
> >
> > +config VIDEO_OV8858
> > +	tristate "OmniVision OV8858 sensor support"
> > +	depends on I2C && PM && VIDEO_DEV
> > +	select MEDIA_CONTROLLER
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	select V4L2_FWNODE
> > +	help
> > +	  This is a Video4Linux2 sensor driver for OmniVision
> > +	  OV8858 camera sensor.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called ov8858.
> > +
> >  config VIDEO_OV8865
> >  	tristate "OmniVision OV8865 sensor support"
> >  	depends on I2C && PM && VIDEO_DEV
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index 4d6c052bb5a7..b611a8277d57 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -96,6 +96,7 @@ obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
> >  obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
> >  obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
> >  obj-$(CONFIG_VIDEO_OV8856) += ov8856.o
> > +obj-$(CONFIG_VIDEO_OV8858) += ov8858.o
> >  obj-$(CONFIG_VIDEO_OV8865) += ov8865.o
> >  obj-$(CONFIG_VIDEO_OV9282) += ov9282.o
> >  obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
> > diff --git a/drivers/media/i2c/ov8858.c b/drivers/media/i2c/ov8858.c
> > new file mode 100644
> > index 000000000000..4c50cdd55e16
> > --- /dev/null
> > +++ b/drivers/media/i2c/ov8858.c
> > @@ -0,0 +1,1993 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2023 Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > + * Copyright (C) 2022 Nicholas Roth <nicholas@xxxxxxxxxxxxx>
> > + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-common.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mediabus.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#define OV8858_LINK_FREQ		360000000U
> > +#define OV8858_XVCLK_FREQ		24000000
> > +
> > +#define OV8858_REG_SIZE_SHIFT		16
> > +#define OV8858_REG_ADDR_MASK		0xffff
> > +#define OV8858_REG_8BIT(n)		((1U << OV8858_REG_SIZE_SHIFT) | (n))
> > +#define OV8858_REG_16BIT(n)		((2U << OV8858_REG_SIZE_SHIFT) | (n))
> > +#define OV8858_REG_24BIT(n)		((3U << OV8858_REG_SIZE_SHIFT) | (n))
> > +
> > +#define OV8858_REG_SC_CTRL0100		OV8858_REG_8BIT(0x0100)
> > +#define OV8858_MODE_SW_STANDBY		0x0
> > +#define OV8858_MODE_STREAMING		0x1
> > +
> > +#define OV8858_REG_CHIP_ID		OV8858_REG_24BIT(0x300a)
> > +#define OV8858_CHIP_ID			0x008858
> > +
> > +#define OV8858_REG_SUB_ID		OV8858_REG_8BIT(0x302a)
> > +#define OV8858_R1A			0xb0
> > +#define OV8858_R2A			0xb2
> > +
> > +#define OV8858_REG_LONG_EXPO		OV8858_REG_24BIT(0x3500)
> > +#define OV8858_EXPOSURE_MIN		4
> > +#define OV8858_EXPOSURE_STEP		1
> > +#define OV8858_EXPOSURE_MARGIN		4
> > +
> > +#define OV8858_REG_LONG_GAIN		OV8858_REG_16BIT(0x3508)
> > +#define OV8858_LONG_GAIN_MIN		0x0
> > +#define OV8858_LONG_GAIN_MAX		0x7ff
> > +#define OV8858_LONG_GAIN_STEP		1
> > +#define OV8858_LONG_GAIN_DEFAULT	0x80
> > +
> > +#define OV8858_REG_LONG_DIGIGAIN	OV8858_REG_16BIT(0x350a)
> > +#define OV8858_LONG_DIGIGAIN_H_MASK	0x3fc0
> > +#define OV8858_LONG_DIGIGAIN_L_MASK	0x3f
> > +#define OV8858_LONG_DIGIGAIN_H_SHIFT	2
> > +#define OV8858_LONG_DIGIGAIN_MIN	0x0
> > +#define OV8858_LONG_DIGIGAIN_MAX	0x3fff
> > +#define OV8858_LONG_DIGIGAIN_STEP	1
> > +#define OV8858_LONG_DIGIGAIN_DEFAULT	0x200
> > +
> > +#define OV8858_REG_VTS			OV8858_REG_16BIT(0x380e)
> > +#define OV8858_VTS_MAX			0x7fff
> > +
> > +#define OV8858_REG_TEST_PATTERN		OV8858_REG_8BIT(0x5e00)
> > +#define OV8858_TEST_PATTERN_ENABLE	0x80
> > +#define OV8858_TEST_PATTERN_DISABLE	0x0
> > +
> > +#define REG_NULL			0xffff
> > +
> > +static const char * const ov8858_supply_names[] = {
> > +	"avdd",		/* Analog power */
> > +	"dovdd",	/* Digital I/O power */
> > +	"dvdd",		/* Digital core power */
> > +};
> > +
> > +#define OV8858_NUM_SUPPLIES ARRAY_SIZE(ov8858_supply_names)
> > +
> > +struct regval {
> > +	u16 addr;
> > +	u8 val;
> > +};
> > +
> > +struct regval_modes {
> > +	const struct regval *mode_2lanes;
> > +	const struct regval *mode_4lanes;
> > +};
> > +
> > +struct ov8858_mode {
> > +	u32 width;
> > +	u32 height;
> > +	u32 hts_def;
> > +	u32 vts_def;
> > +	u32 exp_def;
> > +	const struct regval_modes reg_modes;
> > +};
> > +
> > +struct ov8858 {
> > +	struct i2c_client	*client;
> > +	struct clk		*xvclk;
> > +	struct gpio_desc	*reset_gpio;
> > +	struct gpio_desc	*pwdn_gpio;
> > +	struct regulator_bulk_data supplies[OV8858_NUM_SUPPLIES];
> > +
> > +	struct v4l2_subdev	subdev;
> > +	struct media_pad	pad;
> > +
> > +	struct v4l2_ctrl_handler ctrl_handler;
> > +	struct v4l2_ctrl	*exposure;
> > +	struct v4l2_ctrl	*hblank;
> > +	struct v4l2_ctrl	*vblank;
> > +
> > +	const struct regval	*global_regs;
> > +
> > +	unsigned int		num_lanes;
> > +	unsigned int		pixel_rate;
> > +};
> > +
> > +static inline struct ov8858 *sd_to_ov8858(struct v4l2_subdev *sd)
> > +{
> > +	return container_of(sd, struct ov8858, subdev);
> > +}
> > +
> > +static const struct regval ov8858_global_regs_r1a[] = {
> > +	{0x0100, 0x00},
> > +	{0x0100, 0x00},
> > +	{0x0100, 0x00},
> > +	{0x0100, 0x00},
> > +	{0x0302, 0x1e},
> > +	{0x0303, 0x00},
> > +	{0x0304, 0x03},
> > +	{0x030e, 0x00},
> > +	{0x030f, 0x09},
> > +	{0x0312, 0x01},
> > +	{0x031e, 0x0c},
> > +	{0x3600, 0x00},
> > +	{0x3601, 0x00},
> > +	{0x3602, 0x00},
> > +	{0x3603, 0x00},
> > +	{0x3604, 0x22},
> > +	{0x3605, 0x30},
> > +	{0x3606, 0x00},
> > +	{0x3607, 0x20},
> > +	{0x3608, 0x11},
> > +	{0x3609, 0x28},
> > +	{0x360a, 0x00},
> > +	{0x360b, 0x06},
> > +	{0x360c, 0xdc},
> > +	{0x360d, 0x40},
> > +	{0x360e, 0x0c},
> > +	{0x360f, 0x20},
> > +	{0x3610, 0x07},
> > +	{0x3611, 0x20},
> > +	{0x3612, 0x88},
> > +	{0x3613, 0x80},
> > +	{0x3614, 0x58},
> > +	{0x3615, 0x00},
> > +	{0x3616, 0x4a},
> > +	{0x3617, 0xb0},
> > +	{0x3618, 0x56},
> > +	{0x3619, 0x70},
> > +	{0x361a, 0x99},
> > +	{0x361b, 0x00},
> > +	{0x361c, 0x07},
> > +	{0x361d, 0x00},
> > +	{0x361e, 0x00},
> > +	{0x361f, 0x00},
> > +	{0x3638, 0xff},
> > +	{0x3633, 0x0c},
> > +	{0x3634, 0x0c},
> > +	{0x3635, 0x0c},
> > +	{0x3636, 0x0c},
> > +	{0x3645, 0x13},
> > +	{0x3646, 0x83},
> > +	{0x364a, 0x07},
> > +	{0x3015, 0x01},
> > +	{0x3018, 0x32},
> > +	{0x3020, 0x93},
> > +	{0x3022, 0x01},
> > +	{0x3031, 0x0a},
> > +	{0x3034, 0x00},
> > +	{0x3106, 0x01},
> > +	{0x3305, 0xf1},
> > +	{0x3308, 0x00},
> > +	{0x3309, 0x28},
> > +	{0x330a, 0x00},
> > +	{0x330b, 0x20},
> > +	{0x330c, 0x00},
> > +	{0x330d, 0x00},
> > +	{0x330e, 0x00},
> > +	{0x330f, 0x40},
> > +	{0x3307, 0x04},
> > +	{0x3500, 0x00},
> > +	{0x3501, 0x4d},
> > +	{0x3502, 0x40},
> > +	{0x3503, 0x00},
> > +	{0x3505, 0x80},
> > +	{0x3508, 0x04},
> > +	{0x3509, 0x00},
> > +	{0x350c, 0x00},
> > +	{0x350d, 0x80},
> > +	{0x3510, 0x00},
> > +	{0x3511, 0x02},
> > +	{0x3512, 0x00},
> > +	{0x3700, 0x18},
> > +	{0x3701, 0x0c},
> > +	{0x3702, 0x28},
> > +	{0x3703, 0x19},
> > +	{0x3704, 0x14},
> > +	{0x3705, 0x00},
> > +	{0x3706, 0x35},
> > +	{0x3707, 0x04},
> > +	{0x3708, 0x24},
> > +	{0x3709, 0x33},
> > +	{0x370a, 0x00},
> > +	{0x370b, 0xb5},
> > +	{0x370c, 0x04},
> > +	{0x3718, 0x12},
> > +	{0x3719, 0x31},
> > +	{0x3712, 0x42},
> > +	{0x3714, 0x24},
> > +	{0x371e, 0x19},
> > +	{0x371f, 0x40},
> > +	{0x3720, 0x05},
> > +	{0x3721, 0x05},
> > +	{0x3724, 0x06},
> > +	{0x3725, 0x01},
> > +	{0x3726, 0x06},
> > +	{0x3728, 0x05},
> > +	{0x3729, 0x02},
> > +	{0x372a, 0x03},
> > +	{0x372b, 0x53},
> > +	{0x372c, 0xa3},
> > +	{0x372d, 0x53},
> > +	{0x372e, 0x06},
> > +	{0x372f, 0x10},
> > +	{0x3730, 0x01},
> > +	{0x3731, 0x06},
> > +	{0x3732, 0x14},
> > +	{0x3733, 0x10},
> > +	{0x3734, 0x40},
> > +	{0x3736, 0x20},
> > +	{0x373a, 0x05},
> > +	{0x373b, 0x06},
> > +	{0x373c, 0x0a},
> > +	{0x373e, 0x03},
> > +	{0x3755, 0x10},
> > +	{0x3758, 0x00},
> > +	{0x3759, 0x4c},
> > +	{0x375a, 0x06},
> > +	{0x375b, 0x13},
> > +	{0x375c, 0x20},
> > +	{0x375d, 0x02},
> > +	{0x375e, 0x00},
> > +	{0x375f, 0x14},
> > +	{0x3768, 0x22},
> > +	{0x3769, 0x44},
> > +	{0x376a, 0x44},
> > +	{0x3761, 0x00},
> > +	{0x3762, 0x00},
> > +	{0x3763, 0x00},
> > +	{0x3766, 0xff},
> > +	{0x376b, 0x00},
> > +	{0x3772, 0x23},
> > +	{0x3773, 0x02},
> > +	{0x3774, 0x16},
> > +	{0x3775, 0x12},
> > +	{0x3776, 0x04},
> > +	{0x3777, 0x00},
> > +	{0x3778, 0x1b},
> > +	{0x37a0, 0x44},
> > +	{0x37a1, 0x3d},
> > +	{0x37a2, 0x3d},
> > +	{0x37a3, 0x00},
> > +	{0x37a4, 0x00},
> > +	{0x37a5, 0x00},
> > +	{0x37a6, 0x00},
> > +	{0x37a7, 0x44},
> > +	{0x37a8, 0x4c},
> > +	{0x37a9, 0x4c},
> > +	{0x3760, 0x00},
> > +	{0x376f, 0x01},
> > +	{0x37aa, 0x44},
> > +	{0x37ab, 0x2e},
> > +	{0x37ac, 0x2e},
> > +	{0x37ad, 0x33},
> > +	{0x37ae, 0x0d},
> > +	{0x37af, 0x0d},
> > +	{0x37b0, 0x00},
> > +	{0x37b1, 0x00},
> > +	{0x37b2, 0x00},
> > +	{0x37b3, 0x42},
> > +	{0x37b4, 0x42},
> > +	{0x37b5, 0x33},
> > +	{0x37b6, 0x00},
> > +	{0x37b7, 0x00},
> > +	{0x37b8, 0x00},
> > +	{0x37b9, 0xff},
> > +	{0x3800, 0x00},
> > +	{0x3801, 0x0c},
> > +	{0x3802, 0x00},
> > +	{0x3803, 0x0c},
> > +	{0x3804, 0x0c},
> > +	{0x3805, 0xd3},
> > +	{0x3806, 0x09},
> > +	{0x3807, 0xa3},
> > +	{0x3808, 0x06},
> > +	{0x3809, 0x60},
> > +	{0x380a, 0x04},
> > +	{0x380b, 0xc8},
> > +	{0x380c, 0x07},
> > +	{0x380d, 0x88},
> > +	{0x380e, 0x04},
> > +	{0x380f, 0xdc},
> > +	{0x3810, 0x00},
> > +	{0x3811, 0x04},
> > +	{0x3813, 0x02},
> > +	{0x3814, 0x03},
> > +	{0x3815, 0x01},
> > +	{0x3820, 0x00},
> > +	{0x3821, 0x67},
> > +	{0x382a, 0x03},
> > +	{0x382b, 0x01},
> > +	{0x3830, 0x08},
> > +	{0x3836, 0x02},
> > +	{0x3837, 0x18},
> > +	{0x3841, 0xff},
> > +	{0x3846, 0x48},
> > +	{0x3d85, 0x14},
> > +	{0x3f08, 0x08},
> > +	{0x3f0a, 0x80},
> > +	{0x4000, 0xf1},
> > +	{0x4001, 0x10},
> > +	{0x4005, 0x10},
> > +	{0x4002, 0x27},
> > +	{0x4009, 0x81},
> > +	{0x400b, 0x0c},
> > +	{0x401b, 0x00},
> > +	{0x401d, 0x00},
> > +	{0x4020, 0x00},
> > +	{0x4021, 0x04},
> > +	{0x4022, 0x04},
> > +	{0x4023, 0xb9},
> > +	{0x4024, 0x05},
> > +	{0x4025, 0x2a},
> > +	{0x4026, 0x05},
> > +	{0x4027, 0x2b},
> > +	{0x4028, 0x00},
> > +	{0x4029, 0x02},
> > +	{0x402a, 0x04},
> > +	{0x402b, 0x04},
> > +	{0x402c, 0x02},
> > +	{0x402d, 0x02},
> > +	{0x402e, 0x08},
> > +	{0x402f, 0x02},
> > +	{0x401f, 0x00},
> > +	{0x4034, 0x3f},
> > +	{0x403d, 0x04},
> > +	{0x4300, 0xff},
> > +	{0x4301, 0x00},
> > +	{0x4302, 0x0f},
> > +	{0x4316, 0x00},
> > +	{0x4500, 0x38},
> > +	{0x4503, 0x18},
> > +	{0x4600, 0x00},
> > +	{0x4601, 0xcb},
> > +	{0x481f, 0x32},
> > +	{0x4837, 0x16},
> > +	{0x4850, 0x10},
> > +	{0x4851, 0x32},
> > +	{0x4b00, 0x2a},
> > +	{0x4b0d, 0x00},
> > +	{0x4d00, 0x04},
> > +	{0x4d01, 0x18},
> > +	{0x4d02, 0xc3},
> > +	{0x4d03, 0xff},
> > +	{0x4d04, 0xff},
> > +	{0x4d05, 0xff},
> > +	{0x5000, 0x7e},
> > +	{0x5001, 0x01},
> > +	{0x5002, 0x08},
> > +	{0x5003, 0x20},
> > +	{0x5046, 0x12},
> > +	{0x5901, 0x00},
> > +	{0x5e00, 0x00},
> > +	{0x5e01, 0x41},
> > +	{0x382d, 0x7f},
> > +	{0x4825, 0x3a},
> > +	{0x4826, 0x40},
> > +	{0x4808, 0x25},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +static const struct regval ov8858_global_regs_r2a_2lane[] = {
> > +	/*
> > +	 * MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz.
> > +	 * v00_01_00 (05/29/2014) : initial setting
> > +	 * AM19 : 3617 <- 0xC0
> > +	 * AM20 : change FWC_6K_EN to be default 0x3618=0x5a
> > +	 */
> > +	{0x0103, 0x01}, // software reset
> > +	{0x0100, 0x00}, // software standby
> > +	{0x0302, 0x1e}, // pll1_multi
> > +	{0x0303, 0x00}, // pll1_divm
> > +	{0x0304, 0x03}, // pll1_div_mipi
> > +	{0x030e, 0x02}, // pll2_rdiv
> > +	{0x030f, 0x04}, // pll2_divsp
> > +	{0x0312, 0x03}, // pll2_pre_div0, pll2_r_divdac
> > +	{0x031e, 0x0c}, // pll1_no_lat
> > +	{0x3600, 0x00},
> > +	{0x3601, 0x00},
> > +	{0x3602, 0x00},
> > +	{0x3603, 0x00},
> > +	{0x3604, 0x22},
> > +	{0x3605, 0x20},
> > +	{0x3606, 0x00},
> > +	{0x3607, 0x20},
> > +	{0x3608, 0x11},
> > +	{0x3609, 0x28},
> > +	{0x360a, 0x00},
> > +	{0x360b, 0x05},
> > +	{0x360c, 0xd4},
> > +	{0x360d, 0x40},
> > +	{0x360e, 0x0c},
> > +	{0x360f, 0x20},
> > +	{0x3610, 0x07},
> > +	{0x3611, 0x20},
> > +	{0x3612, 0x88},
> > +	{0x3613, 0x80},
> > +	{0x3614, 0x58},
> > +	{0x3615, 0x00},
> > +	{0x3616, 0x4a},
> > +	{0x3617, 0x90},
> > +	{0x3618, 0x5a},
> > +	{0x3619, 0x70},
> > +	{0x361a, 0x99},
> > +	{0x361b, 0x0a},
> > +	{0x361c, 0x07},
> > +	{0x361d, 0x00},
> > +	{0x361e, 0x00},
> > +	{0x361f, 0x00},
> > +	{0x3638, 0xff},
> > +	{0x3633, 0x0f},
> > +	{0x3634, 0x0f},
> > +	{0x3635, 0x0f},
> > +	{0x3636, 0x12},
> > +	{0x3645, 0x13},
> > +	{0x3646, 0x83},
> > +	{0x364a, 0x07},
> > +	{0x3015, 0x00},
> > +	{0x3018, 0x32}, // MIPI 2 lane
> > +	{0x3020, 0x93}, // Clock switch output normal, pclk_div =/1
> > +	{0x3022, 0x01}, // pd_mipi enable when rst_sync
> > +	{0x3031, 0x0a}, // MIPI 10-bit mode
> > +	{0x3034, 0x00},
> > +	{0x3106, 0x01}, // sclk_div, sclk_pre_div
> > +	{0x3305, 0xf1},
> > +	{0x3308, 0x00},
> > +	{0x3309, 0x28},
> > +	{0x330a, 0x00},
> > +	{0x330b, 0x20},
> > +	{0x330c, 0x00},
> > +	{0x330d, 0x00},
> > +	{0x330e, 0x00},
> > +	{0x330f, 0x40},
> > +	{0x3307, 0x04},
> > +	{0x3500, 0x00}, // exposure H
> > +	{0x3501, 0x4d}, // exposure M
> > +	{0x3502, 0x40}, // exposure L
> > +	{0x3503, 0x80}, // gain delay ?, exposure delay 1 frame, real gain
> > +	{0x3505, 0x80}, // gain option
> > +	{0x3508, 0x02}, // gain H
> > +	{0x3509, 0x00}, // gain L
> > +	{0x350c, 0x00}, // short gain H
> > +	{0x350d, 0x80}, // short gain L
> > +	{0x3510, 0x00}, // short exposure H
> > +	{0x3511, 0x02}, // short exposure M
> > +	{0x3512, 0x00}, // short exposure L
> > +	{0x3700, 0x18},
> > +	{0x3701, 0x0c},
> > +	{0x3702, 0x28},
> > +	{0x3703, 0x19},
> > +	{0x3704, 0x14},
> > +	{0x3705, 0x00},
> > +	{0x3706, 0x82},
> > +	{0x3707, 0x04},
> > +	{0x3708, 0x24},
> > +	{0x3709, 0x33},
> > +	{0x370a, 0x01},
> > +	{0x370b, 0x82},
> > +	{0x370c, 0x04},
> > +	{0x3718, 0x12},
> > +	{0x3719, 0x31},
> > +	{0x3712, 0x42},
> > +	{0x3714, 0x24},
> > +	{0x371e, 0x19},
> > +	{0x371f, 0x40},
> > +	{0x3720, 0x05},
> > +	{0x3721, 0x05},
> > +	{0x3724, 0x06},
> > +	{0x3725, 0x01},
> > +	{0x3726, 0x06},
> > +	{0x3728, 0x05},
> > +	{0x3729, 0x02},
> > +	{0x372a, 0x03},
> > +	{0x372b, 0x53},
> > +	{0x372c, 0xa3},
> > +	{0x372d, 0x53},
> > +	{0x372e, 0x06},
> > +	{0x372f, 0x10},
> > +	{0x3730, 0x01},
> > +	{0x3731, 0x06},
> > +	{0x3732, 0x14},
> > +	{0x3733, 0x10},
> > +	{0x3734, 0x40},
> > +	{0x3736, 0x20},
> > +	{0x373a, 0x05},
> > +	{0x373b, 0x06},
> > +	{0x373c, 0x0a},
> > +	{0x373e, 0x03},
> > +	{0x3750, 0x0a},
> > +	{0x3751, 0x0e},
> > +	{0x3755, 0x10},
> > +	{0x3758, 0x00},
> > +	{0x3759, 0x4c},
> > +	{0x375a, 0x06},
> > +	{0x375b, 0x13},
> > +	{0x375c, 0x20},
> > +	{0x375d, 0x02},
> > +	{0x375e, 0x00},
> > +	{0x375f, 0x14},
> > +	{0x3768, 0x22},
> > +	{0x3769, 0x44},
> > +	{0x376a, 0x44},
> > +	{0x3761, 0x00},
> > +	{0x3762, 0x00},
> > +	{0x3763, 0x00},
> > +	{0x3766, 0xff},
> > +	{0x376b, 0x00},
> > +	{0x3772, 0x23},
> > +	{0x3773, 0x02},
> > +	{0x3774, 0x16},
> > +	{0x3775, 0x12},
> > +	{0x3776, 0x04},
> > +	{0x3777, 0x00},
> > +	{0x3778, 0x17},
> > +	{0x37a0, 0x44},
> > +	{0x37a1, 0x3d},
> > +	{0x37a2, 0x3d},
> > +	{0x37a3, 0x00},
> > +	{0x37a4, 0x00},
> > +	{0x37a5, 0x00},
> > +	{0x37a6, 0x00},
> > +	{0x37a7, 0x44},
> > +	{0x37a8, 0x4c},
> > +	{0x37a9, 0x4c},
> > +	{0x3760, 0x00},
> > +	{0x376f, 0x01},
> > +	{0x37aa, 0x44},
> > +	{0x37ab, 0x2e},
> > +	{0x37ac, 0x2e},
> > +	{0x37ad, 0x33},
> > +	{0x37ae, 0x0d},
> > +	{0x37af, 0x0d},
> > +	{0x37b0, 0x00},
> > +	{0x37b1, 0x00},
> > +	{0x37b2, 0x00},
> > +	{0x37b3, 0x42},
> > +	{0x37b4, 0x42},
> > +	{0x37b5, 0x31},
> > +	{0x37b6, 0x00},
> > +	{0x37b7, 0x00},
> > +	{0x37b8, 0x00},
> > +	{0x37b9, 0xff},
> > +	{0x3800, 0x00}, // x start H
> > +	{0x3801, 0x0c}, // x start L
> > +	{0x3802, 0x00}, // y start H
> > +	{0x3803, 0x0c}, // y start L
> > +	{0x3804, 0x0c}, // x end H
> > +	{0x3805, 0xd3}, // x end L
> > +	{0x3806, 0x09}, // y end H
> > +	{0x3807, 0xa3}, // y end L
> > +	{0x3808, 0x06}, // x output size H
> > +	{0x3809, 0x60}, // x output size L
> > +	{0x380a, 0x04}, // y output size H
> > +	{0x380b, 0xc8}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x88}, // HTS L
> > +	{0x380e, 0x04}, // VTS H
> > +	{0x380f, 0xdc}, // VTS L
> > +	{0x3810, 0x00}, // ISP x win H
> > +	{0x3811, 0x04}, // ISP x win L
> > +	{0x3813, 0x02}, // ISP y win L
> > +	{0x3814, 0x03}, // x odd inc
> > +	{0x3815, 0x01}, // x even inc
> > +	{0x3820, 0x00}, // vflip off
> > +	{0x3821, 0x67}, // mirror on, bin on
> > +	{0x382a, 0x03}, // y odd inc
> > +	{0x382b, 0x01}, // y even inc
> > +	{0x3830, 0x08},
> > +	{0x3836, 0x02},
> > +	{0x3837, 0x18},
> > +	{0x3841, 0xff}, // window auto size enable
> > +	{0x3846, 0x48},
> > +	{0x3d85, 0x16}, // OTP power up load data enable with BIST
> > +	{0x3d8c, 0x73}, // OTP setting start High
> > +	{0x3d8d, 0xde}, // OTP setting start Low
> > +	{0x3f08, 0x08},
> > +	{0x3f0a, 0x00},
> > +	{0x4000, 0xf1}, // out_range_trig, format_chg_trig
> > +	{0x4001, 0x10}, // total 128 black column
> > +	{0x4005, 0x10}, // BLC target L
> > +	{0x4002, 0x27}, // value used to limit BLC offset
> > +	{0x4009, 0x81}, // final BLC offset limitation enable
> > +	{0x400b, 0x0c}, // DCBLC on, DCBLC manual mode on
> > +	{0x401b, 0x00}, // zero line R coefficient
> > +	{0x401d, 0x00}, // zoro line T coefficient
> > +	{0x4020, 0x00}, // Anchor left start H
> > +	{0x4021, 0x04}, // Anchor left start L
> > +	{0x4022, 0x06}, // Anchor left end H
> > +	{0x4023, 0x00}, // Anchor left end L
> > +	{0x4024, 0x0f}, // Anchor right start H
> > +	{0x4025, 0x2a}, // Anchor right start L
> > +	{0x4026, 0x0f}, // Anchor right end H
> > +	{0x4027, 0x2b}, // Anchor right end L
> > +	{0x4028, 0x00}, // top zero line start
> > +	{0x4029, 0x02}, // top zero line number
> > +	{0x402a, 0x04}, // top black line start
> > +	{0x402b, 0x04}, // top black line number
> > +	{0x402c, 0x00}, // bottom zero line start
> > +	{0x402d, 0x02}, // bottom zoro line number
> > +	{0x402e, 0x04}, // bottom black line start
> > +	{0x402f, 0x04}, // bottom black line number
> > +	{0x401f, 0x00}, // interpolation x/y disable, Anchor one disable
> > +	{0x4034, 0x3f},
> > +	{0x403d, 0x04}, // md_precision_en
> > +	{0x4300, 0xff}, // clip max H
> > +	{0x4301, 0x00}, // clip min H
> > +	{0x4302, 0x0f}, // clip min L, clip max L
> > +	{0x4316, 0x00},
> > +	{0x4500, 0x58},
> > +	{0x4503, 0x18},
> > +	{0x4600, 0x00},
> > +	{0x4601, 0xcb},
> > +	{0x481f, 0x32}, // clk prepare min
> > +	{0x4837, 0x16}, // global timing
> > +	{0x4850, 0x10}, // lane 1 = 1, lane 0 = 0
> > +	{0x4851, 0x32}, // lane 3 = 3, lane 2 = 2
> > +	{0x4b00, 0x2a},
> > +	{0x4b0d, 0x00},
> > +	{0x4d00, 0x04}, // temperature sensor
> > +	{0x4d01, 0x18},
> > +	{0x4d02, 0xc3},
> > +	{0x4d03, 0xff},
> > +	{0x4d04, 0xff},
> > +	{0x4d05, 0xff}, // temperature sensor
> > +	{0x5000, 0xfe}, // lenc on, slave/master AWB gain/statistics enable
> > +	{0x5001, 0x01}, // BLC on
> > +	{0x5002, 0x08}, // H scale off, WBMATCH off, OTP_DPC
> > +	{0x5003, 0x20}, // DPC_DBC buffer control enable, WB
> > +	{0x501e, 0x93}, // enable digital gain
> > +	{0x5046, 0x12},
> > +	{0x5780, 0x3e}, // DPC
> > +	{0x5781, 0x0f},
> > +	{0x5782, 0x44},
> > +	{0x5783, 0x02},
> > +	{0x5784, 0x01},
> > +	{0x5785, 0x00},
> > +	{0x5786, 0x00},
> > +	{0x5787, 0x04},
> > +	{0x5788, 0x02},
> > +	{0x5789, 0x0f},
> > +	{0x578a, 0xfd},
> > +	{0x578b, 0xf5},
> > +	{0x578c, 0xf5},
> > +	{0x578d, 0x03},
> > +	{0x578e, 0x08},
> > +	{0x578f, 0x0c},
> > +	{0x5790, 0x08},
> > +	{0x5791, 0x04},
> > +	{0x5792, 0x00},
> > +	{0x5793, 0x52},
> > +	{0x5794, 0xa3}, // DPC
> > +	{0x5871, 0x0d}, // Lenc
> > +	{0x5870, 0x18},
> > +	{0x586e, 0x10},
> > +	{0x586f, 0x08},
> > +	{0x58f7, 0x01},
> > +	{0x58f8, 0x3d}, // Lenc
> > +	{0x5901, 0x00}, // H skip off, V skip off
> > +	{0x5b00, 0x02}, // OTP DPC start address
> > +	{0x5b01, 0x10}, // OTP DPC start address
> > +	{0x5b02, 0x03}, // OTP DPC end address
> > +	{0x5b03, 0xcf}, // OTP DPC end address
> > +	{0x5b05, 0x6c}, // recover method = 2b11,
> > +	{0x5e00, 0x00}, // use 0x3ff to test pattern off
> > +	{0x5e01, 0x41}, // window cut enable
> > +	{0x382d, 0x7f},
> > +	{0x4825, 0x3a}, // lpx_p_min
> > +	{0x4826, 0x40}, // hs_prepare_min
> > +	{0x4808, 0x25}, // wake up delay in 1/1024 s
> > +	{0x3763, 0x18},
> > +	{0x3768, 0xcc},
> > +	{0x470b, 0x28},
> > +	{0x4202, 0x00},
> > +	{0x400d, 0x10}, // BLC offset trigger L
> > +	{0x4040, 0x04}, // BLC gain th2
> > +	{0x403e, 0x04}, // BLC gain th1
> > +	{0x4041, 0xc6}, // BLC
> > +	{0x3007, 0x80},
> > +	{0x400a, 0x01},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +/*
> > + * Xclk 24Mhz
> > + * max_framerate 30fps
> > + * mipi_datarate per lane 720Mbps
> > + */
> > +static const struct regval ov8858_1632x1224_regs_2lane[] = {
> > +	/*
> > +	 * MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz.
> > +	 * v00_01_00 (05/29/2014) : initial setting
> > +	 * AM19 : 3617 <- 0xC0
> > +	 * AM20 : change FWC_6K_EN to be default 0x3618=0x5a
> > +	 */
> > +	{0x0100, 0x00},
> > +	{0x3501, 0x4d}, // exposure M
> > +	{0x3502, 0x40}, // exposure L
> > +	{0x3778, 0x17},
> > +	{0x3808, 0x06}, // x output size H
> > +	{0x3809, 0x60}, // x output size L
> > +	{0x380a, 0x04}, // y output size H
> > +	{0x380b, 0xc8}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x88}, // HTS L
> > +	{0x380e, 0x04}, // VTS H
> > +	{0x380f, 0xdc}, // VTS L
> > +	{0x3814, 0x03}, // x odd inc
> > +	{0x3821, 0x67}, // mirror on, bin on
> > +	{0x382a, 0x03}, // y odd inc
> > +	{0x3830, 0x08},
> > +	{0x3836, 0x02},
> > +	{0x3f0a, 0x00},
> > +	{0x4001, 0x10}, // total 128 black column
> > +	{0x4022, 0x06}, // Anchor left end H
> > +	{0x4023, 0x00}, // Anchor left end L
> > +	{0x4025, 0x2a}, // Anchor right start L
> > +	{0x4027, 0x2b}, // Anchor right end L
> > +	{0x402b, 0x04}, // top black line number
> > +	{0x402f, 0x04}, // bottom black line number
> > +	{0x4500, 0x58},
> > +	{0x4600, 0x00},
> > +	{0x4601, 0xcb},
> > +	{0x382d, 0x7f},
> > +	{0x0100, 0x01},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +/*
> > + * Xclk 24Mhz
> > + * max_framerate 15fps
> > + * mipi_datarate per lane 720Mbps
> > + */
> > +static const struct regval ov8858_3264x2448_regs_2lane[] = {
> > +	{0x0100, 0x00},
> > +	{0x3501, 0x9a}, // exposure M
> > +	{0x3502, 0x20}, // exposure L
> > +	{0x3778, 0x1a},
> > +	{0x3808, 0x0c}, // x output size H
> > +	{0x3809, 0xc0}, // x output size L
> > +	{0x380a, 0x09}, // y output size H
> > +	{0x380b, 0x90}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x94}, // HTS L
> > +	{0x380e, 0x09}, // VTS H
> > +	{0x380f, 0xaa}, // VTS L
> > +	{0x3814, 0x01}, // x odd inc
> > +	{0x3821, 0x46}, // mirror on, bin off
> > +	{0x382a, 0x01}, // y odd inc
> > +	{0x3830, 0x06},
> > +	{0x3836, 0x01},
> > +	{0x3f0a, 0x00},
> > +	{0x4001, 0x00}, // total 256 black column
> > +	{0x4022, 0x0c}, // Anchor left end H
> > +	{0x4023, 0x60}, // Anchor left end L
> > +	{0x4025, 0x36}, // Anchor right start L
> > +	{0x4027, 0x37}, // Anchor right end L
> > +	{0x402b, 0x08}, // top black line number
> > +	{0x402f, 0x08}, // bottom black line number
> > +	{0x4500, 0x58},
> > +	{0x4600, 0x01},
> > +	{0x4601, 0x97},
> > +	{0x382d, 0xff},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +static const struct regval ov8858_global_regs_r2a_4lane[] = {
> > +	/*
> > +	 * MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz.
> > +	 * v00_01_00 (05/29/2014) : initial setting
> > +	 * AM19 : 3617 <- 0xC0
> > +	 * AM20 : change FWC_6K_EN to be default 0x3618=0x5a
> > +	 */
> > +	{0x0103, 0x01}, // software reset for OVTATool only
> > +	{0x0103, 0x01}, // software reset
> > +	{0x0100, 0x00}, // software standby
> > +	{0x0302, 0x1e}, // pll1_multi
> > +	{0x0303, 0x00}, // pll1_divm
> > +	{0x0304, 0x03}, // pll1_div_mipi
> > +	{0x030e, 0x00}, // pll2_rdiv
> > +	{0x030f, 0x04}, // pll2_divsp
> > +	{0x0312, 0x01}, // pll2_pre_div0, pll2_r_divdac
> > +	{0x031e, 0x0c}, // pll1_no_lat
> > +	{0x3600, 0x00},
> > +	{0x3601, 0x00},
> > +	{0x3602, 0x00},
> > +	{0x3603, 0x00},
> > +	{0x3604, 0x22},
> > +	{0x3605, 0x20},
> > +	{0x3606, 0x00},
> > +	{0x3607, 0x20},
> > +	{0x3608, 0x11},
> > +	{0x3609, 0x28},
> > +	{0x360a, 0x00},
> > +	{0x360b, 0x05},
> > +	{0x360c, 0xd4},
> > +	{0x360d, 0x40},
> > +	{0x360e, 0x0c},
> > +	{0x360f, 0x20},
> > +	{0x3610, 0x07},
> > +	{0x3611, 0x20},
> > +	{0x3612, 0x88},
> > +	{0x3613, 0x80},
> > +	{0x3614, 0x58},
> > +	{0x3615, 0x00},
> > +	{0x3616, 0x4a},
> > +	{0x3617, 0x90},
> > +	{0x3618, 0x5a},
> > +	{0x3619, 0x70},
> > +	{0x361a, 0x99},
> > +	{0x361b, 0x0a},
> > +	{0x361c, 0x07},
> > +	{0x361d, 0x00},
> > +	{0x361e, 0x00},
> > +	{0x361f, 0x00},
> > +	{0x3638, 0xff},
> > +	{0x3633, 0x0f},
> > +	{0x3634, 0x0f},
> > +	{0x3635, 0x0f},
> > +	{0x3636, 0x12},
> > +	{0x3645, 0x13},
> > +	{0x3646, 0x83},
> > +	{0x364a, 0x07},
> > +	{0x3015, 0x01},
> > +	{0x3018, 0x72}, // MIPI 4 lane
> > +	{0x3020, 0x93}, // Clock switch output normal, pclk_div =/1
> > +	{0x3022, 0x01}, // pd_mipi enable when rst_sync
> > +	{0x3031, 0x0a}, // MIPI 10-bit mode
> > +	{0x3034, 0x00},
> > +	{0x3106, 0x01}, // sclk_div, sclk_pre_div
> > +	{0x3305, 0xf1},
> > +	{0x3308, 0x00},
> > +	{0x3309, 0x28},
> > +	{0x330a, 0x00},
> > +	{0x330b, 0x20},
> > +	{0x330c, 0x00},
> > +	{0x330d, 0x00},
> > +	{0x330e, 0x00},
> > +	{0x330f, 0x40},
> > +	{0x3307, 0x04},
> > +	{0x3500, 0x00}, // exposure H
> > +	{0x3501, 0x4d}, // exposure M
> > +	{0x3502, 0x40}, // exposure L
> > +	{0x3503, 0x80}, // gain delay ?, exposure delay 1 frame, real gain
> > +	{0x3505, 0x80}, // gain option
> > +	{0x3508, 0x02}, // gain H
> > +	{0x3509, 0x00}, // gain L
> > +	{0x350c, 0x00}, // short gain H
> > +	{0x350d, 0x80}, // short gain L
> > +	{0x3510, 0x00}, // short exposure H
> > +	{0x3511, 0x02}, // short exposure M
> > +	{0x3512, 0x00}, // short exposure L
> > +	{0x3700, 0x30},
> > +	{0x3701, 0x18},
> > +	{0x3702, 0x50},
> > +	{0x3703, 0x32},
> > +	{0x3704, 0x28},
> > +	{0x3705, 0x00},
> > +	{0x3706, 0x82},
> > +	{0x3707, 0x08},
> > +	{0x3708, 0x48},
> > +	{0x3709, 0x66},
> > +	{0x370a, 0x01},
> > +	{0x370b, 0x82},
> > +	{0x370c, 0x07},
> > +	{0x3718, 0x14},
> > +	{0x3719, 0x31},
> > +	{0x3712, 0x44},
> > +	{0x3714, 0x24},
> > +	{0x371e, 0x31},
> > +	{0x371f, 0x7f},
> > +	{0x3720, 0x0a},
> > +	{0x3721, 0x0a},
> > +	{0x3724, 0x0c},
> > +	{0x3725, 0x02},
> > +	{0x3726, 0x0c},
> > +	{0x3728, 0x0a},
> > +	{0x3729, 0x03},
> > +	{0x372a, 0x06},
> > +	{0x372b, 0xa6},
> > +	{0x372c, 0xa6},
> > +	{0x372d, 0xa6},
> > +	{0x372e, 0x0c},
> > +	{0x372f, 0x20},
> > +	{0x3730, 0x02},
> > +	{0x3731, 0x0c},
> > +	{0x3732, 0x28},
> > +	{0x3733, 0x10},
> > +	{0x3734, 0x40},
> > +	{0x3736, 0x30},
> > +	{0x373a, 0x0a},
> > +	{0x373b, 0x0b},
> > +	{0x373c, 0x14},
> > +	{0x373e, 0x06},
> > +	{0x3750, 0x0a},
> > +	{0x3751, 0x0e},
> > +	{0x3755, 0x10},
> > +	{0x3758, 0x00},
> > +	{0x3759, 0x4c},
> > +	{0x375a, 0x0c},
> > +	{0x375b, 0x26},
> > +	{0x375c, 0x20},
> > +	{0x375d, 0x04},
> > +	{0x375e, 0x00},
> > +	{0x375f, 0x28},
> > +	{0x3768, 0x22},
> > +	{0x3769, 0x44},
> > +	{0x376a, 0x44},
> > +	{0x3761, 0x00},
> > +	{0x3762, 0x00},
> > +	{0x3763, 0x00},
> > +	{0x3766, 0xff},
> > +	{0x376b, 0x00},
> > +	{0x3772, 0x46},
> > +	{0x3773, 0x04},
> > +	{0x3774, 0x2c},
> > +	{0x3775, 0x13},
> > +	{0x3776, 0x08},
> > +	{0x3777, 0x00},
> > +	{0x3778, 0x17},
> > +	{0x37a0, 0x88},
> > +	{0x37a1, 0x7a},
> > +	{0x37a2, 0x7a},
> > +	{0x37a3, 0x00},
> > +	{0x37a4, 0x00},
> > +	{0x37a5, 0x00},
> > +	{0x37a6, 0x00},
> > +	{0x37a7, 0x88},
> > +	{0x37a8, 0x98},
> > +	{0x37a9, 0x98},
> > +	{0x3760, 0x00},
> > +	{0x376f, 0x01},
> > +	{0x37aa, 0x88},
> > +	{0x37ab, 0x5c},
> > +	{0x37ac, 0x5c},
> > +	{0x37ad, 0x55},
> > +	{0x37ae, 0x19},
> > +	{0x37af, 0x19},
> > +	{0x37b0, 0x00},
> > +	{0x37b1, 0x00},
> > +	{0x37b2, 0x00},
> > +	{0x37b3, 0x84},
> > +	{0x37b4, 0x84},
> > +	{0x37b5, 0x60},
> > +	{0x37b6, 0x00},
> > +	{0x37b7, 0x00},
> > +	{0x37b8, 0x00},
> > +	{0x37b9, 0xff},
> > +	{0x3800, 0x00}, // x start H
> > +	{0x3801, 0x0c}, // x start L
> > +	{0x3802, 0x00}, // y start H
> > +	{0x3803, 0x0c}, // y start L
> > +	{0x3804, 0x0c}, // x end H
> > +	{0x3805, 0xd3}, // x end L
> > +	{0x3806, 0x09}, // y end H
> > +	{0x3807, 0xa3}, // y end L
> > +	{0x3808, 0x06}, // x output size H
> > +	{0x3809, 0x60}, // x output size L
> > +	{0x380a, 0x04}, // y output size H
> > +	{0x380b, 0xc8}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x88}, // HTS L
> > +	{0x380e, 0x04}, // VTS H
> > +	{0x380f, 0xdc}, // VTS L
> > +	{0x3810, 0x00}, // ISP x win H
> > +	{0x3811, 0x04}, // ISP x win L
> > +	{0x3813, 0x02}, // ISP y win L
> > +	{0x3814, 0x03}, // x odd inc
> > +	{0x3815, 0x01}, // x even inc
> > +	{0x3820, 0x00}, // vflip off
> > +	{0x3821, 0x67}, // mirror on, bin o
> > +	{0x382a, 0x03}, // y odd inc
> > +	{0x382b, 0x01}, // y even inc
> > +	{0x3830, 0x08},
> > +	{0x3836, 0x02},
> > +	{0x3837, 0x18},
> > +	{0x3841, 0xff}, // window auto size enable
> > +	{0x3846, 0x48},
> > +	{0x3d85, 0x16}, // OTP power up load data/setting enable
> > +	{0x3d8c, 0x73}, // OTP setting start High
> > +	{0x3d8d, 0xde}, // OTP setting start Low
> > +	{0x3f08, 0x10},
> > +	{0x3f0a, 0x00},
> > +	{0x4000, 0xf1}, // out_range/format_chg/gain/exp_chg trig enable
> > +	{0x4001, 0x10}, // total 128 black column
> > +	{0x4005, 0x10}, // BLC target L
> > +	{0x4002, 0x27}, // value used to limit BLC offset
> > +	{0x4009, 0x81}, // final BLC offset limitation enable
> > +	{0x400b, 0x0c}, // DCBLC on, DCBLC manual mode on
> > +	{0x401b, 0x00}, // zero line R coefficient
> > +	{0x401d, 0x00}, // zoro line T coefficient
> > +	{0x4020, 0x00}, // Anchor left start H
> > +	{0x4021, 0x04}, // Anchor left start L
> > +	{0x4022, 0x06}, // Anchor left end H
> > +	{0x4023, 0x00}, // Anchor left end L
> > +	{0x4024, 0x0f}, // Anchor right start H
> > +	{0x4025, 0x2a}, // Anchor right start L
> > +	{0x4026, 0x0f}, // Anchor right end H
> > +	{0x4027, 0x2b}, // Anchor right end L
> > +	{0x4028, 0x00}, // top zero line start
> > +	{0x4029, 0x02}, // top zero line number
> > +	{0x402a, 0x04}, // top black line start
> > +	{0x402b, 0x04}, // top black line number
> > +	{0x402c, 0x00}, // bottom zero line start
> > +	{0x402d, 0x02}, // bottom zoro line number
> > +	{0x402e, 0x04}, // bottom black line start
> > +	{0x402f, 0x04}, // bottom black line number
> > +	{0x401f, 0x00}, // interpolation x/y disable, Anchor one disable
> > +	{0x4034, 0x3f},
> > +	{0x403d, 0x04}, // md_precision_en
> > +	{0x4300, 0xff}, // clip max H
> > +	{0x4301, 0x00}, // clip min H
> > +	{0x4302, 0x0f}, // clip min L, clip max L
> > +	{0x4316, 0x00},
> > +	{0x4500, 0x58},
> > +	{0x4503, 0x18},
> > +	{0x4600, 0x00},
> > +	{0x4601, 0xcb},
> > +	{0x481f, 0x32}, // clk prepare min
> > +	{0x4837, 0x16}, // global timing
> > +	{0x4850, 0x10}, // lane 1 = 1, lane 0 = 0
> > +	{0x4851, 0x32}, // lane 3 = 3, lane 2 = 2
> > +	{0x4b00, 0x2a},
> > +	{0x4b0d, 0x00},
> > +	{0x4d00, 0x04}, // temperature sensor
> > +	{0x4d01, 0x18},
> > +	{0x4d02, 0xc3},
> > +	{0x4d03, 0xff},
> > +	{0x4d04, 0xff},
> > +	{0x4d05, 0xff}, // temperature sensor
> > +	{0x5000, 0xfe}, // lenc on, slave/master AWB gain/statistics enable
> > +	{0x5001, 0x01}, // BLC on
> > +	{0x5002, 0x08}, // WBMATCH sensor's gain, H scale/WBMATCH/OTP_DPC off
> > +	{0x5003, 0x20}, // DPC_DBC buffer control enable, WB
> > +	{0x501e, 0x93}, // enable digital gain
> > +	{0x5046, 0x12},
> > +	{0x5780, 0x3e}, // DPC
> > +	{0x5781, 0x0f},
> > +	{0x5782, 0x44},
> > +	{0x5783, 0x02},
> > +	{0x5784, 0x01},
> > +	{0x5785, 0x00},
> > +	{0x5786, 0x00},
> > +	{0x5787, 0x04},
> > +	{0x5788, 0x02},
> > +	{0x5789, 0x0f},
> > +	{0x578a, 0xfd},
> > +	{0x578b, 0xf5},
> > +	{0x578c, 0xf5},
> > +	{0x578d, 0x03},
> > +	{0x578e, 0x08},
> > +	{0x578f, 0x0c},
> > +	{0x5790, 0x08},
> > +	{0x5791, 0x04},
> > +	{0x5792, 0x00},
> > +	{0x5793, 0x52},
> > +	{0x5794, 0xa3}, // DPC
> > +	{0x5871, 0x0d}, // Lenc
> > +	{0x5870, 0x18},
> > +	{0x586e, 0x10},
> > +	{0x586f, 0x08},
> > +	{0x58f7, 0x01},
> > +	{0x58f8, 0x3d}, // Lenc
> > +	{0x5901, 0x00}, // H skip off, V skip off
> > +	{0x5b00, 0x02}, // OTP DPC start address
> > +	{0x5b01, 0x10}, // OTP DPC start address
> > +	{0x5b02, 0x03}, // OTP DPC end address
> > +	{0x5b03, 0xcf}, // OTP DPC end address
> > +	{0x5b05, 0x6c}, // recover method = 2b11
> > +	{0x5e00, 0x00}, // use 0x3ff to test pattern off
> > +	{0x5e01, 0x41}, // window cut enable
> > +	{0x382d, 0x7f},
> > +	{0x4825, 0x3a}, // lpx_p_min
> > +	{0x4826, 0x40}, // hs_prepare_min
> > +	{0x4808, 0x25}, // wake up delay in 1/1024 s
> > +	{0x3763, 0x18},
> > +	{0x3768, 0xcc},
> > +	{0x470b, 0x28},
> > +	{0x4202, 0x00},
> > +	{0x400d, 0x10}, // BLC offset trigger L
> > +	{0x4040, 0x04}, // BLC gain th2
> > +	{0x403e, 0x04}, // BLC gain th1
> > +	{0x4041, 0xc6}, // BLC
> > +	{0x3007, 0x80},
> > +	{0x400a, 0x01},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +/*
> > + * Xclk 24Mhz
> > + * max_framerate 60fps
> > + * mipi_datarate per lane 720Mbps
> > + */
> > +static const struct regval ov8858_1632x1224_regs_4lane[] = {
> > +	{0x0100, 0x00},
> > +	{0x3501, 0x4d}, // exposure M
> > +	{0x3502, 0x40}, // exposure L
> > +	{0x3808, 0x06}, // x output size H
> > +	{0x3809, 0x60}, // x output size L
> > +	{0x380a, 0x04}, // y output size H
> > +	{0x380b, 0xc8}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x88}, // HTS L
> > +	{0x380e, 0x04}, // VTS H
> > +	{0x380f, 0xdc}, // VTS L
> > +	{0x3814, 0x03}, // x odd inc
> > +	{0x3821, 0x67}, // mirror on, bin on
> > +	{0x382a, 0x03}, // y odd inc
> > +	{0x3830, 0x08},
> > +	{0x3836, 0x02},
> > +	{0x3f0a, 0x00},
> > +	{0x4001, 0x10}, // total 128 black column
> > +	{0x4022, 0x06}, // Anchor left end H
> > +	{0x4023, 0x00}, // Anchor left end L
> > +	{0x4025, 0x2a}, // Anchor right start L
> > +	{0x4027, 0x2b}, // Anchor right end L
> > +	{0x402b, 0x04}, // top black line number
> > +	{0x402f, 0x04}, // bottom black line number
> > +	{0x4500, 0x58},
> > +	{0x4600, 0x00},
> > +	{0x4601, 0xcb},
> > +	{0x382d, 0x7f},
> > +	{0x0100, 0x01},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +/*
> > + * Xclk 24Mhz
> > + * max_framerate 30fps
> > + * mipi_datarate per lane 720Mbps
> > + */
> > +static const struct regval ov8858_3264x2448_regs_4lane[] = {
> > +	{0x0100, 0x00},
> > +	{0x3501, 0x9a}, // exposure M
> > +	{0x3502, 0x20}, // exposure L
> > +	{0x3808, 0x0c}, // x output size H
> > +	{0x3809, 0xc0}, // x output size L
> > +	{0x380a, 0x09}, // y output size H
> > +	{0x380b, 0x90}, // y output size L
> > +	{0x380c, 0x07}, // HTS H
> > +	{0x380d, 0x94}, // HTS L
> > +	{0x380e, 0x09}, // VTS H
> > +	{0x380f, 0xaa}, // VTS L
> > +	{0x3814, 0x01}, // x odd inc
> > +	{0x3821, 0x46}, // mirror on, bin off
> > +	{0x382a, 0x01}, // y odd inc
> > +	{0x3830, 0x06},
> > +	{0x3836, 0x01},
> > +	{0x3f0a, 0x00},
> > +	{0x4001, 0x00}, // total 256 black column
> > +	{0x4022, 0x0c}, // Anchor left end H
> > +	{0x4023, 0x60}, // Anchor left end L
> > +	{0x4025, 0x36}, // Anchor right start L
> > +	{0x4027, 0x37}, // Anchor right end L
> > +	{0x402b, 0x08}, // top black line number
> > +	{0x402f, 0x08}, // interpolation x/y disable, Anchor one disable
> > +	{0x4500, 0x58},
> > +	{0x4600, 0x01},
> > +	{0x4601, 0x97},
> > +	{0x382d, 0xff},
> > +	{REG_NULL, 0x00},
> > +};
> > +
> > +static const struct ov8858_mode ov8858_modes[] = {
> > +	{
> > +		.width = 3264,
> > +		.height = 2448,
> > +		.exp_def = 2464,
> > +		.hts_def = 1940 * 2,
> > +		.vts_def = 2472,
> > +		.reg_modes = {
> > +			.mode_2lanes = ov8858_3264x2448_regs_2lane,
> > +			.mode_4lanes = ov8858_3264x2448_regs_4lane,
> > +		},
> > +	},
> > +	{
> > +		.width = 1632,
> > +		.height = 1224,
> > +		.exp_def = 1232,
> > +		.hts_def = 1928 * 2,
> > +		.vts_def = 1244,
> > +		.reg_modes = {
> > +			.mode_2lanes = ov8858_1632x1224_regs_2lane,
> > +			.mode_4lanes = ov8858_1632x1224_regs_4lane,
> > +		},
> > +	},
> > +};
> > +
> > +#define OV8858_NUM_MODES ARRAY_SIZE(ov8858_modes)
> > +
> > +static const s64 link_freq_menu_items[] = {
> > +	OV8858_LINK_FREQ
> > +};
> > +
> > +static const char * const ov8858_test_pattern_menu[] = {
> > +	"Disabled",
> > +	"Vertical Color Bar Type 1",
> > +	"Vertical Color Bar Type 2",
> > +	"Vertical Color Bar Type 3",
> > +	"Vertical Color Bar Type 4"
> > +};
> > +
> > +/* ----------------------------------------------------------------------------
> > + * HW access
> > + */
> > +
> > +static int ov8858_write(struct i2c_client *client, u32 reg, u32 val, int *err)
> > +{
> > +	unsigned int len = (reg >> OV8858_REG_SIZE_SHIFT) & 3;
> > +	u16 addr = reg & OV8858_REG_ADDR_MASK;
> > +	u8 buf[6];
> > +	int ret;
> > +
> > +	if (err && *err)
> > +		return *err;
> > +
> > +	put_unaligned_be16(addr, buf);
> > +	put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
> > +
> > +	ret = i2c_master_send(client, buf, len + 2);
> > +	if (ret != len + 2) {
> > +		ret = ret < 0 ? ret : -EIO;
> > +		if (err)
> > +			*err = ret;
> > +
> > +		dev_err(&client->dev,
> > +			"Failed to write reg %u: %d\n", addr, ret);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_write_array(struct i2c_client *client, const struct regval *regs)
> > +{
> > +	unsigned int i;
> > +	int ret = 0;
> > +
> > +	for (i = 0; ret == 0 && regs[i].addr != REG_NULL; ++i) {
> > +		ov8858_write(client, OV8858_REG_8BIT(regs[i].addr),
> > +			     regs[i].val, &ret);
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int ov8858_read_reg(struct i2c_client *client, u32 reg, u32 *val)
>
> ov8858_read() to match ov8858_write().
>

ah right

> > +{
> > +	__be16 reg_addr_be = cpu_to_be16(reg & OV8858_REG_ADDR_MASK);
> > +	unsigned int len = (reg >> OV8858_REG_SIZE_SHIFT) & 3;
> > +	struct i2c_msg msgs[2];
> > +	__be32 data_be = 0;
> > +	u8 *data_be_p;
> > +	int ret;
> > +
> > +	data_be_p = (u8 *)&data_be;
>
> I proposed
>
> 	u8 *data_be_p = (u8 *)&data_be;
>
> It's not mandatory if you don't like it, but as you didn't comment, I
> thought you may have just forgotten.
>

I prefer it this was to maintain the variable declaration order.
Shouldn't make any difference for the compiler ?

> > +
> > +	/* Write register address */
> > +	msgs[0].addr = client->addr;
> > +	msgs[0].flags = 0;
> > +	msgs[0].len = 2;
> > +	msgs[0].buf = (u8 *)&reg_addr_be;
> > +
> > +	/* Read data from register */
> > +	msgs[1].addr = client->addr;
> > +	msgs[1].flags = I2C_M_RD;
> > +	msgs[1].len = len;
> > +	msgs[1].buf = &data_be_p[4 - len];
> > +
> > +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> > +	if (ret != ARRAY_SIZE(msgs)) {
> > +		ret = ret < 0 ? ret : -EIO;
> > +		dev_err(&client->dev,
> > +			"Failed to read reg %u: %d\n", reg, ret);
> > +		return ret;
> > +	}
> > +
> > +	*val = be32_to_cpu(data_be);
> > +
> > +	return 0;
> > +}
> > +
> > +/* ----------------------------------------------------------------------------
> > + * Streaming
> > + */
> > +
> > +static int ov8858_start_stream(struct ov8858 *ov8858,
> > +			       struct v4l2_subdev_state *state)
> > +{
> > +	struct v4l2_mbus_framefmt *format;
> > +	const struct ov8858_mode *mode;
> > +	const struct regval *reg_list;
> > +	int ret;
> > +
> > +	ret = ov8858_write_array(ov8858->client, ov8858->global_regs);
> > +	if (ret)
> > +		return ret;
> > +
> > +	format = v4l2_subdev_get_pad_format(&ov8858->subdev, state, 0);
> > +	mode = v4l2_find_nearest_size(ov8858_modes, OV8858_NUM_MODES,
> > +				      width, height, format->width,
> > +				      format->height);
> > +
> > +	reg_list = ov8858->num_lanes == 4
> > +		 ? mode->reg_modes.mode_4lanes
> > +		 : mode->reg_modes.mode_2lanes;
> > +
> > +	ret = ov8858_write_array(ov8858->client, reg_list);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* 200 usec max to let PLL stabilize. */
> > +	fsleep(200);
> > +
> > +	ret = __v4l2_ctrl_handler_setup(&ov8858->ctrl_handler);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = ov8858_write(ov8858->client, OV8858_REG_SC_CTRL0100,
> > +			   OV8858_MODE_STREAMING, NULL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* t5 (fixed) = 10msec before entering streaming state */
> > +	fsleep(10000);
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_stop_stream(struct ov8858 *ov8858)
> > +{
> > +	return ov8858_write(ov8858->client, OV8858_REG_SC_CTRL0100,
> > +			    OV8858_MODE_SW_STANDBY, NULL);
> > +}
> > +
> > +static int ov8858_s_stream(struct v4l2_subdev *sd, int on)
> > +{
> > +	struct ov8858 *ov8858 = sd_to_ov8858(sd);
> > +	struct i2c_client *client = ov8858->client;
> > +	struct v4l2_subdev_state *state;
> > +	int ret = 0;
> > +
> > +	state = v4l2_subdev_lock_and_get_active_state(sd);
> > +
> > +	if (on) {
> > +		ret = pm_runtime_resume_and_get(&client->dev);
> > +		if (ret < 0)
> > +			goto unlock_and_return;
> > +
> > +		ret = ov8858_start_stream(ov8858, state);
> > +		if (ret) {
> > +			dev_err(&client->dev, "Failed to start streaming\n");
> > +			pm_runtime_put_sync(&client->dev);
> > +			goto unlock_and_return;
> > +		}
> > +	} else {
> > +		ov8858_stop_stream(ov8858);
> > +		pm_runtime_mark_last_busy(&client->dev);
> > +		pm_runtime_put_autosuspend(&client->dev);
> > +	}
> > +
> > +unlock_and_return:
> > +	v4l2_subdev_unlock_state(state);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops ov8858_video_ops = {
> > +	.s_stream = ov8858_s_stream,
> > +};
> > +
> > +/* ----------------------------------------------------------------------------
> > + * Pad ops
> > + */
> > +
> > +static int ov8858_set_fmt(struct v4l2_subdev *sd,
> > +			  struct v4l2_subdev_state *state,
> > +			  struct v4l2_subdev_format *fmt)
> > +{
> > +	struct ov8858 *ov8858 = sd_to_ov8858(sd);
> > +	const struct ov8858_mode *mode;
> > +	s64 h_blank, vblank_def;
> > +
> > +	mode = v4l2_find_nearest_size(ov8858_modes, OV8858_NUM_MODES,
> > +				      width, height, fmt->format.width,
> > +				      fmt->format.height);
> > +
> > +	fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> > +	fmt->format.width = mode->width;
> > +	fmt->format.height = mode->height;
> > +	fmt->format.field = V4L2_FIELD_NONE;
> > +
> > +	/* Store the format in the current subdev state. */
> > +	*v4l2_subdev_get_pad_format(sd, state, 0) =  fmt->format;
> > +
> > +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> > +		return 0;
> > +
> > +	/* Adjust control limits when a new mode is applied. */
> > +	h_blank = mode->hts_def - mode->width;
> > +	__v4l2_ctrl_modify_range(ov8858->hblank, h_blank, h_blank, 1,
> > +				 h_blank);
> > +
> > +	vblank_def = mode->vts_def - mode->height;
> > +	__v4l2_ctrl_modify_range(ov8858->vblank, vblank_def,
> > +				 OV8858_VTS_MAX - mode->height, 1,
> > +				 vblank_def);
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_enum_frame_sizes(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_state *state,
> > +				   struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > +	if (fse->index >= OV8858_NUM_MODES)
> > +		return -EINVAL;
> > +
> > +	if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
> > +		return -EINVAL;
> > +
> > +	fse->min_width  = ov8858_modes[fse->index].width;
> > +	fse->max_width  = ov8858_modes[fse->index].width;
> > +	fse->max_height = ov8858_modes[fse->index].height;
> > +	fse->min_height = ov8858_modes[fse->index].height;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_enum_mbus_code(struct v4l2_subdev *sd,
> > +				 struct v4l2_subdev_state *state,
> > +				 struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	if (code->index != 0)
> > +		return -EINVAL;
> > +
> > +	code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_init_cfg(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_state *sd_state)
> > +{
> > +	const struct ov8858_mode *def_mode = &ov8858_modes[0];
> > +	struct v4l2_subdev_format fmt = {
> > +		.which = V4L2_SUBDEV_FORMAT_TRY,
> > +		.format = {
> > +			.width = def_mode->width,
> > +			.height = def_mode->height,
> > +		},
> > +	};
> > +
> > +	ov8858_set_fmt(sd, sd_state, &fmt);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_pad_ops ov8858_pad_ops = {
> > +	.init_cfg = ov8858_init_cfg,
> > +	.enum_mbus_code = ov8858_enum_mbus_code,
> > +	.enum_frame_size = ov8858_enum_frame_sizes,
> > +	.get_fmt = v4l2_subdev_get_fmt,
> > +	.set_fmt = ov8858_set_fmt,
> > +};
> > +
> > +static const struct v4l2_subdev_ops ov8858_subdev_ops = {
> > +	.video	= &ov8858_video_ops,
> > +	.pad	= &ov8858_pad_ops,
> > +};
> > +
> > +/* ----------------------------------------------------------------------------
> > + * Controls handling
> > + */
> > +
> > +static int ov8858_enable_test_pattern(struct ov8858 *ov8858, u32 pattern)
> > +{
> > +	u32 val;
> > +
> > +	if (pattern)
> > +		val = (pattern - 1) | OV8858_TEST_PATTERN_ENABLE;
> > +	else
> > +		val = OV8858_TEST_PATTERN_DISABLE;
> > +
> > +	return ov8858_write(ov8858->client, OV8858_REG_TEST_PATTERN, val, NULL);
> > +}
> > +
> > +static int ov8858_set_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +	struct ov8858 *ov8858 = container_of(ctrl->handler,
> > +					     struct ov8858, ctrl_handler);
> > +	struct i2c_client *client = ov8858->client;
> > +	struct v4l2_mbus_framefmt *format;
> > +	struct v4l2_subdev_state *state;
> > +	u16 digi_gain;
> > +	s64 max_exp;
> > +	int ret;
> > +
> > +	/*
> > +	 * The control handler and the subdev state use the same mutex and the
> > +	 * mutex is guaranteed to be locked:
> > +	 * - by the core when s_ctrl is called int the VIDIOC_S_CTRL call path
> > +	 * - by the driver when s_ctrl is called in the s_stream(1) call path
> > +	 */
> > +	state = v4l2_subdev_get_locked_active_state(&ov8858->subdev);
> > +	format = v4l2_subdev_get_pad_format(&ov8858->subdev, state, 0);
> > +
> > +	/* Propagate change of current control to all related controls */
> > +	switch (ctrl->id) {
> > +	case V4L2_CID_VBLANK:
> > +		/* Update max exposure while meeting expected vblanking */
> > +		max_exp = format->height + ctrl->val - OV8858_EXPOSURE_MARGIN;
> > +		__v4l2_ctrl_modify_range(ov8858->exposure,
> > +					 ov8858->exposure->minimum, max_exp,
> > +					 ov8858->exposure->step,
> > +					 ov8858->exposure->default_value);
> > +		break;
> > +	}
> > +
> > +	if (!pm_runtime_get_if_in_use(&client->dev))
> > +		return 0;
> > +
> > +	switch (ctrl->id) {
> > +	case V4L2_CID_EXPOSURE:
> > +		/* 4 least significant bits of exposure are fractional part */
> > +		ret = ov8858_write(ov8858->client, OV8858_REG_LONG_EXPO,
> > +				   ctrl->val << 4, NULL);
> > +		break;
> > +	case V4L2_CID_ANALOGUE_GAIN:
> > +		ret = ov8858_write(ov8858->client, OV8858_REG_LONG_GAIN,
> > +				   ctrl->val, NULL);
> > +		break;
> > +	case V4L2_CID_DIGITAL_GAIN:
> > +		/*
> > +		 * Digital gain is assembled as:
> > +		 * 0x350a[7:0] = dgain[13:6]
> > +		 * 0x350b[5:0] = dgain[5:0]
>
> Weird one :-S Nothing we can do about it.
>

FTR I tried setting analogue gain with the sam bit-layout. Doesn't
work well

> > +		 * Reassemble the control value to write it in one go.
> > +		 */
> > +		digi_gain = (ctrl->val & OV8858_LONG_DIGIGAIN_L_MASK)
> > +			  | ((ctrl->val & OV8858_LONG_DIGIGAIN_H_MASK) <<
> > +			      OV8858_LONG_DIGIGAIN_H_SHIFT);
> > +		ret = ov8858_write(ov8858->client, OV8858_REG_LONG_DIGIGAIN,
> > +				   digi_gain, NULL);
> > +		break;
> > +	case V4L2_CID_VBLANK:
> > +		ret = ov8858_write(ov8858->client, OV8858_REG_VTS,
> > +				   ctrl->val + format->height, NULL);
> > +		break;
> > +	case V4L2_CID_TEST_PATTERN:
> > +		ret = ov8858_enable_test_pattern(ov8858, ctrl->val);
> > +		break;
> > +	default:
> > +		ret = -EINVAL;
> > +		dev_warn(&client->dev, "%s Unhandled id: 0x%x\n",
> > +			 __func__, ctrl->id);
> > +		break;
> > +	}
> > +
> > +	pm_runtime_put(&client->dev);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops ov8858_ctrl_ops = {
> > +	.s_ctrl = ov8858_set_ctrl,
> > +};
> > +
> > +/* ----------------------------------------------------------------------------
> > + * Power Management
> > + */
> > +
> > +static int ov8858_power_on(struct ov8858 *ov8858)
> > +{
> > +	struct device *dev = &ov8858->client->dev;
> > +	unsigned long delay_us;
> > +	int ret;
> > +
> > +	ret = clk_set_rate(ov8858->xvclk, OV8858_XVCLK_FREQ);
> > +	if (ret < 0)
> > +		dev_warn(dev, "Failed to set xvclk rate (24MHz)\n");
> > +	if (clk_get_rate(ov8858->xvclk) != OV8858_XVCLK_FREQ)
> > +		dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
> > +
> > +	ret = clk_prepare_enable(ov8858->xvclk);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to enable xvclk\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = regulator_bulk_enable(OV8858_NUM_SUPPLIES, ov8858->supplies);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to enable regulators\n");
> > +		goto disable_clk;
> > +	}
> > +
> > +	/*
> > +	 * The chip manual only suggests 8192 cycles prior to first SCCB
> > +	 * transaction, but a double sleep between the release of gpios
> > +	 * helps with sporadic failures observed at probe time.
> > +	 */
> > +	delay_us = DIV_ROUND_UP(8192, OV8858_XVCLK_FREQ / 1000 / 1000);
> > +
> > +	gpiod_set_value_cansleep(ov8858->reset_gpio, 0);
> > +	fsleep(delay_us);
> > +	gpiod_set_value_cansleep(ov8858->pwdn_gpio, 0);
> > +	fsleep(delay_us);
> > +
> > +	return 0;
> > +
> > +disable_clk:
> > +	clk_disable_unprepare(ov8858->xvclk);
> > +
> > +	return ret;
> > +}
> > +
> > +static void ov8858_power_off(struct ov8858 *ov8858)
> > +{
> > +	gpiod_set_value_cansleep(ov8858->pwdn_gpio, 1);
> > +	clk_disable_unprepare(ov8858->xvclk);
> > +	gpiod_set_value_cansleep(ov8858->reset_gpio, 1);
> > +
> > +	regulator_bulk_disable(OV8858_NUM_SUPPLIES, ov8858->supplies);
> > +}
> > +
> > +static int ov8858_runtime_resume(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov8858 *ov8858 = sd_to_ov8858(sd);
> > +
> > +	return ov8858_power_on(ov8858);
> > +}
> > +
> > +static int ov8858_runtime_suspend(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov8858 *ov8858 = sd_to_ov8858(sd);
> > +
> > +	ov8858_power_off(ov8858);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops ov8858_pm_ops = {
> > +	SET_RUNTIME_PM_OPS(ov8858_runtime_suspend,
> > +			   ov8858_runtime_resume, NULL)
> > +};
> > +
> > +/* ----------------------------------------------------------------------------
> > + * Probe and initialization
> > + */
> > +
> > +static int ov8858_init_ctrls(struct ov8858 *ov8858)
>
> I'd put this function just after ov8858_ctrl_ops to group it with the
> rest of the control code. Up to you.
>

I was debated, but this is still "probing" to me..

> > +{
> > +	struct v4l2_ctrl_handler *handler = &ov8858->ctrl_handler;
> > +	const struct ov8858_mode *mode = &ov8858_modes[0];
> > +	struct v4l2_fwnode_device_properties props;
> > +	s64 exposure_max, vblank_def;
> > +	struct v4l2_ctrl *ctrl;
> > +	u32 h_blank;
> > +	int ret;
> > +
> > +	ret = v4l2_ctrl_handler_init(handler, 10);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ,
> > +				      0, 0, link_freq_menu_items);
> > +	if (ctrl)
> > +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE,
> > +			  0, ov8858->pixel_rate, 1, ov8858->pixel_rate);
> > +
> > +	h_blank = mode->hts_def - mode->width;
> > +	ov8858->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> > +					   h_blank, h_blank, 1, h_blank);
> > +	if (ov8858->hblank)
> > +		ov8858->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	vblank_def = mode->vts_def - mode->height;
> > +	ov8858->vblank = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops,
> > +					   V4L2_CID_VBLANK, vblank_def,
> > +					   OV8858_VTS_MAX - mode->height,
> > +					   1, vblank_def);
> > +
> > +	exposure_max = mode->vts_def - OV8858_EXPOSURE_MARGIN;
> > +	ov8858->exposure = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops,
> > +					     V4L2_CID_EXPOSURE,
> > +					     OV8858_EXPOSURE_MIN,
> > +					     exposure_max, OV8858_EXPOSURE_STEP,
> > +					     mode->exp_def);
> > +
> > +	v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
> > +			  OV8858_LONG_GAIN_MIN, OV8858_LONG_GAIN_MAX,
> > +			  OV8858_LONG_GAIN_STEP, OV8858_LONG_GAIN_DEFAULT);
> > +
> > +	v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> > +			  OV8858_LONG_DIGIGAIN_MIN, OV8858_LONG_DIGIGAIN_MAX,
> > +			  OV8858_LONG_DIGIGAIN_STEP,
> > +			  OV8858_LONG_DIGIGAIN_DEFAULT);
> > +
> > +	v4l2_ctrl_new_std_menu_items(handler, &ov8858_ctrl_ops,
> > +				     V4L2_CID_TEST_PATTERN,
> > +				     ARRAY_SIZE(ov8858_test_pattern_menu) - 1,
> > +				     0, 0, ov8858_test_pattern_menu);
> > +
> > +	if (handler->error) {
> > +		ret = handler->error;
> > +		goto err_free_handler;
> > +	}
> > +
> > +	ret = v4l2_fwnode_device_parse(&ov8858->client->dev, &props);
> > +	if (ret)
> > +		goto err_free_handler;
> > +
> > +	ret = v4l2_ctrl_new_fwnode_properties(handler, &ov8858_ctrl_ops,
> > +					      &props);
> > +	if (ret)
> > +		goto err_free_handler;
> > +
> > +	ov8858->subdev.ctrl_handler = handler;
> > +
> > +	return 0;
> > +
> > +err_free_handler:
> > +	dev_err(&ov8858->client->dev, "Failed to init controls: %d\n", ret);
> > +	v4l2_ctrl_handler_free(handler);
> > +
> > +	return ret;
> > +}
> > +
> > +static int ov8858_check_sensor_id(struct ov8858 *ov8858,
> > +				  struct i2c_client *client)
> > +{
> > +	struct device *dev = &ov8858->client->dev;
> > +	u32 id = 0;
> > +	int ret;
> > +
> > +	ret = ov8858_read_reg(client, OV8858_REG_CHIP_ID, &id);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (id != OV8858_CHIP_ID) {
> > +		dev_err(dev, "Unexpected sensor id 0x%x\n", id);
>
> I'd use "0x%06x" here (or "#06x"), as I find it more confusing when
> messages print a different hex value length depending on the value.
>

I got all messagges printed correctly (without leading 0s I mean). I
recall I used to prepend the by variable lenght, but recently I'm not
doing it anymore as the result doesn't change ?

> > +		return -ENODEV;
> > +	}
> > +
> > +	ret = ov8858_read_reg(client, OV8858_REG_SUB_ID, &id);
> > +	if (ret)
> > +		return ret;
> > +
> > +	dev_info(dev, "Detected OV8858 sensor, revision 0x%x\n", id);
>
> Same here, 0x%02x
>
> > +
> > +	if (id == OV8858_R2A) {
> > +		ov8858->global_regs = ov8858->num_lanes == 4
> > +				    ? ov8858_global_regs_r2a_4lane
> > +				    : ov8858_global_regs_r2a_2lane;
> > +	} else {
> > +		ov8858->global_regs = ov8858_global_regs_r1a;
> > +		dev_warn(dev, "R1A may not work well!\n");
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_configure_regulators(struct ov8858 *ov8858)
> > +{
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < OV8858_NUM_SUPPLIES; i++)
> > +		ov8858->supplies[i].supply = ov8858_supply_names[i];
> > +
> > +	return devm_regulator_bulk_get(&ov8858->client->dev,
> > +				       OV8858_NUM_SUPPLIES,
> > +				       ov8858->supplies);
> > +}
> > +
> > +static int ov8858_parse_of(struct ov8858 *ov8858)
> > +{
> > +	struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
> > +	struct device *dev = &ov8858->client->dev;
> > +	struct fwnode_handle *endpoint;
> > +	int ret;
> > +
> > +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> > +	if (!endpoint) {
> > +		dev_err(dev, "Failed to get endpoint\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = v4l2_fwnode_endpoint_parse(endpoint, &vep);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to parse endpoint: %d\n", ret);
> > +		fwnode_handle_put(endpoint);
> > +		return ret;
> > +	}
> > +
> > +	ov8858->num_lanes = vep.bus.mipi_csi2.num_data_lanes;
> > +	switch (ov8858->num_lanes) {
> > +	case 4:
> > +	case 2:
> > +		break;
> > +	default:
> > +		dev_err(dev, "Unsupported number of data lanes %u\n",
> > +			ov8858->num_lanes);
> > +		fwnode_handle_put(endpoint);
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* pixel rate = link frequency * 2 * lanes / bpp */
> > +	ov8858->pixel_rate = OV8858_LINK_FREQ * 2 * ov8858->num_lanes / 10;
> > +
> > +	ov8858->subdev.fwnode = endpoint;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ov8858_probe(struct i2c_client *client)
> > +{
> > +	struct device *dev = &client->dev;
> > +	struct v4l2_subdev *sd;
> > +	struct ov8858 *ov8858;
> > +	int ret;
> > +
> > +	ov8858 = devm_kzalloc(dev, sizeof(*ov8858), GFP_KERNEL);
> > +	if (!ov8858)
> > +		return -ENOMEM;
> > +
> > +	ov8858->client = client;
> > +
> > +	ov8858->xvclk = devm_clk_get(dev, "xvclk");
> > +	if (IS_ERR(ov8858->xvclk))
> > +		return dev_err_probe(dev, PTR_ERR(ov8858->xvclk),
> > +				     "Failed to get xvclk\n");
> > +
> > +	ov8858->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > +						     GPIOD_OUT_HIGH);
> > +	if (IS_ERR(ov8858->reset_gpio))
> > +		return dev_err_probe(dev, PTR_ERR(ov8858->reset_gpio),
> > +				     "Failed to get reset gpio\n");
> > +
> > +	ov8858->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown",
> > +						    GPIOD_OUT_HIGH);
> > +	if (IS_ERR(ov8858->pwdn_gpio))
> > +		return dev_err_probe(dev, PTR_ERR(ov8858->pwdn_gpio),
> > +				     "Failed to get powerdown gpio\n");
> > +
> > +	ret = ov8858_configure_regulators(ov8858);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> > +
> > +	sd = &ov8858->subdev;
> > +	v4l2_i2c_subdev_init(sd, client, &ov8858_subdev_ops);
> > +
> > +	ret = ov8858_parse_of(ov8858);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = ov8858_init_ctrls(ov8858);
> > +	if (ret)
> > +		goto err_put_fwnode;
> > +
> > +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	ov8858->pad.flags = MEDIA_PAD_FL_SOURCE;
> > +	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +	ret = media_entity_pads_init(&sd->entity, 1, &ov8858->pad);
> > +	if (ret < 0)
> > +		goto err_free_handler;
> > +
> > +	sd->state_lock = ov8858->ctrl_handler.lock;
> > +	ret = v4l2_subdev_init_finalize(sd);
> > +	if (ret < 0) {
> > +		dev_err(&client->dev, "Subdev initialization error %d\n", ret);
> > +		goto err_clean_entity;
> > +	}
> > +
> > +	ret = ov8858_power_on(ov8858);
> > +	if (ret)
> > +		goto err_clean_entity;
> > +
> > +	pm_runtime_set_active(dev);
> > +	pm_runtime_get_noresume(dev);
> > +	pm_runtime_enable(dev);
> > +
> > +	ret = ov8858_check_sensor_id(ov8858, client);
> > +	if (ret)
> > +		goto err_power_off;
> > +
> > +	pm_runtime_set_autosuspend_delay(dev, 1000);
> > +	pm_runtime_use_autosuspend(dev);
>
> I think you need a pm_runtime_mark_last_busy() here.
>

mark_last_busy() restarts the counter for autosuspend. Do we really
need it now ? I would have suspended immediately at the end of probe.

The vastity of the pm_runtime() API is frankly embarassing. I just
recently learned about mark_last_busy() and it feel rather dumb a
driver has to mark the 'last time it was busy' by itself before
calling autosuspend. Ofc I might be missing the larger picture here,
but it feels the perfect example of an API that each driver will get
slightly different and wrong in its own way.


> > +	pm_runtime_put_autosuspend(dev);
>
> And this (and the pm_runtime_mark_last_busy() call) should move to after
> v4l2_async_register_subdev_sensor(), or the pm_runtime_put_noidle() call
> in err_power_off in case v4l2_async_register_subdev_sensor() fails will
> release a reference that you don't own anymore.
>

Or should I remove the pm_runtime_put_noidle() call from the error
path ? Probably is better to just move the autosuspend call after the
subdev registration.


> > +
> > +	ret = v4l2_async_register_subdev_sensor(sd);
> > +	if (ret) {
> > +		dev_err(dev, "v4l2 async register subdev failed\n");
> > +		goto err_power_off;
> > +	}
> > +
> > +	return 0;
> > +
> > +err_power_off:
> > +	pm_runtime_disable(dev);
> > +	pm_runtime_put_noidle(dev);
> > +	ov8858_power_off(ov8858);
> > +err_clean_entity:
> > +	media_entity_cleanup(&sd->entity);
> > +err_free_handler:
> > +	v4l2_ctrl_handler_free(&ov8858->ctrl_handler);
> > +err_put_fwnode:
> > +	fwnode_handle_put(ov8858->subdev.fwnode);
> > +
> > +	return ret;
> > +}
> > +
> > +static void ov8858_remove(struct i2c_client *client)
> > +{
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct ov8858 *ov8858 = sd_to_ov8858(sd);
> > +
> > +	v4l2_async_unregister_subdev(sd);
> > +	media_entity_cleanup(&sd->entity);
> > +	v4l2_ctrl_handler_free(&ov8858->ctrl_handler);
> > +	fwnode_handle_put(ov8858->subdev.fwnode);
> > +
> > +	pm_runtime_disable(&client->dev);
> > +	if (!pm_runtime_status_suspended(&client->dev))
> > +		ov8858_power_off(ov8858);
> > +	pm_runtime_set_suspended(&client->dev);
> > +}
> > +
> > +static const struct of_device_id ov8858_of_match[] = {
> > +	{ .compatible = "ovti,ov8858" },
> > +	{ /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, ov8858_of_match);
> > +
> > +static struct i2c_driver ov8858_i2c_driver = {
> > +	.driver = {
> > +		.name = "ov8858",
> > +		.pm = &ov8858_pm_ops,
> > +		.of_match_table = of_match_ptr(ov8858_of_match),
>
> Drop of_match_ptr(), it's not needed as the device_driver structure
> of_match_table field isn't conditioned by CONFIG_OF anymore.
>
> It's all small issues, with these addressed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Thanks, I'll send a new version soon!

>
> > +	},
> > +	.probe_new	= &ov8858_probe,
> > +	.remove		= &ov8858_remove,
> > +};
> > +
> > +module_i2c_driver(ov8858_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("OmniVision OV8858 sensor driver");
> > +MODULE_LICENSE("GPL");
>
> --
> Regards,
>
> Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux