Re: [PATCH v5] media: uvcvideo: Fix race condition with usb_kill_urb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ricardo,

Thank you for the patch.

On Mon, Jan 02, 2023 at 01:53:38PM +0100, Ricardo Ribalda wrote:
> usb_kill_urb warranties that all the handlers are finished when it
> returns, but does not protect against threads that might be handling
> asynchronously the urb.
> 
> For UVC, the function uvc_ctrl_status_event_async() takes care of
> control changes asynchronously.
> 
>  If the code is executed in the following order:
> 
> CPU 0					CPU 1
> ===== 					=====
> uvc_status_complete()
> 					uvc_status_stop()
> uvc_ctrl_status_event_work()
> 					uvc_status_start() -> FAIL
> 
> Then uvc_status_start will keep failing and this error will be shown:
> 
> <4>[    5.540139] URB 0000000000000000 submitted while active
> drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
> 
> Let's improve the current situation, by not re-submiting the urb if
> we are stopping the status event. Also process the queued work
> (if any) during stop.
> 
> CPU 0					CPU 1
> ===== 					=====
> uvc_status_complete()
> 					uvc_status_stop()
> 					uvc_status_start()
> uvc_ctrl_status_event_work() -> FAIL
> 
> Hopefully, with the usb layer protection this should be enough to cover
> all the cases.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
> Reviewed-by: Yunke Cao <yunkec@xxxxxxxxxxxx>
> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> ---
> uvc: Fix race condition on uvc
> 
> Make sure that all the async work is finished when we stop the status urb.
> 
> To: Yunke Cao <yunkec@xxxxxxxxxxxx>
> To: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
> To: Max Staudt <mstaudt@xxxxxxxxxx>
> To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
> Changes in v5:
> - atomic_t do not impose barriers, use smp_mb() instead. (Thanks Laurent)
> - Add an extra cancel_work_sync().
> - Link to v4: https://lore.kernel.org/r/20221212-uvc-race-v4-0-38d7075b03f5@xxxxxxxxxxxx
> 
> Changes in v4:
> - Replace bool with atomic_t to avoid compiler reordering.
> - First complete the async work and then kill the urb to avoid race (Thanks Laurent!)
> - Link to v3: https://lore.kernel.org/r/20221212-uvc-race-v3-0-954efc752c9a@xxxxxxxxxxxx
> 
> Changes in v3:
> - Remove the patch for dev->status, makes more sense in another series, and makes
>   the zero day less nervous.
> - Update reviewed-by (thanks Yunke!).
> - Link to v2: https://lore.kernel.org/r/20221212-uvc-race-v2-0-54496cc3b8ab@xxxxxxxxxxxx
> 
> Changes in v2:
> - Add a patch for not kalloc dev->status
> - Redo the logic mechanism, so it also works with suspend (Thanks Yunke!)
> - Link to v1: https://lore.kernel.org/r/20221212-uvc-race-v1-0-c52e1783c31d@xxxxxxxxxxxx
> ---
>  drivers/media/usb/uvc/uvc_ctrl.c   |  3 +++
>  drivers/media/usb/uvc/uvc_status.c | 36 ++++++++++++++++++++++++++++++++++++
>  drivers/media/usb/uvc/uvcvideo.h   |  1 +
>  3 files changed, 40 insertions(+)
> 
> diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
> index c95a2229f4fa..5160facc8e20 100644
> --- a/drivers/media/usb/uvc/uvc_ctrl.c
> +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> @@ -1442,6 +1442,9 @@ static void uvc_ctrl_status_event_work(struct work_struct *work)
>  
>  	uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
>  
> +	if (dev->flush_status)
> +		return;
> +
>  	/* Resubmit the URB. */
>  	w->urb->interval = dev->int_ep->desc.bInterval;
>  	ret = usb_submit_urb(w->urb, GFP_KERNEL);
> diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> index 7518ffce22ed..5911e63776e1 100644
> --- a/drivers/media/usb/uvc/uvc_status.c
> +++ b/drivers/media/usb/uvc/uvc_status.c
> @@ -6,6 +6,7 @@
>   *          Laurent Pinchart (laurent.pinchart@xxxxxxxxxxxxxxxx)
>   */
>  
> +#include <asm/barrier.h>
>  #include <linux/kernel.h>
>  #include <linux/input.h>
>  #include <linux/slab.h>
> @@ -309,5 +310,40 @@ int uvc_status_start(struct uvc_device *dev, gfp_t flags)
>  
>  void uvc_status_stop(struct uvc_device *dev)
>  {
> +	struct uvc_ctrl_work *w = &dev->async_ctrl;
> +
> +	/* From this point, the status urb is not re-queued */
> +	dev->flush_status = 1;

flush_status is now a bool, set it to true instead of 1. Same below for
false instead of 0.

> +	/*
> +	 * Make sure that the other CPUs are aware of the new value of
> +	 * flush_status.
> +	 */
> +	smp_mb();

	/*
	 * Prevent to asynchronous control handler from requeing the URB. The
	 * barrier is needed the flush_status change is visible to other CPUs
	 * running the asynchronous handler before usb_kill_urb() is called
	 * below.
	 */
	dev->flush_status = true;
	smp_mb();

> +
> +	/* If there is any status event on the queue, process it. */
> +	if (cancel_work_sync(&w->work))
> +		uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
> +
> +	/* Kill the urb. */
>  	usb_kill_urb(dev->int_urb);
> +
> +	/*
> +	 * If an status event was queued between cancel_work_sync() and
> +	 * usb_kill_urb(), process it.
> +	 */

	/*
	 * The URB completion handler may have queued asynchronous work. This
	 * won't resubmit the URB as flush_status is set, but it needs to be
	 * cancelled before returning or it could then race with a future
	 * uvc_status_start() call.
	 */

> +	if (cancel_work_sync(&w->work))
> +		uvc_ctrl_status_event(w->chain, w->ctrl, w->data);

I think I'd still prefer checking flush_status in
uvc_ctrl_status_event_async() and drop the event, as it would be simpler
here. uvc_status_stop() is called when the last user indicates it's not
interested in events anymore (by closing the device at the moment,
possibly by unsubscribing from events in the future), so dropping the
event isn't a problem as far as I can tell. What do you think ?

> +
> +	/*
> +	 * From this point, there are no events on the queue and the status urb

s/urb/URB/

> +	 * is dead, this is, no events will be queued until uvc_status_start()
> +	 * is called.
> +	 */
> +	dev->flush_status = 0;
> +	/*
> +	 * Write to memory the value of flush_status before uvc_status_start()
> +	 * is called again,

s/,/./

> +	 */
> +	smp_mb();

	/*
	 * From this point, the status URB is dead, and no asynchronous work is
	 * queued. No event will be processed until uvc_status_start() is
	 * called. Reset flush_status and make it visible to the asynchronous
	 * handler before uvc_status_start() requeues the status URB.
	 */
	dev->flush_status = 0;
	smp_mb();

The barrier here is most likely overkill given that I'd be very
surprised if a URB could be queued, followed by a work item being
queued, without any memory barrier, but it's good to be explicit I
suppose :-)

> +

Drop the blank line.

>  }
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index df93db259312..6a9b72d6789e 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -560,6 +560,7 @@ struct uvc_device {
>  	struct usb_host_endpoint *int_ep;
>  	struct urb *int_urb;
>  	u8 *status;
> +	bool flush_status;
>  	struct input_dev *input;
>  	char input_phys[64];
>  
> 
> ---
> base-commit: 0ec5a38bf8499f403f81cb81a0e3a60887d1993c
> change-id: 20221212-uvc-race-09276ea68bf8

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux