Re: [PATCH v4] media: uvcvideo: Fix race condition with usb_kill_urb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2 Jan 2023 at 13:57, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Ricardo,
>
> On Mon, Jan 02, 2023 at 01:45:06PM +0100, Ricardo Ribalda wrote:
> > On Tue, 27 Dec 2022 at 15:37, Laurent Pinchart wrote:
> > > On Tue, Dec 27, 2022 at 04:25:01PM +0200, Laurent Pinchart wrote:
> > > > On Wed, Dec 14, 2022 at 05:31:55PM +0100, Ricardo Ribalda wrote:
> > > > > usb_kill_urb warranties that all the handlers are finished when it
> > > > > returns, but does not protect against threads that might be handling
> > > > > asynchronously the urb.
> > > > >
> > > > > For UVC, the function uvc_ctrl_status_event_async() takes care of
> > > > > control changes asynchronously.
> > > > >
> > > > >  If the code is executed in the following order:
> > > > >
> > > > > CPU 0                                       CPU 1
> > > > > =====                                       =====
> > > > > uvc_status_complete()
> > > > >                                     uvc_status_stop()
> > > > > uvc_ctrl_status_event_work()
> > > > >                                     uvc_status_start() -> FAIL
> > > > >
> > > > > Then uvc_status_start will keep failing and this error will be shown:
> > > > >
> > > > > <4>[    5.540139] URB 0000000000000000 submitted while active
> > > > > drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
> > > > >
> > > > > Let's improve the current situation, by not re-submiting the urb if
> > > > > we are stopping the status event. Also process the queued work
> > > > > (if any) during stop.
> > > > >
> > > > > CPU 0                                       CPU 1
> > > > > =====                                       =====
> > > > > uvc_status_complete()
> > > > >                                     uvc_status_stop()
> > > > >                                     uvc_status_start()
> > > > > uvc_ctrl_status_event_work() -> FAIL
> > > > >
> > > > > Hopefully, with the usb layer protection this should be enough to cover
> > > > > all the cases.
> > > > >
> > > > > Cc: stable@xxxxxxxxxxxxxxx
> > > > > Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
> > > > > Reviewed-by: Yunke Cao <yunkec@xxxxxxxxxxxx>
> > > > > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > > > > ---
> > > > > uvc: Fix race condition on uvc
> > > > >
> > > > > Make sure that all the async work is finished when we stop the status urb.
> > > > >
> > > > > To: Yunke Cao <yunkec@xxxxxxxxxxxx>
> > > > > To: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
> > > > > To: Max Staudt <mstaudt@xxxxxxxxxx>
> > > > > To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > > > To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> > > > > Cc: linux-media@xxxxxxxxxxxxxxx
> > > > > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > > > > ---
> > > > > Changes in v4:
> > > > > - Replace bool with atomic_t to avoid compiler reordering
> > > > > - First complete the async work and then kill the urb to avoid race (Thanks Laurent!)
> > > > > - Link to v3: https://lore.kernel.org/r/20221212-uvc-race-v3-0-954efc752c9a@xxxxxxxxxxxx
> > > > >
> > > > > Changes in v3:
> > > > > - Remove the patch for dev->status, makes more sense in another series, and makes
> > > > >   the zero day less nervous.
> > > > > - Update reviewed-by (thanks Yunke!).
> > > > > - Link to v2: https://lore.kernel.org/r/20221212-uvc-race-v2-0-54496cc3b8ab@xxxxxxxxxxxx
> > > > >
> > > > > Changes in v2:
> > > > > - Add a patch for not kalloc dev->status
> > > > > - Redo the logic mechanism, so it also works with suspend (Thanks Yunke!)
> > > > > - Link to v1: https://lore.kernel.org/r/20221212-uvc-race-v1-0-c52e1783c31d@xxxxxxxxxxxx
> > > > > ---
> > > > >  drivers/media/usb/uvc/uvc_ctrl.c   | 3 +++
> > > > >  drivers/media/usb/uvc/uvc_status.c | 6 ++++++
> > > > >  drivers/media/usb/uvc/uvcvideo.h   | 1 +
> > > > >  3 files changed, 10 insertions(+)
> > > > >
> > > > > diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
> > > > > index c95a2229f4fa..1be6897a7d6d 100644
> > > > > --- a/drivers/media/usb/uvc/uvc_ctrl.c
> > > > > +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> > > > > @@ -1442,6 +1442,9 @@ static void uvc_ctrl_status_event_work(struct work_struct *work)
> > > > >
> > > > >     uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
> > > > >
> > > > > +   if (atomic_read(&dev->flush_status))
> > > > > +           return;
> > > > > +
> > > > >     /* Resubmit the URB. */
> > > > >     w->urb->interval = dev->int_ep->desc.bInterval;
> > > > >     ret = usb_submit_urb(w->urb, GFP_KERNEL);
> > > > > diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> > > > > index 7518ffce22ed..4a95850cdc1b 100644
> > > > > --- a/drivers/media/usb/uvc/uvc_status.c
> > > > > +++ b/drivers/media/usb/uvc/uvc_status.c
> > > > > @@ -304,10 +304,16 @@ int uvc_status_start(struct uvc_device *dev, gfp_t flags)
> > > > >     if (dev->int_urb == NULL)
> > > > >             return 0;
> > > > >
> > > > > +   atomic_set(&dev->flush_status, 0);
> > > > >     return usb_submit_urb(dev->int_urb, flags);
> > > > >  }
> > > > >
> > > > >  void uvc_status_stop(struct uvc_device *dev)
> > > > >  {
> > > > > +   struct uvc_ctrl_work *w = &dev->async_ctrl;
> > > > > +
> > > > > +   atomic_set(&dev->flush_status, 1);
> > > >
> > > > Note that atomic_read() and atomic_set() do no imply any memory barrier
> > > > on most architectures, as far as I can tell. They essentially become
> > > > READ_ONCE() and WRITE_ONCE() calls, which guarantee that the compiler
> > > > will not merge or split loads or stores, or reorder them with respect to
> > > > load and stores to the *same* memory location, but nothing else. I think
> > > > you need to add proper barriers, and you can then probably also drop
> > > > usage of atomic_t.
> >
> > You are absolutely right! Only a subset of atomic implies memory barriers.
> >
> > Found this doc particularly good:
> > https://www.kernel.org/doc/html/v5.10/core-api/atomic_ops.html
> >
> >
> > > >
> > > > > +   if (cancel_work_sync(&w->work))
> > > > > +           uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
> > > > >     usb_kill_urb(dev->int_urb);
> > > >
> > > > This should get rid of the main race (possibly save the barrier issue),
> > > > but it's not the most efficient option, and can still be problematic.
> > > > Consider the following case:
> > > >
> > > > CPU0                                                  CPU1
> > > > ----                                                  ----
> > > >
> > > > void uvc_status_stop(struct uvc_device *dev)          uvc_ctrl_status_event_async()
> > > > {                                                     {
> > > >       ...
> > > >       atomic_set(&dev->flush_status, 1);                      ...
> > > >       if (cancel_work_sync())
> > > >               ...
> > > >                                                               schedule_work();
> > > >       usb_kill_urb();                                 }
> > > > }
> > > >
> > > > The usb_kill_urb() call ensures that uvc_ctrl_status_event_async()
> > > > completes before uvc_status_stop() returns, but there will still be work
> > > > scheduled in that case. uvc_ctrl_status_event_work() will be run later,
> > > > and as flush_status is set to 1, the function will not resubmit the URB.
> > > > That fixes the main race, but leaves the asynchronous control status
> > > > event handling for after uvc_status_stop() returns, which isn't great.
> > > >
> > > > Now, if we consider that uvc_status_start() could be called shortly
> > > > after uvc_status_stop(), we may get in a situation where
> > > > uvc_status_start() will reset flush_status to 0 before
> > > > uvc_ctrl_status_event_async() runs. Both uvc_ctrl_status_event_async()
> > > > and uvc_status_start() will thus submit the same URB.
> > > >
> > > > You can't fix this by first killing the URB and then cancelling the
> > > > work, as there would then be a risk that uvc_ctrl_status_event_work()
> > > > would be running in parallel, going past the flush_status check before
> > > > flush_status gets set to 1 in uvc_status_stop(), and submitting the URB
> > > > after usb_kill_urb() is called.
> > > >
> > > > I think a good fix would be to check flush_status in
> > > > uvc_ctrl_status_event_async() and avoid the schedule_work() call in that
> > > > case.
> >
> > If we do that, then we will be losing an event. I would rather call
> > cancel_work_sync() again after usb_kill_urb().
>
> I've thought about that, but I don't think losing the event is an issue.
> We're stopping event handling in the first place, there's no
> synchronization guarantee with the camera. For all we know the camera
> could have generate the event right after we stop instead of right
> before. There's of course no reason to drop the event for the sake of
> it, but if it leads to simpler code, there's no reason to process it
> either.

Please take a look to v5, it does not look complicated, and we have
all the synchronization code in two functions:
uvc_status_stop() and uvc_ctrl_status_event_work(), instead of 3. Plus
we do not lose any received event.

Regards!

>
> > > > You could then also move the atomic_set(..., 0) call from
> > > > uvc_status_start() to the end of uvc_status_stop() (again with proper
> > > > barriers).
> >
> > Will do that, it is more "elegant".
> >
> > > Also, as all of this is tricky, comments in appropriate places in the
> > > code would be very helpful to avoid breaking things later.
> > >
> > > > Could you please check the memory barriers and test the above proposal
> > > > (after double-checking it of course, I may have missed something) ?
> > > >
> > > > >  }
> > > > > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> > > > > index df93db259312..1274691f157f 100644
> > > > > --- a/drivers/media/usb/uvc/uvcvideo.h
> > > > > +++ b/drivers/media/usb/uvc/uvcvideo.h
> > > > > @@ -560,6 +560,7 @@ struct uvc_device {
> > > > >     struct usb_host_endpoint *int_ep;
> > > > >     struct urb *int_urb;
> > > > >     u8 *status;
> > > > > +   atomic_t flush_status;
> > > > >     struct input_dev *input;
> > > > >     char input_phys[64];
> > > > >
>
> --
> Regards,
>
> Laurent Pinchart



-- 
Ricardo Ribalda



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux