From: Nishanth Menon <nm@xxxxxx> OV5640 Datasheet[1] Figures 2-3 and 2-4 indicate the timing sequences that is expected during various initialization steps. Note the power on time includes t0 + t1 + t2 >= 5ms, delay for poweron. As indicated in section 2.8, the PWDN assertion can either be via external pin control OR via the register 0x3008 bit 6 (see table 7-1 in [1]) [1] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver") Signed-off-by: Nishanth Menon <nm@xxxxxx> Signed-off-by: Jai Luthra <j-luthra@xxxxxx> --- drivers/media/i2c/ov5640.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 5df16fb6f0a0..bd7cc294cfe6 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -609,7 +609,7 @@ static const struct reg_value ov5640_init_setting[] = { {0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0}, {0x5025, 0x00, 0, 0}, {0x3a0f, 0x30, 0, 0}, {0x3a10, 0x28, 0, 0}, {0x3a1b, 0x30, 0, 0}, {0x3a1e, 0x26, 0, 0}, {0x3a11, 0x60, 0, 0}, - {0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300}, + {0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 5}, {0x3c00, 0x04, 0, 300}, }; static const struct reg_value ov5640_setting_low_res[] = { @@ -1810,9 +1810,17 @@ static int ov5640_set_autogain(struct ov5640_dev *sensor, bool on) static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on) { - return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ? - OV5640_REG_SYS_CTRL0_SW_PWUP : - OV5640_REG_SYS_CTRL0_SW_PWDN); + int ret; + + if (on) { + ret = ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, + OV5640_REG_SYS_CTRL0_SW_PWUP); + usleep_range(5000, 6000); + } else { + ret = ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, + OV5640_REG_SYS_CTRL0_SW_PWDN); + } + return ret; } static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on) -- 2.17.1
