From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
Currently imx334 sensor driver is configured for 1782Mbps/lane for
3840x2160@60 resolution with reqired reg mode values but if we run the
command "v4l2-ctl --all -d /dev/v4l-subdevX" it is showing incorrect link
frequeny, This is because of the incorrect value of IMX334_LINK_FREQ
witch is 891000000. it should be 1782000000.
In general with the value of 891000000 link frequency it is not possible
to configure 3840x2160@60 resolution.
Fixes: 9746b11715c3 ("media: i2c: Add imx334 camera sensor driver")
Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
---
drivers/media/i2c/imx334.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index 7b0a9086447d..acc9f9f15e47 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -49,7 +49,7 @@
#define IMX334_INCLK_RATE 24000000
/* CSI2 HW configuration */
-#define IMX334_LINK_FREQ 891000000
+#define IMX334_LINK_FREQ 1782000000
#define IMX334_NUM_DATA_LANES 4
#define IMX334_REG_MIN 0x00
--
2.34.1
