Hello Aishwarya,
On Wed, Dec 07, 2022 at 08:44:13PM +0200, Laurent Pinchart wrote:
> Hi Aishwarya,
>
> (CC'ing Jacopo and Sakari)
>
> On Wed, Dec 07, 2022 at 12:14:29PM +0100, Aishwarya Kothari wrote:
> > Hi,
> >
> > I was trying ov5640 camera sensor with the mainline BSP 6.0.0-rc3 kernel
> > and it fails to works, while it works quiet well on v5.18. When I
> > bisect, it points out to this commit 1f391df4 (media: v4l2-async: Use
> > endpoints in __v4l2_async_nf_add_fwnode_remote()) by Laurent Pinchart
> > and this is what it says in the logs :
> >
> > [ 4.291355] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0
> > [ 4.305228] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1
> > [ 4.317974] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2
> > [ 4.331039] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3
> > [ 4.344255] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4
> > [ 4.356940] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5
> > [ 4.369322] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6
> > [ 4.382119] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7
> > [ 4.395455] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints
> > [ 4.414971] stmpe-adc stmpe-adc: DMA mask not set
> >
> > So, now when I try to revert the change done by this commit, it still
> > fails. I assume there are a lot more changes following the commit that
> > could lead to this failure. Below are the logs.
> > Is there a way to get it to work without reverting any changes? Or Is
> > there something I'm missing or have to do any changes in the
> > corresponding files to get it to work?
>
> The commit you reference wasn't meant to break anything, so there's
> clearly something I've overlooked. Jacopo, have you noticed anything
> similar when working on the ov5640 driver ?
>
> > TDX Wayland with XWayland Upstream 6.1.0-devel-20221109+build.104
> > (kirkstone) apalis-imx6-10774951 ttymxc0
> > Apalis-iMX6_Reference-Multimedia-Image-upstream
> >
> > apalis-imx6-10774951 login: root
> > root@apalis-imx6-10774951:~# cat ov5640.sh
> > media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
> > media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
> > media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]"
> > # Configure pads
> > media-ctl -V "'ov5640 1-003c':0 [fmt:UYVY2X8/1920x1080 field:none]"
> > media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/1920x1080 field:none]"
> > media-ctl -V "'ipu1_csi1':2 [fmt:AYUV32/1920x1080 field:none]"
> > root@apalis-imx6-10774951:~# sh ov5640.sh
> > root@apalis-imx6-10774951:~# gst-launch-1.0 v4l2src device='/dev/video3'
> > ! videoconvert ! waylandsink
> > [ 56.031510] ov5640 1-003c: ov5640_write_reg: error: reg=3008, val=2
> > [ 56.649032] ov5640 1-003c: ov5640_write_reg: error: reg=3008, val=2
>
> This surprises me. I would have expected an issue with commit
> 1f391df44607 ("media: v4l2-async: Use endpoints in
> __v4l2_async_nf_add_fwnode_remote()") to prevent the ov5640 from being
> detected at all. Could you double-check the bisection, to verify that
> commit 229fac6c44dc works and commit 1f391df44607 doesn't ? What
> difference does it make in the full kernel log ?
>
If my understanding is correct, 1f391df44607 is unrelated as Aishwarya
reports " So, now when I try to revert the change done by this commit, it still
fails".
There is a long list of changes that went in with recent kernels for
ov5640 but I'm afraid I'm now sure how many of them have landed on
your BSP. Try to diff with a recent mainline, and then maybe bisect from
there ?
> > Setting pipeline to PAUSED ...
> > [ 57.082630] ov5640 1-003c: ov5640_write_reg: error: reg=3008, val=2
> > Pipeline is live and does not need PREROLL ...
> > Pipeline is PREROLLED ...
> > Setting pipeline to PLAYING ...
> > New clock: GstSystemClock
> > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Failed to allocate required memory.
> > Additional debug info:
> > ../gst-plugins-good-1.20.3/sys/v4l2/gstv4l2src.c(759):
> > gst_v4l2src_decide_allocation ():
> > /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > Buffer pool activation failed
> > Execution ended after 0:00:00.119459642
> > ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Internal data stream error.
> > Setting pipeline to NULL ...
> > Additional debug info:
> > ../gstreamer-1.20.3/libs/gst/base/gstbasesrc.c(3127): gst_base_src_loop(): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > streaming stopped, reason not-negotiated (-4)
> > Freeing pipeline ...
> > root@apalis-imx6-10774951:~# v4l2-ctl --device /dev/video3 --stream-mmap
> > --stream-to=x.raw --stream-count=1
> > [ 1124.339793] ov5640 1-003c: ov5640_write_reg: error: reg=3008, val=2
> > VIDIOC_STREAMON returned -1 (Broken pipe)
>
> --
> Regards,
>
> Laurent Pinchart
