From: Nas Chung <nas.chung@xxxxxxxxxxxxxxx> Add a TODO file with remaining elements to be improved/added. Signed-off-by: Robert Beckett <bob.beckett@xxxxxxxxxxxxx> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx> Signed-off-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx> Signed-off-by: Nas Chung <nas.chung@xxxxxxxxxxxxxxx> --- drivers/media/platform/chips-media/wave5/TODO | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 drivers/media/platform/chips-media/wave5/TODO diff --git a/drivers/media/platform/chips-media/wave5/TODO b/drivers/media/platform/chips-media/wave5/TODO new file mode 100644 index 000000000000..2164fd071a56 --- /dev/null +++ b/drivers/media/platform/chips-media/wave5/TODO @@ -0,0 +1,18 @@ +* Handle interrupts better + +Currently the interrupt handling uses an unusual design employing a kfifo to +transfer irq status to irq thread. This was done as a work around for dropped +interrupts seen with IRQF_ONESHOT based handling. + +This needs further investigation and fixing properly, with the aid of +C&M. + +* power management handling - add (runtime_)suspen/resume cb where the clock is enabled + +* revise logic of wave5_vpu_(dec/enc)_register_framebuffer + +* check if the normal kernel endianness/__swab32 routines are sufficient. (instead of the ones + implemented in the driver) + +* Adjust STREAMON routine for the stateful decoder to adhere to the API, which + declares that STREAMON can be called before source buffers have been queued. -- 2.25.1
