Here goes the DT bindings file. Signed-off-by: Petko Manolov <petko.manolov@xxxxxxxxxxxx> --- .../bindings/media/i2c/sony,imx492.yaml | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx492.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx492.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx492.yaml new file mode 100644 index 000000000000..f4feef17c677 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx492.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx492.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony imx492 Sensor + +maintainers: + - Petko Manolov <petko.manolov@xxxxxxxxxxxx> + +description: + + imx492 is a diagonal 23.1 mm (Type 1.4) CMOS image sensor with color or + monochrome square pixel array and approximately 47.08 M effective pixels. + 12-bit digital output makes it possible to output the signals with high + definition for moving pictures. It is programmable through I2C interface. The + I2C client address can be either 0x10 or 0x1a depending on SLASEL pin. Image + data is sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx492 + reg: + description: I2C address + maxItems: 1 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: Clock frequency 6MHz, 12MHz, 18MHz and 24MHz + maxItems: 1 + + dovdd-supply: + description: Interface power supply. + + avdd-supply: + description: Analog power supply. + + dvdd-supply: + description: Digital power supply. + + reset-gpios: + description: Reference to the GPIO connected to the XCLR pin, if any. + maxItems: 1 + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@10 { + compatible = "sony,imx492"; + reg = <0x10>; + clocks = <&imx492_clk>; + + assigned-clocks = <&imx492_clk>; + assigned-clock-parents = <&imx492_clk_parent>; + assigned-clock-rates = <24000000>; + + port { + imx492: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <600000000>; + }; + }; + }; + }; +... -- 2.30.2
