Hi Dave,
On Thu, Nov 24, 2022 at 06:31:51PM +0000, Dave Stevenson wrote:
> On Tue, 22 Nov 2022 at 22:34, Laurent Pinchart wrote:
> >
> > The probe() function is large. Make it more readable by factoring the
> > subdev initialization code out. While at it, rename the error labels as
> > the "free_" prefix isn't accurate.
> >
> > No functional change intended.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/imx290.c | 109 +++++++++++++++++++++----------------
> > 1 file changed, 62 insertions(+), 47 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index aae4f51941a1..4dbf218e7a63 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -1015,6 +1015,46 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
> > .link_validate = v4l2_subdev_link_validate,
> > };
> >
> > +static int imx290_subdev_init(struct imx290 *imx290)
> > +{
> > + struct i2c_client *client = to_i2c_client(imx290->dev);
> > + int ret;
> > +
> > + /*
> > + * Initialize the frame format. In particular, imx290->current_mode
> > + * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call
> > + * below relies on these fields.
> > + */
> > + imx290_entity_init_cfg(&imx290->sd, NULL);
> > +
> > + ret = imx290_ctrl_init(imx290);
> > + if (ret < 0) {
> > + dev_err(imx290->dev, "Control initialization error %d\n", ret);
> > + return ret;
> > + }
> > +
> > + v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> > + imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > + imx290->sd.dev = imx290->dev;
> > + imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> > + imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +
> > + imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> > + ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> > + if (ret < 0) {
> > + dev_err(imx290->dev, "Could not register media entity\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void imx290_subdev_cleanup(struct imx290 *imx290)
> > +{
> > + media_entity_cleanup(&imx290->sd.entity);
> > + v4l2_ctrl_handler_free(&imx290->ctrls);
> > +}
> > +
> > /* ----------------------------------------------------------------------------
> > * Power management
> > */
> > @@ -1148,10 +1188,10 @@ static int imx290_probe(struct i2c_client *client)
> > fwnode_handle_put(endpoint);
> > if (ret == -ENXIO) {
> > dev_err(dev, "Unsupported bus type, should be CSI2\n");
> > - goto free_err;
> > + goto err_endpoint;
> > } else if (ret) {
> > dev_err(dev, "Parsing endpoint node failed\n");
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > /* Get number of data lanes */
> > @@ -1159,7 +1199,7 @@ static int imx290_probe(struct i2c_client *client)
> > if (imx290->nlanes != 2 && imx290->nlanes != 4) {
> > dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes);
> > ret = -EINVAL;
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes);
> > @@ -1167,7 +1207,7 @@ static int imx290_probe(struct i2c_client *client)
> > if (!ep.nr_of_link_frequencies) {
> > dev_err(dev, "link-frequency property not found in DT\n");
> > ret = -EINVAL;
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > /* Check that link frequences for all the modes are in device tree */
> > @@ -1175,7 +1215,7 @@ static int imx290_probe(struct i2c_client *client)
> > if (fq) {
> > dev_err(dev, "Link frequency of %lld is not supported\n", fq);
> > ret = -EINVAL;
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > /* get system clock (xclk) */
> > @@ -1183,14 +1223,14 @@ static int imx290_probe(struct i2c_client *client)
> > if (IS_ERR(imx290->xclk)) {
> > dev_err(dev, "Could not get xclk");
> > ret = PTR_ERR(imx290->xclk);
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
> > &xclk_freq);
> > if (ret) {
> > dev_err(dev, "Could not get xclk frequency\n");
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > /* external clock must be 37.125 MHz */
> > @@ -1198,19 +1238,19 @@ static int imx290_probe(struct i2c_client *client)
> > dev_err(dev, "External clock frequency %u is not supported\n",
> > xclk_freq);
> > ret = -EINVAL;
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > ret = clk_set_rate(imx290->xclk, xclk_freq);
> > if (ret) {
> > dev_err(dev, "Could not set xclk frequency\n");
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > ret = imx290_get_regulators(dev, imx290);
> > if (ret < 0) {
> > dev_err(dev, "Cannot get regulators\n");
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset",
> > @@ -1218,55 +1258,33 @@ static int imx290_probe(struct i2c_client *client)
> > if (IS_ERR(imx290->rst_gpio)) {
> > dev_err(dev, "Cannot get reset gpio\n");
> > ret = PTR_ERR(imx290->rst_gpio);
> > - goto free_err;
> > + goto err_endpoint;
> > }
> >
> > mutex_init(&imx290->lock);
> >
> > - /*
> > - * Initialize the frame format. In particular, imx290->current_mode
> > - * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call
> > - * below relies on these fields.
> > - */
> > - imx290_entity_init_cfg(&imx290->sd, NULL);
> > -
> > - ret = imx290_ctrl_init(imx290);
> > - if (ret < 0) {
> > - dev_err(dev, "Control initialization error %d\n", ret);
> > - goto free_mutex;
> > - }
> > -
> > - v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> > - imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > - imx290->sd.dev = &client->dev;
> > - imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> > - imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > -
> > - imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> > - ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> > - if (ret < 0) {
> > - dev_err(dev, "Could not register media entity\n");
> > - goto free_ctrl;
> > - }
> > + ret = imx290_subdev_init(imx290);
> > + if (ret)
> > + goto err_mutex;
> >
> > ret = v4l2_async_register_subdev(&imx290->sd);
> > if (ret < 0) {
> > dev_err(dev, "Could not register v4l2 device\n");
> > - goto free_entity;
> > + goto err_subdev;
> > }
> >
> > /* Power on the device to match runtime PM state below */
> > ret = imx290_power_on(dev);
> > if (ret < 0) {
> > dev_err(dev, "Could not power on the device\n");
> > - goto free_entity;
> > + goto err_subdev;
> > }
> >
> > ret = imx290_read(imx290, IMX290_CHIP_ID, &chip_id);
> > if (ret) {
> > dev_err(dev, "Could not read chip ID: %d\n", ret);
> > imx290_power_off(dev);
> > - goto free_entity;
> > + goto err_subdev;
> > }
>
> Which tree is this patch based on, as neither Sakari nor Mauro's trees
> have this read in them.
> I suspect an older patch which added it got dropped due to the worry
> over Vision Component's modules which block 16 bit reads.
There's a local patch indeed, which I incorrectly put at the bottom of
the branch. It will be fixed in v2.
> >
> > dev_info(dev, "chip ID 0x%04x\n", chip_id);
> > @@ -1279,13 +1297,11 @@ static int imx290_probe(struct i2c_client *client)
> >
> > return 0;
> >
> > -free_entity:
> > - media_entity_cleanup(&imx290->sd.entity);
> > -free_ctrl:
> > - v4l2_ctrl_handler_free(&imx290->ctrls);
> > -free_mutex:
> > +err_subdev:
> > + imx290_subdev_cleanup(imx290);
> > +err_mutex:
> > mutex_destroy(&imx290->lock);
> > -free_err:
> > +err_endpoint:
> > v4l2_fwnode_endpoint_free(&ep);
> >
> > return ret;
> > @@ -1297,8 +1313,7 @@ static void imx290_remove(struct i2c_client *client)
> > struct imx290 *imx290 = to_imx290(sd);
> >
> > v4l2_async_unregister_subdev(sd);
> > - media_entity_cleanup(&sd->entity);
> > - v4l2_ctrl_handler_free(sd->ctrl_handler);
> > + imx290_subdev_cleanup(imx290);
> >
> > mutex_destroy(&imx290->lock);
> >
--
Regards,
Laurent Pinchart
