On 19/05/2022 18:29, Chris Morgan wrote: > From: Chris Morgan <macromorgan@xxxxxxxxxxx> > > Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm > MZP280 panel for the Raspberry Pi. > > Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> > --- > include/uapi/linux/media-bus-format.h | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h > index 0dfc11ee2..a7b765498 100644 > --- a/include/uapi/linux/media-bus-format.h > +++ b/include/uapi/linux/media-bus-format.h > @@ -34,13 +34,14 @@ > > #define MEDIA_BUS_FMT_FIXED 0x0001 > > -/* RGB - next is 0x101e */ > +/* RGB - next is 0x101f */ This would be 0x1023 > #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 > #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 > #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 > #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE 0x1003 > #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE 0x1004 > #define MEDIA_BUS_FMT_RGB565_1X16 0x1017 > +#define MEDIA_BUS_FMT_RGB565_1X24_CPADHI 0x101e and this 0x1022, based on the latest media tree. > #define MEDIA_BUS_FMT_BGR565_2X8_BE 0x1005 > #define MEDIA_BUS_FMT_BGR565_2X8_LE 0x1006 > #define MEDIA_BUS_FMT_RGB565_2X8_BE 0x1007 Otherwise: Acked-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> It's an old series by now, but as far as I am concerned this can go through the drm subsystem (after updating this value). Regards, Hans
