Rob, can you Ack (or nack) this old patch? It looks like it was
missed, most likely because the devicetree ML wasn't CCed.
Regards,
Hans
On 11/04/2022 09:48, Ming Qian wrote:
> Hyphen is recommended in node name than underscore.
> So change the node name from "vpu_core" to "vpu-core"
>
> Signed-off-by: Ming Qian <ming.qian@xxxxxxx>
> ---
> Documentation/devicetree/bindings/media/amphion,vpu.yaml | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> index a9d80eaeeeb6..c0d83d755239 100644
> --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> @@ -47,7 +47,7 @@ patternProperties:
> $ref: ../mailbox/fsl,mu.yaml#
>
>
> - "^vpu_core@[0-9a-f]+$":
> + "^vpu-core@[0-9a-f]+$":
> description:
> Each core correspond a decoder or encoder, need to configure them
> separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
> @@ -143,7 +143,7 @@ examples:
> power-domains = <&pd IMX_SC_R_VPU_MU_2>;
> };
>
> - vpu_core0: vpu_core@2d080000 {
> + vpu_core0: vpu-core@2d080000 {
> compatible = "nxp,imx8q-vpu-decoder";
> reg = <0x2d080000 0x10000>;
> power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
> @@ -154,7 +154,7 @@ examples:
> memory-region = <&decoder_boot>, <&decoder_rpc>;
> };
>
> - vpu_core1: vpu_core@2d090000 {
> + vpu_core1: vpu-core@2d090000 {
> compatible = "nxp,imx8q-vpu-encoder";
> reg = <0x2d090000 0x10000>;
> power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
> @@ -165,7 +165,7 @@ examples:
> memory-region = <&encoder1_boot>, <&encoder1_rpc>;
> };
>
> - vpu_core2: vpu_core@2d0a0000 {
> + vpu_core2: vpu-core@2d0a0000 {
> reg = <0x2d0a0000 0x10000>;
> compatible = "nxp,imx8q-vpu-encoder";
> power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
