On 21/11/2022 05:53, Sathyakam M wrote: > The FSD MIPI CSI2 Rx controller is compliant to MIPI CSI2 v1.3 and > D-PHY v1.2 specifications. > > There are up to maximum 4 data lanes (default). > Controls are provided for User to change number of lanes if needed. > > Both the video and v4l-subdev instances are exposed to the user > under /dev directory. > > The driver can be built as a loadable module or as a platform_driver. > > Signed-off-by: Sathyakam M <sathya@xxxxxxxxxxx> > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > Cc: Sathyakam M <sathya@xxxxxxxxxxx> > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Cc: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> > Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> > Cc: Ming Qian <ming.qian@xxxxxxx> > Cc: Dmitry Osipenko <digetx@xxxxxxxxx> > Cc: Jacopo Mondi <jacopo@xxxxxxxxxx> > Cc: Pankaj Kumar Dubey <pankaj.dubey@xxxxxxxxxxx> > Cc: linux-media@xxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > --- > .../media/drivers/fsd-csis-uapi.rst | 78 + > MAINTAINERS | 1 + > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 1 + > drivers/media/platform/fsd/Kconfig | 73 + > drivers/media/platform/fsd/Makefile | 1 + > drivers/media/platform/fsd/fsd-csis.c | 2664 +++++++++++++++++ > drivers/media/platform/fsd/fsd-csis.h | 785 +++++ drivers/media/platform/samsung/ Plus we have drivers for it, so please integrate with existing ones. Samsung is known of heavily reusing its IP core designs, so they are usually similar. Best regards, Krzysztof
