The changes here generally look good to me-- I've made most of these changes already and set aside 10 remaining items to test one-by-one when I have a more robust mainline testing setup (waiting for a UART adapter as my screen is not supported). There are two items I'll put out here now that may require further comment: * It looks like I'm required to add a Google copyright header unless I go through a cumbersome copyright release. Is this OK? * Is refactoring the register configurations a strict requirement? I'm concerned about the time involved, the likelihood of typos, and the lack of a diverse set of validators. Thanks for your diligence and your patience :-) -Nicholas On Mon, Nov 7, 2022 at 4:35 AM Jacopo Mondi <jacopo@xxxxxxxxxx> wrote: > > Hi Nicholas, > > On Sun, Nov 06, 2022 at 11:11:30AM -0600, Nicholas Roth wrote: > > Currently, the ov8858 image sensor is supported downstream in Manjaro > > [1], which depends on Megi's kernel [2]. > > > > TL;DR: This enables the PinePhone Pro's cameras to work in Waydroid. > > > > This is the front-facing (selfie) sensor in the PinePhone Pro. > > Work is ongoing to support the PinePhone Pro and other FOSS phone > > cameras in Waydroid [4], but libcamera's [3] contributing guidelines > > require sensors to be upstreamed. > > Not really something we might want in the kernel log, but I guess it > doesn't hurt. > > However I would make the commit message a bit more sensor specific and > leave out the description of your specific use case > > "Add support for Omnivision OV8858 image sensor. The OV8858 is an 8 > mega pixel image sensor which provides images in RAW format over MIPI > CSI-2 data bus and is controlled through an I2C-compatibile SCCB bus. > > This commit upports the driver from the PinePhone Pro BSP > https://megous.com/git/linux at revision > 4f15e3e06e2ca498ecd91ec4fee7400997fc9053. > > Tested on PinePhone Pro with Waydroi and libcamera HALv3. > > Signed-off-by: Nicholas Roth <nicholas@xxxxxxxxxxxxx> > " > > > > 1: https://gitlab.manjaro.org/manjaro-arm/packages/core/linux-pinephonepro/-/blob/6.0-megi/PKGBUILD > > 2: https://github.com/megous/linux > > 3: libcamera.org > > 4: https://github.com/waydroid/waydroid/issues/519 > > > > Signed-off-by: Nicholas Roth <nicholas@xxxxxxxxxxxxx> > > --- > > .../bindings/i2c/ovti,ov8858-i2c.yaml | 78 + > > Bindings in a separate patch with devicetree@xxxxxxxxxxxxxxx and DT > maintainers robh+dt@xxxxxxxxxx, krzysztof.kozlowski+dt@xxxxxxxxxx in > CC, as they might get in through a different tree. > > > drivers/media/i2c/Kconfig | 13 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/ov8858.c | 2102 +++++++++++++++++ > > Please also add and entry to MAINTAINERS file > > > 4 files changed, 2194 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/i2c/ovti,ov8858-i2c.yaml > > create mode 100644 drivers/media/i2c/ov8858.c > > > > diff --git a/Documentation/devicetree/bindings/i2c/ovti,ov8858-i2c.yaml b/Documentation/devicetree/bindings/i2c/ovti,ov8858-i2c.yaml > > new file mode 100644 > > index 000000000000..1300c1b6fa17 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/i2c/ovti,ov8858-i2c.yaml > > @@ -0,0 +1,78 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for OV8858 > > Please fix this and remove references to Freescale stuff. > Use as a reference bindings from some other image senso > This should be > > $id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Omnivision OV8858 raw image sensor > > > > + > > +allOf: > > + - $ref: /schemas/i2c/i2c-controller.yaml# > > Unrelated, please drop. > > > + > > +properties: > > + compatible: ovti,ov8858 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > Please use as starting point the bindings documentation for another > image sensor in Documentation/devicetree/bindings/media/i2c/ and not > an I2C controller chip. > > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + const: xvclk > > + > > + clock-frequency: > > + minimum: 24000000 > > + default: 24000000 > > + maximum: 24000000 > > Bindings are about HW capabilities not what's implemented in the > driver. > > The range of supported input clock frequencies, according to the > datasheet is [6,27]MHz > > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + > > Missing "ports" and "endpoints". Please read > Documentation/devicetree/bindings/media/video-interfaces.yaml > > and check existing bindings to see how to reference > the video-interfaces.yaml properties supported by your sensor > > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + i2c@ff110000 { > > + status = "okay"; > > + > > + clock-frequency = <400000>; > > + i2c-scl-rising-time-ns = <300>; > > + i2c-scl-falling-time-ns = <15>; > > + > > + pinctrl-0 = <&i2c1_xfer &cif_clkouta>; > > + > > + assigned-clocks = <&cru SCLK_CIF_OUT &cru SCLK_CIF_OUT_SRC>; > > + assigned-clock-parents = <&cru SCLK_CIF_OUT_SRC &cru PLL_GPLL>; > > + assigned-clock-rates = <19200000 0>; > > + ucam: camera@36 { > > + compatible = "ovti,ov8858"; > > + reg = <0x36>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ucam_pdn &ucam_rst>; > > + > > + clocks = <&cru SCLK_CIF_OUT>; > > + clock-names = "xvclk"; > > + > > + dovdd-supply = <&vcc1v8_dvp>; > > + /*XXX: also depends on vcca1v8_codec for I2C bus power */ > > + > > + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; > > + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; > > + > > + rotation = <180>; > > + > > + port { > > + ucam_out: endpoint { > > + remote-endpoint = <&mipi_in_ucam>; > > + data-lanes = <1 2 3 4>; > > + }; > > + }; > > + }; > > + }; > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index 7806d4b81716..bca35574c5e3 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -619,6 +619,19 @@ config VIDEO_OV8856 > > To compile this driver as a module, choose M here: the > > module will be called ov8856. > > > > +config VIDEO_OV8858 > > + tristate "OmniVision OV8858 sensor support" > > + depends on I2C && VIDEO_DEV > > + select MEDIA_CONTROLLER > > + select VIDEO_V4L2_SUBDEV_API > > + select V4L2_FWNODE > > + help > > + This is a Video4Linux2 sensor driver for the OmniVision > > + OV8858 camera sensor. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called ov8858. > > + > > config VIDEO_OV8865 > > tristate "OmniVision OV8865 sensor support" > > depends on I2C && PM && VIDEO_DEV > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index 0a2933103dd9..d44934fbb92b 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -94,6 +94,7 @@ obj-$(CONFIG_VIDEO_OV7670) += ov7670.o > > obj-$(CONFIG_VIDEO_OV772X) += ov772x.o > > obj-$(CONFIG_VIDEO_OV7740) += ov7740.o > > obj-$(CONFIG_VIDEO_OV8856) += ov8856.o > > +obj-$(CONFIG_VIDEO_OV8858) += ov8858.o > > obj-$(CONFIG_VIDEO_OV8865) += ov8865.o > > obj-$(CONFIG_VIDEO_OV9282) += ov9282.o > > obj-$(CONFIG_VIDEO_OV9640) += ov9640.o > > diff --git a/drivers/media/i2c/ov8858.c b/drivers/media/i2c/ov8858.c > > new file mode 100644 > > index 000000000000..f74600ba7662 > > --- /dev/null > > +++ b/drivers/media/i2c/ov8858.c > > @@ -0,0 +1,2102 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * ov8858 driver > > + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd. > > + * v0.1.0x00 : 1. create file. > > + * V0.0X01.0X02 fix mclk issue when probe multiple camera. > > + * V0.0X01.0X03 add enum_frame_interval function. > > Maybe not necessary and please consider adding your copyright if you > think it's relevant > > > > + */ > > + > > +#include <linux/clk.h> > > +#include <linux/device.h> > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/of.h> > > +#include <linux/of_graph.h> > > +#include <linux/regulator/consumer.h> > > +#include <linux/sysfs.h> > > What for ? > > > +#include <linux/slab.h> > > Is this required ? > > > +#include <linux/pinctrl/consumer.h> > > +#include <linux/version.h> > > Also these two seems not necessary ? > > > + > > +#include <media/v4l2-async.h> > > +#include <media/media-entity.h> > > +#include <media/v4l2-common.h> > > +#include <media/v4l2-ctrls.h> > > +#include <media/v4l2-device.h> > > +#include <media/v4l2-event.h> > > +#include <media/v4l2-fwnode.h> > > +#include <media/v4l2-image-sizes.h> > > +#include <media/v4l2-mediabus.h> > > +#include <media/v4l2-subdev.h> > > + > > +#ifndef V4L2_CID_DIGITAL_GAIN > > +#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN > > +#endif > > Suspicious... Why are you re-defining this ? The driver will look like > it is operating V4L2_CID_DIGITAL_GAIN but userspace will see > V4L2_CID_GAIN. Why that ? Use V4L2_CID_GAIN directly, or if the driver > supports handling analogue and digital gain separately (something I > recall it did) use V4L2_CID_DIGITAL_GAIN > > > > +#define OV8858_PIXEL_RATE (360000000LL * 2LL * 2LL / 10LL) > > Carefull as this hardcodes operations with 2 data lanes > > > + > > +#define MIPI_FREQ 360000000U > > +#define OV8858_XVCLK_FREQ 24000000 > > + > > +#define CHIP_ID 0x008858 > > +#define OV8858_REG_CHIP_ID 0x300a > > + > > +#define OV8858_REG_CTRL_MODE 0x0100 > > +#define OV8858_MODE_SW_STANDBY 0x0 > > +#define OV8858_MODE_STREAMING 0x1 > > + > > +#define OV8858_REG_EXPOSURE 0x3500 > > +#define OV8858_EXPOSURE_MIN 4 > > +#define OV8858_EXPOSURE_STEP 1 > > +#define OV8858_VTS_MAX 0x7fff > > + > > +#define OV8858_REG_GAIN_H 0x3508 > > +#define OV8858_REG_GAIN_L 0x3509 > > +#define OV8858_GAIN_H_MASK 0x07 > > +#define OV8858_GAIN_H_SHIFT 8 > > +#define OV8858_GAIN_L_MASK 0xff > > +#define OV8858_GAIN_MIN 0x0 > > +#define OV8858_GAIN_MAX 0x7ff > > +#define OV8858_GAIN_STEP 1 > > +#define OV8858_GAIN_DEFAULT 0x80 > > + > > +#define OV8858_REG_DGAIN_H 0x350a > > +#define OV8858_REG_DGAIN_L 0x350b > > +#define OV8858_DGAIN_H_MASK 0xff > > +#define OV8858_DGAIN_H_SHIFT 6 > > +#define OV8858_DGAIN_L_MASK 0x3f > > +#define OV8858_DGAIN_MIN 0x0 > > +#define OV8858_DGAIN_MAX 0x3fff > > +#define OV8858_DGAIN_STEP 1 > > +#define OV8858_DGAIN_DEFAULT 0x200 > > + > > +#define OV8858_REG_TEST_PATTERN 0x5e00 > > +#define OV8858_TEST_PATTERN_ENABLE 0x80 > > +#define OV8858_TEST_PATTERN_DISABLE 0x0 > > + > > +#define OV8858_REG_VTS 0x380e > > + > > +#define REG_NULL 0xFFFF > > + > > +#define OV8858_REG_VALUE_08BIT 1 > > +#define OV8858_REG_VALUE_16BIT 2 > > +#define OV8858_REG_VALUE_24BIT 3 > > + > > +#define OV8858_LANES 2 > > +#define OV8858_BITS_PER_SAMPLE 10 > > + > > +#define OV8858_CHIP_REVISION_REG 0x302A > > +#define OV8858_R1A 0xb0 > > +#define OV8858_R2A 0xb2 > > + > > +#define OV8858_NAME "ov8858" > > +#define OV8858_MEDIA_BUS_FMT MEDIA_BUS_FMT_SBGGR10_1X10 > > + > > +#define ov8858_write_1byte(client, reg, val) \ > > + ov8858_write_reg((client), (reg), OV8858_REG_VALUE_08BIT, (val)) > > + > > +#define ov8858_read_1byte(client, reg, val) \ > > + ov8858_read_reg((client), (reg), OV8858_REG_VALUE_08BIT, (val)) > > + > > +static const struct regval *ov8858_global_regs; > > + > > +static const char * const ov8858_supply_names[] = { > > + "avdd", /* Analog power */ > > + "dovdd", /* Digital I/O power */ > > + "dvdd", /* Digital core power */ > > +}; > > + > > +#define OV8858_NUM_SUPPLIES ARRAY_SIZE(ov8858_supply_names) > > + > > +struct regval { > > + u16 addr; > > + u8 val; > > +}; > > + > > +struct ov8858_mode { > > + u32 width; > > + u32 height; > > + struct v4l2_fract max_fps; > > + u32 hts_def; > > + u32 vts_def; > > + u32 exp_def; > > + const struct regval *reg_list; > > +}; > > + > > +struct ov8858 { > > + struct i2c_client *client; > > + struct clk *xvclk; > > + struct gpio_desc *reset_gpio; > > + struct gpio_desc *pwdn_gpio; > > + struct regulator_bulk_data supplies[OV8858_NUM_SUPPLIES]; > > + > > + struct pinctrl *pinctrl; > > + struct pinctrl_state *pins_default; > > + struct pinctrl_state *pins_sleep; > > + > > + struct v4l2_subdev subdev; > > + struct media_pad pad; > > + struct v4l2_ctrl_handler ctrl_handler; > > + struct v4l2_ctrl *exposure; > > + struct v4l2_ctrl *anal_gain; > > + struct v4l2_ctrl *digi_gain; > > + struct v4l2_ctrl *hblank; > > + struct v4l2_ctrl *vblank; > > + struct v4l2_ctrl *test_pattern; > > Please only store references to controls that are used outside of the > control initialization routine (exposure hblank and vblank only, if I > read it right) > > > + struct mutex mutex; > > Please add a comment about what this mutex protects > > > + bool streaming; > > + const struct ov8858_mode *cur_mode; > > + bool is_r2a; > > + unsigned int lane_num; > > + unsigned int cfg_num; > > + unsigned int pixel_rate; > > Suspicious as these parameters seems to be fixed in the driver > > > +}; > > + > > +#define to_ov8858(sd) container_of(sd, struct ov8858, subdev) > > + > > +/* > > + * Xclk 24Mhz > > + */ > > Fits on a single line > > /* xclk 24MHz */ > > > +static const struct regval ov8858_global_regs_r1a[] = { > > Do you know what r1a and r2a refers to and what version you are > testing with ? > > > + //@@5.1.1.1 Initialization (Global Setting) > > + //; Slave_ID=0x6c; > > + //{0x0103 ,0x01 }, software reset > > + {0x0100, 0x00}, > > + {0x0100, 0x00}, > > + {0x0100, 0x00}, > > + {0x0100, 0x00}, > > + {0x0302, 0x1e}, > > + {0x0303, 0x00}, > > + {0x0304, 0x03}, > > + {0x030e, 0x00}, > > + {0x030f, 0x09}, > > + {0x0312, 0x01}, > > + {0x031e, 0x0c}, > > + {0x3600, 0x00}, > > + {0x3601, 0x00}, > > + {0x3602, 0x00}, > > + {0x3603, 0x00}, > > + {0x3604, 0x22}, > > + {0x3605, 0x30}, > > + {0x3606, 0x00}, > > + {0x3607, 0x20}, > > + {0x3608, 0x11}, > > + {0x3609, 0x28}, > > + {0x360a, 0x00}, > > + {0x360b, 0x06}, > > + {0x360c, 0xdc}, > > + {0x360d, 0x40}, > > + {0x360e, 0x0c}, > > + {0x360f, 0x20}, > > + {0x3610, 0x07}, > > + {0x3611, 0x20}, > > + {0x3612, 0x88}, > > + {0x3613, 0x80}, > > + {0x3614, 0x58}, > > + {0x3615, 0x00}, > > + {0x3616, 0x4a}, > > + {0x3617, 0xb0}, > > + {0x3618, 0x56}, > > + {0x3619, 0x70}, > > + {0x361a, 0x99}, > > + {0x361b, 0x00}, > > + {0x361c, 0x07}, > > + {0x361d, 0x00}, > > + {0x361e, 0x00}, > > + {0x361f, 0x00}, > > + {0x3638, 0xff}, > > + {0x3633, 0x0c}, > > + {0x3634, 0x0c}, > > + {0x3635, 0x0c}, > > + {0x3636, 0x0c}, > > + {0x3645, 0x13}, > > + {0x3646, 0x83}, > > + {0x364a, 0x07}, > > + {0x3015, 0x01}, > > + {0x3018, 0x32}, > > + {0x3020, 0x93}, > > + {0x3022, 0x01}, > > + {0x3031, 0x0a}, > > + {0x3034, 0x00}, > > + {0x3106, 0x01}, > > + {0x3305, 0xf1}, > > + {0x3308, 0x00}, > > + {0x3309, 0x28}, > > + {0x330a, 0x00}, > > + {0x330b, 0x20}, > > + {0x330c, 0x00}, > > + {0x330d, 0x00}, > > + {0x330e, 0x00}, > > + {0x330f, 0x40}, > > + {0x3307, 0x04}, > > + {0x3500, 0x00}, > > + {0x3501, 0x4d}, > > + {0x3502, 0x40}, > > + {0x3503, 0x00}, > > + {0x3505, 0x80}, > > + {0x3508, 0x04}, > > + {0x3509, 0x00}, > > + {0x350c, 0x00}, > > + {0x350d, 0x80}, > > + {0x3510, 0x00}, > > + {0x3511, 0x02}, > > + {0x3512, 0x00}, > > + {0x3700, 0x18}, > > + {0x3701, 0x0c}, > > + {0x3702, 0x28}, > > + {0x3703, 0x19}, > > + {0x3704, 0x14}, > > + {0x3705, 0x00}, > > + {0x3706, 0x35}, > > + {0x3707, 0x04}, > > + {0x3708, 0x24}, > > + {0x3709, 0x33}, > > + {0x370a, 0x00}, > > + {0x370b, 0xb5}, > > + {0x370c, 0x04}, > > + {0x3718, 0x12}, > > + {0x3719, 0x31}, > > + {0x3712, 0x42}, > > + {0x3714, 0x24}, > > + {0x371e, 0x19}, > > + {0x371f, 0x40}, > > + {0x3720, 0x05}, > > + {0x3721, 0x05}, > > + {0x3724, 0x06}, > > + {0x3725, 0x01}, > > + {0x3726, 0x06}, > > + {0x3728, 0x05}, > > + {0x3729, 0x02}, > > + {0x372a, 0x03}, > > + {0x372b, 0x53}, > > + {0x372c, 0xa3}, > > + {0x372d, 0x53}, > > + {0x372e, 0x06}, > > + {0x372f, 0x10}, > > + {0x3730, 0x01}, > > + {0x3731, 0x06}, > > + {0x3732, 0x14}, > > + {0x3733, 0x10}, > > + {0x3734, 0x40}, > > + {0x3736, 0x20}, > > + {0x373a, 0x05}, > > + {0x373b, 0x06}, > > + {0x373c, 0x0a}, > > + {0x373e, 0x03}, > > + {0x3755, 0x10}, > > + {0x3758, 0x00}, > > + {0x3759, 0x4c}, > > + {0x375a, 0x06}, > > + {0x375b, 0x13}, > > + {0x375c, 0x20}, > > + {0x375d, 0x02}, > > + {0x375e, 0x00}, > > + {0x375f, 0x14}, > > + {0x3768, 0x22}, > > + {0x3769, 0x44}, > > + {0x376a, 0x44}, > > + {0x3761, 0x00}, > > + {0x3762, 0x00}, > > + {0x3763, 0x00}, > > + {0x3766, 0xff}, > > + {0x376b, 0x00}, > > + {0x3772, 0x23}, > > + {0x3773, 0x02}, > > + {0x3774, 0x16}, > > + {0x3775, 0x12}, > > + {0x3776, 0x04}, > > + {0x3777, 0x00}, > > + {0x3778, 0x1b}, > > + {0x37a0, 0x44}, > > + {0x37a1, 0x3d}, > > + {0x37a2, 0x3d}, > > + {0x37a3, 0x00}, > > + {0x37a4, 0x00}, > > + {0x37a5, 0x00}, > > + {0x37a6, 0x00}, > > + {0x37a7, 0x44}, > > + {0x37a8, 0x4c}, > > + {0x37a9, 0x4c}, > > + {0x3760, 0x00}, > > + {0x376f, 0x01}, > > + {0x37aa, 0x44}, > > + {0x37ab, 0x2e}, > > + {0x37ac, 0x2e}, > > + {0x37ad, 0x33}, > > + {0x37ae, 0x0d}, > > + {0x37af, 0x0d}, > > + {0x37b0, 0x00}, > > + {0x37b1, 0x00}, > > + {0x37b2, 0x00}, > > + {0x37b3, 0x42}, > > + {0x37b4, 0x42}, > > + {0x37b5, 0x33}, > > + {0x37b6, 0x00}, > > + {0x37b7, 0x00}, > > + {0x37b8, 0x00}, > > + {0x37b9, 0xff}, > > + {0x3800, 0x00}, > > + {0x3801, 0x0c}, > > + {0x3802, 0x00}, > > + {0x3803, 0x0c}, > > + {0x3804, 0x0c}, > > + {0x3805, 0xd3}, > > + {0x3806, 0x09}, > > + {0x3807, 0xa3}, > > + {0x3808, 0x06}, > > + {0x3809, 0x60}, > > + {0x380a, 0x04}, > > + {0x380b, 0xc8}, > > + {0x380c, 0x07}, > > + {0x380d, 0x88}, > > + {0x380e, 0x04}, > > + {0x380f, 0xdc}, > > + {0x3810, 0x00}, > > + {0x3811, 0x04}, > > + {0x3813, 0x02}, > > + {0x3814, 0x03}, > > + {0x3815, 0x01}, > > + {0x3820, 0x00}, > > + {0x3821, 0x67}, > > + {0x382a, 0x03}, > > + {0x382b, 0x01}, > > + {0x3830, 0x08}, > > + {0x3836, 0x02}, > > + {0x3837, 0x18}, > > + {0x3841, 0xff}, > > + {0x3846, 0x48}, > > + {0x3d85, 0x14}, > > + {0x3f08, 0x08}, > > + {0x3f0a, 0x80}, > > + {0x4000, 0xf1}, > > + {0x4001, 0x10}, > > + {0x4005, 0x10}, > > + {0x4002, 0x27}, > > + {0x4009, 0x81}, > > + {0x400b, 0x0c}, > > + {0x401b, 0x00}, > > + {0x401d, 0x00}, > > + {0x4020, 0x00}, > > + {0x4021, 0x04}, > > + {0x4022, 0x04}, > > + {0x4023, 0xb9}, > > + {0x4024, 0x05}, > > + {0x4025, 0x2a}, > > + {0x4026, 0x05}, > > + {0x4027, 0x2b}, > > + {0x4028, 0x00}, > > + {0x4029, 0x02}, > > + {0x402a, 0x04}, > > + {0x402b, 0x04}, > > + {0x402c, 0x02}, > > + {0x402d, 0x02}, > > + {0x402e, 0x08}, > > + {0x402f, 0x02}, > > + {0x401f, 0x00}, > > + {0x4034, 0x3f}, > > + {0x403d, 0x04}, > > + {0x4300, 0xff}, > > + {0x4301, 0x00}, > > + {0x4302, 0x0f}, > > + {0x4316, 0x00}, > > + {0x4500, 0x38}, > > + {0x4503, 0x18}, > > + {0x4600, 0x00}, > > + {0x4601, 0xcb}, > > + {0x481f, 0x32}, > > + {0x4837, 0x16}, > > + {0x4850, 0x10}, > > + {0x4851, 0x32}, > > + {0x4b00, 0x2a}, > > + {0x4b0d, 0x00}, > > + {0x4d00, 0x04}, > > + {0x4d01, 0x18}, > > + {0x4d02, 0xc3}, > > + {0x4d03, 0xff}, > > + {0x4d04, 0xff}, > > + {0x4d05, 0xff}, > > + {0x5000, 0x7e}, > > + {0x5001, 0x01}, > > + {0x5002, 0x08}, > > + {0x5003, 0x20}, > > + {0x5046, 0x12}, > > + {0x5901, 0x00}, > > + {0x5e00, 0x00}, > > + {0x5e01, 0x41}, > > + {0x382d, 0x7f}, > > + {0x4825, 0x3a}, > > + {0x4826, 0x40}, > > + {0x4808, 0x25}, > > + //{0x0100, 0x01}, > > + {REG_NULL, 0x00}, > > +}; > > + > > +/* > > + * Xclk 24Mhz > > + */ > > Ditto > > > +static const struct regval ov8858_global_regs_r2a_2lane[] = { > > + // MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz. > > + // > > + // > > + // v00_01_00 (05/29/2014) : initial setting > > + // > > + // AM19 : 3617 <- 0xC0 > > + // > > + // AM20 : change FWC_6K_EN to be default 0x3618=0x5a > > I guess we can keep these comments around for reference.. > > > + {0x0103, 0x01},// software reset for OVTATool only > > Not going to ask to review the register tables, but this really seems > duplicated. As we have to resort to trusting this black magic blobs, > I'm fine if you don't want to change these > > > + {0x0103, 0x01},// software reset > > + {0x0100, 0x00},// software standby > > + {0x0302, 0x1e},// pll1_multi > > + {0x0303, 0x00},// pll1_divm > > + {0x0304, 0x03},// pll1_div_mipi > > + {0x030e, 0x02},// pll2_rdiv > > + {0x030f, 0x04},// pll2_divsp > > + {0x0312, 0x03},// pll2_pre_div0, pll2_r_divdac > > + {0x031e, 0x0c},// pll1_no_lat > > + {0x3600, 0x00}, > > + {0x3601, 0x00}, > > + {0x3602, 0x00}, > > + {0x3603, 0x00}, > > + {0x3604, 0x22}, > > + {0x3605, 0x20}, > > + {0x3606, 0x00}, > > + {0x3607, 0x20}, > > + {0x3608, 0x11}, > > + {0x3609, 0x28}, > > + {0x360a, 0x00}, > > + {0x360b, 0x05}, > > + {0x360c, 0xd4}, > > + {0x360d, 0x40}, > > + {0x360e, 0x0c}, > > + {0x360f, 0x20}, > > + {0x3610, 0x07}, > > + {0x3611, 0x20}, > > + {0x3612, 0x88}, > > + {0x3613, 0x80}, > > + {0x3614, 0x58}, > > + {0x3615, 0x00}, > > + {0x3616, 0x4a}, > > + {0x3617, 0x90}, > > + {0x3618, 0x5a}, > > + {0x3619, 0x70}, > > + {0x361a, 0x99}, > > + {0x361b, 0x0a}, > > + {0x361c, 0x07}, > > + {0x361d, 0x00}, > > + {0x361e, 0x00}, > > + {0x361f, 0x00}, > > + {0x3638, 0xff}, > > + {0x3633, 0x0f}, > > + {0x3634, 0x0f}, > > + {0x3635, 0x0f}, > > + {0x3636, 0x12}, > > + {0x3645, 0x13}, > > + {0x3646, 0x83}, > > + {0x364a, 0x07}, > > + {0x3015, 0x00}, > > + {0x3018, 0x32}, // MIPI 2 lane > > + {0x3020, 0x93}, // Clock switch output normal, pclk_div =/1 > > + {0x3022, 0x01}, // pd_mipi enable when rst_sync > > + {0x3031, 0x0a}, // MIPI 10-bit mode > > + {0x3034, 0x00}, // > > + {0x3106, 0x01}, // sclk_div, sclk_pre_div > > + {0x3305, 0xf1}, > > + {0x3308, 0x00}, > > + {0x3309, 0x28}, > > + {0x330a, 0x00}, > > + {0x330b, 0x20}, > > + {0x330c, 0x00}, > > + {0x330d, 0x00}, > > + {0x330e, 0x00}, > > + {0x330f, 0x40}, > > + {0x3307, 0x04}, > > + {0x3500, 0x00}, // exposure H > > + {0x3501, 0x4d}, // exposure M > > + {0x3502, 0x40}, // exposure L > > + {0x3503, 0x80}, // gain delay ?, exposure delay 1 frame, real gain > > + {0x3505, 0x80}, // gain option > > + {0x3508, 0x02}, // gain H > > + {0x3509, 0x00}, // gain L > > + {0x350c, 0x00}, // short gain H > > + {0x350d, 0x80}, // short gain L > > + {0x3510, 0x00}, // short exposure H > > + {0x3511, 0x02}, // short exposure M > > + {0x3512, 0x00}, // short exposure L > > + {0x3700, 0x18}, > > + {0x3701, 0x0c}, > > + {0x3702, 0x28}, > > + {0x3703, 0x19}, > > + {0x3704, 0x14}, > > + {0x3705, 0x00}, > > + {0x3706, 0x82}, > > + {0x3707, 0x04}, > > + {0x3708, 0x24}, > > + {0x3709, 0x33}, > > + {0x370a, 0x01}, > > + {0x370b, 0x82}, > > + {0x370c, 0x04}, > > + {0x3718, 0x12}, > > + {0x3719, 0x31}, > > + {0x3712, 0x42}, > > + {0x3714, 0x24}, > > + {0x371e, 0x19}, > > + {0x371f, 0x40}, > > + {0x3720, 0x05}, > > + {0x3721, 0x05}, > > + {0x3724, 0x06}, > > + {0x3725, 0x01}, > > + {0x3726, 0x06}, > > + {0x3728, 0x05}, > > + {0x3729, 0x02}, > > + {0x372a, 0x03}, > > + {0x372b, 0x53}, > > + {0x372c, 0xa3}, > > + {0x372d, 0x53}, > > + {0x372e, 0x06}, > > + {0x372f, 0x10}, > > + {0x3730, 0x01}, > > + {0x3731, 0x06}, > > + {0x3732, 0x14}, > > + {0x3733, 0x10}, > > + {0x3734, 0x40}, > > + {0x3736, 0x20}, > > + {0x373a, 0x05}, > > + {0x373b, 0x06}, > > + {0x373c, 0x0a}, > > + {0x373e, 0x03}, > > + {0x3750, 0x0a}, > > + {0x3751, 0x0e}, > > + {0x3755, 0x10}, > > + {0x3758, 0x00}, > > + {0x3759, 0x4c}, > > + {0x375a, 0x06}, > > + {0x375b, 0x13}, > > + {0x375c, 0x20}, > > + {0x375d, 0x02}, > > + {0x375e, 0x00}, > > + {0x375f, 0x14}, > > + {0x3768, 0x22}, > > + {0x3769, 0x44}, > > + {0x376a, 0x44}, > > + {0x3761, 0x00}, > > + {0x3762, 0x00}, > > + {0x3763, 0x00}, > > + {0x3766, 0xff}, > > + {0x376b, 0x00}, > > + {0x3772, 0x23}, > > + {0x3773, 0x02}, > > + {0x3774, 0x16}, > > + {0x3775, 0x12}, > > + {0x3776, 0x04}, > > + {0x3777, 0x00}, > > + {0x3778, 0x17}, > > + {0x37a0, 0x44}, > > + {0x37a1, 0x3d}, > > + {0x37a2, 0x3d}, > > + {0x37a3, 0x00}, > > + {0x37a4, 0x00}, > > + {0x37a5, 0x00}, > > + {0x37a6, 0x00}, > > + {0x37a7, 0x44}, > > + {0x37a8, 0x4c}, > > + {0x37a9, 0x4c}, > > + {0x3760, 0x00}, > > + {0x376f, 0x01}, > > + {0x37aa, 0x44}, > > + {0x37ab, 0x2e}, > > + {0x37ac, 0x2e}, > > + {0x37ad, 0x33}, > > + {0x37ae, 0x0d}, > > + {0x37af, 0x0d}, > > + {0x37b0, 0x00}, > > + {0x37b1, 0x00}, > > + {0x37b2, 0x00}, > > + {0x37b3, 0x42}, > > + {0x37b4, 0x42}, > > + {0x37b5, 0x31}, > > + {0x37b6, 0x00}, > > + {0x37b7, 0x00}, > > + {0x37b8, 0x00}, > > + {0x37b9, 0xff}, > > + {0x3800, 0x00}, // x start H > > + {0x3801, 0x0c}, // x start L > > + {0x3802, 0x00}, // y start H > > + {0x3803, 0x0c}, // y start L > > + {0x3804, 0x0c}, // x end H > > + {0x3805, 0xd3}, // x end L > > + {0x3806, 0x09}, // y end H > > + {0x3807, 0xa3}, // y end L > > + {0x3808, 0x06}, // x output size H > > + {0x3809, 0x60}, // x output size L > > + {0x380a, 0x04}, // y output size H > > + {0x380b, 0xc8}, // y output size L > > + {0x380c, 0x07}, // HTS H > > + {0x380d, 0x88}, // HTS L > > + {0x380e, 0x04}, // VTS H > > + {0x380f, 0xdc}, // VTS L > > + {0x3810, 0x00}, // ISP x win H > > + {0x3811, 0x04}, // ISP x win L > > + {0x3813, 0x02}, // ISP y win L > > + {0x3814, 0x03}, // x odd inc > > + {0x3815, 0x01}, // x even inc > > + {0x3820, 0x00}, // vflip off > > + {0x3821, 0x67}, // mirror on, bin on > > + {0x382a, 0x03}, // y odd inc > > + {0x382b, 0x01}, // y even inc > > + {0x3830, 0x08}, // > > + {0x3836, 0x02}, // > > + {0x3837, 0x18}, // > > + {0x3841, 0xff}, // window auto size enable > > + {0x3846, 0x48}, // > > + {0x3d85, 0x16}, // OTP power up load data enable with BIST > > + {0x3d8c, 0x73}, // OTP setting start High > > + {0x3d8d, 0xde}, // OTP setting start Low > > + {0x3f08, 0x08}, // > > + {0x3f0a, 0x00}, // > > + {0x4000, 0xf1}, // out_range_trig, format_chg_trig > > + {0x4001, 0x10}, // total 128 black column > > + {0x4005, 0x10}, // BLC target L > > + {0x4002, 0x27}, // value used to limit BLC offset > > + {0x4009, 0x81}, // final BLC offset limitation enable > > + {0x400b, 0x0c}, // DCBLC on, DCBLC manual mode on > > + {0x401b, 0x00}, // zero line R coefficient > > + {0x401d, 0x00}, // zoro line T coefficient > > + {0x4020, 0x00}, // Anchor left start H > > + {0x4021, 0x04}, // Anchor left start L > > + {0x4022, 0x06}, // Anchor left end H > > + {0x4023, 0x00}, // Anchor left end L > > + {0x4024, 0x0f}, // Anchor right start H > > + {0x4025, 0x2a}, // Anchor right start L > > + {0x4026, 0x0f}, // Anchor right end H > > + {0x4027, 0x2b}, // Anchor right end L > > + {0x4028, 0x00}, // top zero line start > > + {0x4029, 0x02}, // top zero line number > > + {0x402a, 0x04}, // top black line start > > + {0x402b, 0x04}, // top black line number > > + {0x402c, 0x00}, // bottom zero line start > > + {0x402d, 0x02}, // bottom zoro line number > > + {0x402e, 0x04}, // bottom black line start > > + {0x402f, 0x04}, // bottom black line number > > + {0x401f, 0x00}, // interpolation x/y disable, Anchor one disable > > + {0x4034, 0x3f}, // > > + {0x403d, 0x04}, // md_precision_en > > + {0x4300, 0xff}, // clip max H > > + {0x4301, 0x00}, // clip min H > > + {0x4302, 0x0f}, // clip min L, clip max L > > + {0x4316, 0x00}, // > > + {0x4500, 0x58}, // > > + {0x4503, 0x18}, // > > + {0x4600, 0x00}, // > > + {0x4601, 0xcb}, // > > + {0x481f, 0x32}, // clk prepare min > > + {0x4837, 0x16}, // global timing > > + {0x4850, 0x10}, // lane 1 = 1, lane 0 = 0 > > + {0x4851, 0x32}, // lane 3 = 3, lane 2 = 2 > > + {0x4b00, 0x2a}, // > > + {0x4b0d, 0x00}, // > > + {0x4d00, 0x04}, // temperature sensor > > + {0x4d01, 0x18}, // > > + {0x4d02, 0xc3}, // > > + {0x4d03, 0xff}, // > > + {0x4d04, 0xff}, // > > + {0x4d05, 0xff}, // temperature sensor > > + {0x5000, 0xfe}, // lenc on, slave/master AWB gain/statistics enable > > + {0x5001, 0x01}, // BLC on > > + {0x5002, 0x08}, // H scale off, WBMATCH off, OTP_DPC > > + {0x5003, 0x20}, // DPC_DBC buffer control enable, WB > > + {0x501e, 0x93}, // enable digital gain > > + {0x5046, 0x12}, // > > + {0x5780, 0x3e}, // DPC > > + {0x5781, 0x0f}, // > > + {0x5782, 0x44}, // > > + {0x5783, 0x02}, // > > + {0x5784, 0x01}, // > > + {0x5785, 0x00}, // > > + {0x5786, 0x00}, // > > + {0x5787, 0x04}, // > > + {0x5788, 0x02}, // > > + {0x5789, 0x0f}, // > > + {0x578a, 0xfd}, // > > + {0x578b, 0xf5}, // > > + {0x578c, 0xf5}, // > > + {0x578d, 0x03}, // > > + {0x578e, 0x08}, // > > + {0x578f, 0x0c}, // > > + {0x5790, 0x08}, // > > + {0x5791, 0x04}, // > > + {0x5792, 0x00}, // > > + {0x5793, 0x52}, // > > + {0x5794, 0xa3}, // DPC > > + {0x5871, 0x0d}, // Lenc > > + {0x5870, 0x18}, // > > + {0x586e, 0x10}, // > > + {0x586f, 0x08}, // > > + {0x58f7, 0x01}, // > > + {0x58f8, 0x3d}, // Lenc > > + {0x5901, 0x00}, // H skip off, V skip off > > + {0x5b00, 0x02}, // OTP DPC start address > > + {0x5b01, 0x10}, // OTP DPC start address > > + {0x5b02, 0x03}, // OTP DPC end address > > + {0x5b03, 0xcf}, // OTP DPC end address > > + {0x5b05, 0x6c}, // recover method = 2b11, > > + {0x5e00, 0x00}, // use 0x3ff to test pattern off > > + {0x5e01, 0x41}, // window cut enable > > + {0x382d, 0x7f}, // > > + {0x4825, 0x3a}, // lpx_p_min > > + {0x4826, 0x40}, // hs_prepare_min > > + {0x4808, 0x25}, // wake up delay in 1/1024 s > > + {0x3763, 0x18}, // > > + {0x3768, 0xcc}, // > > + {0x470b, 0x28}, // > > + {0x4202, 0x00}, // > > + {0x400d, 0x10}, // BLC offset trigger L > > + {0x4040, 0x04}, // BLC gain th2 > > + {0x403e, 0x04}, // BLC gain th1 > > + {0x4041, 0xc6}, // BLC > > + {0x3007, 0x80}, > > + {0x400a, 0x01}, > > + {REG_NULL, 0x00}, > > +}; > > + > > +/* > > + * Xclk 24Mhz > > + * max_framerate 30fps > > + * mipi_datarate per lane 720Mbps > > + */ > > +static const struct regval ov8858_1632x1224_regs_2lane[] = { > > + // MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz. > > + // > > + // MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz. > > + // > > + // > > + // v00_01_00 (05/29/2014) : initial setting > > + // > > + // AM19 : 3617 <- 0xC0 > > + // > > + // AM20 : change FWC_6K_EN to be default 0x3618=0x5a > > + {0x0100, 0x00}, > > + {0x3501, 0x4d}, // exposure M > > + {0x3502, 0x40}, // exposure L > > + {0x3778, 0x17}, // > > + {0x3808, 0x06}, // x output size H > > + {0x3809, 0x60}, // x output size L > > + {0x380a, 0x04}, // y output size H > > + {0x380b, 0xc8}, // y output size L > > + {0x380c, 0x07}, // HTS H > > + {0x380d, 0x88}, // HTS L > > + {0x380e, 0x04}, // VTS H > > + {0x380f, 0xdc}, // VTS L > > + {0x3814, 0x03}, // x odd inc > > + {0x3821, 0x67}, // mirror on, bin on > > + {0x382a, 0x03}, // y odd inc > > + {0x3830, 0x08}, > > + {0x3836, 0x02}, > > + {0x3f0a, 0x00}, > > + {0x4001, 0x10}, // total 128 black column > > + {0x4022, 0x06}, // Anchor left end H > > + {0x4023, 0x00}, // Anchor left end L > > + {0x4025, 0x2a}, // Anchor right start L > > + {0x4027, 0x2b}, // Anchor right end L > > + {0x402b, 0x04}, // top black line number > > + {0x402f, 0x04}, // bottom black line number > > + {0x4500, 0x58}, > > + {0x4600, 0x00}, > > + {0x4601, 0xcb}, > > + {0x382d, 0x7f}, > > + {0x0100, 0x01}, > > + {REG_NULL, 0x00}, > > +}; > > + > > +/* > > + * Xclk 24Mhz > > + * max_framerate 15fps > > + * mipi_datarate per lane 720Mbps > > + */ > > +static const struct regval ov8858_3264x2448_regs_2lane[] = { > > + {0x0100, 0x00}, > > + {0x3501, 0x9a},// exposure M > > + {0x3502, 0x20},// exposure L > > + {0x3778, 0x1a},// > > + {0x3808, 0x0c},// x output size H > > + {0x3809, 0xc0},// x output size L > > + {0x380a, 0x09},// y output size H > > + {0x380b, 0x90},// y output size L > > + {0x380c, 0x07},// HTS H > > + {0x380d, 0x94},// HTS L > > + {0x380e, 0x09},// VTS H > > + {0x380f, 0xaa},// VTS L > > + {0x3814, 0x01},// x odd inc > > + {0x3821, 0x46},// mirror on, bin off > > + {0x382a, 0x01},// y odd inc > > + {0x3830, 0x06}, > > + {0x3836, 0x01}, > > + {0x3f0a, 0x00}, > > + {0x4001, 0x00},// total 256 black column > > + {0x4022, 0x0c},// Anchor left end H > > + {0x4023, 0x60},// Anchor left end L > > + {0x4025, 0x36},// Anchor right start L > > + {0x4027, 0x37},// Anchor right end L > > + {0x402b, 0x08},// top black line number > > + {0x402f, 0x08},// bottom black line number > > + {0x4500, 0x58}, > > + {0x4600, 0x01}, > > + {0x4601, 0x97}, > > + {0x382d, 0xff}, > > + {REG_NULL, 0x00}, > > +}; > > + > > +/* > > + * Xclk 24Mhz > > + */ > > +static const struct regval ov8858_global_regs_r2a_4lane[] = { > > Ah so there's 4 lanes mode support. Careful about the above mentioned > PIXEL_RATE calculation > > > > + // > > + // MIPI=720Mbps, SysClk=144Mhz,Dac Clock=360Mhz. > > + // > > + // v00_01_00 (05/29/2014) : initial setting > > + // > > + // AM19 : 3617 <- 0xC0 > > + // > > + // AM20 : change FWC_6K_EN to be default 0x3618=0x5a > > + {0x0103, 0x01}, // software reset for OVTATool only > > + {0x0103, 0x01}, // software reset > > + {0x0100, 0x00}, // software standby > > + {0x0302, 0x1e}, // pll1_multi > > + {0x0303, 0x00}, // pll1_divm > > + {0x0304, 0x03}, // pll1_div_mipi > > + {0x030e, 0x00}, // pll2_rdiv > > + {0x030f, 0x04}, // pll2_divsp > > + {0x0312, 0x01}, // pll2_pre_div0, pll2_r_divdac > > + {0x031e, 0x0c}, // pll1_no_lat > > + {0x3600, 0x00}, > > + {0x3601, 0x00}, > > + {0x3602, 0x00}, > > + {0x3603, 0x00}, > > + {0x3604, 0x22}, > > + {0x3605, 0x20}, > > + {0x3606, 0x00}, > > + {0x3607, 0x20}, > > + {0x3608, 0x11}, > > + {0x3609, 0x28}, > > + {0x360a, 0x00}, > > + {0x360b, 0x05}, > > + {0x360c, 0xd4}, > > + {0x360d, 0x40}, > > + {0x360e, 0x0c}, > > + {0x360f, 0x20}, > > + {0x3610, 0x07}, > > + {0x3611, 0x20}, > > + {0x3612, 0x88}, > > + {0x3613, 0x80}, > > + {0x3614, 0x58}, > > + {0x3615, 0x00}, > > + {0x3616, 0x4a}, > > + {0x3617, 0x90}, > > + {0x3618, 0x5a}, > > + {0x3619, 0x70}, > > + {0x361a, 0x99}, > > + {0x361b, 0x0a}, > > + {0x361c, 0x07}, > > + {0x361d, 0x00}, > > + {0x361e, 0x00}, > > + {0x361f, 0x00}, > > + {0x3638, 0xff}, > > + {0x3633, 0x0f}, > > + {0x3634, 0x0f}, > > + {0x3635, 0x0f}, > > + {0x3636, 0x12}, > > + {0x3645, 0x13}, > > + {0x3646, 0x83}, > > + {0x364a, 0x07}, > > + {0x3015, 0x01}, // > > + {0x3018, 0x72}, // MIPI 4 lane > > + {0x3020, 0x93}, // Clock switch output normal, pclk_div =/1 > > + {0x3022, 0x01}, // pd_mipi enable when rst_sync > > + {0x3031, 0x0a}, // MIPI 10-bit mode > > + {0x3034, 0x00}, // > > + {0x3106, 0x01}, // sclk_div, sclk_pre_div > > + {0x3305, 0xf1}, > > + {0x3308, 0x00}, > > + {0x3309, 0x28}, > > + {0x330a, 0x00}, > > + {0x330b, 0x20}, > > + {0x330c, 0x00}, > > + {0x330d, 0x00}, > > + {0x330e, 0x00}, > > + {0x330f, 0x40}, > > + {0x3307, 0x04}, > > + {0x3500, 0x00}, // exposure H > > + {0x3501, 0x4d}, // exposure M > > + {0x3502, 0x40}, // exposure L > > + {0x3503, 0x80}, // gain delay ?, exposure delay 1 frame, real gain > > + {0x3505, 0x80}, // gain option > > + {0x3508, 0x04}, // gain H > > + {0x3509, 0x00}, // gain L > > + {0x350c, 0x00}, // short gain H > > + {0x350d, 0x80}, // short gain L > > + {0x3510, 0x00}, // short exposure H > > + {0x3511, 0x02}, // short exposure M > > + {0x3512, 0x00}, // short exposure L > > + {0x3700, 0x30}, > > + {0x3701, 0x18}, > > + {0x3702, 0x50}, > > + {0x3703, 0x32}, > > + {0x3704, 0x28}, > > + {0x3705, 0x00}, > > + {0x3706, 0x82}, > > + {0x3707, 0x08}, > > + {0x3708, 0x48}, > > + {0x3709, 0x66}, > > + {0x370a, 0x01}, > > + {0x370b, 0x82}, > > + {0x370c, 0x07}, > > + {0x3718, 0x14}, > > + {0x3719, 0x31}, > > + {0x3712, 0x44}, > > + {0x3714, 0x24}, > > + {0x371e, 0x31}, > > + {0x371f, 0x7f}, > > + {0x3720, 0x0a}, > > + {0x3721, 0x0a}, > > + {0x3724, 0x0c}, > > + {0x3725, 0x02}, > > + {0x3726, 0x0c}, > > + {0x3728, 0x0a}, > > + {0x3729, 0x03}, > > + {0x372a, 0x06}, > > + {0x372b, 0xa6}, > > + {0x372c, 0xa6}, > > + {0x372d, 0xa6}, > > + {0x372e, 0x0c}, > > + {0x372f, 0x20}, > > + {0x3730, 0x02}, > > + {0x3731, 0x0c}, > > + {0x3732, 0x28}, > > + {0x3733, 0x10}, > > + {0x3734, 0x40}, > > + {0x3736, 0x30}, > > + {0x373a, 0x0a}, > > + {0x373b, 0x0b}, > > + {0x373c, 0x14}, > > + {0x373e, 0x06}, > > + {0x3750, 0x0a}, > > + {0x3751, 0x0e}, > > + {0x3755, 0x10}, > > + {0x3758, 0x00}, > > + {0x3759, 0x4c}, > > + {0x375a, 0x0c}, > > + {0x375b, 0x26}, > > + {0x375c, 0x20}, > > + {0x375d, 0x04}, > > + {0x375e, 0x00}, > > + {0x375f, 0x28}, > > + {0x3768, 0x22}, > > + {0x3769, 0x44}, > > + {0x376a, 0x44}, > > + {0x3761, 0x00}, > > + {0x3762, 0x00}, > > + {0x3763, 0x00}, > > + {0x3766, 0xff}, > > + {0x376b, 0x00}, > > + {0x3772, 0x46}, > > + {0x3773, 0x04}, > > + {0x3774, 0x2c}, > > + {0x3775, 0x13}, > > + {0x3776, 0x08}, > > + {0x3777, 0x00}, > > + {0x3778, 0x17}, > > + {0x37a0, 0x88}, > > + {0x37a1, 0x7a}, > > + {0x37a2, 0x7a}, > > + {0x37a3, 0x00}, > > + {0x37a4, 0x00}, > > + {0x37a5, 0x00}, > > + {0x37a6, 0x00}, > > + {0x37a7, 0x88}, > > + {0x37a8, 0x98}, > > + {0x37a9, 0x98}, > > + {0x3760, 0x00}, > > + {0x376f, 0x01}, > > + {0x37aa, 0x88}, > > + {0x37ab, 0x5c}, > > + {0x37ac, 0x5c}, > > + {0x37ad, 0x55}, > > + {0x37ae, 0x19}, > > + {0x37af, 0x19}, > > + {0x37b0, 0x00}, > > + {0x37b1, 0x00}, > > + {0x37b2, 0x00}, > > + {0x37b3, 0x84}, > > + {0x37b4, 0x84}, > > + {0x37b5, 0x60}, > > + {0x37b6, 0x00}, > > + {0x37b7, 0x00}, > > + {0x37b8, 0x00}, > > + {0x37b9, 0xff}, > > + {0x3800, 0x00}, // x start H > > + {0x3801, 0x0c}, // x start L > > + {0x3802, 0x00}, // y start H > > + {0x3803, 0x0c}, // y start L > > + {0x3804, 0x0c}, // x end H > > + {0x3805, 0xd3}, // x end L > > + {0x3806, 0x09}, // y end H > > + {0x3807, 0xa3}, // y end L > > + {0x3808, 0x06}, // x output size H > > + {0x3809, 0x60}, // x output size L > > + {0x380a, 0x04}, // y output size H > > + {0x380b, 0xc8}, // y output size L > > + {0x380c, 0x07}, // HTS H > > + {0x380d, 0x88}, // HTS L > > + {0x380e, 0x04}, // VTS H > > + {0x380f, 0xdc}, // VTS L > > + {0x3810, 0x00}, // ISP x win H > > + {0x3811, 0x04}, // ISP x win L > > + {0x3813, 0x02}, // ISP y win L > > + {0x3814, 0x03}, // x odd inc > > + {0x3815, 0x01}, // x even inc > > + {0x3820, 0x00}, // vflip off > > + {0x3821, 0x67}, // mirror on, bin o > > + {0x382a, 0x03}, // y odd inc > > + {0x382b, 0x01}, // y even inc > > + {0x3830, 0x08}, > > + {0x3836, 0x02}, > > + {0x3837, 0x18}, > > + {0x3841, 0xff}, // window auto size enable > > + {0x3846, 0x48}, // > > + {0x3d85, 0x16}, // OTP power up load data/setting enable enable > > + {0x3d8c, 0x73}, // OTP setting start High > > + {0x3d8d, 0xde}, // OTP setting start Low > > + {0x3f08, 0x10}, // > > + {0x3f0a, 0x00}, // > > + {0x4000, 0xf1}, // out_range/format_chg/gain/exp_chg trig enable > > + {0x4001, 0x10}, // total 128 black column > > + {0x4005, 0x10}, // BLC target L > > + {0x4002, 0x27}, // value used to limit BLC offset > > + {0x4009, 0x81}, // final BLC offset limitation enable > > + {0x400b, 0x0c}, // DCBLC on, DCBLC manual mode on > > + {0x401b, 0x00}, // zero line R coefficient > > + {0x401d, 0x00}, // zoro line T coefficient > > + {0x4020, 0x00}, // Anchor left start H > > + {0x4021, 0x04}, // Anchor left start L > > + {0x4022, 0x06}, // Anchor left end H > > + {0x4023, 0x00}, // Anchor left end L > > + {0x4024, 0x0f}, // Anchor right start H > > + {0x4025, 0x2a}, // Anchor right start L > > + {0x4026, 0x0f}, // Anchor right end H > > + {0x4027, 0x2b}, // Anchor right end L > > + {0x4028, 0x00}, // top zero line start > > + {0x4029, 0x02}, // top zero line number > > + {0x402a, 0x04}, // top black line start > > + {0x402b, 0x04}, // top black line number > > + {0x402c, 0x00}, // bottom zero line start > > + {0x402d, 0x02}, // bottom zoro line number > > + {0x402e, 0x04}, // bottom black line start > > + {0x402f, 0x04}, // bottom black line number > > + {0x401f, 0x00}, // interpolation x/y disable, Anchor one disable > > + {0x4034, 0x3f}, > > + {0x403d, 0x04}, // md_precision_en > > + {0x4300, 0xff}, // clip max H > > + {0x4301, 0x00}, // clip min H > > + {0x4302, 0x0f}, // clip min L, clip max L > > + {0x4316, 0x00}, > > + {0x4500, 0x58}, > > + {0x4503, 0x18}, > > + {0x4600, 0x00}, > > + {0x4601, 0xcb}, > > + {0x481f, 0x32}, // clk prepare min > > + {0x4837, 0x16}, // global timing > > + {0x4850, 0x10}, // lane 1 = 1, lane 0 = 0 > > + {0x4851, 0x32}, // lane 3 = 3, lane 2 = 2 > > + {0x4b00, 0x2a}, > > + {0x4b0d, 0x00}, > > + {0x4d00, 0x04}, // temperature sensor > > + {0x4d01, 0x18}, // > > + {0x4d02, 0xc3}, // > > + {0x4d03, 0xff}, // > > + {0x4d04, 0xff}, // > > + {0x4d05, 0xff}, // temperature sensor > > + {0x5000, 0xfe}, // lenc on, slave/master AWB gain/statistics enable > > + {0x5001, 0x01}, // BLC on > > + {0x5002, 0x08}, // WBMATCH sensor's gain, H scale/WBMATCH/OTP_DPC off > > + {0x5003, 0x20}, // DPC_DBC buffer control enable, WB > > + {0x501e, 0x93}, // enable digital gain > > + {0x5046, 0x12}, // > > + {0x5780, 0x3e}, // DPC > > + {0x5781, 0x0f}, // > > + {0x5782, 0x44}, // > > + {0x5783, 0x02}, // > > + {0x5784, 0x01}, // > > + {0x5785, 0x00}, // > > + {0x5786, 0x00}, // > > + {0x5787, 0x04}, // > > + {0x5788, 0x02}, // > > + {0x5789, 0x0f}, // > > + {0x578a, 0xfd}, // > > + {0x578b, 0xf5}, // > > + {0x578c, 0xf5}, // > > + {0x578d, 0x03}, // > > + {0x578e, 0x08}, // > > + {0x578f, 0x0c}, // > > + {0x5790, 0x08}, // > > + {0x5791, 0x04}, // > > + {0x5792, 0x00}, // > > + {0x5793, 0x52}, // > > + {0x5794, 0xa3}, // DPC > > + {0x5871, 0x0d}, // Lenc > > + {0x5870, 0x18}, // > > + {0x586e, 0x10}, // > > + {0x586f, 0x08}, // > > + {0x58f7, 0x01}, // > > + {0x58f8, 0x3d}, // Lenc > > + {0x5901, 0x00}, // H skip off, V skip off > > + {0x5b00, 0x02}, // OTP DPC start address > > + {0x5b01, 0x10}, // OTP DPC start address > > + {0x5b02, 0x03}, // OTP DPC end address > > + {0x5b03, 0xcf}, // OTP DPC end address > > + {0x5b05, 0x6c}, // recover method = 2b11 > > + {0x5e00, 0x00}, // use 0x3ff to test pattern off > > + {0x5e01, 0x41}, // window cut enable > > + {0x382d, 0x7f}, // > > + {0x4825, 0x3a}, // lpx_p_min > > + {0x4826, 0x40}, // hs_prepare_min > > + {0x4808, 0x25}, // wake up delay in 1/1024 s > > + {0x3763, 0x18}, > > + {0x3768, 0xcc}, > > + {0x470b, 0x28}, > > + {0x4202, 0x00}, > > + {0x400d, 0x10}, // BLC offset trigger L > > + {0x4040, 0x04}, // BLC gain th2 > > + {0x403e, 0x04}, // BLC gain th1 > > + {0x4041, 0xc6}, // BLC > > + {0x3007, 0x80}, > > + {0x400a, 0x01}, > > + {REG_NULL, 0x00}, > > +}; > > + > > +/* > > + * Xclk 24Mhz > > + * max_framerate 30fps > > + * mipi_datarate per lane 720Mbps > > + */ > > +static const struct regval ov8858_3264x2448_regs_4lane[] = { > > It would be ideal to compare the tables from the 2 lanes and 4 lanes > version as I presume they only change in the part that sets up the > lane number, possibily the PLL calculation and a few other things. > > The parts common to the mode (resolution etc) should be factored out > and only the lane-specific parts should be kept separate. > > Quite an invasive change, and I guess we can live with the current > implementation for a first submission. > > > + {0x0100, 0x00}, > > + {0x3501, 0x9a}, // exposure M > > + {0x3502, 0x20}, // exposure L > > + {0x3508, 0x02}, // gain H > > This register changes between 3264x2448_2 lanes, which also set the > undocumented 0x3778 register > > > + {0x3808, 0x0c}, // x output size H > > + {0x3809, 0xc0}, // x output size L > > + {0x380a, 0x09}, // y output size H > > + {0x380b, 0x90}, // y output size L > > + {0x380c, 0x07}, // HTS H > > + {0x380d, 0x94}, // HTS L > > + {0x380e, 0x09}, // VTS H > > + {0x380f, 0xaa}, // VTS L > > + {0x3814, 0x01}, // x odd inc > > + {0x3821, 0x46}, // mirror on, bin off > > + {0x382a, 0x01}, // y odd inc > > + {0x3830, 0x06}, > > + {0x3836, 0x01}, > > + {0x3f0a, 0x00}, > > + {0x4001, 0x00}, // total 256 black column > > + {0x4022, 0x0c}, // Anchor left end H > > + {0x4023, 0x60}, // Anchor left end L > > + {0x4025, 0x36}, // Anchor right start L > > + {0x4027, 0x37}, // Anchor right end L > > + {0x402b, 0x08}, // top black line number > > + {0x402f, 0x08}, // interpolation x/y disable, Anchor one disable > > + {0x4500, 0x58}, > > + {0x4600, 0x01}, > > + {0x4601, 0x97}, > > + {0x382d, 0xff}, > > All of these are equal between the two modes and could be factored out > eventually. > > > + {REG_NULL, 0x00}, > > +}; > > + > > +static const struct ov8858_mode supported_modes_2lane[] = { > > + { > > + .width = 3264, > > + .height = 2448, > > + .max_fps = { > > + .numerator = 10000, > > + .denominator = 150000, > > + }, > > + .exp_def = 0x09a0, > > + .hts_def = 0x0794 * 2, > > + .vts_def = 0x09aa, > > + .reg_list = ov8858_3264x2448_regs_2lane, > > + }, > > + { > > + .width = 1632, > > + .height = 1224, > > + .max_fps = { > > + .numerator = 10000, > > + .denominator = 300000, > > + }, > > + .exp_def = 0x04d0, > > + .hts_def = 0x0788, > > Is this missing a * 2 ? > > All other modes have the HTS default value size multipled by 2 here, > which seems to suggest the HTS register should be programmed with half > the number of of pixels in a line. > > The value reported in the the 3264x2448 2 lanes mode seems to confirm this as > the numbers match the reported FPS > > 0x794 * 2 * 0x9aa / OV8858_PIXEL_RATE = 0,066 msec = 15 FPS > > For this mode instead > > 0x788 * 0x04dc / OV8858_PIXEL_RATE = 0,016 msec = 60 FSP > > Which seems to be two times the reported 30FPS rate. > > As hts_def is used to populate the CID_HBLANK control and userspace > will use it to calculate the frame duration, I think the above value > should be multiplied by 2 as well ? The reister values seems fine.. > > Could you check how many FPS do you get with this mode, if it works ? > > > + .vts_def = 0x04dc, > > + .reg_list = ov8858_1632x1224_regs_2lane, > > + }, > > +}; > > + > > +static const struct ov8858_mode supported_modes_4lane[] = { > > + { > > + .width = 3264, > > + .height = 2448, > > + .max_fps = { > > + .numerator = 10000, > > + .denominator = 300000, > > + }, > > + .exp_def = 0x09a0, > > + .hts_def = 0x0794 * 2, > > + .vts_def = 0x09aa, > > + .reg_list = ov8858_3264x2448_regs_4lane, > > + }, > > +}; > > Give how small are the differences between the full res 2 lanes and 4 > lanes mode I would try to move the two register differences in the > general 2_lanes and 4_lanes register blobs and remove > supported_modes_4lane[] > > > + > > +static const struct ov8858_mode *supported_modes; > > So that you can remove this one as well > > > + > > +static const s64 link_freq_menu_items[] = { > > + MIPI_FREQ > > +}; > > + > > +static const char * const ov8858_test_pattern_menu[] = { > > + "Disabled", > > + "Vertical Color Bar Type 1", > > + "Vertical Color Bar Type 2", > > + "Vertical Color Bar Type 3", > > + "Vertical Color Bar Type 4" > > +}; > > + > > +/* Write registers up to 4 at a time */ > > +static int ov8858_write_reg(struct i2c_client *client, u16 reg, > > + u32 len, u32 val) > > +{ > > + u32 buf_i, val_i; > > + u8 buf[6]; > > + u8 *val_p; > > + __be32 val_be; > > + > > + if (len > 4) > > + return -EINVAL; > > + > > + buf[0] = reg >> 8; > > + buf[1] = reg & 0xff; > > + > > + val_be = cpu_to_be32(val); > > + val_p = (u8 *)&val_be; > > + buf_i = 2; > > + val_i = 4 - len; > > + > > + while (val_i < 4) > > + buf[buf_i++] = val_p[val_i++]; > > + > > + if (i2c_master_send(client, buf, len + 2) != len + 2) > > + return -EIO; > > + > > + return 0; > > +} > > + > > +static int ov8858_write_array(struct i2c_client *client, > > + const struct regval *regs) > > +{ > > + u32 i; > > + int ret = 0; > > + > > + for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) > > + ret = ov8858_write_reg(client, regs[i].addr, > > + OV8858_REG_VALUE_08BIT, > > + regs[i].val); > > + > > + return ret; > > +} > > + > > +/* Read registers up to 4 at a time */ > > +static int ov8858_read_reg(struct i2c_client *client, u16 reg, > > + unsigned int len, u32 *val) > > +{ > > + struct i2c_msg msgs[2]; > > + u8 *data_be_p; > > + __be32 data_be = 0; > > + __be16 reg_addr_be = cpu_to_be16(reg); > > + int ret; > > + > > + if (len > 4 || !len) > > + return -EINVAL; > > + > > + data_be_p = (u8 *)&data_be; > > + /* Write register address */ > > + msgs[0].addr = client->addr; > > + msgs[0].flags = 0; > > + msgs[0].len = 2; > > + msgs[0].buf = (u8 *)®_addr_be; > > + > > + /* Read data from register */ > > + msgs[1].addr = client->addr; > > + msgs[1].flags = I2C_M_RD; > > + msgs[1].len = len; > > + msgs[1].buf = &data_be_p[4 - len]; > > + > > + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); > > + if (ret != ARRAY_SIZE(msgs)) > > + return -EIO; > > + > > + *val = be32_to_cpu(data_be); > > + > > + return 0; > > +} > > + > > +static int ov8858_get_reso_dist(const struct ov8858_mode *mode, > > + struct v4l2_mbus_framefmt *framefmt) > > +{ > > + return abs(mode->width - framefmt->width) + > > + abs(mode->height - framefmt->height); > > +} > > + > > +static const struct ov8858_mode * > > +ov8858_find_best_fit(struct ov8858 *ov8858, > > + struct v4l2_subdev_format *fmt) > > v4l2 has v4l2_find_nearest_size(). > It would be nice to see if it can be used to reduce the amount of > driver-specific code > > > +{ > > + struct v4l2_mbus_framefmt *framefmt = &fmt->format; > > + int dist; > > + int cur_best_fit = 0; > > + int cur_best_fit_dist = -1; > > + unsigned int i; > > + > > + for (i = 0; i < ov8858->cfg_num; i++) { > > + dist = ov8858_get_reso_dist(&supported_modes[i], framefmt); > > + if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) { > > + cur_best_fit_dist = dist; > > + cur_best_fit = i; > > + } > > + } > > + > > + return &supported_modes[cur_best_fit]; > > +} > > + > > +static int ov8858_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + const struct ov8858_mode *mode; > > + s64 h_blank, vblank_def; > > + > > + mutex_lock(&ov8858->mutex); > > + > > + mode = ov8858_find_best_fit(ov8858, fmt); > > + fmt->format.code = OV8858_MEDIA_BUS_FMT; > > As there's a single mbus code supported, I would use it directly and > remove the #define > > > + fmt->format.width = mode->width; > > + fmt->format.height = mode->height; > > + fmt->format.field = V4L2_FIELD_NONE; > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > > + *v4l2_subdev_get_try_format(sd, state, fmt->pad) = fmt->format; > > Nit: > mutex_unlock(&ov8858->mutex); > return 0; > } > > And you can remove else {} and reduce indentation > > > + } else { > > + ov8858->cur_mode = mode; > > + h_blank = mode->hts_def - mode->width; > > + __v4l2_ctrl_modify_range(ov8858->hblank, h_blank, > > + h_blank, 1, h_blank); > > + vblank_def = mode->vts_def - mode->height; > > + __v4l2_ctrl_modify_range(ov8858->vblank, vblank_def, > > + OV8858_VTS_MAX - mode->height, > > + 1, vblank_def); > > + } > > + > > + mutex_unlock(&ov8858->mutex); > > + > > + return 0; > > +} > > + > > +static int ov8858_get_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + const struct ov8858_mode *mode = ov8858->cur_mode; > > + > > + mutex_lock(&ov8858->mutex); > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > > + fmt->format = *v4l2_subdev_get_try_format(sd, state, fmt->pad); > > same here > > > + } else { > > + fmt->format.width = mode->width; > > + fmt->format.height = mode->height; > > + fmt->format.code = OV8858_MEDIA_BUS_FMT; > > + fmt->format.field = V4L2_FIELD_NONE; > > + } > > + mutex_unlock(&ov8858->mutex); > > + > > + return 0; > > +} > > + > > +static int ov8858_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + if (code->index != 0) > > + return -EINVAL; > > + code->code = OV8858_MEDIA_BUS_FMT; > > + > > + return 0; > > +} > > + > > +static int ov8858_enum_frame_sizes(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + struct v4l2_subdev_frame_size_enum *fse) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + > > + if (fse->index >= ov8858->cfg_num) > > + return -EINVAL; > > + > > + if (fse->code != OV8858_MEDIA_BUS_FMT) > > + return -EINVAL; > > + > > + fse->min_width = supported_modes[fse->index].width; > > + fse->max_width = supported_modes[fse->index].width; > > + fse->max_height = supported_modes[fse->index].height; > > + fse->min_height = supported_modes[fse->index].height; > > + > > + return 0; > > +} > > + > > +static int ov8858_enable_test_pattern(struct ov8858 *ov8858, u32 pattern) > > +{ > > + u32 val; > > + > > + if (pattern) > > + val = (pattern - 1) | OV8858_TEST_PATTERN_ENABLE; > > + else > > + val = OV8858_TEST_PATTERN_DISABLE; > > + > > + return ov8858_write_reg(ov8858->client, > > + OV8858_REG_TEST_PATTERN, > > + OV8858_REG_VALUE_08BIT, > > + val); > > +} > > + > > +static int ov8858_g_frame_interval(struct v4l2_subdev *sd, > > + struct v4l2_subdev_frame_interval *fi) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + const struct ov8858_mode *mode = ov8858->cur_mode; > > + > > + mutex_lock(&ov8858->mutex); > > + fi->interval = mode->max_fps; > > + mutex_unlock(&ov8858->mutex); > > + > > + return 0; > > +} > > s/g_frame_interval() are deprecated. Frame duration should be > configured using blankings. > > > + > > +static int __ov8858_start_stream(struct ov8858 *ov8858) > > +{ > > + int ret; > > + > > + ret = ov8858_write_array(ov8858->client, ov8858_global_regs); > > + if (ret) > > + return ret; > > + > > + ret = ov8858_write_array(ov8858->client, ov8858->cur_mode->reg_list); > > + if (ret) > > + return ret; > > + > > + /* In case these controls are set before streaming */ > > + mutex_unlock(&ov8858->mutex); > > + ret = v4l2_ctrl_handler_setup(&ov8858->ctrl_handler); > > + mutex_lock(&ov8858->mutex); > > Maybe the unlocked __v42l_ctrl_handler_setup() version would prevent > this unlock/lock sequence > > > + if (ret) > > + return ret; > > + > > + return ov8858_write_reg(ov8858->client, > > + OV8858_REG_CTRL_MODE, > > + OV8858_REG_VALUE_08BIT, > > + OV8858_MODE_STREAMING); > > +} > > + > > +static int __ov8858_stop_stream(struct ov8858 *ov8858) > > +{ > > + return ov8858_write_reg(ov8858->client, > > + OV8858_REG_CTRL_MODE, > > + OV8858_REG_VALUE_08BIT, > > + OV8858_MODE_SW_STANDBY); > > +} > > + > > +static int ov8858_s_stream(struct v4l2_subdev *sd, int on) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + struct i2c_client *client = ov8858->client; > > + int ret = 0; > > + > > + mutex_lock(&ov8858->mutex); > > + on = !!on; > > + if (on == ov8858->streaming) > > + goto unlock_and_return; > > + > > + if (on) { > > + ret = pm_runtime_get_sync(&client->dev); > > pm_runtime_resume_and_get() should be used to avoid decresing the pm > usage count in case of errors > > See as an example > a959a7bf3b93 ("media: i2c: video-i2c: use pm_runtime_resume_and_get()") > > > + if (ret < 0) { > > + pm_runtime_put_noidle(&client->dev); > > + goto unlock_and_return; > > + } > > + > > + ret = __ov8858_start_stream(ov8858); > > + if (ret) { > > + v4l2_err(sd, "start stream failed while write regs\n"); > > Please move to use dev_dbg/dev_err as AFAIK v4l2_dbg/v4l2_err are > deprecated > > > + pm_runtime_put(&client->dev); > > + goto unlock_and_return; > > + } > > + } else { > > + __ov8858_stop_stream(ov8858); > > + pm_runtime_put(&client->dev); > > + } > > + > > + ov8858->streaming = on; > > + > > +unlock_and_return: > > + mutex_unlock(&ov8858->mutex); > > + > > + return ret; > > +} > > + > > +/* Calculate the delay in us by clock rate and clock cycles */ > > +static inline u32 ov8858_cal_delay(u32 cycles) > > +{ > > + return DIV_ROUND_UP(cycles, OV8858_XVCLK_FREQ / 1000 / 1000); > > +} > > + > > +static int __ov8858_power_on(struct ov8858 *ov8858) > > +{ > > + int ret; > > + u32 delay_us; > > + struct device *dev = &ov8858->client->dev; > > + > > + if (!IS_ERR_OR_NULL(ov8858->pins_default)) { > > As far as I can see pins_default is never set and should probably not > be here as pinmuxing should be handled by device tree. Please drop > this part. > > > + ret = pinctrl_select_state(ov8858->pinctrl, > > + ov8858->pins_default); > > + if (ret < 0) > > + dev_err(dev, "could not set pins\n"); > > + } > > + > > + ret = clk_set_rate(ov8858->xvclk, OV8858_XVCLK_FREQ); > > + if (ret < 0) > > + dev_warn(dev, "Failed to set xvclk rate (24MHz)\n"); > > + if (clk_get_rate(ov8858->xvclk) != OV8858_XVCLK_FREQ) > > + dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n"); > > + > > + ret = clk_prepare_enable(ov8858->xvclk); > > + if (ret < 0) { > > + dev_err(dev, "Failed to enable xvclk\n"); > > + return ret; > > + } > > + > > + ret = regulator_bulk_enable(OV8858_NUM_SUPPLIES, ov8858->supplies); > > + if (ret < 0) { > > + dev_err(dev, "Failed to enable regulators\n"); > > + goto disable_clk; > > + } > > + > > + mdelay(20); > > That's a large delay! > Unfortunately the timing constrains in "table 2-4 > power up sequence timing constraints" for the power-on/standby timings > are not characterized. > > There's however a fixed 10msec delay before streaming start that > should probably be considered > > + > > + gpiod_set_value_cansleep(ov8858->reset_gpio, 0); > > + gpiod_set_value_cansleep(ov8858->pwdn_gpio, 0); > > + > > + /* 8192 cycles prior to first SCCB transaction */ > > + //delay_us = ov8858_cal_delay(8192); > > + //usleep_range(delay_us, delay_us * 2); > > This is characterized in the datasheet as 8192 clk pulses between the > reset exit and the first SCCB transaction. > > > + mdelay(10); > > Could this be removed and the actual delay be used instead ? > > > + > > + return 0; > > + > > +disable_clk: > > + clk_disable_unprepare(ov8858->xvclk); > > + > > + return ret; > > +} > > + > > +static void __ov8858_power_off(struct ov8858 *ov8858) > > +{ > > + int ret; > > + struct device *dev = &ov8858->client->dev; > > + > > + gpiod_set_value_cansleep(ov8858->pwdn_gpio, 1); > > + clk_disable_unprepare(ov8858->xvclk); > > + gpiod_set_value_cansleep(ov8858->reset_gpio, 1); > > + > > + if (!IS_ERR_OR_NULL(ov8858->pins_sleep)) { > > + ret = pinctrl_select_state(ov8858->pinctrl, > > + ov8858->pins_sleep); > > + if (ret < 0) > > + dev_dbg(dev, "could not set pins\n"); > > + } > > Please drop for the above mentioned reason > > > + > > + regulator_bulk_disable(OV8858_NUM_SUPPLIES, ov8858->supplies); > > +} > > + > > +static int ov8858_runtime_resume(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + > > + return __ov8858_power_on(ov8858); > > +} > > + > > +static int ov8858_runtime_suspend(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + > > + __ov8858_power_off(ov8858); > > + > > + return 0; > > +} > > + > > +static int ov8858_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + struct v4l2_mbus_framefmt *try_fmt = > > + v4l2_subdev_get_try_format(sd, fh->state, 0); > > + const struct ov8858_mode *def_mode = &supported_modes[0]; > > + > > + mutex_lock(&ov8858->mutex); > > + /* Initialize try_fmt */ > > + try_fmt->width = def_mode->width; > > + try_fmt->height = def_mode->height; > > + try_fmt->code = OV8858_MEDIA_BUS_FMT; > > + try_fmt->field = V4L2_FIELD_NONE; > > + > > + mutex_unlock(&ov8858->mutex); > > + /* No crop or compose */ > > They should probably be added, but I'm fine doing it on top > > > + > > + return 0; > > +} > > + > > +static int ov8858_enum_frame_interval(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + struct v4l2_subdev_frame_interval_enum *fie) > > +{ > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + > > + if (fie->index >= ov8858->cfg_num) > > + return -EINVAL; > > + > > + if (fie->code != OV8858_MEDIA_BUS_FMT) > > + return -EINVAL; > > + > > + fie->width = supported_modes[fie->index].width; > > + fie->height = supported_modes[fie->index].height; > > + fie->interval = supported_modes[fie->index].max_fps; > > + return 0; > > +} > > Let alone the function definition is a bit out of place, as callbacks > for the subdev operations are above defined, but I would drop this for > the reasons explained in s/g_frame_interval > > > + > > +static const struct dev_pm_ops ov8858_pm_ops = { > > + SET_RUNTIME_PM_OPS(ov8858_runtime_suspend, > > + ov8858_runtime_resume, NULL) > > +}; > > + > > +static const struct v4l2_subdev_internal_ops ov8858_internal_ops = { > > + .open = ov8858_open, > > +}; > > + > > +static const struct v4l2_subdev_video_ops ov8858_video_ops = { > > + .s_stream = ov8858_s_stream, > > + .g_frame_interval = ov8858_g_frame_interval, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops ov8858_pad_ops = { > > + .enum_mbus_code = ov8858_enum_mbus_code, > > + .enum_frame_size = ov8858_enum_frame_sizes, > > + .enum_frame_interval = ov8858_enum_frame_interval, > > + .get_fmt = ov8858_get_fmt, > > + .set_fmt = ov8858_set_fmt, > > +}; > > + > > +static const struct v4l2_subdev_ops ov8858_subdev_ops = { > > + .video = &ov8858_video_ops, > > + .pad = &ov8858_pad_ops, > > +}; > > + > > +static int ov8858_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct ov8858 *ov8858 = container_of(ctrl->handler, > > + struct ov8858, ctrl_handler); > > + struct i2c_client *client = ov8858->client; > > + s64 max; > > + int ret = 0; > > No need to initialize > > > + > > + /* Propagate change of current control to all related controls */ > > + switch (ctrl->id) { > > + case V4L2_CID_VBLANK: > > + /* Update max exposure while meeting expected vblanking */ > > + max = ov8858->cur_mode->height + ctrl->val - 4; > > + __v4l2_ctrl_modify_range(ov8858->exposure, > > + ov8858->exposure->minimum, max, > > + ov8858->exposure->step, > > + ov8858->exposure->default_value); > > + break; > > + } > > + > > + if (pm_runtime_get(&client->dev) <= 0) > > + return 0; > > Please do not power up the device when a control is set. > > You should here use > > if (!pm_runtime_get_if_in_use(&client->dev)) > return 0; > > The controls values are retained by the v4l2 core, and you will call > __v4l2_ctrl_handler_setup() at s_stream() time when the device has > already been powered up and you'll setup controls just before starting > the streaming. > > > + > > + switch (ctrl->id) { > > + case V4L2_CID_EXPOSURE: > > + /* 4 least significant bits of expsoure are fractional part */ > > + ret = ov8858_write_reg(ov8858->client, > > + OV8858_REG_EXPOSURE, > > + OV8858_REG_VALUE_24BIT, > > + ctrl->val << 4); > > + break; > > + case V4L2_CID_ANALOGUE_GAIN: > > + ret = ov8858_write_reg(ov8858->client, > > + OV8858_REG_GAIN_H, > > + OV8858_REG_VALUE_08BIT, > > + (ctrl->val >> OV8858_GAIN_H_SHIFT) & > > + OV8858_GAIN_H_MASK); > > + ret |= ov8858_write_reg(ov8858->client, > > + OV8858_REG_GAIN_L, > > + OV8858_REG_VALUE_08BIT, > > + ctrl->val & OV8858_GAIN_L_MASK); > > + break; > > + case V4L2_CID_DIGITAL_GAIN: > > + ret = ov8858_write_reg(ov8858->client, > > + OV8858_REG_DGAIN_H, > > + OV8858_REG_VALUE_08BIT, > > + (ctrl->val >> OV8858_DGAIN_H_SHIFT) & > > + OV8858_DGAIN_H_MASK); > > + ret |= ov8858_write_reg(ov8858->client, > > + OV8858_REG_DGAIN_L, > > + OV8858_REG_VALUE_08BIT, > > + ctrl->val & OV8858_DGAIN_L_MASK); > > + break; > > + case V4L2_CID_VBLANK: > > + ret = ov8858_write_reg(ov8858->client, > > + OV8858_REG_VTS, > > + OV8858_REG_VALUE_16BIT, > > + ctrl->val + ov8858->cur_mode->height); > > + break; > > + case V4L2_CID_TEST_PATTERN: > > + ret = ov8858_enable_test_pattern(ov8858, ctrl->val); > > + break; > > + default: > > ret = -EINVAL; > > > + dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n", > > + __func__, ctrl->id, ctrl->val); > > + break; > > + } > > + > > + pm_runtime_put(&client->dev); > > + > > + return ret; > > +} > > + > > +static const struct v4l2_ctrl_ops ov8858_ctrl_ops = { > > + .s_ctrl = ov8858_set_ctrl, > > +}; > > + > > +static int ov8858_initialize_controls(struct ov8858 *ov8858) > > +{ > > + const struct ov8858_mode *mode; > > + struct v4l2_ctrl_handler *handler; > > + struct v4l2_ctrl *ctrl; > > + s64 exposure_max, vblank_def; > > + u32 h_blank; > > + int ret; > > + > > + handler = &ov8858->ctrl_handler; > > + mode = ov8858->cur_mode; > > + ret = v4l2_ctrl_handler_init(handler, 8); > > + if (ret) > > + return ret; > > + handler->lock = &ov8858->mutex; > > + > > + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, > > + 0, 0, link_freq_menu_items); > > + if (ctrl) > > + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, > > + 0, ov8858->pixel_rate, 1, ov8858->pixel_rate); > > + > > + h_blank = mode->hts_def - mode->width; > > + ov8858->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, > > + h_blank, h_blank, 1, h_blank); > > + if (ov8858->hblank) > > + ov8858->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + vblank_def = mode->vts_def - mode->height; > > + ov8858->vblank = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, > > + V4L2_CID_VBLANK, vblank_def, > > + OV8858_VTS_MAX - mode->height, > > + 1, vblank_def); > > + > > + exposure_max = mode->vts_def - 4; > > + ov8858->exposure = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, > > + V4L2_CID_EXPOSURE, OV8858_EXPOSURE_MIN, > > + exposure_max, OV8858_EXPOSURE_STEP, > > + mode->exp_def); > > + > > + ov8858->anal_gain = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, > > + V4L2_CID_ANALOGUE_GAIN, OV8858_GAIN_MIN, > > + OV8858_GAIN_MAX, OV8858_GAIN_STEP, > > + OV8858_GAIN_DEFAULT); > > + > > + ov8858->digi_gain = v4l2_ctrl_new_std(handler, &ov8858_ctrl_ops, > > + V4L2_CID_DIGITAL_GAIN, OV8858_DGAIN_MIN, > > + OV8858_DGAIN_MAX, OV8858_DGAIN_STEP, > > + OV8858_DGAIN_DEFAULT); > > + > > + ov8858->test_pattern = v4l2_ctrl_new_std_menu_items(handler, > > + &ov8858_ctrl_ops, V4L2_CID_TEST_PATTERN, > > + ARRAY_SIZE(ov8858_test_pattern_menu) - 1, > > + 0, 0, ov8858_test_pattern_menu); > > + > > + if (handler->error) { > > + ret = handler->error; > > + dev_err(&ov8858->client->dev, > > + "Failed to init controls(%d)\n", ret); > > + goto err_free_handler; > > + } > > + > > + ov8858->subdev.ctrl_handler = handler; > > + > > + return 0; > > + > > +err_free_handler: > > + v4l2_ctrl_handler_free(handler); > > + > > + return ret; > > +} > > + > > +static int ov8858_check_sensor_id(struct ov8858 *ov8858, > > + struct i2c_client *client) > > +{ > > + struct device *dev = &ov8858->client->dev; > > + u32 id = 0; > > + int ret; > > + > > + ret = ov8858_read_reg(client, OV8858_REG_CHIP_ID, > > + OV8858_REG_VALUE_24BIT, &id); > > + if (id != CHIP_ID) { > > + dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret); > > + return ret; > > + } > > + > > + ret = ov8858_read_reg(client, OV8858_CHIP_REVISION_REG, > > + OV8858_REG_VALUE_08BIT, &id); > > + if (ret) { > > + dev_err(dev, "Read chip revision register error\n"); > > + return ret; > > + } > > + > > + dev_info(dev, "Detected OV%06x sensor, REVISION 0x%x\n", CHIP_ID, id); > > + > > + if (id == OV8858_R2A) { > > + if (4 == ov8858->lane_num) { > > + ov8858_global_regs = ov8858_global_regs_r2a_4lane; > > + } else { > > + ov8858_global_regs = ov8858_global_regs_r2a_2lane; > > + } > > + > > + ov8858->is_r2a = true; > > is_r2a is never used > > > + } else { > > + ov8858_global_regs = ov8858_global_regs_r1a; > > + ov8858->is_r2a = false; > > + dev_warn(dev, "R1A may not work well current!\n"); > > Ouch, do we even want it in this driver then ? > > > + } > > + > > + return 0; > > +} > > + > > +static int ov8858_configure_regulators(struct ov8858 *ov8858) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < OV8858_NUM_SUPPLIES; i++) > > + ov8858->supplies[i].supply = ov8858_supply_names[i]; > > + > > + return devm_regulator_bulk_get(&ov8858->client->dev, > > + OV8858_NUM_SUPPLIES, > > + ov8858->supplies); > > +} > > + > > +static int ov8858_parse_of(struct ov8858 *ov8858) > > +{ > > + struct device *dev = &ov8858->client->dev; > > + struct device_node *endpoint; > > + struct fwnode_handle *fwnode; > > + int rval; > > + > > + endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); > > + if (!endpoint) { > > + dev_err(dev, "Failed to get endpoint\n"); > > + return -EINVAL; > > + } > > + > > + fwnode = of_fwnode_handle(endpoint); > > + rval = fwnode_property_read_u32_array(fwnode, "data-lanes", NULL, 0); > > Please use > > v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), &vep) > > With > struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_CSI2_DPHY }; > > and use: > num_lanes = vep.bus.mipi_csi2.num_data_lanes; > > to know the number of lanes using standard kAPIs > > Also > of_node_put(endpoint); > after v4l2_fwnode_endpoint_parse() to balance the above get. > > Many examples are available in drivers/media/i2c/ > > > > + if (rval <= 0) { > > + dev_warn(dev, " Get mipi lane num failed!\n"); > > + return -1; > > + } > > + > > + ov8858->lane_num = rval; > > + if (4 == ov8858->lane_num) { > > + ov8858->cur_mode = &supported_modes_4lane[0]; > > + supported_modes = supported_modes_4lane; > > + ov8858->cfg_num = ARRAY_SIZE(supported_modes_4lane); > > + > > + /* pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */ > > + ov8858->pixel_rate = MIPI_FREQ * 2U * ov8858->lane_num / 10U; > > Ah ok, OV8858_PIXEL_RATE is adjusted. The number of lanes could be > made a macro parameter then > > > + dev_info(dev, "lane_num(%d) pixel_rate(%u)\n", > > + ov8858->lane_num, ov8858->pixel_rate); > > dev_dbg please > > > + } else { > > "else" could very well be 1 or even 3 I guess. > > Please make sure the number of lanes is 2 or 4 if that's what your > driver supports. > > > + ov8858->cur_mode = &supported_modes_2lane[0]; > > + supported_modes = supported_modes_2lane; > > + ov8858->cfg_num = ARRAY_SIZE(supported_modes_2lane); > > + > > + /*pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */ > > + ov8858->pixel_rate = MIPI_FREQ * 2U * (ov8858->lane_num) / 10U; > > Ah ok, OV8858_PIXEL_RATE is not even used here. > > Please drop it then or make it accept the number of lanes as parameter > > > + dev_info(dev, "lane_num(%d) pixel_rate(%u)\n", > > ditto > > > + ov8858->lane_num, ov8858->pixel_rate); > > + } > > + return 0; > > +} > > + > > +static int ov8858_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > Please use .probe_new so you can remove const struct i2c_device_id > *id > > > +{ > > + struct device *dev = &client->dev; > > + struct device_node *node = dev->of_node; > > + struct ov8858 *ov8858; > > + struct v4l2_subdev *sd; > > + int ret; > > + > > + ov8858 = devm_kzalloc(dev, sizeof(*ov8858), GFP_KERNEL); > > + if (!ov8858) > > + return -ENOMEM; > > + > > + ov8858->client = client; > > + > > + ov8858->xvclk = devm_clk_get(dev, "xvclk"); > > + if (IS_ERR(ov8858->xvclk)) > > + return dev_err_probe(dev, PTR_ERR(ov8858->xvclk), > > + "Failed to get xvclk\n"); > > + > > + ov8858->reset_gpio = devm_gpiod_get_optional(dev, "reset", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(ov8858->reset_gpio)) > > + return dev_err_probe(dev, PTR_ERR(ov8858->reset_gpio), > > + "Failed to get reset gpio\n"); > > + > > + ov8858->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(ov8858->pwdn_gpio)) > > + return dev_err_probe(dev, PTR_ERR(ov8858->pwdn_gpio), > > + "Failed to get powerdown gpio\n"); > > + > > + ret = ov8858_configure_regulators(ov8858); > > + if (ret) > > + return dev_err_probe(dev, ret, > > + "Failed to get power regulators\n"); > > + > > + ret = ov8858_parse_of(ov8858); > > + if (ret != 0) > > + return -EINVAL; > > + > > + mutex_init(&ov8858->mutex); > > + > > + sd = &ov8858->subdev; > > + v4l2_i2c_subdev_init(sd, client, &ov8858_subdev_ops); > > + ret = ov8858_initialize_controls(ov8858); > > + if (ret) > > + goto err_destroy_mutex; > > + > > + ret = __ov8858_power_on(ov8858); > > + if (ret) > > + goto err_free_handler; > > + > > + ret = ov8858_check_sensor_id(ov8858, client); > > + if (ret) > > + goto err_power_off; > > + > > + sd->internal_ops = &ov8858_internal_ops; > > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + ov8858->pad.flags = MEDIA_PAD_FL_SOURCE; > > + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; > > + ret = media_entity_pads_init(&sd->entity, 1, &ov8858->pad); > > + if (ret < 0) > > + goto err_power_off; > > + > > + ret = v4l2_async_register_subdev_sensor(sd); > > + if (ret) { > > + dev_err(dev, "v4l2 async register subdev failed\n"); > > + goto err_clean_entity; > > + } > > + > > + pm_runtime_set_active(dev); > > + pm_runtime_enable(dev); > > + pm_runtime_idle(dev); > > + > > + return 0; > > + > > +err_clean_entity: > > + media_entity_cleanup(&sd->entity); > > +err_power_off: > > + __ov8858_power_off(ov8858); > > +err_free_handler: > > + v4l2_ctrl_handler_free(&ov8858->ctrl_handler); > > +err_destroy_mutex: > > + mutex_destroy(&ov8858->mutex); > > + > > + return ret; > > +} > > + > > +static int ov8858_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct ov8858 *ov8858 = to_ov8858(sd); > > + > > + v4l2_async_unregister_subdev(sd); > > +#ifdef CONFIG_MEDIA_CONTROLLER > > You select this symbol, you can drop this > > > + media_entity_cleanup(&sd->entity); > > +#endif > > + v4l2_ctrl_handler_free(&ov8858->ctrl_handler); > > + mutex_destroy(&ov8858->mutex); > > + > > + pm_runtime_disable(&client->dev); > > + if (!pm_runtime_status_suspended(&client->dev)) > > + __ov8858_power_off(ov8858); > > + pm_runtime_set_suspended(&client->dev); > > + > > + return 0; > > +} > > + > > +#if IS_ENABLED(CONFIG_OF) > > Should we depend on CONFIG_OF ? > > > +static const struct of_device_id ov8858_of_match[] = { > > + { .compatible = "ovti,ov8858" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, ov8858_of_match); > > +#endif > > + > > +static const struct i2c_device_id ov8858_match_id[] = { > > + { "ovti,ov8858", 0 }, > > + { }, > > +}; > > I think you can drop this one if we depend on CONFIG_OF ? > > > + > > +static struct i2c_driver ov8858_i2c_driver = { > > + .driver = { > > + .name = OV8858_NAME, > > + .pm = &ov8858_pm_ops, > > + .of_match_table = of_match_ptr(ov8858_of_match), > > + }, > > + .probe = &ov8858_probe, > > Here > .probe_new > > Thanks, lot of comments, but mostly cleanups, nothing huge or > blocking! > > Thanks > j > > > > + .remove = &ov8858_remove, > > + .id_table = ov8858_match_id, > > +}; > > + > > +module_i2c_driver(ov8858_i2c_driver); > > + > > +MODULE_DESCRIPTION("OmniVision ov8858 sensor driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.34.1 > >
