On 21/10/2022 16:27, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@xxxxxxxx> > > Following down the now unused symbols and header files, some additional > content can be dropped that is used by neither the s3c64xx DT support > nor the crag6410 board. > > Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> > --- > arch/arm/mach-s3c/Kconfig | 50 -- > arch/arm/mach-s3c/Kconfig.s3c64xx | 5 - > arch/arm/mach-s3c/Makefile | 2 - > arch/arm/mach-s3c/Makefile.s3c64xx | 1 - > arch/arm/mach-s3c/adc-core.h | 24 - > arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 - > arch/arm/mach-s3c/backlight-s3c64xx.h | 22 - > arch/arm/mach-s3c/cpu.h | 47 -- > arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 ---- > arch/arm/mach-s3c/devs.c | 725 ------------------- > arch/arm/mach-s3c/devs.h | 37 - > arch/arm/mach-s3c/dma-s3c64xx.h | 57 -- > arch/arm/mach-s3c/dma.h | 2 - > arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 ---- > arch/arm/mach-s3c/gpio-cfg.h | 19 - > arch/arm/mach-s3c/gpio-core.h | 3 - > arch/arm/mach-s3c/gpio-samsung.c | 443 +---------- > arch/arm/mach-s3c/iic-core.h | 7 - > arch/arm/mach-s3c/init.c | 26 +- > arch/arm/mach-s3c/map-s3c.h | 37 - > arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 - > arch/arm/mach-s3c/otom.h | 25 - > arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 - > arch/arm/mach-s3c/pm-s3c64xx.c | 83 --- > arch/arm/mach-s3c/pm.c | 7 +- > arch/arm/mach-s3c/pm.h | 12 - > arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 -- > arch/arm/mach-s3c/s3c6400.c | 6 - > arch/arm/mach-s3c/s3c6410.c | 9 - > arch/arm/mach-s3c/sdhci.h | 25 - > arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 - > arch/arm/mach-s3c/sleep-s3c64xx.S | 27 - > include/linux/platform_data/media/s5p_hdmi.h | 32 - > 33 files changed, 6 insertions(+), 2146 deletions(-) > delete mode 100644 arch/arm/mach-s3c/adc-core.h > delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h > delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h > delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h > delete mode 100644 arch/arm/mach-s3c/dma.h > delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h > delete mode 100644 arch/arm/mach-s3c/otom.h > delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h > delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c > delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h > > diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig > index 0dde4010aa64..b3656109f1f7 100644 > --- a/arch/arm/mach-s3c/Kconfig > +++ b/arch/arm/mach-s3c/Kconfig > @@ -90,36 +90,6 @@ config S3C_DEV_I2C1 > help > Compile in platform device definitions for I2C channel 1 > > -config S3C_DEV_I2C2 > - bool > - help > - Compile in platform device definitions for I2C channel 2 > - > -config S3C_DEV_I2C3 > - bool > - help > - Compile in platform device definition for I2C controller 3 > - > -config S3C_DEV_I2C4 > - bool > - help > - Compile in platform device definition for I2C controller 4 > - > -config S3C_DEV_I2C5 > - bool > - help > - Compile in platform device definition for I2C controller 5 > - > -config S3C_DEV_I2C6 > - bool > - help > - Compile in platform device definition for I2C controller 6 > - > -config S3C_DEV_I2C7 > - bool > - help > - Compile in platform device definition for I2C controller 7 > - > config S3C_DEV_FB > bool > help > @@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG > help > Compile in platform device definition for USB high-speed OtG > > -config S3C_DEV_WDT > - bool > - help > - Compile in platform device definition for Watchdog Timer > - > -config S3C_DEV_NAND > - bool > - help > - Compile in platform device definition for NAND controller > - > -config S3C_DEV_ONENAND > - bool > - help > - Compile in platform device definition for OneNAND controller > - > -config S3C_DEV_RTC > - bool > - help > - Compile in platform device definition for RTC > - > config S3C64XX_DEV_SPI0 > bool > help > diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx > index c403d7642f0a..c52c7ce1d8fa 100644 > --- a/arch/arm/mach-s3c/Kconfig.s3c64xx > +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx > @@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX > select HAVE_TCM > select PLAT_SAMSUNG > select PM_GENERIC_DOMAINS if PM > - select S3C_DEV_NAND if ATAGS > select S3C_GPIO_TRACK if ATAGS > - select S3C2410_WATCHDOG This does not seem right. S3C2410_WATCHDOG is a driver used by all (including Exynos) platforms. > select SAMSUNG_ATAGS if ATAGS > select SAMSUNG_WAKEMASK if PM > - select WATCHDOG > help > Samsung S3C64XX series based systems > > @@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410 > select S3C_DEV_HSMMC1 > select S3C_DEV_HSMMC2 > select S3C_DEV_I2C1 > - select S3C_DEV_RTC This as well. > select S3C_DEV_USB_HOST > select S3C_DEV_USB_HSOTG > - select S3C_DEV_WDT > select SAMSUNG_DEV_KEYPAD > select SAMSUNG_DEV_PWM > help Best regards, Krzysztof
