Hey all, sorry I noticed that the TODO file is still in the staging directory. Will be fixed in V11. Greetings, Sebastian On 22.10.2022 02:05, Sebastian Fricke wrote:
From: Nas Chung <nas.chung@xxxxxxxxxxxxxxx> Add a TODO file with remaining elements to be improved/added. Signed-off-by: Robert Beckett <bob.beckett@xxxxxxxxxxxxx> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx> Signed-off-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx> Signed-off-by: Nas Chung <nas.chung@xxxxxxxxxxxxxxx> --- drivers/staging/media/wave5/TODO | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 drivers/staging/media/wave5/TODO diff --git a/drivers/staging/media/wave5/TODO b/drivers/staging/media/wave5/TODO new file mode 100644 index 000000000000..6cc38d4ccbc9 --- /dev/null +++ b/drivers/staging/media/wave5/TODO @@ -0,0 +1,25 @@ +* Handle interrupts better + +Currently the interrupt handling uses an unusual design employing a kfifo to +transfer irq status to irq thread. This was done as a work around for dropped +interrupts seen with IRQF_ONESHOT based handling. + +This needs further investigation and fixing properly, with the aid of +C&M and StarFive engineers. + +* remove all struct fields, that are assigned to but not used in the code, add + documentation about each removed field at the macro for the register it is + related too. + +* power management handling - add (runtime_)suspen/resume cb where the clock is enabled + +* revise logic of wave5_vpu_(dec/enc)_register_framebuffer + +* check if the normal kernel endianness/__swab32 routines are sufficient. (instead of the ones + implemented in the driver) + +* Extended Codec Controls for encoder. + +implement extended codec control for HEVC/H264 encoder. +PROFILE/LEVEL/MIN_QP/MAX_QP/LOOP_FILTER/HFLIP/VFIIP/ROTATE/ +GOP_SIZE/RC_ENABLE/I_PERIOD/BITRATE. -- 2.25.1
