From: Arnd Bergmann <arnd@xxxxxxxx> This driver was for the davinci dm644x and dm3xx platforms that are now removed from the kernel, so there are no more users. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- MAINTAINERS | 1 - drivers/staging/media/Kconfig | 1 - drivers/staging/media/Makefile | 1 - .../media/deprecated/vpfe_capture/Kconfig | 58 - .../media/deprecated/vpfe_capture/Makefile | 4 - .../media/deprecated/vpfe_capture/TODO | 7 - .../deprecated/vpfe_capture/ccdc_hw_device.h | 80 - .../deprecated/vpfe_capture/dm355_ccdc.c | 934 -------- .../deprecated/vpfe_capture/dm355_ccdc.h | 308 --- .../deprecated/vpfe_capture/dm355_ccdc_regs.h | 297 --- .../deprecated/vpfe_capture/dm644x_ccdc.c | 879 -------- .../deprecated/vpfe_capture/dm644x_ccdc.h | 171 -- .../vpfe_capture/dm644x_ccdc_regs.h | 140 -- .../media/deprecated/vpfe_capture/isif.c | 1127 ---------- .../media/deprecated/vpfe_capture/isif.h | 518 ----- .../media/deprecated/vpfe_capture/isif_regs.h | 256 --- .../deprecated/vpfe_capture/vpfe_capture.c | 1902 ----------------- include/media/davinci/vpfe_capture.h | 177 -- 18 files changed, 6861 deletions(-) delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Kconfig delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Makefile delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/TODO delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.c delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif_regs.h delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c delete mode 100644 include/media/davinci/vpfe_capture.h diff --git a/MAINTAINERS b/MAINTAINERS index bb3e20381128..5f18c0264e98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20491,7 +20491,6 @@ W: https://linuxtv.org Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git F: drivers/media/platform/ti/davinci/ -F: drivers/staging/media/deprecated/vpfe_capture/ F: include/media/davinci/ TI ENHANCED CAPTURE (eCAP) DRIVER diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index d4f03b203ae5..ddab8e0a0809 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -57,7 +57,6 @@ source "drivers/staging/media/deprecated/meye/Kconfig" source "drivers/staging/media/deprecated/saa7146/Kconfig" source "drivers/staging/media/deprecated/stkwebcam/Kconfig" source "drivers/staging/media/deprecated/tm6000/Kconfig" -source "drivers/staging/media/deprecated/vpfe_capture/Kconfig" source "drivers/staging/media/deprecated/zr364xx/Kconfig" endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index a387692b84f2..38e6cdfea29c 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -14,5 +14,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/ obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/ obj-$(CONFIG_VIDEO_VIU) += deprecated/fsl-viu/ obj-$(CONFIG_USB_ZR364XX) += deprecated/zr364xx/ -obj-y += deprecated/vpfe_capture/ obj-y += deprecated/saa7146/ diff --git a/drivers/staging/media/deprecated/vpfe_capture/Kconfig b/drivers/staging/media/deprecated/vpfe_capture/Kconfig deleted file mode 100644 index 10250e7e566b..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/Kconfig +++ /dev/null @@ -1,58 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config VIDEO_DM6446_CCDC - tristate "TI DM6446 CCDC video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and dm644x_ccdc.ko - -config VIDEO_DM355_CCDC - tristate "TI DM355 CCDC video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and dm355_ccdc.ko - -config VIDEO_DM365_ISIF - tristate "TI DM365 ISIF video capture driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF_DMA_CONTIG - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - This driver is deprecated and is scheduled for removal by - the beginning of 2023. See the TODO file for more information. - - To compile this driver as a module, choose M here. There will - be two modules called vpfe_capture.ko and isif.ko diff --git a/drivers/staging/media/deprecated/vpfe_capture/Makefile b/drivers/staging/media/deprecated/vpfe_capture/Makefile deleted file mode 100644 index 609e8dc09ce7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o dm644x_ccdc.o -obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o dm355_ccdc.o -obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o isif.o diff --git a/drivers/staging/media/deprecated/vpfe_capture/TODO b/drivers/staging/media/deprecated/vpfe_capture/TODO deleted file mode 100644 index ce654d7337af..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/TODO +++ /dev/null @@ -1,7 +0,0 @@ -These are one of the few drivers still not using the vb2 -framework, so these drivers are now deprecated with the intent of -removing them altogether by the beginning of 2023. - -In order to keep these drivers they have to be converted to vb2. -If someone is interested in doing this work, then contact the -linux-media mailinglist (https://linuxtv.org/lists.php). diff --git a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h deleted file mode 100644 index a545052a95a9..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * ccdc device API - */ -#ifndef _CCDC_HW_DEVICE_H -#define _CCDC_HW_DEVICE_H - -#ifdef __KERNEL__ -#include <linux/videodev2.h> -#include <linux/device.h> -#include <media/davinci/vpfe_types.h> -#include <media/davinci/ccdc_types.h> - -/* - * ccdc hw operations - */ -struct ccdc_hw_ops { - /* Pointer to initialize function to initialize ccdc device */ - int (*open) (struct device *dev); - /* Pointer to deinitialize function */ - int (*close) (struct device *dev); - /* set ccdc base address */ - void (*set_ccdc_base)(void *base, int size); - /* Pointer to function to enable or disable ccdc */ - void (*enable) (int en); - /* reset sbl. only for 6446 */ - void (*reset) (void); - /* enable output to sdram */ - void (*enable_out_to_sdram) (int en); - /* Pointer to function to set hw parameters */ - int (*set_hw_if_params) (struct vpfe_hw_if_param *param); - /* get interface parameters */ - int (*get_hw_if_params) (struct vpfe_hw_if_param *param); - /* Pointer to function to configure ccdc */ - int (*configure) (void); - - /* Pointer to function to set buffer type */ - int (*set_buftype) (enum ccdc_buftype buf_type); - /* Pointer to function to get buffer type */ - enum ccdc_buftype (*get_buftype) (void); - /* Pointer to function to set frame format */ - int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); - /* Pointer to function to get frame format */ - enum ccdc_frmfmt (*get_frame_format) (void); - /* enumerate hw pix formats */ - int (*enum_pix)(u32 *hw_pix, int i); - /* Pointer to function to set buffer type */ - u32 (*get_pixel_format) (void); - /* Pointer to function to get pixel format. */ - int (*set_pixel_format) (u32 pixfmt); - /* Pointer to function to set image window */ - int (*set_image_window) (struct v4l2_rect *win); - /* Pointer to function to set image window */ - void (*get_image_window) (struct v4l2_rect *win); - /* Pointer to function to get line length */ - unsigned int (*get_line_length) (void); - - /* Pointer to function to set frame buffer address */ - void (*setfbaddr) (unsigned long addr); - /* Pointer to function to get field id */ - int (*getfid) (void); -}; - -struct ccdc_hw_device { - /* ccdc device name */ - char name[32]; - /* module owner */ - struct module *owner; - /* hw ops */ - struct ccdc_hw_ops hw_ops; -}; - -/* Used by CCDC module to register & unregister with vpfe capture driver */ -int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev); -void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev); - -#endif -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c deleted file mode 100644 index da8db53e9498..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c +++ /dev/null @@ -1,934 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - * - * CCDC hardware module for DM355 - * ------------------------------ - * - * This module is for configuring DM355 CCD controller of VPFE to capture - * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules - * such as Defect Pixel Correction, Color Space Conversion etc to - * pre-process the Bayer RGB data, before writing it to SDRAM. - * - * TODO: 1) Raw bayer parameter settings and bayer capture - * 2) Split module parameter structure to module specific ioctl structs - * 3) add support for lense shading correction - * 4) investigate if enum used for user space type definition - * to be replaced by #defines or integer - */ -#include <linux/platform_device.h> -#include <linux/uaccess.h> -#include <linux/videodev2.h> -#include <linux/err.h> -#include <linux/module.h> - -#include "dm355_ccdc.h" -#include <media/davinci/vpss.h> - -#include "dm355_ccdc_regs.h" -#include "ccdc_hw_device.h" - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("CCDC Driver for DM355"); -MODULE_AUTHOR("Texas Instruments"); - -static struct ccdc_oper_config { - struct device *dev; - /* CCDC interface type */ - enum vpfe_hw_if_type if_type; - /* Raw Bayer configuration */ - struct ccdc_params_raw bayer; - /* YCbCr configuration */ - struct ccdc_params_ycbcr ycbcr; - /* ccdc base address */ - void __iomem *base_addr; -} ccdc_cfg = { - /* Raw configurations */ - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = CCDC_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .gain = { - .r_ye = 256, - .gb_g = 256, - .gr_cy = 256, - .b_mg = 256 - }, - .config_params = { - .datasft = 2, - .mfilt1 = CCDC_NO_MEDIAN_FILTER1, - .mfilt2 = CCDC_NO_MEDIAN_FILTER2, - .alaw = { - .gamma_wd = 2, - }, - .blk_clamp = { - .sample_pixel = 1, - .dc_sub = 25 - }, - .col_pat_field0 = { - .olop = CCDC_GREEN_BLUE, - .olep = CCDC_BLUE, - .elop = CCDC_RED, - .elep = CCDC_GREEN_RED - }, - .col_pat_field1 = { - .olop = CCDC_GREEN_BLUE, - .olep = CCDC_BLUE, - .elop = CCDC_RED, - .elep = CCDC_GREEN_RED - }, - }, - }, - /* YCbCr configuration */ - .ycbcr = { - .win = CCDC_WIN_PAL, - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .bt656_enable = 1, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED - }, -}; - - -/* Raw Bayer formats */ -static u32 ccdc_raw_bayer_pix_formats[] = - {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static u32 ccdc_raw_yuv_pix_formats[] = - {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(ccdc_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, ccdc_cfg.base_addr + offset); -} - -static void ccdc_enable(int en) -{ - unsigned int temp; - temp = regr(SYNCEN); - temp &= (~CCDC_SYNCEN_VDHDEN_MASK); - temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); - regw(temp, SYNCEN); -} - -static void ccdc_enable_output_to_sdram(int en) -{ - unsigned int temp; - temp = regr(SYNCEN); - temp &= (~(CCDC_SYNCEN_WEN_MASK)); - temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); - regw(temp, SYNCEN); -} - -static void ccdc_config_gain_offset(void) -{ - /* configure gain */ - regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); - regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); - regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); - regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); - /* configure offset */ - regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); -} - -/* - * ccdc_restore_defaults() - * This function restore power on defaults in the ccdc registers - */ -static int ccdc_restore_defaults(void) -{ - int i; - - dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); - /* set all registers to zero */ - for (i = 0; i <= CCDC_REG_LAST; i += 4) - regw(0, i); - - /* now override the values with power on defaults in registers */ - regw(MODESET_DEFAULT, MODESET); - /* no culling support */ - regw(CULH_DEFAULT, CULH); - regw(CULV_DEFAULT, CULV); - /* Set default Gain and Offset */ - ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; - ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; - ccdc_config_gain_offset(); - regw(OUTCLIP_DEFAULT, OUTCLIP); - regw(LSCCFG2_DEFAULT, LSCCFG2); - /* select ccdc input */ - if (vpss_select_ccdc_source(VPSS_CCDCIN)) { - dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); - return -EFAULT; - } - /* select ccdc clock */ - if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { - dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); - return -EFAULT; - } - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); - return 0; -} - -static int ccdc_open(struct device *device) -{ - return ccdc_restore_defaults(); -} - -static int ccdc_close(struct device *device) -{ - /* disable clock */ - vpss_enable_clock(VPSS_CCDC_CLOCK, 0); - /* do nothing for now */ - return 0; -} -/* - * ccdc_setwin() - * This function will configure the window size to - * be capture in CCDC reg. - */ -static void ccdc_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int mid_img = 0; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); - - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; - - /* Writing the horizontal info into the registers */ - regw(horz_start, SPH); - regw(horz_nr_pixels, NPH); - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* Since first line doesn't have any data */ - vert_start += 1; - /* configure VDINT0 and VDINT1 */ - regw(vert_start, VDINT0); - } else { - /* Since first line doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* configure VDINT0 and VDINT1 */ - mid_img = vert_start + (image_win->height / 2); - regw(vert_start, VDINT0); - regw(mid_img, VDINT1); - } - regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); - regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); - regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); -} - -/* This function will configure CCDC for YCbCr video capture */ -static void ccdc_config_ycbcr(void) -{ - struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; - u32 temp; - - /* first set the CCDC power on defaults values in all registers */ - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); - ccdc_restore_defaults(); - - /* configure pixel format & video frame format */ - temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << - CCDC_INPUT_MODE_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << - CCDC_FRM_FMT_SHIFT)); - - /* setup BT.656 sync mode */ - if (params->bt656_enable) { - regw(CCDC_REC656IF_BT656_EN, REC656IF); - /* - * configure the FID, VD, HD pin polarity fld,hd pol positive, - * vd negative, 8-bit pack mode - */ - temp |= CCDC_VD_POL_NEGATIVE; - } else { /* y/c external sync mode */ - temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << - CCDC_FID_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << - CCDC_HD_POL_SHIFT) | - ((params->vd_pol & CCDC_VD_POL_MASK) << - CCDC_VD_POL_SHIFT)); - } - - /* pack the data to 8-bit */ - temp |= CCDC_DATA_PACK_ENABLE; - - regw(temp, MODESET); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 2); - - /* configure the order of y cb cr in SD-RAM */ - temp = (params->pix_order << CCDC_Y8POS_SHIFT); - temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; - regw(temp, CCDCFG); - - /* - * configure the horizontal line offset. This is done by rounding up - * width to a multiple of 16 pixels and multiply by two to account for - * y:cb:cr 4:2:2 data - */ - regw(((params->win.width * 2 + 31) >> 5), HSIZE); - - /* configure the memory line offset */ - if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { - /* two fields are interleaved in memory */ - regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); - } - - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); -} - -/* - * ccdc_config_black_clamp() - * configure parameters for Optical Black Clamp - */ -static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) -{ - u32 val; - - if (!bclamp->b_clamp_enable) { - /* configure DCSub */ - regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); - regw(0x0000, CLAMP); - return; - } - /* Enable the Black clamping, set sample lines and pixels */ - val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | - ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << - CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; - regw(val, CLAMP); - - /* If Black clamping is enable then make dcsub 0 */ - val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) - << CCDC_NUM_LINE_CALC_SHIFT; - regw(val, DCSUB); -} - -/* - * ccdc_config_black_compense() - * configure parameters for Black Compensation - */ -static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) -{ - u32 val; - - val = (bcomp->b & CCDC_BLK_COMP_MASK) | - ((bcomp->gb & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GB_COMP_SHIFT); - regw(val, BLKCMP1); - - val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GR_COMP_SHIFT) | - ((bcomp->r & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_R_COMP_SHIFT); - regw(val, BLKCMP0); -} - -/* - * ccdc_write_dfc_entry() - * write an entry in the dfc table. - */ -static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) -{ -/* TODO This is to be re-visited and adjusted */ -#define DFC_WRITE_WAIT_COUNT 1000 - u32 val, count = DFC_WRITE_WAIT_COUNT; - - regw(dfc->dft_corr_vert[index], DFCMEM0); - regw(dfc->dft_corr_horz[index], DFCMEM1); - regw(dfc->dft_corr_sub1[index], DFCMEM2); - regw(dfc->dft_corr_sub2[index], DFCMEM3); - regw(dfc->dft_corr_sub3[index], DFCMEM4); - /* set WR bit to write */ - val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; - regw(val, DFCMEMCTL); - - /* - * Assume, it is very short. If we get an error, we need to - * adjust this value - */ - while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) - count--; - /* - * TODO We expect the count to be non-zero to be successful. Adjust - * the count if write requires more time - */ - - if (count) { - dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); - return -1; - } - return 0; -} - -/* - * ccdc_config_vdfc() - * configure parameters for Vertical Defect Correction - */ -static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) -{ - u32 val; - int i; - - /* Configure General Defect Correction. The table used is from IPIPE */ - val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; - - /* Configure Vertical Defect Correction if needed */ - if (!dfc->ver_dft_en) { - /* Enable only General Defect Correction */ - regw(val, DFCCTL); - return 0; - } - - if (dfc->table_size > CCDC_DFT_TABLE_SIZE) - return -EINVAL; - - val |= CCDC_DFCCTL_VDFC_DISABLE; - val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << - CCDC_DFCCTL_VDFCSL_SHIFT; - val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << - CCDC_DFCCTL_VDFCUDA_SHIFT; - val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << - CCDC_DFCCTL_VDFLSFT_SHIFT; - regw(val , DFCCTL); - - /* clear address ptr to offset 0 */ - val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; - - /* write defect table entries */ - for (i = 0; i < dfc->table_size; i++) { - /* increment address for non zero index */ - if (i != 0) - val = CCDC_DFCMEMCTL_INC_ADDR; - regw(val, DFCMEMCTL); - if (ccdc_write_dfc_entry(i, dfc) < 0) - return -EFAULT; - } - - /* update saturation level and enable dfc */ - regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); - val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << - CCDC_DFCCTL_VDFCEN_SHIFT); - regw(val, DFCCTL); - return 0; -} - -/* - * ccdc_config_csc() - * configure parameters for color space conversion - * Each register CSCM0-7 has two values in S8Q5 format. - */ -static void ccdc_config_csc(struct ccdc_csc *csc) -{ - u32 val1 = 0, val2; - int i; - - if (!csc->enable) - return; - - /* Enable the CSC sub-module */ - regw(CCDC_CSC_ENABLE, CSCCTL); - - /* Converting the co-eff as per the format of the register */ - for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { - if ((i % 2) == 0) { - /* CSCM - LSB */ - val1 = (csc->coeff[i].integer & - CCDC_CSC_COEF_INTEG_MASK) - << CCDC_CSC_COEF_INTEG_SHIFT; - /* - * convert decimal part to binary. Use 2 decimal - * precision, user values range from .00 - 0.99 - */ - val1 |= (((csc->coeff[i].decimal & - CCDC_CSC_COEF_DECIMAL_MASK) * - CCDC_CSC_DEC_MAX) / 100); - } else { - - /* CSCM - MSB */ - val2 = (csc->coeff[i].integer & - CCDC_CSC_COEF_INTEG_MASK) - << CCDC_CSC_COEF_INTEG_SHIFT; - val2 |= (((csc->coeff[i].decimal & - CCDC_CSC_COEF_DECIMAL_MASK) * - CCDC_CSC_DEC_MAX) / 100); - val2 <<= CCDC_CSCM_MSB_SHIFT; - val2 |= val1; - regw(val2, (CSCM0 + ((i - 1) << 1))); - } - } -} - -/* - * ccdc_config_color_patterns() - * configure parameters for color patterns - */ -static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, - struct ccdc_col_pat *pat1) -{ - u32 val; - - val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | - (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | - (pat1->elop << 12) | (pat1->elep << 14)); - regw(val, COLPTN); -} - -/* This function will configure CCDC for Raw mode image capture */ -static int ccdc_config_raw(void) -{ - struct ccdc_params_raw *params = &ccdc_cfg.bayer; - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int val; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); - - /* restore power on defaults to register */ - ccdc_restore_defaults(); - - /* CCDCFG register: - * set CCD Not to swap input since input is RAW data - * set FID detection function to Latch at V-Sync - * set WENLOG - ccdc valid area to AND - * set TRGSEL to WENBIT - * set EXTRG to DISABLE - * disable latching function on VSYNC - shadowed registers - */ - regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | - CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | - CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); - - /* - * Set VDHD direction to input, input type to raw input - * normal data polarity, do not use external WEN - */ - val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | - CCDC_EXWEN_DISABLE); - - /* - * Configure the vertical sync polarity (MODESET.VDPOL), horizontal - * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), - * frame format(progressive or interlace), & pixel format (Input mode) - */ - val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | - ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | - ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); - - /* set pack for alaw compression */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - val |= CCDC_DATA_PACK_ENABLE; - - /* Configure for LPF */ - if (config_params->lpf_enable) - val |= (config_params->lpf_enable & CCDC_LPF_MASK) << - CCDC_LPF_SHIFT; - - /* Configure the data shift */ - val |= (config_params->datasft & CCDC_DATASFT_MASK) << - CCDC_DATASFT_SHIFT; - regw(val , MODESET); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val); - - /* Configure the Median Filter threshold */ - regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); - - /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ - val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | - CCDC_CFA_MOSAIC; - - /* Enable and configure aLaw register if needed */ - if (config_params->alaw.enable) { - val |= (CCDC_ALAW_ENABLE | - ((config_params->alaw.gamma_wd & - CCDC_ALAW_GAMMA_WD_MASK) << - CCDC_GAMMAWD_INPUT_SHIFT)); - } - - /* Configure Median filter1 & filter2 */ - val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | - (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); - - regw(val, GAMMAWD); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 1); - - /* Optical Clamp Averaging */ - ccdc_config_black_clamp(&config_params->blk_clamp); - - /* Black level compensation */ - ccdc_config_black_compense(&config_params->blk_comp); - - /* Vertical Defect Correction if needed */ - if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) - return -EFAULT; - - /* color space conversion */ - ccdc_config_csc(&config_params->csc); - - /* color pattern */ - ccdc_config_color_patterns(&config_params->col_pat_field0, - &config_params->col_pat_field1); - - /* Configure the Gain & offset control */ - ccdc_config_gain_offset(); - - dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val); - - /* Configure DATAOFST register */ - val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << - CCDC_DATAOFST_H_SHIFT; - val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << - CCDC_DATAOFST_V_SHIFT; - regw(val, DATAOFST); - - /* configuring HSIZE register */ - val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << - CCDC_HSIZE_FLIP_SHIFT; - - /* If pack 8 is enable then 1 pixel will take 1 byte */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) { - val |= (((params->win.width) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK; - - /* adjust to multiple of 32 */ - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", - (((params->win.width) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK); - } else { - /* else one pixel will take 2 byte */ - val |= (((params->win.width * 2) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK; - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", - (((params->win.width * 2) + 31) >> 5) & - CCDC_HSIZE_VAL_MASK); - } - regw(val, HSIZE); - - /* Configure SDOFST register */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_enable) { - /* For interlace inverse mode */ - regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_INTERLACE_INVERSE); - } else { - /* For interlace non inverse mode */ - regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_INTERLACE_NORMAL); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - if (params->image_invert_enable) { - /* For progessive inverse mode */ - regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_PROGRESSIVE_INVERSE); - } else { - /* For progessive non inverse mode */ - regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", - CCDC_SDOFST_PROGRESSIVE_NORMAL); - } - } - dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); - return 0; -} - -static int ccdc_configure(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_config_raw(); - else - ccdc_config_ycbcr(); - return 0; -} - -static int ccdc_set_buftype(enum ccdc_buftype buf_type) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.buf_type = buf_type; - else - ccdc_cfg.ycbcr.buf_type = buf_type; - return 0; -} -static enum ccdc_buftype ccdc_get_buftype(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.buf_type; - return ccdc_cfg.ycbcr.buf_type; -} - -static int ccdc_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { - *pix = ccdc_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { - *pix = ccdc_raw_yuv_pix_formats[i]; - ret = 0; - } - } - return ret; -} - -static int ccdc_set_pixel_format(u32 pixfmt) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - if (pixfmt == V4L2_PIX_FMT_SBGGR8) - alaw->enable = 1; - else if (pixfmt != V4L2_PIX_FMT_SBGGR16) - return -EINVAL; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - } - return 0; -} -static u32 ccdc_get_pixel_format(void) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - u32 pixfmt; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - if (alaw->enable) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} -static int ccdc_set_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.win = *win; - else - ccdc_cfg.ycbcr.win = *win; - return 0; -} - -static void ccdc_get_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - *win = ccdc_cfg.bayer.win; - else - *win = ccdc_cfg.ycbcr.win; -} - -static unsigned int ccdc_get_line_length(void) -{ - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int len; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if ((config_params->alaw.enable) || - (config_params->data_sz == CCDC_DATA_8BITS)) - len = ccdc_cfg.bayer.win.width; - else - len = ccdc_cfg.bayer.win.width * 2; - } else - len = ccdc_cfg.ycbcr.win.width * 2; - return ALIGN(len, 32); -} - -static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.frm_fmt = frm_fmt; - else - ccdc_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} - -static enum ccdc_frmfmt ccdc_get_frame_format(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.frm_fmt; - else - return ccdc_cfg.ycbcr.frm_fmt; -} - -static int ccdc_getfid(void) -{ - return (regr(MODESET) >> 15) & 1; -} - -/* misc operations */ -static inline void ccdc_setfbaddr(unsigned long addr) -{ - regw((addr >> 21) & 0x007f, STADRH); - regw((addr >> 5) & 0x0ffff, STADRL); -} - -static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - ccdc_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_YCBCR_SYNC_16: - case VPFE_YCBCR_SYNC_8: - ccdc_cfg.ycbcr.vd_pol = params->vdpol; - ccdc_cfg.ycbcr.hd_pol = params->hdpol; - break; - default: - /* TODO add support for raw bayer here */ - return -EINVAL; - } - return 0; -} - -static const struct ccdc_hw_device ccdc_hw_dev = { - .name = "DM355 CCDC", - .owner = THIS_MODULE, - .hw_ops = { - .open = ccdc_open, - .close = ccdc_close, - .enable = ccdc_enable, - .enable_out_to_sdram = ccdc_enable_output_to_sdram, - .set_hw_if_params = ccdc_set_hw_if_params, - .configure = ccdc_configure, - .set_buftype = ccdc_set_buftype, - .get_buftype = ccdc_get_buftype, - .enum_pix = ccdc_enum_pix, - .set_pixel_format = ccdc_set_pixel_format, - .get_pixel_format = ccdc_get_pixel_format, - .set_frame_format = ccdc_set_frame_format, - .get_frame_format = ccdc_get_frame_format, - .set_image_window = ccdc_set_image_window, - .get_image_window = ccdc_get_image_window, - .get_line_length = ccdc_get_line_length, - .setfbaddr = ccdc_setfbaddr, - .getfid = ccdc_getfid, - }, -}; - -static int dm355_ccdc_probe(struct platform_device *pdev) -{ - void (*setup_pinmux)(void); - struct resource *res; - int status = 0; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&ccdc_hw_dev); - if (status < 0) - return status; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - status = -ENODEV; - goto fail_nores; - } - - res = request_mem_region(res->start, resource_size(res), res->name); - if (!res) { - status = -EBUSY; - goto fail_nores; - } - - ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); - if (!ccdc_cfg.base_addr) { - status = -ENOMEM; - goto fail_nomem; - } - - /* Platform data holds setup_pinmux function ptr */ - if (NULL == pdev->dev.platform_data) { - status = -ENODEV; - goto fail_nomap; - } - setup_pinmux = pdev->dev.platform_data; - /* - * setup Mux configuration for ccdc which may be different for - * different SoCs using this CCDC - */ - setup_pinmux(); - ccdc_cfg.dev = &pdev->dev; - printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); - return 0; -fail_nomap: - iounmap(ccdc_cfg.base_addr); -fail_nomem: - release_mem_region(res->start, resource_size(res)); -fail_nores: - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return status; -} - -static int dm355_ccdc_remove(struct platform_device *pdev) -{ - struct resource *res; - - iounmap(ccdc_cfg.base_addr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return 0; -} - -static struct platform_driver dm355_ccdc_driver = { - .driver = { - .name = "dm355_ccdc", - }, - .remove = dm355_ccdc_remove, - .probe = dm355_ccdc_probe, -}; - -module_platform_driver(dm355_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h deleted file mode 100644 index 1f3d00aa46d1..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h +++ /dev/null @@ -1,308 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - */ -#ifndef _DM355_CCDC_H -#define _DM355_CCDC_H -#include <media/davinci/ccdc_types.h> -#include <media/davinci/vpfe_types.h> - -/* enum for No of pixel per line to be avg. in Black Clamping */ -enum ccdc_sample_length { - CCDC_SAMPLE_1PIXELS, - CCDC_SAMPLE_2PIXELS, - CCDC_SAMPLE_4PIXELS, - CCDC_SAMPLE_8PIXELS, - CCDC_SAMPLE_16PIXELS -}; - -/* enum for No of lines in Black Clamping */ -enum ccdc_sample_line { - CCDC_SAMPLE_1LINES, - CCDC_SAMPLE_2LINES, - CCDC_SAMPLE_4LINES, - CCDC_SAMPLE_8LINES, - CCDC_SAMPLE_16LINES -}; - -/* enum for Alaw gamma width */ -enum ccdc_gamma_width { - CCDC_GAMMA_BITS_13_4, - CCDC_GAMMA_BITS_12_3, - CCDC_GAMMA_BITS_11_2, - CCDC_GAMMA_BITS_10_1, - CCDC_GAMMA_BITS_09_0 -}; - -enum ccdc_colpats { - CCDC_RED, - CCDC_GREEN_RED, - CCDC_GREEN_BLUE, - CCDC_BLUE -}; - -struct ccdc_col_pat { - enum ccdc_colpats olop; - enum ccdc_colpats olep; - enum ccdc_colpats elop; - enum ccdc_colpats elep; -}; - -enum ccdc_datasft { - CCDC_DATA_NO_SHIFT, - CCDC_DATA_SHIFT_1BIT, - CCDC_DATA_SHIFT_2BIT, - CCDC_DATA_SHIFT_3BIT, - CCDC_DATA_SHIFT_4BIT, - CCDC_DATA_SHIFT_5BIT, - CCDC_DATA_SHIFT_6BIT -}; - -enum ccdc_data_size { - CCDC_DATA_16BITS, - CCDC_DATA_15BITS, - CCDC_DATA_14BITS, - CCDC_DATA_13BITS, - CCDC_DATA_12BITS, - CCDC_DATA_11BITS, - CCDC_DATA_10BITS, - CCDC_DATA_8BITS -}; -enum ccdc_mfilt1 { - CCDC_NO_MEDIAN_FILTER1, - CCDC_AVERAGE_FILTER1, - CCDC_MEDIAN_FILTER1 -}; - -enum ccdc_mfilt2 { - CCDC_NO_MEDIAN_FILTER2, - CCDC_AVERAGE_FILTER2, - CCDC_MEDIAN_FILTER2 -}; - -/* structure for ALaw */ -struct ccdc_a_law { - /* Enable/disable A-Law */ - unsigned char enable; - /* Gamma Width Input */ - enum ccdc_gamma_width gamma_wd; -}; - -/* structure for Black Clamping */ -struct ccdc_black_clamp { - /* only if bClampEnable is TRUE */ - unsigned char b_clamp_enable; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_length sample_pixel; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_line sample_ln; - /* only if bClampEnable is TRUE */ - unsigned short start_pixel; - /* only if bClampEnable is FALSE */ - unsigned short sgain; - unsigned short dc_sub; -}; - -/* structure for Black Level Compensation */ -struct ccdc_black_compensation { - /* Constant value to subtract from Red component */ - unsigned char r; - /* Constant value to subtract from Gr component */ - unsigned char gr; - /* Constant value to subtract from Blue component */ - unsigned char b; - /* Constant value to subtract from Gb component */ - unsigned char gb; -}; - -struct ccdc_float { - int integer; - unsigned int decimal; -}; - -#define CCDC_CSC_COEFF_TABLE_SIZE 16 -/* structure for color space converter */ -struct ccdc_csc { - unsigned char enable; - /* - * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99. - * example - to use 1.03, set integer part as 1, and decimal part as 3 - * to use -1.03, set integer part as -1 and decimal part as 3 - */ - struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE]; -}; - -/* Structures for Vertical Defect Correction*/ -enum ccdc_vdf_csl { - CCDC_VDF_NORMAL, - CCDC_VDF_HORZ_INTERPOL_SAT, - CCDC_VDF_HORZ_INTERPOL -}; - -enum ccdc_vdf_cuda { - CCDC_VDF_WHOLE_LINE_CORRECT, - CCDC_VDF_UPPER_DISABLE -}; - -enum ccdc_dfc_mwr { - CCDC_DFC_MWR_WRITE_COMPLETE, - CCDC_DFC_WRITE_REG -}; - -enum ccdc_dfc_mrd { - CCDC_DFC_READ_COMPLETE, - CCDC_DFC_READ_REG -}; - -enum ccdc_dfc_ma_rst { - CCDC_DFC_INCR_ADDR, - CCDC_DFC_CLR_ADDR -}; - -enum ccdc_dfc_mclr { - CCDC_DFC_CLEAR_COMPLETE, - CCDC_DFC_CLEAR -}; - -struct ccdc_dft_corr_ctl { - enum ccdc_vdf_csl vdfcsl; - enum ccdc_vdf_cuda vdfcuda; - unsigned int vdflsft; -}; - -struct ccdc_dft_corr_mem_ctl { - enum ccdc_dfc_mwr dfcmwr; - enum ccdc_dfc_mrd dfcmrd; - enum ccdc_dfc_ma_rst dfcmarst; - enum ccdc_dfc_mclr dfcmclr; -}; - -#define CCDC_DFT_TABLE_SIZE 16 -/* - * Main Structure for vertical defect correction. Vertical defect - * correction can correct up to 16 defects if defects less than 16 - * then pad the rest with 0 - */ -struct ccdc_vertical_dft { - unsigned char ver_dft_en; - unsigned char gen_dft_en; - unsigned int saturation_ctl; - struct ccdc_dft_corr_ctl dft_corr_ctl; - struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl; - int table_size; - unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE]; - unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE]; -}; - -struct ccdc_data_offset { - unsigned char horz_offset; - unsigned char vert_offset; -}; - -/* - * Structure for CCDC configuration parameters for raw capture mode passed - * by application - */ -struct ccdc_config_params_raw { - /* data shift to be applied before storing */ - enum ccdc_datasft datasft; - /* data size value from 8 to 16 bits */ - enum ccdc_data_size data_sz; - /* median filter for sdram */ - enum ccdc_mfilt1 mfilt1; - enum ccdc_mfilt2 mfilt2; - /* low pass filter enable/disable */ - unsigned char lpf_enable; - /* Threshold of median filter */ - int med_filt_thres; - /* - * horz and vertical data offset. Applicable for defect correction - * and lsc - */ - struct ccdc_data_offset data_offset; - /* Structure for Optional A-Law */ - struct ccdc_a_law alaw; - /* Structure for Optical Black Clamp */ - struct ccdc_black_clamp blk_clamp; - /* Structure for Black Compensation */ - struct ccdc_black_compensation blk_comp; - /* structure for vertical Defect Correction Module Configuration */ - struct ccdc_vertical_dft vertical_dft; - /* structure for color space converter Module Configuration */ - struct ccdc_csc csc; - /* color patters for bayer capture */ - struct ccdc_col_pat col_pat_field0; - struct ccdc_col_pat col_pat_field1; -}; - -#ifdef __KERNEL__ -#include <linux/io.h> - -#define CCDC_WIN_PAL {0, 0, 720, 576} -#define CCDC_WIN_VGA {0, 0, 640, 480} - -struct ccdc_params_ycbcr { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* enable BT.656 embedded sync mode */ - int bt656_enable; - /* cb:y:cr:y or y:cb:y:cr in memory */ - enum ccdc_pixorder pix_order; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; -}; - -/* Gain applied to Raw Bayer data */ -struct ccdc_gain { - unsigned short r_ye; - unsigned short gr_cy; - unsigned short gb_g; - unsigned short b_mg; -}; - -/* Structure for CCDC configuration parameters for raw capture mode */ -struct ccdc_params_raw { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; - /* Gain values */ - struct ccdc_gain gain; - /* offset */ - unsigned int ccdc_offset; - /* horizontal flip enable */ - unsigned char horz_flip_enable; - /* - * enable to store the image in inverse order in memory - * (bottom to top) - */ - unsigned char image_invert_enable; - /* Configurable part of raw data */ - struct ccdc_config_params_raw config_params; -}; - -#endif -#endif /* DM355_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h deleted file mode 100644 index eb381f075245..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h +++ /dev/null @@ -1,297 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2005-2009 Texas Instruments Inc - */ -#ifndef _DM355_CCDC_REGS_H -#define _DM355_CCDC_REGS_H - -/**************************************************************************\ -* Register OFFSET Definitions -\**************************************************************************/ -#define SYNCEN 0x00 -#define MODESET 0x04 -#define HDWIDTH 0x08 -#define VDWIDTH 0x0c -#define PPLN 0x10 -#define LPFR 0x14 -#define SPH 0x18 -#define NPH 0x1c -#define SLV0 0x20 -#define SLV1 0x24 -#define NLV 0x28 -#define CULH 0x2c -#define CULV 0x30 -#define HSIZE 0x34 -#define SDOFST 0x38 -#define STADRH 0x3c -#define STADRL 0x40 -#define CLAMP 0x44 -#define DCSUB 0x48 -#define COLPTN 0x4c -#define BLKCMP0 0x50 -#define BLKCMP1 0x54 -#define MEDFILT 0x58 -#define RYEGAIN 0x5c -#define GRCYGAIN 0x60 -#define GBGGAIN 0x64 -#define BMGGAIN 0x68 -#define OFFSET 0x6c -#define OUTCLIP 0x70 -#define VDINT0 0x74 -#define VDINT1 0x78 -#define RSV0 0x7c -#define GAMMAWD 0x80 -#define REC656IF 0x84 -#define CCDCFG 0x88 -#define FMTCFG 0x8c -#define FMTPLEN 0x90 -#define FMTSPH 0x94 -#define FMTLNH 0x98 -#define FMTSLV 0x9c -#define FMTLNV 0xa0 -#define FMTRLEN 0xa4 -#define FMTHCNT 0xa8 -#define FMT_ADDR_PTR_B 0xac -#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) -#define FMTPGM_VF0 0xcc -#define FMTPGM_VF1 0xd0 -#define FMTPGM_AP0 0xd4 -#define FMTPGM_AP1 0xd8 -#define FMTPGM_AP2 0xdc -#define FMTPGM_AP3 0xe0 -#define FMTPGM_AP4 0xe4 -#define FMTPGM_AP5 0xe8 -#define FMTPGM_AP6 0xec -#define FMTPGM_AP7 0xf0 -#define LSCCFG1 0xf4 -#define LSCCFG2 0xf8 -#define LSCH0 0xfc -#define LSCV0 0x100 -#define LSCKH 0x104 -#define LSCKV 0x108 -#define LSCMEMCTL 0x10c -#define LSCMEMD 0x110 -#define LSCMEMQ 0x114 -#define DFCCTL 0x118 -#define DFCVSAT 0x11c -#define DFCMEMCTL 0x120 -#define DFCMEM0 0x124 -#define DFCMEM1 0x128 -#define DFCMEM2 0x12c -#define DFCMEM3 0x130 -#define DFCMEM4 0x134 -#define CSCCTL 0x138 -#define CSCM0 0x13c -#define CSCM1 0x140 -#define CSCM2 0x144 -#define CSCM3 0x148 -#define CSCM4 0x14c -#define CSCM5 0x150 -#define CSCM6 0x154 -#define CSCM7 0x158 -#define DATAOFST 0x15c -#define CCDC_REG_LAST DATAOFST -/************************************************************** -* Define for various register bit mask and shifts for CCDC -* -**************************************************************/ -#define CCDC_RAW_IP_MODE 0 -#define CCDC_VDHDOUT_INPUT 0 -#define CCDC_YCINSWP_RAW (0 << 4) -#define CCDC_EXWEN_DISABLE 0 -#define CCDC_DATAPOL_NORMAL 0 -#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 -#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) -#define CCDC_CCDCFG_WENLOG_AND 0 -#define CCDC_CCDCFG_TRGSEL_WEN 0 -#define CCDC_CCDCFG_EXTRG_DISABLE 0 -#define CCDC_CFA_MOSAIC 0 -#define CCDC_Y8POS_SHIFT 11 - -#define CCDC_VDC_DFCVSAT_MASK 0x3fff -#define CCDC_DATAOFST_MASK 0x0ff -#define CCDC_DATAOFST_H_SHIFT 0 -#define CCDC_DATAOFST_V_SHIFT 8 -#define CCDC_GAMMAWD_CFA_MASK 1 -#define CCDC_GAMMAWD_CFA_SHIFT 5 -#define CCDC_GAMMAWD_INPUT_SHIFT 2 -#define CCDC_FID_POL_MASK 1 -#define CCDC_FID_POL_SHIFT 4 -#define CCDC_HD_POL_MASK 1 -#define CCDC_HD_POL_SHIFT 3 -#define CCDC_VD_POL_MASK 1 -#define CCDC_VD_POL_SHIFT 2 -#define CCDC_VD_POL_NEGATIVE (1 << 2) -#define CCDC_FRM_FMT_MASK 1 -#define CCDC_FRM_FMT_SHIFT 7 -#define CCDC_DATA_SZ_MASK 7 -#define CCDC_DATA_SZ_SHIFT 8 -#define CCDC_VDHDOUT_MASK 1 -#define CCDC_VDHDOUT_SHIFT 0 -#define CCDC_EXWEN_MASK 1 -#define CCDC_EXWEN_SHIFT 5 -#define CCDC_INPUT_MODE_MASK 3 -#define CCDC_INPUT_MODE_SHIFT 12 -#define CCDC_PIX_FMT_MASK 3 -#define CCDC_PIX_FMT_SHIFT 12 -#define CCDC_DATAPOL_MASK 1 -#define CCDC_DATAPOL_SHIFT 6 -#define CCDC_WEN_ENABLE (1 << 1) -#define CCDC_VDHDEN_ENABLE (1 << 16) -#define CCDC_LPF_ENABLE (1 << 14) -#define CCDC_ALAW_ENABLE 1 -#define CCDC_ALAW_GAMMA_WD_MASK 7 -#define CCDC_REC656IF_BT656_EN 3 - -#define CCDC_FMTCFG_FMTMODE_MASK 3 -#define CCDC_FMTCFG_FMTMODE_SHIFT 1 -#define CCDC_FMTCFG_LNUM_MASK 3 -#define CCDC_FMTCFG_LNUM_SHIFT 4 -#define CCDC_FMTCFG_ADDRINC_MASK 7 -#define CCDC_FMTCFG_ADDRINC_SHIFT 8 - -#define CCDC_CCDCFG_FIDMD_SHIFT 6 -#define CCDC_CCDCFG_WENLOG_SHIFT 8 -#define CCDC_CCDCFG_TRGSEL_SHIFT 9 -#define CCDC_CCDCFG_EXTRG_SHIFT 10 -#define CCDC_CCDCFG_MSBINVI_SHIFT 13 - -#define CCDC_HSIZE_FLIP_SHIFT 12 -#define CCDC_HSIZE_FLIP_MASK 1 -#define CCDC_HSIZE_VAL_MASK 0xFFF -#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 -#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D -#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D -#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 -#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 -#define CCDC_START_PX_HOR_MASK 0x7FFF -#define CCDC_NUM_PX_HOR_MASK 0x7FFF -#define CCDC_START_VER_ONE_MASK 0x7FFF -#define CCDC_START_VER_TWO_MASK 0x7FFF -#define CCDC_NUM_LINES_VER 0x7FFF - -#define CCDC_BLK_CLAMP_ENABLE (1 << 15) -#define CCDC_BLK_SGAIN_MASK 0x1F -#define CCDC_BLK_ST_PXL_MASK 0x1FFF -#define CCDC_BLK_SAMPLE_LN_MASK 3 -#define CCDC_BLK_SAMPLE_LN_SHIFT 13 - -#define CCDC_NUM_LINE_CALC_MASK 3 -#define CCDC_NUM_LINE_CALC_SHIFT 14 - -#define CCDC_BLK_DC_SUB_MASK 0x3FFF -#define CCDC_BLK_COMP_MASK 0xFF -#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 -#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 -#define CCDC_BLK_COMP_R_COMP_SHIFT 8 -#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) -#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) -#define CCDC_FPC_ENABLE (1 << 15) -#define CCDC_FPC_FPC_NUM_MASK 0x7FFF -#define CCDC_DATA_PACK_ENABLE (1 << 11) -#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 -#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 -#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF -#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 -#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF -#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 -#define CCDC_VP_OUT_HORZ_ST_MASK 0xF - -#define CCDC_CSC_COEF_INTEG_MASK 7 -#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f -#define CCDC_CSC_COEF_INTEG_SHIFT 5 -#define CCDC_CSCM_MSB_SHIFT 8 -#define CCDC_CSC_ENABLE 1 -#define CCDC_CSC_DEC_MAX 32 - -#define CCDC_MFILT1_SHIFT 10 -#define CCDC_MFILT2_SHIFT 8 -#define CCDC_MED_FILT_THRESH 0x3FFF -#define CCDC_LPF_MASK 1 -#define CCDC_LPF_SHIFT 14 -#define CCDC_OFFSET_MASK 0x3FF -#define CCDC_DATASFT_MASK 7 -#define CCDC_DATASFT_SHIFT 8 - -#define CCDC_DF_ENABLE 1 - -#define CCDC_FMTPLEN_P0_MASK 0xF -#define CCDC_FMTPLEN_P1_MASK 0xF -#define CCDC_FMTPLEN_P2_MASK 7 -#define CCDC_FMTPLEN_P3_MASK 7 -#define CCDC_FMTPLEN_P0_SHIFT 0 -#define CCDC_FMTPLEN_P1_SHIFT 4 -#define CCDC_FMTPLEN_P2_SHIFT 8 -#define CCDC_FMTPLEN_P3_SHIFT 12 - -#define CCDC_FMTSPH_MASK 0x1FFF -#define CCDC_FMTLNH_MASK 0x1FFF -#define CCDC_FMTSLV_MASK 0x1FFF -#define CCDC_FMTLNV_MASK 0x7FFF -#define CCDC_FMTRLEN_MASK 0x1FFF -#define CCDC_FMTHCNT_MASK 0x1FFF - -#define CCDC_ADP_INIT_MASK 0x1FFF -#define CCDC_ADP_LINE_SHIFT 13 -#define CCDC_ADP_LINE_MASK 3 -#define CCDC_FMTPGN_APTR_MASK 7 - -#define CCDC_DFCCTL_GDFCEN_MASK 1 -#define CCDC_DFCCTL_VDFCEN_MASK 1 -#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) -#define CCDC_DFCCTL_VDFCEN_SHIFT 4 -#define CCDC_DFCCTL_VDFCSL_MASK 3 -#define CCDC_DFCCTL_VDFCSL_SHIFT 5 -#define CCDC_DFCCTL_VDFCUDA_MASK 1 -#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 -#define CCDC_DFCCTL_VDFLSFT_MASK 3 -#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 -#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 -#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 -#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 -#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 -#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) - -#define CCDC_LSCCFG_GFTSF_MASK 7 -#define CCDC_LSCCFG_GFTSF_SHIFT 1 -#define CCDC_LSCCFG_GFTINV_MASK 0xf -#define CCDC_LSCCFG_GFTINV_SHIFT 4 -#define CCDC_LSC_GFTABLE_SEL_MASK 3 -#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 -#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 -#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 -#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 -#define CCDC_LSC_GFMODE_MASK 3 -#define CCDC_LSC_GFMODE_SHIFT 4 -#define CCDC_LSC_DISABLE 0 -#define CCDC_LSC_ENABLE 1 -#define CCDC_LSC_TABLE1_SLC 0 -#define CCDC_LSC_TABLE2_SLC 1 -#define CCDC_LSC_TABLE3_SLC 2 -#define CCDC_LSC_MEMADDR_RESET (1 << 2) -#define CCDC_LSC_MEMADDR_INCR (0 << 2) -#define CCDC_LSC_FRAC_MASK_T1 0xFF -#define CCDC_LSC_INT_MASK 3 -#define CCDC_LSC_FRAC_MASK 0x3FFF -#define CCDC_LSC_CENTRE_MASK 0x3FFF -#define CCDC_LSC_COEF_MASK 0xff -#define CCDC_LSC_COEFL_SHIFT 0 -#define CCDC_LSC_COEFU_SHIFT 8 -#define CCDC_GAIN_MASK 0x7FF -#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) -#define CCDC_SYNCEN_WEN_MASK (1 << 1) -#define CCDC_SYNCEN_WEN_SHIFT 1 - -/* Power on Defaults in hardware */ -#define MODESET_DEFAULT 0x200 -#define CULH_DEFAULT 0xFFFF -#define CULV_DEFAULT 0xFF -#define GAIN_DEFAULT 256 -#define OUTCLIP_DEFAULT 0x3FFF -#define LSCCFG2_DEFAULT 0xE - -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c deleted file mode 100644 index 4a93e5ad6415..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c +++ /dev/null @@ -1,879 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - * - * CCDC hardware module for DM6446 - * ------------------------------ - * - * This module is for configuring CCD controller of DM6446 VPFE to capture - * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules - * such as Defect Pixel Correction, Color Space Conversion etc to - * pre-process the Raw Bayer RGB data, before writing it to SDRAM. - * This file is named DM644x so that other variants such DM6443 - * may be supported using the same module. - * - * TODO: Test Raw bayer parameter settings and bayer capture - * Split module parameter structure to module specific ioctl structs - * investigate if enum used for user space type definition - * to be replaced by #defines or integer - */ -#include <linux/platform_device.h> -#include <linux/uaccess.h> -#include <linux/videodev2.h> -#include <linux/gfp.h> -#include <linux/err.h> -#include <linux/module.h> - -#include "dm644x_ccdc.h" -#include <media/davinci/vpss.h> - -#include "dm644x_ccdc_regs.h" -#include "ccdc_hw_device.h" - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("CCDC Driver for DM6446"); -MODULE_AUTHOR("Texas Instruments"); - -static struct ccdc_oper_config { - struct device *dev; - /* CCDC interface type */ - enum vpfe_hw_if_type if_type; - /* Raw Bayer configuration */ - struct ccdc_params_raw bayer; - /* YCbCr configuration */ - struct ccdc_params_ycbcr ycbcr; - /* ccdc base address */ - void __iomem *base_addr; -} ccdc_cfg = { - /* Raw configurations */ - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = CCDC_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .config_params = { - .data_sz = CCDC_DATA_10BITS, - }, - }, - .ycbcr = { - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .win = CCDC_WIN_PAL, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .bt656_enable = 1, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED - }, -}; - -#define CCDC_MAX_RAW_YUV_FORMATS 2 - -/* Raw Bayer formats */ -static u32 ccdc_raw_bayer_pix_formats[] = - {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static u32 ccdc_raw_yuv_pix_formats[] = - {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* CCDC Save/Restore context */ -static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)]; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(ccdc_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, ccdc_cfg.base_addr + offset); -} - -static void ccdc_enable(int flag) -{ - regw(flag, CCDC_PCR); -} - -static void ccdc_enable_vport(int flag) -{ - if (flag) - /* enable video port */ - regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); - else - regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); -} - -/* - * ccdc_setwin() - * This function will configure the window size - * to be capture in CCDC reg - */ -static void ccdc_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, - int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int val = 0, mid_img = 0; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; - regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, - CCDC_HORZ_INFO); - - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* Since first line doesn't have any data */ - vert_start += 1; - /* configure VDINT0 */ - val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); - regw(val, CCDC_VDINT); - - } else { - /* Since first line doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* - * configure VDINT0 and VDINT1. VDINT1 will be at half - * of image height - */ - mid_img = vert_start + (image_win->height / 2); - val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | - (mid_img & CCDC_VDINT_VDINT1_MASK); - regw(val, CCDC_VDINT); - - } - regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, - CCDC_VERT_START); - regw(vert_nr_lines, CCDC_VERT_LINES); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); -} - -static void ccdc_readregs(void) -{ - unsigned int val = 0; - - val = regr(CCDC_ALAW); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val); - val = regr(CCDC_CLAMP); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val); - val = regr(CCDC_DCSUB); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val); - val = regr(CCDC_BLKCMP); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val); - val = regr(CCDC_FPC_ADDR); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val); - val = regr(CCDC_FPC); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val); - val = regr(CCDC_FMTCFG); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val); - val = regr(CCDC_COLPTN); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val); - val = regr(CCDC_FMT_HORZ); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val); - val = regr(CCDC_FMT_VERT); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val); - val = regr(CCDC_HSIZE_OFF); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val); - val = regr(CCDC_SDOFST); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val); - val = regr(CCDC_VP_OUT); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val); - val = regr(CCDC_SYN_MODE); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val); - val = regr(CCDC_HORZ_INFO); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val); - val = regr(CCDC_VERT_START); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val); - val = regr(CCDC_VERT_LINES); - dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val); -} - -static int ccdc_close(struct device *dev) -{ - return 0; -} - -/* - * ccdc_restore_defaults() - * This function will write defaults to all CCDC registers - */ -static void ccdc_restore_defaults(void) -{ - int i; - - /* disable CCDC */ - ccdc_enable(0); - /* set all registers to default value */ - for (i = 4; i <= 0x94; i += 4) - regw(0, i); - regw(CCDC_NO_CULLING, CCDC_CULLING); - regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); -} - -static int ccdc_open(struct device *device) -{ - ccdc_restore_defaults(); - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_enable_vport(1); - return 0; -} - -static void ccdc_sbl_reset(void) -{ - vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); -} - -/* - * ccdc_config_ycbcr() - * This function will configure CCDC for YCbCr video capture - */ -static void ccdc_config_ycbcr(void) -{ - struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; - u32 syn_mode; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); - /* - * first restore the CCDC registers to default values - * This is important since we assume default values to be set in - * a lot of registers that we didn't touch - */ - ccdc_restore_defaults(); - - /* - * configure pixel format, frame format, configure video frame - * format, enable output to SDRAM, enable internal timing generator - * and 8bit pack mode - */ - syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << - CCDC_SYN_MODE_INPMOD_SHIFT) | - ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << - CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | - CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); - - /* setup BT.656 sync mode */ - if (params->bt656_enable) { - regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); - - /* - * configure the FID, VD, HD pin polarity, - * fld,hd pol positive, vd negative, 8-bit data - */ - syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE; - if (ccdc_cfg.if_type == VPFE_BT656_10BIT) - syn_mode |= CCDC_SYN_MODE_10BITS; - else - syn_mode |= CCDC_SYN_MODE_8BITS; - } else { - /* y/c external sync mode */ - syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << - CCDC_FID_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << - CCDC_HD_POL_SHIFT) | - ((params->vd_pol & CCDC_VD_POL_MASK) << - CCDC_VD_POL_SHIFT)); - } - regw(syn_mode, CCDC_SYN_MODE); - - /* configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, 2); - - /* - * configure the order of y cb cr in SDRAM, and disable latch - * internal register on vsync - */ - if (ccdc_cfg.if_type == VPFE_BT656_10BIT) - regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | - CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT, - CCDC_CCDCFG); - else - regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | - CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); - - /* - * configure the horizontal line offset. This should be a - * on 32 byte boundary. So clear LSB 5 bits - */ - regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); - - /* configure the memory line offset */ - if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) - /* two fields are interleaved in memory */ - regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); - - ccdc_sbl_reset(); - dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); -} - -static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) -{ - u32 val; - - if (!bclamp->enable) { - /* configure DCSub */ - val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; - regw(val, CCDC_DCSUB); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val); - regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n"); - return; - } - /* - * Configure gain, Start pixel, No of line to be avg, - * No of pixel/line to be avg, & Enable the Black clamping - */ - val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | - ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << - CCDC_BLK_ST_PXL_SHIFT) | - ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << - CCDC_BLK_SAMPLE_LINE_SHIFT) | - ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << - CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); - regw(val, CCDC_CLAMP); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val); - /* If Black clamping is enable then make dcsub 0 */ - regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n"); -} - -static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) -{ - u32 val; - - val = ((bcomp->b & CCDC_BLK_COMP_MASK) | - ((bcomp->gb & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GB_COMP_SHIFT) | - ((bcomp->gr & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_GR_COMP_SHIFT) | - ((bcomp->r & CCDC_BLK_COMP_MASK) << - CCDC_BLK_COMP_R_COMP_SHIFT)); - regw(val, CCDC_BLKCMP); -} - -/* - * ccdc_config_raw() - * This function will configure CCDC for Raw capture mode - */ -static void ccdc_config_raw(void) -{ - struct ccdc_params_raw *params = &ccdc_cfg.bayer; - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int syn_mode = 0; - unsigned int val; - - dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); - - /* Reset CCDC */ - ccdc_restore_defaults(); - - /* Disable latching function registers on VSYNC */ - regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); - - /* - * Configure the vertical sync polarity(SYN_MODE.VDPOL), - * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity - * (SYN_MODE.FLDPOL), frame format(progressive or interlace), - * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output - * SDRAM, enable internal timing generator - */ - syn_mode = - (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | - ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | - ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | - ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | - ((config_params->data_sz & CCDC_DATA_SZ_MASK) << - CCDC_DATA_SZ_SHIFT) | - ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | - CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); - - /* Enable and configure aLaw register if needed */ - if (config_params->alaw.enable) { - val = ((config_params->alaw.gamma_wd & - CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE); - regw(val, CCDC_ALAW); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val); - } - - /* Configure video window */ - ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); - - /* Configure Black Clamp */ - ccdc_config_black_clamp(&config_params->blk_clamp); - - /* Configure Black level compensation */ - ccdc_config_black_compense(&config_params->blk_comp); - - /* If data size is 8 bit then pack the data */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - syn_mode |= CCDC_DATA_PACK_ENABLE; - - /* disable video port */ - val = CCDC_DISABLE_VIDEO_PORT; - - if (config_params->data_sz == CCDC_DATA_8BITS) - val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) - << CCDC_FMTCFG_VPIN_SHIFT; - else - val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) - << CCDC_FMTCFG_VPIN_SHIFT; - /* Write value in FMTCFG */ - regw(val, CCDC_FMTCFG); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val); - /* Configure the color pattern according to mt9t001 sensor */ - regw(CCDC_COLPTN_VAL, CCDC_COLPTN); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); - /* - * Configure Data formatter(Video port) pixel selection - * (FMT_HORZ, FMT_VERT) - */ - val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << - CCDC_FMT_HORZ_FMTSPH_SHIFT) | - (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); - regw(val, CCDC_FMT_HORZ); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val); - val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) - << CCDC_FMT_VERT_FMTSLV_SHIFT; - if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) - val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; - else - val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; - - dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n", - params->win.height); - regw(val, CCDC_FMT_VERT); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val); - - dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)..."); - - /* - * Configure Horizontal offset register. If pack 8 is enabled then - * 1 pixel will take 1 byte - */ - if ((config_params->data_sz == CCDC_DATA_8BITS) || - config_params->alaw.enable) - regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & - CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); - else - /* else one pixel will take 2 byte */ - regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + - CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, - CCDC_HSIZE_OFF); - - /* Set value for SDOFST */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_enable) { - /* For intelace inverse mode */ - regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n"); - } - - else { - /* For intelace non inverse mode */ - regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n"); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n"); - } - - /* - * Configure video port pixel selection (VPOUT) - * Here -1 is to make the height value less than FMT_VERT.FMTLNV - */ - if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) - val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) - << CCDC_VP_OUT_VERT_NUM_SHIFT; - else - val = - ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << - CCDC_VP_OUT_VERT_NUM_SHIFT; - - val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) - << CCDC_VP_OUT_HORZ_NUM_SHIFT; - val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; - regw(val, CCDC_VP_OUT); - - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val); - regw(syn_mode, CCDC_SYN_MODE); - dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); - - ccdc_sbl_reset(); - dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); - ccdc_readregs(); -} - -static int ccdc_configure(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_config_raw(); - else - ccdc_config_ycbcr(); - return 0; -} - -static int ccdc_set_buftype(enum ccdc_buftype buf_type) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.buf_type = buf_type; - else - ccdc_cfg.ycbcr.buf_type = buf_type; - return 0; -} - -static enum ccdc_buftype ccdc_get_buftype(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.buf_type; - return ccdc_cfg.ycbcr.buf_type; -} - -static int ccdc_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { - *pix = ccdc_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { - *pix = ccdc_raw_yuv_pix_formats[i]; - ret = 0; - } - } - return ret; -} - -static int ccdc_set_pixel_format(u32 pixfmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - if (pixfmt == V4L2_PIX_FMT_SBGGR8) - ccdc_cfg.bayer.config_params.alaw.enable = 1; - else if (pixfmt != V4L2_PIX_FMT_SBGGR16) - return -EINVAL; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - } - return 0; -} - -static u32 ccdc_get_pixel_format(void) -{ - struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; - u32 pixfmt; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - if (alaw->enable) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} - -static int ccdc_set_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.win = *win; - else - ccdc_cfg.ycbcr.win = *win; - return 0; -} - -static void ccdc_get_image_window(struct v4l2_rect *win) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - *win = ccdc_cfg.bayer.win; - else - *win = ccdc_cfg.ycbcr.win; -} - -static unsigned int ccdc_get_line_length(void) -{ - struct ccdc_config_params_raw *config_params = - &ccdc_cfg.bayer.config_params; - unsigned int len; - - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { - if ((config_params->alaw.enable) || - (config_params->data_sz == CCDC_DATA_8BITS)) - len = ccdc_cfg.bayer.win.width; - else - len = ccdc_cfg.bayer.win.width * 2; - } else - len = ccdc_cfg.ycbcr.win.width * 2; - return ALIGN(len, 32); -} - -static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - ccdc_cfg.bayer.frm_fmt = frm_fmt; - else - ccdc_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} - -static enum ccdc_frmfmt ccdc_get_frame_format(void) -{ - if (ccdc_cfg.if_type == VPFE_RAW_BAYER) - return ccdc_cfg.bayer.frm_fmt; - else - return ccdc_cfg.ycbcr.frm_fmt; -} - -static int ccdc_getfid(void) -{ - return (regr(CCDC_SYN_MODE) >> 15) & 1; -} - -/* misc operations */ -static inline void ccdc_setfbaddr(unsigned long addr) -{ - regw(addr & 0xffffffe0, CCDC_SDR_ADDR); -} - -static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - ccdc_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_YCBCR_SYNC_16: - case VPFE_YCBCR_SYNC_8: - case VPFE_BT656_10BIT: - ccdc_cfg.ycbcr.vd_pol = params->vdpol; - ccdc_cfg.ycbcr.hd_pol = params->hdpol; - break; - default: - /* TODO add support for raw bayer here */ - return -EINVAL; - } - return 0; -} - -static void ccdc_save_context(void) -{ - ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR); - ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE); - ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID); - ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES); - ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO); - ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START); - ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES); - ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING); - ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF); - ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST); - ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR); - ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP); - ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB); - ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN); - ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP); - ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC); - ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR); - ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT); - ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW); - ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF); - ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG); - ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG); - ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ); - ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT); - ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0); - ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1); - ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2); - ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3); - ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4); - ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5); - ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6); - ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7); - ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0); - ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1); - ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0); - ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1); - ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT); -} - -static void ccdc_restore_context(void) -{ - regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE); - regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID); - regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES); - regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO); - regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START); - regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES); - regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING); - regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF); - regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST); - regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR); - regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP); - regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB); - regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN); - regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP); - regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC); - regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR); - regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT); - regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW); - regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF); - regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG); - regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG); - regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ); - regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT); - regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0); - regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1); - regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2); - regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3); - regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4); - regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5); - regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6); - regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7); - regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0); - regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1); - regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0); - regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1); - regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT); - regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR); -} -static const struct ccdc_hw_device ccdc_hw_dev = { - .name = "DM6446 CCDC", - .owner = THIS_MODULE, - .hw_ops = { - .open = ccdc_open, - .close = ccdc_close, - .reset = ccdc_sbl_reset, - .enable = ccdc_enable, - .set_hw_if_params = ccdc_set_hw_if_params, - .configure = ccdc_configure, - .set_buftype = ccdc_set_buftype, - .get_buftype = ccdc_get_buftype, - .enum_pix = ccdc_enum_pix, - .set_pixel_format = ccdc_set_pixel_format, - .get_pixel_format = ccdc_get_pixel_format, - .set_frame_format = ccdc_set_frame_format, - .get_frame_format = ccdc_get_frame_format, - .set_image_window = ccdc_set_image_window, - .get_image_window = ccdc_get_image_window, - .get_line_length = ccdc_get_line_length, - .setfbaddr = ccdc_setfbaddr, - .getfid = ccdc_getfid, - }, -}; - -static int dm644x_ccdc_probe(struct platform_device *pdev) -{ - struct resource *res; - int status = 0; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&ccdc_hw_dev); - if (status < 0) - return status; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - status = -ENODEV; - goto fail_nores; - } - - res = request_mem_region(res->start, resource_size(res), res->name); - if (!res) { - status = -EBUSY; - goto fail_nores; - } - - ccdc_cfg.base_addr = ioremap(res->start, resource_size(res)); - if (!ccdc_cfg.base_addr) { - status = -ENOMEM; - goto fail_nomem; - } - - ccdc_cfg.dev = &pdev->dev; - printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); - return 0; -fail_nomem: - release_mem_region(res->start, resource_size(res)); -fail_nores: - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return status; -} - -static int dm644x_ccdc_remove(struct platform_device *pdev) -{ - struct resource *res; - - iounmap(ccdc_cfg.base_addr); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - vpfe_unregister_ccdc_device(&ccdc_hw_dev); - return 0; -} - -static int dm644x_ccdc_suspend(struct device *dev) -{ - /* Save CCDC context */ - ccdc_save_context(); - /* Disable CCDC */ - ccdc_enable(0); - - return 0; -} - -static int dm644x_ccdc_resume(struct device *dev) -{ - /* Restore CCDC context */ - ccdc_restore_context(); - - return 0; -} - -static const struct dev_pm_ops dm644x_ccdc_pm_ops = { - .suspend = dm644x_ccdc_suspend, - .resume = dm644x_ccdc_resume, -}; - -static struct platform_driver dm644x_ccdc_driver = { - .driver = { - .name = "dm644x_ccdc", - .pm = &dm644x_ccdc_pm_ops, - }, - .remove = dm644x_ccdc_remove, - .probe = dm644x_ccdc_probe, -}; - -module_platform_driver(dm644x_ccdc_driver); diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h deleted file mode 100644 index c20dba3d76d6..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h +++ /dev/null @@ -1,171 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - */ -#ifndef _DM644X_CCDC_H -#define _DM644X_CCDC_H -#include <media/davinci/ccdc_types.h> -#include <media/davinci/vpfe_types.h> - -/* enum for No of pixel per line to be avg. in Black Clamping*/ -enum ccdc_sample_length { - CCDC_SAMPLE_1PIXELS, - CCDC_SAMPLE_2PIXELS, - CCDC_SAMPLE_4PIXELS, - CCDC_SAMPLE_8PIXELS, - CCDC_SAMPLE_16PIXELS -}; - -/* enum for No of lines in Black Clamping */ -enum ccdc_sample_line { - CCDC_SAMPLE_1LINES, - CCDC_SAMPLE_2LINES, - CCDC_SAMPLE_4LINES, - CCDC_SAMPLE_8LINES, - CCDC_SAMPLE_16LINES -}; - -/* enum for Alaw gamma width */ -enum ccdc_gamma_width { - CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */ - CCDC_GAMMA_BITS_14_5, - CCDC_GAMMA_BITS_13_4, - CCDC_GAMMA_BITS_12_3, - CCDC_GAMMA_BITS_11_2, - CCDC_GAMMA_BITS_10_1, - CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */ -}; - -/* returns the highest bit used for the gamma */ -static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width) -{ - return 15 - width; -} - -enum ccdc_data_size { - CCDC_DATA_16BITS, - CCDC_DATA_15BITS, - CCDC_DATA_14BITS, - CCDC_DATA_13BITS, - CCDC_DATA_12BITS, - CCDC_DATA_11BITS, - CCDC_DATA_10BITS, - CCDC_DATA_8BITS -}; - -/* returns the highest bit used for this data size */ -static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz) -{ - return sz == CCDC_DATA_8BITS ? 7 : 15 - sz; -} - -/* structure for ALaw */ -struct ccdc_a_law { - /* Enable/disable A-Law */ - unsigned char enable; - /* Gamma Width Input */ - enum ccdc_gamma_width gamma_wd; -}; - -/* structure for Black Clamping */ -struct ccdc_black_clamp { - unsigned char enable; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_length sample_pixel; - /* only if bClampEnable is TRUE */ - enum ccdc_sample_line sample_ln; - /* only if bClampEnable is TRUE */ - unsigned short start_pixel; - /* only if bClampEnable is TRUE */ - unsigned short sgain; - /* only if bClampEnable is FALSE */ - unsigned short dc_sub; -}; - -/* structure for Black Level Compensation */ -struct ccdc_black_compensation { - /* Constant value to subtract from Red component */ - char r; - /* Constant value to subtract from Gr component */ - char gr; - /* Constant value to subtract from Blue component */ - char b; - /* Constant value to subtract from Gb component */ - char gb; -}; - -/* Structure for CCDC configuration parameters for raw capture mode passed - * by application - */ -struct ccdc_config_params_raw { - /* data size value from 8 to 16 bits */ - enum ccdc_data_size data_sz; - /* Structure for Optional A-Law */ - struct ccdc_a_law alaw; - /* Structure for Optical Black Clamp */ - struct ccdc_black_clamp blk_clamp; - /* Structure for Black Compensation */ - struct ccdc_black_compensation blk_comp; -}; - - -#ifdef __KERNEL__ -#include <linux/io.h> -/* Define to enable/disable video port */ -#define FP_NUM_BYTES 4 -/* Define for extra pixel/line and extra lines/frame */ -#define NUM_EXTRAPIXELS 8 -#define NUM_EXTRALINES 8 - -/* settings for commonly used video formats */ -#define CCDC_WIN_PAL {0, 0, 720, 576} -/* ntsc square pixel */ -#define CCDC_WIN_VGA {0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)} - -/* Structure for CCDC configuration parameters for raw capture mode */ -struct ccdc_params_raw { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; - /* - * enable to store the image in inverse - * order in memory(bottom to top) - */ - unsigned char image_invert_enable; - /* configurable parameters */ - struct ccdc_config_params_raw config_params; -}; - -struct ccdc_params_ycbcr { - /* pixel format */ - enum ccdc_pixfmt pix_fmt; - /* progressive or interlaced frame */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field id polarity */ - enum vpfe_pin_pol fid_pol; - /* vertical sync polarity */ - enum vpfe_pin_pol vd_pol; - /* horizontal sync polarity */ - enum vpfe_pin_pol hd_pol; - /* enable BT.656 embedded sync mode */ - int bt656_enable; - /* cb:y:cr:y or y:cb:y:cr in memory */ - enum ccdc_pixorder pix_order; - /* interleaved or separated fields */ - enum ccdc_buftype buf_type; -}; -#endif -#endif /* _DM644X_CCDC_H */ diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h deleted file mode 100644 index c4894f6a254e..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h +++ /dev/null @@ -1,140 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2006-2009 Texas Instruments Inc - */ -#ifndef _DM644X_CCDC_REGS_H -#define _DM644X_CCDC_REGS_H - -/**************************************************************************\ -* Register OFFSET Definitions -\**************************************************************************/ -#define CCDC_PID 0x0 -#define CCDC_PCR 0x4 -#define CCDC_SYN_MODE 0x8 -#define CCDC_HD_VD_WID 0xc -#define CCDC_PIX_LINES 0x10 -#define CCDC_HORZ_INFO 0x14 -#define CCDC_VERT_START 0x18 -#define CCDC_VERT_LINES 0x1c -#define CCDC_CULLING 0x20 -#define CCDC_HSIZE_OFF 0x24 -#define CCDC_SDOFST 0x28 -#define CCDC_SDR_ADDR 0x2c -#define CCDC_CLAMP 0x30 -#define CCDC_DCSUB 0x34 -#define CCDC_COLPTN 0x38 -#define CCDC_BLKCMP 0x3c -#define CCDC_FPC 0x40 -#define CCDC_FPC_ADDR 0x44 -#define CCDC_VDINT 0x48 -#define CCDC_ALAW 0x4c -#define CCDC_REC656IF 0x50 -#define CCDC_CCDCFG 0x54 -#define CCDC_FMTCFG 0x58 -#define CCDC_FMT_HORZ 0x5c -#define CCDC_FMT_VERT 0x60 -#define CCDC_FMT_ADDR0 0x64 -#define CCDC_FMT_ADDR1 0x68 -#define CCDC_FMT_ADDR2 0x6c -#define CCDC_FMT_ADDR3 0x70 -#define CCDC_FMT_ADDR4 0x74 -#define CCDC_FMT_ADDR5 0x78 -#define CCDC_FMT_ADDR6 0x7c -#define CCDC_FMT_ADDR7 0x80 -#define CCDC_PRGEVEN_0 0x84 -#define CCDC_PRGEVEN_1 0x88 -#define CCDC_PRGODD_0 0x8c -#define CCDC_PRGODD_1 0x90 -#define CCDC_VP_OUT 0x94 -#define CCDC_REG_END 0x98 - -/*************************************************************** -* Define for various register bit mask and shifts for CCDC -****************************************************************/ -#define CCDC_FID_POL_MASK 1 -#define CCDC_FID_POL_SHIFT 4 -#define CCDC_HD_POL_MASK 1 -#define CCDC_HD_POL_SHIFT 3 -#define CCDC_VD_POL_MASK 1 -#define CCDC_VD_POL_SHIFT 2 -#define CCDC_HSIZE_OFF_MASK 0xffffffe0 -#define CCDC_32BYTE_ALIGN_VAL 31 -#define CCDC_FRM_FMT_MASK 0x1 -#define CCDC_FRM_FMT_SHIFT 7 -#define CCDC_DATA_SZ_MASK 7 -#define CCDC_DATA_SZ_SHIFT 8 -#define CCDC_PIX_FMT_MASK 3 -#define CCDC_PIX_FMT_SHIFT 12 -#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF -#define CCDC_WEN_ENABLE BIT(17) -#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF -#define CCDC_VDHDEN_ENABLE BIT(16) -#define CCDC_LPF_ENABLE BIT(14) -#define CCDC_ALAW_ENABLE BIT(3) -#define CCDC_ALAW_GAMMA_WD_MASK 7 -#define CCDC_BLK_CLAMP_ENABLE BIT(31) -#define CCDC_BLK_SGAIN_MASK 0x1F -#define CCDC_BLK_ST_PXL_MASK 0x7FFF -#define CCDC_BLK_ST_PXL_SHIFT 10 -#define CCDC_BLK_SAMPLE_LN_MASK 7 -#define CCDC_BLK_SAMPLE_LN_SHIFT 28 -#define CCDC_BLK_SAMPLE_LINE_MASK 7 -#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 -#define CCDC_BLK_DC_SUB_MASK 0x03FFF -#define CCDC_BLK_COMP_MASK 0xFF -#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 -#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 -#define CCDC_BLK_COMP_R_COMP_SHIFT 24 -#define CCDC_LATCH_ON_VSYNC_DISABLE BIT(15) -#define CCDC_FPC_ENABLE BIT(15) -#define CCDC_FPC_DISABLE 0 -#define CCDC_FPC_FPC_NUM_MASK 0x7FFF -#define CCDC_DATA_PACK_ENABLE BIT(11) -#define CCDC_FMTCFG_VPIN_MASK 7 -#define CCDC_FMTCFG_VPIN_SHIFT 12 -#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF -#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 -#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF -#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 -#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF -#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 -#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF -#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 -#define CCDC_VP_OUT_HORZ_ST_MASK 0xF -#define CCDC_HORZ_INFO_SPH_SHIFT 16 -#define CCDC_VERT_START_SLV0_SHIFT 16 -#define CCDC_VDINT_VDINT0_SHIFT 16 -#define CCDC_VDINT_VDINT1_MASK 0xFFFF -#define CCDC_PPC_RAW 1 -#define CCDC_DCSUB_DEFAULT_VAL 0 -#define CCDC_CLAMP_DEFAULT_VAL 0 -#define CCDC_ENABLE_VIDEO_PORT 0x8000 -#define CCDC_DISABLE_VIDEO_PORT 0 -#define CCDC_COLPTN_VAL 0xBB11BB11 -#define CCDC_TWO_BYTES_PER_PIXEL 2 -#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D -#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 -#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 -#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 -#define CCDC_INTERLACED_HEIGHT_SHIFT 1 -#define CCDC_SYN_MODE_INPMOD_SHIFT 12 -#define CCDC_SYN_MODE_INPMOD_MASK 3 -#define CCDC_SYN_MODE_8BITS (7 << 8) -#define CCDC_SYN_MODE_10BITS (6 << 8) -#define CCDC_SYN_MODE_11BITS (5 << 8) -#define CCDC_SYN_MODE_12BITS (4 << 8) -#define CCDC_SYN_MODE_13BITS (3 << 8) -#define CCDC_SYN_MODE_14BITS (2 << 8) -#define CCDC_SYN_MODE_15BITS (1 << 8) -#define CCDC_SYN_MODE_16BITS (0 << 8) -#define CCDC_SYN_FLDMODE_MASK 1 -#define CCDC_SYN_FLDMODE_SHIFT 7 -#define CCDC_REC656IF_BT656_EN 3 -#define CCDC_SYN_MODE_VD_POL_NEGATIVE BIT(2) -#define CCDC_CCDCFG_Y8POS_SHIFT 11 -#define CCDC_CCDCFG_BW656_10BIT BIT(5) -#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 -#define CCDC_NO_CULLING 0xffff00ff -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.c b/drivers/staging/media/deprecated/vpfe_capture/isif.c deleted file mode 100644 index 4059891c2824..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif.c +++ /dev/null @@ -1,1127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * Image Sensor Interface (ISIF) driver - * - * This driver is for configuring the ISIF IP available on DM365 or any other - * TI SoCs. This is used for capturing yuv or bayer video or image data - * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 - * and DM6446, but with enhanced or additional ip blocks. The driver - * configures the ISIF upon commands from the vpfe bridge driver through - * ccdc_hw_device interface. - * - * TODO: 1) Raw bayer parameter settings and bayer capture - * 2) Add support for control ioctl - */ -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/uaccess.h> -#include <linux/io.h> -#include <linux/videodev2.h> -#include <linux/err.h> -#include <linux/module.h> - -#include "isif.h" -#include <media/davinci/vpss.h> - -#include "isif_regs.h" -#include "ccdc_hw_device.h" - -/* Defaults for module configuration parameters */ -static const struct isif_config_params_raw isif_config_defaults = { - .linearize = { - .en = 0, - .corr_shft = ISIF_NO_SHIFT, - .scale_fact = {1, 0}, - }, - .df_csc = { - .df_or_csc = 0, - .csc = { - .en = 0, - }, - }, - .dfc = { - .en = 0, - }, - .bclamp = { - .en = 0, - }, - .gain_offset = { - .gain = { - .r_ye = {1, 0}, - .gr_cy = {1, 0}, - .gb_g = {1, 0}, - .b_mg = {1, 0}, - }, - }, - .culling = { - .hcpat_odd = 0xff, - .hcpat_even = 0xff, - .vcpat = 0xff, - }, - .compress = { - .alg = ISIF_ALAW, - }, -}; - -/* ISIF operation configuration */ -static struct isif_oper_config { - struct device *dev; - enum vpfe_hw_if_type if_type; - struct isif_ycbcr_config ycbcr; - struct isif_params_raw bayer; - enum isif_data_pack data_pack; - /* ISIF base address */ - void __iomem *base_addr; - /* ISIF Linear Table 0 */ - void __iomem *linear_tbl0_addr; - /* ISIF Linear Table 1 */ - void __iomem *linear_tbl1_addr; -} isif_cfg = { - .ycbcr = { - .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, - .frm_fmt = CCDC_FRMFMT_INTERLACED, - .win = ISIF_WIN_NTSC, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .pix_order = CCDC_PIXORDER_CBYCRY, - .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, - }, - .bayer = { - .pix_fmt = CCDC_PIXFMT_RAW, - .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, - .win = ISIF_WIN_VGA, - .fid_pol = VPFE_PINPOL_POSITIVE, - .vd_pol = VPFE_PINPOL_POSITIVE, - .hd_pol = VPFE_PINPOL_POSITIVE, - .gain = { - .r_ye = {1, 0}, - .gr_cy = {1, 0}, - .gb_g = {1, 0}, - .b_mg = {1, 0}, - }, - .cfa_pat = ISIF_CFA_PAT_MOSAIC, - .data_msb = ISIF_BIT_MSB_11, - .config_params = { - .data_shift = ISIF_NO_SHIFT, - .col_pat_field0 = { - .olop = ISIF_GREEN_BLUE, - .olep = ISIF_BLUE, - .elop = ISIF_RED, - .elep = ISIF_GREEN_RED, - }, - .col_pat_field1 = { - .olop = ISIF_GREEN_BLUE, - .olep = ISIF_BLUE, - .elop = ISIF_RED, - .elep = ISIF_GREEN_RED, - }, - .test_pat_gen = 0, - }, - }, - .data_pack = ISIF_DATA_PACK8, -}; - -/* Raw Bayer formats */ -static const u32 isif_raw_bayer_pix_formats[] = { - V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; - -/* Raw YUV formats */ -static const u32 isif_raw_yuv_pix_formats[] = { - V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; - -/* register access routines */ -static inline u32 regr(u32 offset) -{ - return __raw_readl(isif_cfg.base_addr + offset); -} - -static inline void regw(u32 val, u32 offset) -{ - __raw_writel(val, isif_cfg.base_addr + offset); -} - -/* reg_modify() - read, modify and write register */ -static inline u32 reg_modify(u32 mask, u32 val, u32 offset) -{ - u32 new_val = (regr(offset) & ~mask) | (val & mask); - - regw(new_val, offset); - return new_val; -} - -static inline void regw_lin_tbl(u32 val, u32 offset, int i) -{ - if (!i) - __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); - else - __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); -} - -static void isif_disable_all_modules(void) -{ - /* disable BC */ - regw(0, CLAMPCFG); - /* disable vdfc */ - regw(0, DFCCTL); - /* disable CSC */ - regw(0, CSCCTL); - /* disable linearization */ - regw(0, LINCFG0); - /* disable other modules here as they are supported */ -} - -static void isif_enable(int en) -{ - if (!en) { - /* Before disable isif, disable all ISIF modules */ - isif_disable_all_modules(); - /* - * wait for next VD. Assume lowest scan rate is 12 Hz. So - * 100 msec delay is good enough - */ - msleep(100); - } - reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); -} - -static void isif_enable_output_to_sdram(int en) -{ - reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); -} - -static void isif_config_culling(struct isif_cul *cul) -{ - u32 val; - - /* Horizontal pattern */ - val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; - regw(val, CULH); - - /* vertical pattern */ - regw(cul->vcpat, CULV); - - /* LPF */ - reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, - cul->en_lpf << ISIF_LPF_SHIFT, MODESET); -} - -static void isif_config_gain_offset(void) -{ - struct isif_gain_offsets_adj *gain_off_p = - &isif_cfg.bayer.config_params.gain_offset; - u32 val; - - val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | - (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | - (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | - (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | - (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | - (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); - - reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); - - val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.r_ye.decimal; - regw(val, CRGAIN); - - val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.gr_cy.decimal; - regw(val, CGRGAIN); - - val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.gb_g.decimal; - regw(val, CGBGAIN); - - val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | - gain_off_p->gain.b_mg.decimal; - regw(val, CBGAIN); - - regw(gain_off_p->offset, COFSTA); -} - -static void isif_restore_defaults(void) -{ - enum vpss_ccdc_source_sel source = VPSS_CCDCIN; - - dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); - isif_cfg.bayer.config_params = isif_config_defaults; - /* Enable clock to ISIF, IPIPEIF and BL */ - vpss_enable_clock(VPSS_CCDC_CLOCK, 1); - vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); - vpss_enable_clock(VPSS_BL_CLOCK, 1); - /* Set default offset and gain */ - isif_config_gain_offset(); - vpss_select_ccdc_source(source); - dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); -} - -static int isif_open(struct device *device) -{ - isif_restore_defaults(); - return 0; -} - -/* This function will configure the window size to be capture in ISIF reg */ -static void isif_setwin(struct v4l2_rect *image_win, - enum ccdc_frmfmt frm_fmt, int ppc) -{ - int horz_start, horz_nr_pixels; - int vert_start, vert_nr_lines; - int mid_img = 0; - - dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); - /* - * ppc - per pixel count. indicates how many pixels per cell - * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. - * raw capture this is 1 - */ - horz_start = image_win->left << (ppc - 1); - horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; - - /* Writing the horizontal info into the registers */ - regw(horz_start & START_PX_HOR_MASK, SPH); - regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); - vert_start = image_win->top; - - if (frm_fmt == CCDC_FRMFMT_INTERLACED) { - vert_nr_lines = (image_win->height >> 1) - 1; - vert_start >>= 1; - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - } else { - /* To account for VD since line 0 doesn't have any data */ - vert_start += 1; - vert_nr_lines = image_win->height - 1; - /* configure VDINT0 and VDINT1 */ - mid_img = vert_start + (image_win->height / 2); - regw(mid_img, VDINT1); - } - - regw(0, VDINT0); - regw(vert_start & START_VER_ONE_MASK, SLV0); - regw(vert_start & START_VER_TWO_MASK, SLV1); - regw(vert_nr_lines & NUM_LINES_VER, LNV); -} - -static void isif_config_bclamp(struct isif_black_clamp *bc) -{ - u32 val; - - /* - * DC Offset is always added to image data irrespective of bc enable - * status - */ - regw(bc->dc_offset, CLDCOFST); - - if (bc->en) { - val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; - - /* Enable BC and horizontal clamp calculation parameters */ - val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); - - regw(val, CLAMPCFG); - - if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { - /* - * Window count for calculation - * Base window selection - * pixel limit - * Horizontal size of window - * vertical size of the window - * Horizontal start position of the window - * Vertical start position of the window - */ - val = bc->horz.win_count_calc | - ((!!bc->horz.base_win_sel_calc) << - ISIF_HORZ_BC_WIN_SEL_SHIFT) | - ((!!bc->horz.clamp_pix_limit) << - ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | - (bc->horz.win_h_sz_calc << - ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | - (bc->horz.win_v_sz_calc << - ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); - regw(val, CLHWIN0); - - regw(bc->horz.win_start_h_calc, CLHWIN1); - regw(bc->horz.win_start_v_calc, CLHWIN2); - } - - /* vertical clamp calculation parameters */ - - /* Reset clamp value sel for previous line */ - val |= - (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | - (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); - regw(val, CLVWIN0); - - /* Optical Black horizontal start position */ - regw(bc->vert.ob_start_h, CLVWIN1); - /* Optical Black vertical start position */ - regw(bc->vert.ob_start_v, CLVWIN2); - /* Optical Black vertical size for calculation */ - regw(bc->vert.ob_v_sz_calc, CLVWIN3); - /* Vertical start position for BC subtraction */ - regw(bc->vert_start_sub, CLSV); - } -} - -static void isif_config_linearization(struct isif_linearize *linearize) -{ - u32 val, i; - - if (!linearize->en) { - regw(0, LINCFG0); - return; - } - - /* shift value for correction & enable linearization (set lsb) */ - val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; - regw(val, LINCFG0); - - /* Scale factor */ - val = ((!!linearize->scale_fact.integer) << - ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | - linearize->scale_fact.decimal; - regw(val, LINCFG1); - - for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { - if (i % 2) - regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); - else - regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); - } -} - -static int isif_config_dfc(struct isif_dfc *vdfc) -{ - /* initialize retries to loop for max ~ 250 usec */ - u32 val, count, retries = loops_per_jiffy / (4000/HZ); - int i; - - if (!vdfc->en) - return 0; - - /* Correction mode */ - val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); - - /* Correct whole line or partial */ - if (vdfc->corr_whole_line) - val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; - - /* level shift value */ - val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; - - regw(val, DFCCTL); - - /* Defect saturation level */ - regw(vdfc->def_sat_level, VDFSATLV); - - regw(vdfc->table[0].pos_vert, DFCMEM0); - regw(vdfc->table[0].pos_horz, DFCMEM1); - if (vdfc->corr_mode == ISIF_VDFC_NORMAL || - vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - regw(vdfc->table[0].level_at_pos, DFCMEM2); - regw(vdfc->table[0].level_up_pixels, DFCMEM3); - regw(vdfc->table[0].level_low_pixels, DFCMEM4); - } - - /* set DFCMARST and set DFCMWR */ - val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; - regw(val, DFCMEMCTL); - - count = retries; - while (count && (regr(DFCMEMCTL) & 0x1)) - count--; - - if (!count) { - dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); - return -1; - } - - for (i = 1; i < vdfc->num_vdefects; i++) { - regw(vdfc->table[i].pos_vert, DFCMEM0); - regw(vdfc->table[i].pos_horz, DFCMEM1); - if (vdfc->corr_mode == ISIF_VDFC_NORMAL || - vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { - regw(vdfc->table[i].level_at_pos, DFCMEM2); - regw(vdfc->table[i].level_up_pixels, DFCMEM3); - regw(vdfc->table[i].level_low_pixels, DFCMEM4); - } - val = regr(DFCMEMCTL); - /* clear DFCMARST and set DFCMWR */ - val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); - val |= 1; - regw(val, DFCMEMCTL); - - count = retries; - while (count && (regr(DFCMEMCTL) & 0x1)) - count--; - - if (!count) { - dev_err(isif_cfg.dev, - "defect table write timeout !!!\n"); - return -1; - } - } - if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { - /* Extra cycle needed */ - regw(0, DFCMEM0); - regw(0x1FFF, DFCMEM1); - regw(1, DFCMEMCTL); - } - - /* enable VDFC */ - reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), - DFCCTL); - return 0; -} - -static void isif_config_csc(struct isif_df_csc *df_csc) -{ - u32 val1 = 0, val2 = 0, i; - - if (!df_csc->csc.en) { - regw(0, CSCCTL); - return; - } - for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { - if ((i % 2) == 0) { - /* CSCM - LSB */ - val1 = (df_csc->csc.coeff[i].integer << - ISIF_CSC_COEF_INTEG_SHIFT) | - df_csc->csc.coeff[i].decimal; - } else { - - /* CSCM - MSB */ - val2 = (df_csc->csc.coeff[i].integer << - ISIF_CSC_COEF_INTEG_SHIFT) | - df_csc->csc.coeff[i].decimal; - val2 <<= ISIF_CSCM_MSB_SHIFT; - val2 |= val1; - regw(val2, (CSCM0 + ((i - 1) << 1))); - } - } - - /* program the active area */ - regw(df_csc->start_pix, FMTSPH); - /* - * one extra pixel as required for CSC. Actually number of - * pixel - 1 should be configured in this register. So we - * need to subtract 1 before writing to FMTSPH, but we will - * not do this since csc requires one extra pixel - */ - regw(df_csc->num_pixels, FMTLNH); - regw(df_csc->start_line, FMTSLV); - /* - * one extra line as required for CSC. See reason documented for - * num_pixels - */ - regw(df_csc->num_lines, FMTLNV); - - /* Enable CSC */ - regw(1, CSCCTL); -} - -static int isif_config_raw(void) -{ - struct isif_params_raw *params = &isif_cfg.bayer; - struct isif_config_params_raw *module_params = - &isif_cfg.bayer.config_params; - struct vpss_pg_frame_size frame_size; - struct vpss_sync_pol sync; - u32 val; - - dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); - - /* - * Configure CCDCFG register:- - * Set CCD Not to swap input since input is RAW data - * Set FID detection function to Latch at V-Sync - * Set WENLOG - isif valid area - * Set TRGSEL - * Set EXTRG - * Packed to 8 or 16 bits - */ - - val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | - ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | - ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; - - dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); - regw(val, CCDCFG); - - /* - * Configure the vertical sync polarity(MODESET.VDPOL) - * Configure the horizontal sync polarity (MODESET.HDPOL) - * Configure frame id polarity (MODESET.FLDPOL) - * Configure data polarity - * Configure External WEN Selection - * Configure frame format(progressive or interlace) - * Configure pixel format (Input mode) - * Configure the data shift - */ - - val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | - (params->hd_pol << ISIF_HD_POL_SHIFT) | - (params->fid_pol << ISIF_FID_POL_SHIFT) | - (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | - (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | - (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | - (params->pix_fmt << ISIF_INPUT_SHIFT) | - (params->config_params.data_shift << ISIF_DATASFT_SHIFT); - - regw(val, MODESET); - dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); - - /* - * Configure GAMMAWD register - * CFA pattern setting - */ - val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; - - /* Gamma msb */ - if (module_params->compress.alg == ISIF_ALAW) - val |= ISIF_ALAW_ENABLE; - - val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT); - regw(val, CGAMMAWD); - - /* Configure DPCM compression settings */ - if (module_params->compress.alg == ISIF_DPCM) { - val = BIT(ISIF_DPCM_EN_SHIFT) | - (module_params->compress.pred << - ISIF_DPCM_PREDICTOR_SHIFT); - } - - regw(val, MISC); - - /* Configure Gain & Offset */ - isif_config_gain_offset(); - - /* Configure Color pattern */ - val = (params->config_params.col_pat_field0.olop) | - (params->config_params.col_pat_field0.olep << 2) | - (params->config_params.col_pat_field0.elop << 4) | - (params->config_params.col_pat_field0.elep << 6) | - (params->config_params.col_pat_field1.olop << 8) | - (params->config_params.col_pat_field1.olep << 10) | - (params->config_params.col_pat_field1.elop << 12) | - (params->config_params.col_pat_field1.elep << 14); - regw(val, CCOLP); - dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); - - /* Configure HSIZE register */ - val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; - - /* calculate line offset in 32 bytes based on pack value */ - if (isif_cfg.data_pack == ISIF_PACK_8BIT) - val |= ((params->win.width + 31) >> 5); - else if (isif_cfg.data_pack == ISIF_PACK_12BIT) - val |= (((params->win.width + - (params->win.width >> 2)) + 31) >> 5); - else - val |= (((params->win.width * 2) + 31) >> 5); - regw(val, HSIZE); - - /* Configure SDOFST register */ - if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { - if (params->image_invert_en) { - /* For interlace inverse mode */ - regw(0x4B6D, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); - } else { - /* For interlace non inverse mode */ - regw(0x0B6D, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); - } - } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { - if (params->image_invert_en) { - /* For progressive inverse mode */ - regw(0x4000, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); - } else { - /* For progressive non inverse mode */ - regw(0x0000, SDOFST); - dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); - } - } - - /* Configure video window */ - isif_setwin(¶ms->win, params->frm_fmt, 1); - - /* Configure Black Clamp */ - isif_config_bclamp(&module_params->bclamp); - - /* Configure Vertical Defection Pixel Correction */ - if (isif_config_dfc(&module_params->dfc) < 0) - return -EFAULT; - - if (!module_params->df_csc.df_or_csc) - /* Configure Color Space Conversion */ - isif_config_csc(&module_params->df_csc); - - isif_config_linearization(&module_params->linearize); - - /* Configure Culling */ - isif_config_culling(&module_params->culling); - - /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ - regw(module_params->horz_offset, DATAHOFST); - regw(module_params->vert_offset, DATAVOFST); - - /* Setup test pattern if enabled */ - if (params->config_params.test_pat_gen) { - /* Use the HD/VD pol settings from user */ - sync.ccdpg_hdpol = params->hd_pol; - sync.ccdpg_vdpol = params->vd_pol; - dm365_vpss_set_sync_pol(sync); - frame_size.hlpfr = isif_cfg.bayer.win.width; - frame_size.pplen = isif_cfg.bayer.win.height; - dm365_vpss_set_pg_frame_size(frame_size); - vpss_select_ccdc_source(VPSS_PGLPBK); - } - - dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); - return 0; -} - -static int isif_set_buftype(enum ccdc_buftype buf_type) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - isif_cfg.bayer.buf_type = buf_type; - else - isif_cfg.ycbcr.buf_type = buf_type; - - return 0; - -} -static enum ccdc_buftype isif_get_buftype(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_cfg.bayer.buf_type; - - return isif_cfg.ycbcr.buf_type; -} - -static int isif_enum_pix(u32 *pix, int i) -{ - int ret = -EINVAL; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { - *pix = isif_raw_bayer_pix_formats[i]; - ret = 0; - } - } else { - if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { - *pix = isif_raw_yuv_pix_formats[i]; - ret = 0; - } - } - - return ret; -} - -static int isif_set_pixel_format(unsigned int pixfmt) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (pixfmt == V4L2_PIX_FMT_SBGGR8) { - if ((isif_cfg.bayer.config_params.compress.alg != - ISIF_ALAW) && - (isif_cfg.bayer.config_params.compress.alg != - ISIF_DPCM)) { - dev_dbg(isif_cfg.dev, - "Either configure A-Law or DPCM\n"); - return -EINVAL; - } - isif_cfg.data_pack = ISIF_PACK_8BIT; - } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { - isif_cfg.bayer.config_params.compress.alg = - ISIF_NO_COMPRESSION; - isif_cfg.data_pack = ISIF_PACK_16BIT; - } else - return -EINVAL; - isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - } else { - if (pixfmt == V4L2_PIX_FMT_YUYV) - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; - else if (pixfmt == V4L2_PIX_FMT_UYVY) - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - else - return -EINVAL; - isif_cfg.data_pack = ISIF_PACK_8BIT; - } - return 0; -} - -static u32 isif_get_pixel_format(void) -{ - u32 pixfmt; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) - if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || - isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) - pixfmt = V4L2_PIX_FMT_SBGGR8; - else - pixfmt = V4L2_PIX_FMT_SBGGR16; - else { - if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) - pixfmt = V4L2_PIX_FMT_YUYV; - else - pixfmt = V4L2_PIX_FMT_UYVY; - } - return pixfmt; -} - -static int isif_set_image_window(struct v4l2_rect *win) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - isif_cfg.bayer.win.top = win->top; - isif_cfg.bayer.win.left = win->left; - isif_cfg.bayer.win.width = win->width; - isif_cfg.bayer.win.height = win->height; - } else { - isif_cfg.ycbcr.win.top = win->top; - isif_cfg.ycbcr.win.left = win->left; - isif_cfg.ycbcr.win.width = win->width; - isif_cfg.ycbcr.win.height = win->height; - } - return 0; -} - -static void isif_get_image_window(struct v4l2_rect *win) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - *win = isif_cfg.bayer.win; - else - *win = isif_cfg.ycbcr.win; -} - -static unsigned int isif_get_line_length(void) -{ - unsigned int len; - - if (isif_cfg.if_type == VPFE_RAW_BAYER) { - if (isif_cfg.data_pack == ISIF_PACK_8BIT) - len = ((isif_cfg.bayer.win.width)); - else if (isif_cfg.data_pack == ISIF_PACK_12BIT) - len = (((isif_cfg.bayer.win.width * 2) + - (isif_cfg.bayer.win.width >> 2))); - else - len = (((isif_cfg.bayer.win.width * 2))); - } else - len = (((isif_cfg.ycbcr.win.width * 2))); - return ALIGN(len, 32); -} - -static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - isif_cfg.bayer.frm_fmt = frm_fmt; - else - isif_cfg.ycbcr.frm_fmt = frm_fmt; - return 0; -} -static enum ccdc_frmfmt isif_get_frame_format(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_cfg.bayer.frm_fmt; - return isif_cfg.ycbcr.frm_fmt; -} - -static int isif_getfid(void) -{ - return (regr(MODESET) >> 15) & 0x1; -} - -/* misc operations */ -static void isif_setfbaddr(unsigned long addr) -{ - regw((addr >> 21) & 0x07ff, CADU); - regw((addr >> 5) & 0x0ffff, CADL); -} - -static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) -{ - isif_cfg.if_type = params->if_type; - - switch (params->if_type) { - case VPFE_BT656: - case VPFE_BT656_10BIT: - case VPFE_YCBCR_SYNC_8: - isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - break; - case VPFE_BT1120: - case VPFE_YCBCR_SYNC_16: - isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; - isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; - break; - case VPFE_RAW_BAYER: - isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; - break; - default: - dev_dbg(isif_cfg.dev, "Invalid interface type\n"); - return -EINVAL; - } - - return 0; -} - -/* This function will configure ISIF for YCbCr parameters. */ -static int isif_config_ycbcr(void) -{ - struct isif_ycbcr_config *params = &isif_cfg.ycbcr; - u32 modeset = 0, ccdcfg = 0; - - dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); - - /* configure pixel format or input mode */ - modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | - (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | - (params->fid_pol << ISIF_FID_POL_SHIFT) | - (params->hd_pol << ISIF_HD_POL_SHIFT) | - (params->vd_pol << ISIF_VD_POL_SHIFT); - - /* pack the data to 8-bit ISIFCFG */ - switch (isif_cfg.if_type) { - case VPFE_BT656: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); - regw(3, REC656IF); - ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; - break; - case VPFE_BT656_10BIT: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - /* setup BT.656, embedded sync */ - regw(3, REC656IF); - /* enable 10 bit mode in ccdcfg */ - ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | - ISIF_BW656_ENABLE; - break; - case VPFE_BT1120: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - regw(3, REC656IF); - break; - - case VPFE_YCBCR_SYNC_8: - ccdcfg |= ISIF_DATA_PACK8; - ccdcfg |= ISIF_YCINSWP_YCBCR; - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - case VPFE_YCBCR_SYNC_16: - if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { - dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); - return -EINVAL; - } - break; - default: - /* should never come here */ - dev_dbg(isif_cfg.dev, "Invalid interface type\n"); - return -EINVAL; - } - - regw(modeset, MODESET); - - /* Set up pix order */ - ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; - - regw(ccdcfg, CCDCFG); - - /* configure video window */ - if ((isif_cfg.if_type == VPFE_BT1120) || - (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) - isif_setwin(¶ms->win, params->frm_fmt, 1); - else - isif_setwin(¶ms->win, params->frm_fmt, 2); - - /* - * configure the horizontal line offset - * this is done by rounding up width to a multiple of 16 pixels - * and multiply by two to account for y:cb:cr 4:2:2 data - */ - regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); - - /* configure the memory line offset */ - if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && - (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) - /* two fields are interleaved in memory */ - regw(0x00000249, SDOFST); - - return 0; -} - -static int isif_configure(void) -{ - if (isif_cfg.if_type == VPFE_RAW_BAYER) - return isif_config_raw(); - return isif_config_ycbcr(); -} - -static int isif_close(struct device *device) -{ - /* copy defaults to module params */ - isif_cfg.bayer.config_params = isif_config_defaults; - return 0; -} - -static const struct ccdc_hw_device isif_hw_dev = { - .name = "ISIF", - .owner = THIS_MODULE, - .hw_ops = { - .open = isif_open, - .close = isif_close, - .enable = isif_enable, - .enable_out_to_sdram = isif_enable_output_to_sdram, - .set_hw_if_params = isif_set_hw_if_params, - .configure = isif_configure, - .set_buftype = isif_set_buftype, - .get_buftype = isif_get_buftype, - .enum_pix = isif_enum_pix, - .set_pixel_format = isif_set_pixel_format, - .get_pixel_format = isif_get_pixel_format, - .set_frame_format = isif_set_frame_format, - .get_frame_format = isif_get_frame_format, - .set_image_window = isif_set_image_window, - .get_image_window = isif_get_image_window, - .get_line_length = isif_get_line_length, - .setfbaddr = isif_setfbaddr, - .getfid = isif_getfid, - }, -}; - -static int isif_probe(struct platform_device *pdev) -{ - void (*setup_pinmux)(void); - struct resource *res; - void __iomem *addr; - int status = 0, i; - - /* Platform data holds setup_pinmux function ptr */ - if (!pdev->dev.platform_data) - return -ENODEV; - - /* - * first try to register with vpfe. If not correct platform, then we - * don't have to iomap - */ - status = vpfe_register_ccdc_device(&isif_hw_dev); - if (status < 0) - return status; - - setup_pinmux = pdev->dev.platform_data; - /* - * setup Mux configuration for ccdc which may be different for - * different SoCs using this CCDC - */ - setup_pinmux(); - - i = 0; - /* Get the ISIF base address, linearization table0 and table1 addr. */ - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) { - status = -ENODEV; - goto fail_nobase_res; - } - res = request_mem_region(res->start, resource_size(res), - res->name); - if (!res) { - status = -EBUSY; - goto fail_nobase_res; - } - addr = ioremap(res->start, resource_size(res)); - if (!addr) { - status = -ENOMEM; - goto fail_base_iomap; - } - switch (i) { - case 0: - /* ISIF base address */ - isif_cfg.base_addr = addr; - break; - case 1: - /* ISIF linear tbl0 address */ - isif_cfg.linear_tbl0_addr = addr; - break; - default: - /* ISIF linear tbl0 address */ - isif_cfg.linear_tbl1_addr = addr; - break; - } - i++; - } - isif_cfg.dev = &pdev->dev; - - printk(KERN_NOTICE "%s is registered with vpfe.\n", - isif_hw_dev.name); - return 0; -fail_base_iomap: - release_mem_region(res->start, resource_size(res)); - i--; -fail_nobase_res: - if (isif_cfg.base_addr) { - iounmap(isif_cfg.base_addr); - isif_cfg.base_addr = NULL; - } - if (isif_cfg.linear_tbl0_addr) { - iounmap(isif_cfg.linear_tbl0_addr); - isif_cfg.linear_tbl0_addr = NULL; - } - - while (i >= 0) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (res) - release_mem_region(res->start, resource_size(res)); - i--; - } - vpfe_unregister_ccdc_device(&isif_hw_dev); - return status; -} - -static int isif_remove(struct platform_device *pdev) -{ - struct resource *res; - int i = 0; - - iounmap(isif_cfg.base_addr); - isif_cfg.base_addr = NULL; - iounmap(isif_cfg.linear_tbl0_addr); - isif_cfg.linear_tbl0_addr = NULL; - iounmap(isif_cfg.linear_tbl1_addr); - isif_cfg.linear_tbl1_addr = NULL; - while (i < 3) { - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - release_mem_region(res->start, resource_size(res)); - i++; - } - vpfe_unregister_ccdc_device(&isif_hw_dev); - return 0; -} - -static struct platform_driver isif_driver = { - .driver = { - .name = "isif", - }, - .remove = isif_remove, - .probe = isif_probe, -}; - -module_platform_driver(isif_driver); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.h b/drivers/staging/media/deprecated/vpfe_capture/isif.h deleted file mode 100644 index 8369acd26e7e..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif.h +++ /dev/null @@ -1,518 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * isif header file - */ -#ifndef _ISIF_H -#define _ISIF_H - -#include <media/davinci/ccdc_types.h> -#include <media/davinci/vpfe_types.h> - -/* isif float type S8Q8/U8Q8 */ -struct isif_float_8 { - /* 8 bit integer part */ - __u8 integer; - /* 8 bit decimal part */ - __u8 decimal; -}; - -/* isif float type U16Q16/S16Q16 */ -struct isif_float_16 { - /* 16 bit integer part */ - __u16 integer; - /* 16 bit decimal part */ - __u16 decimal; -}; - -/************************************************************************ - * Vertical Defect Correction parameters - ***********************************************************************/ -/* Defect Correction (DFC) table entry */ -struct isif_vdfc_entry { - /* vertical position of defect */ - __u16 pos_vert; - /* horizontal position of defect */ - __u16 pos_horz; - /* - * Defect level of Vertical line defect position. This is subtracted - * from the data at the defect position - */ - __u8 level_at_pos; - /* - * Defect level of the pixels upper than the vertical line defect. - * This is subtracted from the data - */ - __u8 level_up_pixels; - /* - * Defect level of the pixels lower than the vertical line defect. - * This is subtracted from the data - */ - __u8 level_low_pixels; -}; - -#define ISIF_VDFC_TABLE_SIZE 8 -struct isif_dfc { - /* enable vertical defect correction */ - __u8 en; - /* Defect level subtraction. Just fed through if saturating */ -#define ISIF_VDFC_NORMAL 0 - /* - * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2 - * if data saturating - */ -#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1 - /* Horizontal interpolation (((i-2)+(i+2))/2) */ -#define ISIF_VDFC_HORZ_INTERPOL 2 - /* one of the vertical defect correction modes above */ - __u8 corr_mode; - /* 0 - whole line corrected, 1 - not pixels upper than the defect */ - __u8 corr_whole_line; -#define ISIF_VDFC_NO_SHIFT 0 -#define ISIF_VDFC_SHIFT_1 1 -#define ISIF_VDFC_SHIFT_2 2 -#define ISIF_VDFC_SHIFT_3 3 -#define ISIF_VDFC_SHIFT_4 4 - /* - * defect level shift value. level_at_pos, level_upper_pos, - * and level_lower_pos can be shifted up by this value. Choose - * one of the values above - */ - __u8 def_level_shift; - /* defect saturation level */ - __u16 def_sat_level; - /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */ - __u16 num_vdefects; - /* VDFC table ptr */ - struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE]; -}; - -struct isif_horz_bclamp { - - /* Horizontal clamp disabled. Only vertical clamp value is subtracted */ -#define ISIF_HORZ_BC_DISABLE 0 - /* - * Horizontal clamp value is calculated and subtracted from image data - * along with vertical clamp value - */ -#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1 - /* - * Horizontal clamp value calculated from previous image is subtracted - * from image data along with vertical clamp value. - */ -#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2 - /* horizontal clamp mode. One of the values above */ - __u8 mode; - /* - * pixel value limit enable. - * 0 - limit disabled - * 1 - pixel value limited to 1023 - */ - __u8 clamp_pix_limit; - /* Select Most left window for bc calculation */ -#define ISIF_SEL_MOST_LEFT_WIN 0 - /* Select Most right window for bc calculation */ -#define ISIF_SEL_MOST_RIGHT_WIN 1 - /* Select most left or right window for clamp val calculation */ - __u8 base_win_sel_calc; - /* Window count per color for calculation. range 1-32 */ - __u8 win_count_calc; - /* Window start position - horizontal for calculation. 0 - 8191 */ - __u16 win_start_h_calc; - /* Window start position - vertical for calculation 0 - 8191 */ - __u16 win_start_v_calc; -#define ISIF_HORZ_BC_SZ_H_2PIXELS 0 -#define ISIF_HORZ_BC_SZ_H_4PIXELS 1 -#define ISIF_HORZ_BC_SZ_H_8PIXELS 2 -#define ISIF_HORZ_BC_SZ_H_16PIXELS 3 - /* Width of the sample window in pixels for calculation */ - __u8 win_h_sz_calc; -#define ISIF_HORZ_BC_SZ_V_32PIXELS 0 -#define ISIF_HORZ_BC_SZ_V_64PIXELS 1 -#define ISIF_HORZ_BC_SZ_V_128PIXELS 2 -#define ISIF_HORZ_BC_SZ_V_256PIXELS 3 - /* Height of the sample window in pixels for calculation */ - __u8 win_v_sz_calc; -}; - -/************************************************************************ - * Black Clamp parameters - ***********************************************************************/ -struct isif_vert_bclamp { - /* Reset value used is the clamp value calculated */ -#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0 - /* Reset value used is reset_clamp_val configured */ -#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1 - /* No update, previous image value is used */ -#define ISIF_VERT_BC_NO_UPDATE 2 - /* - * Reset value selector for vertical clamp calculation. Use one of - * the above values - */ - __u8 reset_val_sel; - /* U8Q8. Line average coefficient used in vertical clamp calculation */ - __u8 line_ave_coef; - /* Height of the optical black region for calculation */ - __u16 ob_v_sz_calc; - /* Optical black region start position - horizontal. 0 - 8191 */ - __u16 ob_start_h; - /* Optical black region start position - vertical 0 - 8191 */ - __u16 ob_start_v; -}; - -struct isif_black_clamp { - /* - * This offset value is added irrespective of the clamp enable status. - * S13 - */ - __u16 dc_offset; - /* - * Enable black/digital clamp value to be subtracted from the image data - */ - __u8 en; - /* - * black clamp mode. same/separate clamp for 4 colors - * 0 - disable - same clamp value for all colors - * 1 - clamp value calculated separately for all colors - */ - __u8 bc_mode_color; - /* Vertical start position for bc subtraction */ - __u16 vert_start_sub; - /* Black clamp for horizontal direction */ - struct isif_horz_bclamp horz; - /* Black clamp for vertical direction */ - struct isif_vert_bclamp vert; -}; - -/************************************************************************* -** Color Space Conversion (CSC) -*************************************************************************/ -#define ISIF_CSC_NUM_COEFF 16 -struct isif_color_space_conv { - /* Enable color space conversion */ - __u8 en; - /* - * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and - * so forth - */ - struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF]; -}; - - -/************************************************************************* -** Black Compensation parameters -*************************************************************************/ -struct isif_black_comp { - /* Comp for Red */ - __s8 r_comp; - /* Comp for Gr */ - __s8 gr_comp; - /* Comp for Blue */ - __s8 b_comp; - /* Comp for Gb */ - __s8 gb_comp; -}; - -/************************************************************************* -** Gain parameters -*************************************************************************/ -struct isif_gain { - /* Gain for Red or ye */ - struct isif_float_16 r_ye; - /* Gain for Gr or cy */ - struct isif_float_16 gr_cy; - /* Gain for Gb or g */ - struct isif_float_16 gb_g; - /* Gain for Blue or mg */ - struct isif_float_16 b_mg; -}; - -#define ISIF_LINEAR_TAB_SIZE 192 -/************************************************************************* -** Linearization parameters -*************************************************************************/ -struct isif_linearize { - /* Enable or Disable linearization of data */ - __u8 en; - /* Shift value applied */ - __u8 corr_shft; - /* scale factor applied U11Q10 */ - struct isif_float_16 scale_fact; - /* Size of the linear table */ - __u16 table[ISIF_LINEAR_TAB_SIZE]; -}; - -/* Color patterns */ -#define ISIF_RED 0 -#define ISIF_GREEN_RED 1 -#define ISIF_GREEN_BLUE 2 -#define ISIF_BLUE 3 -struct isif_col_pat { - __u8 olop; - __u8 olep; - __u8 elop; - __u8 elep; -}; - -/************************************************************************* -** Data formatter parameters -*************************************************************************/ -struct isif_fmtplen { - /* - * number of program entries for SET0, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen0; - /* - * number of program entries for SET1, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen1; - /** - * number of program entries for SET2, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen2; - /** - * number of program entries for SET3, range 1 - 16 - * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is - * ISIF_COMBINE - */ - __u16 plen3; -}; - -struct isif_fmt_cfg { -#define ISIF_SPLIT 0 -#define ISIF_COMBINE 1 - /* Split or combine or line alternate */ - __u8 fmtmode; - /* enable or disable line alternating mode */ - __u8 ln_alter_en; -#define ISIF_1LINE 0 -#define ISIF_2LINES 1 -#define ISIF_3LINES 2 -#define ISIF_4LINES 3 - /* Split/combine line number */ - __u8 lnum; - /* Address increment Range 1 - 16 */ - __u8 addrinc; -}; - -struct isif_fmt_addr_ptr { - /* Initial address */ - __u32 init_addr; - /* output line number */ -#define ISIF_1STLINE 0 -#define ISIF_2NDLINE 1 -#define ISIF_3RDLINE 2 -#define ISIF_4THLINE 3 - __u8 out_line; -}; - -struct isif_fmtpgm_ap { - /* program address pointer */ - __u8 pgm_aptr; - /* program address increment or decrement */ - __u8 pgmupdt; -}; - -struct isif_data_formatter { - /* Enable/Disable data formatter */ - __u8 en; - /* data formatter configuration */ - struct isif_fmt_cfg cfg; - /* Formatter program entries length */ - struct isif_fmtplen plen; - /* first pixel in a line fed to formatter */ - __u16 fmtrlen; - /* HD interval for output line. Only valid when split line */ - __u16 fmthcnt; - /* formatter address pointers */ - struct isif_fmt_addr_ptr fmtaddr_ptr[16]; - /* program enable/disable */ - __u8 pgm_en[32]; - /* program address pointers */ - struct isif_fmtpgm_ap fmtpgm_ap[32]; -}; - -struct isif_df_csc { - /* Color Space Conversion configuration, 0 - csc, 1 - df */ - __u8 df_or_csc; - /* csc configuration valid if df_or_csc is 0 */ - struct isif_color_space_conv csc; - /* data formatter configuration valid if df_or_csc is 1 */ - struct isif_data_formatter df; - /* start pixel in a line at the input */ - __u32 start_pix; - /* number of pixels in input line */ - __u32 num_pixels; - /* start line at the input */ - __u32 start_line; - /* number of lines at the input */ - __u32 num_lines; -}; - -struct isif_gain_offsets_adj { - /* Gain adjustment per color */ - struct isif_gain gain; - /* Offset adjustment */ - __u16 offset; - /* Enable or Disable Gain adjustment for SDRAM data */ - __u8 gain_sdram_en; - /* Enable or Disable Gain adjustment for IPIPE data */ - __u8 gain_ipipe_en; - /* Enable or Disable Gain adjustment for H3A data */ - __u8 gain_h3a_en; - /* Enable or Disable Gain adjustment for SDRAM data */ - __u8 offset_sdram_en; - /* Enable or Disable Gain adjustment for IPIPE data */ - __u8 offset_ipipe_en; - /* Enable or Disable Gain adjustment for H3A data */ - __u8 offset_h3a_en; -}; - -struct isif_cul { - /* Horizontal Cull pattern for odd lines */ - __u8 hcpat_odd; - /* Horizontal Cull pattern for even lines */ - __u8 hcpat_even; - /* Vertical Cull pattern */ - __u8 vcpat; - /* Enable or disable lpf. Apply when cull is enabled */ - __u8 en_lpf; -}; - -struct isif_compress { -#define ISIF_ALAW 0 -#define ISIF_DPCM 1 -#define ISIF_NO_COMPRESSION 2 - /* Compression Algorithm used */ - __u8 alg; - /* Choose Predictor1 for DPCM compression */ -#define ISIF_DPCM_PRED1 0 - /* Choose Predictor2 for DPCM compression */ -#define ISIF_DPCM_PRED2 1 - /* Predictor for DPCM compression */ - __u8 pred; -}; - -/* all the stuff in this struct will be provided by userland */ -struct isif_config_params_raw { - /* Linearization parameters for image sensor data input */ - struct isif_linearize linearize; - /* Data formatter or CSC */ - struct isif_df_csc df_csc; - /* Defect Pixel Correction (DFC) configuration */ - struct isif_dfc dfc; - /* Black/Digital Clamp configuration */ - struct isif_black_clamp bclamp; - /* Gain, offset adjustments */ - struct isif_gain_offsets_adj gain_offset; - /* Culling */ - struct isif_cul culling; - /* A-Law and DPCM compression options */ - struct isif_compress compress; - /* horizontal offset for Gain/LSC/DFC */ - __u16 horz_offset; - /* vertical offset for Gain/LSC/DFC */ - __u16 vert_offset; - /* color pattern for field 0 */ - struct isif_col_pat col_pat_field0; - /* color pattern for field 1 */ - struct isif_col_pat col_pat_field1; -#define ISIF_NO_SHIFT 0 -#define ISIF_1BIT_SHIFT 1 -#define ISIF_2BIT_SHIFT 2 -#define ISIF_3BIT_SHIFT 3 -#define ISIF_4BIT_SHIFT 4 -#define ISIF_5BIT_SHIFT 5 -#define ISIF_6BIT_SHIFT 6 - /* Data shift applied before storing to SDRAM */ - __u8 data_shift; - /* enable input test pattern generation */ - __u8 test_pat_gen; -}; - -#ifdef __KERNEL__ -struct isif_ycbcr_config { - /* isif pixel format */ - enum ccdc_pixfmt pix_fmt; - /* isif frame format */ - enum ccdc_frmfmt frm_fmt; - /* ISIF crop window */ - struct v4l2_rect win; - /* field polarity */ - enum vpfe_pin_pol fid_pol; - /* interface VD polarity */ - enum vpfe_pin_pol vd_pol; - /* interface HD polarity */ - enum vpfe_pin_pol hd_pol; - /* isif pix order. Only used for ycbcr capture */ - enum ccdc_pixorder pix_order; - /* isif buffer type. Only used for ycbcr capture */ - enum ccdc_buftype buf_type; -}; - -/* MSB of image data connected to sensor port */ -enum isif_data_msb { - ISIF_BIT_MSB_15, - ISIF_BIT_MSB_14, - ISIF_BIT_MSB_13, - ISIF_BIT_MSB_12, - ISIF_BIT_MSB_11, - ISIF_BIT_MSB_10, - ISIF_BIT_MSB_9, - ISIF_BIT_MSB_8, - ISIF_BIT_MSB_7 -}; - -enum isif_cfa_pattern { - ISIF_CFA_PAT_MOSAIC, - ISIF_CFA_PAT_STRIPE -}; - -struct isif_params_raw { - /* isif pixel format */ - enum ccdc_pixfmt pix_fmt; - /* isif frame format */ - enum ccdc_frmfmt frm_fmt; - /* video window */ - struct v4l2_rect win; - /* field polarity */ - enum vpfe_pin_pol fid_pol; - /* interface VD polarity */ - enum vpfe_pin_pol vd_pol; - /* interface HD polarity */ - enum vpfe_pin_pol hd_pol; - /* buffer type. Applicable for interlaced mode */ - enum ccdc_buftype buf_type; - /* Gain values */ - struct isif_gain gain; - /* cfa pattern */ - enum isif_cfa_pattern cfa_pat; - /* Data MSB position */ - enum isif_data_msb data_msb; - /* Enable horizontal flip */ - unsigned char horz_flip_en; - /* Enable image invert vertically */ - unsigned char image_invert_en; - - /* all the userland defined stuff*/ - struct isif_config_params_raw config_params; -}; - -enum isif_data_pack { - ISIF_PACK_16BIT, - ISIF_PACK_12BIT, - ISIF_PACK_8BIT -}; - -#define ISIF_WIN_NTSC {0, 0, 720, 480} -#define ISIF_WIN_VGA {0, 0, 640, 480} - -#endif -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h deleted file mode 100644 index d68d38841ae7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h +++ /dev/null @@ -1,256 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - */ -#ifndef _ISIF_REGS_H -#define _ISIF_REGS_H - -/* ISIF registers relative offsets */ -#define SYNCEN 0x00 -#define MODESET 0x04 -#define HDW 0x08 -#define VDW 0x0c -#define PPLN 0x10 -#define LPFR 0x14 -#define SPH 0x18 -#define LNH 0x1c -#define SLV0 0x20 -#define SLV1 0x24 -#define LNV 0x28 -#define CULH 0x2c -#define CULV 0x30 -#define HSIZE 0x34 -#define SDOFST 0x38 -#define CADU 0x3c -#define CADL 0x40 -#define LINCFG0 0x44 -#define LINCFG1 0x48 -#define CCOLP 0x4c -#define CRGAIN 0x50 -#define CGRGAIN 0x54 -#define CGBGAIN 0x58 -#define CBGAIN 0x5c -#define COFSTA 0x60 -#define FLSHCFG0 0x64 -#define FLSHCFG1 0x68 -#define FLSHCFG2 0x6c -#define VDINT0 0x70 -#define VDINT1 0x74 -#define VDINT2 0x78 -#define MISC 0x7c -#define CGAMMAWD 0x80 -#define REC656IF 0x84 -#define CCDCFG 0x88 -/***************************************************** -* Defect Correction registers -*****************************************************/ -#define DFCCTL 0x8c -#define VDFSATLV 0x90 -#define DFCMEMCTL 0x94 -#define DFCMEM0 0x98 -#define DFCMEM1 0x9c -#define DFCMEM2 0xa0 -#define DFCMEM3 0xa4 -#define DFCMEM4 0xa8 -/**************************************************** -* Black Clamp registers -****************************************************/ -#define CLAMPCFG 0xac -#define CLDCOFST 0xb0 -#define CLSV 0xb4 -#define CLHWIN0 0xb8 -#define CLHWIN1 0xbc -#define CLHWIN2 0xc0 -#define CLVRV 0xc4 -#define CLVWIN0 0xc8 -#define CLVWIN1 0xcc -#define CLVWIN2 0xd0 -#define CLVWIN3 0xd4 -/**************************************************** -* Lense Shading Correction -****************************************************/ -#define DATAHOFST 0xd8 -#define DATAVOFST 0xdc -#define LSCHVAL 0xe0 -#define LSCVVAL 0xe4 -#define TWODLSCCFG 0xe8 -#define TWODLSCOFST 0xec -#define TWODLSCINI 0xf0 -#define TWODLSCGRBU 0xf4 -#define TWODLSCGRBL 0xf8 -#define TWODLSCGROF 0xfc -#define TWODLSCORBU 0x100 -#define TWODLSCORBL 0x104 -#define TWODLSCOROF 0x108 -#define TWODLSCIRQEN 0x10c -#define TWODLSCIRQST 0x110 -/**************************************************** -* Data formatter -****************************************************/ -#define FMTCFG 0x114 -#define FMTPLEN 0x118 -#define FMTSPH 0x11c -#define FMTLNH 0x120 -#define FMTSLV 0x124 -#define FMTLNV 0x128 -#define FMTRLEN 0x12c -#define FMTHCNT 0x130 -#define FMTAPTR_BASE 0x134 -/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */ -#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4)) -#define FMTPGMVF0 0x174 -#define FMTPGMVF1 0x178 -#define FMTPGMAPU0 0x17c -#define FMTPGMAPU1 0x180 -#define FMTPGMAPS0 0x184 -#define FMTPGMAPS1 0x188 -#define FMTPGMAPS2 0x18c -#define FMTPGMAPS3 0x190 -#define FMTPGMAPS4 0x194 -#define FMTPGMAPS5 0x198 -#define FMTPGMAPS6 0x19c -#define FMTPGMAPS7 0x1a0 -/************************************************ -* Color Space Converter -************************************************/ -#define CSCCTL 0x1a4 -#define CSCM0 0x1a8 -#define CSCM1 0x1ac -#define CSCM2 0x1b0 -#define CSCM3 0x1b4 -#define CSCM4 0x1b8 -#define CSCM5 0x1bc -#define CSCM6 0x1c0 -#define CSCM7 0x1c4 -#define OBWIN0 0x1c8 -#define OBWIN1 0x1cc -#define OBWIN2 0x1d0 -#define OBWIN3 0x1d4 -#define OBVAL0 0x1d8 -#define OBVAL1 0x1dc -#define OBVAL2 0x1e0 -#define OBVAL3 0x1e4 -#define OBVAL4 0x1e8 -#define OBVAL5 0x1ec -#define OBVAL6 0x1f0 -#define OBVAL7 0x1f4 -#define CLKCTL 0x1f8 - -/* Masks & Shifts below */ -#define START_PX_HOR_MASK 0x7FFF -#define NUM_PX_HOR_MASK 0x7FFF -#define START_VER_ONE_MASK 0x7FFF -#define START_VER_TWO_MASK 0x7FFF -#define NUM_LINES_VER 0x7FFF - -/* gain - offset masks */ -#define GAIN_INTEGER_SHIFT 9 -#define OFFSET_MASK 0xFFF -#define GAIN_SDRAM_EN_SHIFT 12 -#define GAIN_IPIPE_EN_SHIFT 13 -#define GAIN_H3A_EN_SHIFT 14 -#define OFST_SDRAM_EN_SHIFT 8 -#define OFST_IPIPE_EN_SHIFT 9 -#define OFST_H3A_EN_SHIFT 10 -#define GAIN_OFFSET_EN_MASK 0x7700 - -/* Culling */ -#define CULL_PAT_EVEN_LINE_SHIFT 8 - -/* CCDCFG register */ -#define ISIF_YCINSWP_RAW (0x00 << 4) -#define ISIF_YCINSWP_YCBCR (0x01 << 4) -#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6) -#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8) -#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9) -#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10) -#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15) -#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15) -#define ISIF_DATA_PACK_MASK 3 -#define ISIF_DATA_PACK16 0 -#define ISIF_DATA_PACK12 1 -#define ISIF_DATA_PACK8 2 -#define ISIF_PIX_ORDER_SHIFT 11 -#define ISIF_BW656_ENABLE (0x01 << 5) - -/* MODESET registers */ -#define ISIF_VDHDOUT_INPUT (0x00 << 0) -#define ISIF_INPUT_SHIFT 12 -#define ISIF_RAW_INPUT_MODE 0 -#define ISIF_FID_POL_SHIFT 4 -#define ISIF_HD_POL_SHIFT 3 -#define ISIF_VD_POL_SHIFT 2 -#define ISIF_DATAPOL_NORMAL 0 -#define ISIF_DATAPOL_SHIFT 6 -#define ISIF_EXWEN_DISABLE 0 -#define ISIF_EXWEN_SHIFT 5 -#define ISIF_FRM_FMT_SHIFT 7 -#define ISIF_DATASFT_SHIFT 8 -#define ISIF_LPF_SHIFT 14 -#define ISIF_LPF_MASK 1 - -/* GAMMAWD registers */ -#define ISIF_ALAW_GAMMA_WD_MASK 0xF -#define ISIF_ALAW_GAMMA_WD_SHIFT 1 -#define ISIF_ALAW_ENABLE 1 -#define ISIF_GAMMAWD_CFA_SHIFT 5 - -/* HSIZE registers */ -#define ISIF_HSIZE_FLIP_MASK 1 -#define ISIF_HSIZE_FLIP_SHIFT 12 - -/* MISC registers */ -#define ISIF_DPCM_EN_SHIFT 12 -#define ISIF_DPCM_PREDICTOR_SHIFT 13 - -/* Black clamp related */ -#define ISIF_BC_MODE_COLOR_SHIFT 4 -#define ISIF_HORZ_BC_MODE_SHIFT 1 -#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5 -#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6 -#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8 -#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12 -#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4 -#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8 - -/* VDFC registers */ -#define ISIF_VDFC_EN_SHIFT 4 -#define ISIF_VDFC_CORR_MOD_SHIFT 5 -#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7 -#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8 -#define ISIF_VDFC_POS_MASK 0x1FFF -#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2 - -/* CSC registers */ -#define ISIF_CSC_COEF_INTEG_MASK 7 -#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f -#define ISIF_CSC_COEF_INTEG_SHIFT 5 -#define ISIF_CSCM_MSB_SHIFT 8 -#define ISIF_DF_CSC_SPH_MASK 0x1FFF -#define ISIF_DF_CSC_LNH_MASK 0x1FFF -#define ISIF_DF_CSC_SLV_MASK 0x1FFF -#define ISIF_DF_CSC_LNV_MASK 0x1FFF -#define ISIF_DF_NUMLINES 0x7FFF -#define ISIF_DF_NUMPIX 0x1FFF - -/* Offsets for LSC/DFC/Gain */ -#define ISIF_DATA_H_OFFSET_MASK 0x1FFF -#define ISIF_DATA_V_OFFSET_MASK 0x1FFF - -/* Linearization */ -#define ISIF_LIN_CORRSFT_SHIFT 4 -#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10 - - -/* Pattern registers */ -#define ISIF_PG_EN (1 << 3) -#define ISIF_SEL_PG_SRC (3 << 4) -#define ISIF_PG_VD_POL_SHIFT 0 -#define ISIF_PG_HD_POL_SHIFT 1 - -/*random other junk*/ -#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0) -#define ISIF_SYNCEN_WEN_MASK (1 << 1) -#define ISIF_SYNCEN_WEN_SHIFT 1 - -#endif diff --git a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c deleted file mode 100644 index 0a2226b321d7..000000000000 --- a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c +++ /dev/null @@ -1,1902 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - * - * Driver name : VPFE Capture driver - * VPFE Capture driver allows applications to capture and stream video - * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as - * TVP5146 or Raw Bayer RGB image data from an image sensor - * such as Microns' MT9T001, MT9T031 etc. - * - * These SoCs have, in common, a Video Processing Subsystem (VPSS) that - * consists of a Video Processing Front End (VPFE) for capturing - * video/raw image data and Video Processing Back End (VPBE) for displaying - * YUV data through an in-built analog encoder or Digital LCD port. This - * driver is for capture through VPFE. A typical EVM using these SoCs have - * following high level configuration. - * - * decoder(TVP5146/ YUV/ - * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) - * data input | | - * V | - * SDRAM | - * V - * Image Processor - * | - * V - * SDRAM - * The data flow happens from a decoder connected to the VPFE over a - * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface - * and to the input of VPFE through an optional MUX (if more inputs are - * to be interfaced on the EVM). The input data is first passed through - * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC - * does very little or no processing on YUV data and does pre-process Raw - * Bayer RGB data through modules such as Defect Pixel Correction (DFC) - * Color Space Conversion (CSC), data gain/offset etc. After this, data - * can be written to SDRAM or can be connected to the image processing - * block such as IPIPE (on DM355 only). - * - * Features supported - * - MMAP IO - * - Capture using TVP5146 over BT.656 - * - support for interfacing decoders using sub device model - * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV - * data capture to SDRAM. - * TODO list - * - Support multiple REQBUF after open - * - Support for de-allocating buffers through REQBUF - * - Support for Raw Bayer RGB capture - * - Support for chaining Image Processor - * - Support for static allocation of buffers - * - Support for USERPTR IO - * - Support for STREAMON before QBUF - * - Support for control ioctls - */ -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <media/v4l2-common.h> -#include <linux/io.h> -#include <media/davinci/vpfe_capture.h> -#include "ccdc_hw_device.h" - -static int debug; -static u32 numbuffers = 3; -static u32 bufsize = (720 * 576 * 2); - -module_param(numbuffers, uint, S_IRUGO); -module_param(bufsize, uint, S_IRUGO); -module_param(debug, int, 0644); - -MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); -MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); -MODULE_PARM_DESC(debug, "Debug level 0-1"); - -MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments"); - -/* standard information */ -struct vpfe_standard { - v4l2_std_id std_id; - unsigned int width; - unsigned int height; - struct v4l2_fract pixelaspect; - /* 0 - progressive, 1 - interlaced */ - int frame_format; -}; - -/* ccdc configuration */ -struct ccdc_config { - /* This make sure vpfe is probed and ready to go */ - int vpfe_probed; - /* name of ccdc device */ - char name[32]; -}; - -/* data structures */ -static struct vpfe_config_params config_params = { - .min_numbuffers = 3, - .numbuffers = 3, - .min_bufsize = 720 * 480 * 2, - .device_bufsize = 720 * 576 * 2, -}; - -/* ccdc device registered */ -static const struct ccdc_hw_device *ccdc_dev; -/* lock for accessing ccdc information */ -static DEFINE_MUTEX(ccdc_lock); -/* ccdc configuration */ -static struct ccdc_config *ccdc_cfg; - -static const struct vpfe_standard vpfe_standards[] = { - {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, - {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, -}; - -/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ -static const struct vpfe_pixel_format vpfe_pix_fmts[] = { - { - .pixelformat = V4L2_PIX_FMT_SBGGR8, - .bpp = 1, - }, - { - .pixelformat = V4L2_PIX_FMT_SBGGR16, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, - .bpp = 1, - }, - { - .pixelformat = V4L2_PIX_FMT_UYVY, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_YUYV, - .bpp = 2, - }, - { - .pixelformat = V4L2_PIX_FMT_NV12, - .bpp = 1, - }, -}; - -/* - * vpfe_lookup_pix_format() - * lookup an entry in the vpfe pix format table based on pix_format - */ -static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { - if (pix_format == vpfe_pix_fmts[i].pixelformat) - return &vpfe_pix_fmts[i]; - } - return NULL; -} - -/* - * vpfe_register_ccdc_device. CCDC module calls this to - * register with vpfe capture - */ -int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev) -{ - int ret = 0; - printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); - - if (!dev->hw_ops.open || - !dev->hw_ops.enable || - !dev->hw_ops.set_hw_if_params || - !dev->hw_ops.configure || - !dev->hw_ops.set_buftype || - !dev->hw_ops.get_buftype || - !dev->hw_ops.enum_pix || - !dev->hw_ops.set_frame_format || - !dev->hw_ops.get_frame_format || - !dev->hw_ops.get_pixel_format || - !dev->hw_ops.set_pixel_format || - !dev->hw_ops.set_image_window || - !dev->hw_ops.get_image_window || - !dev->hw_ops.get_line_length || - !dev->hw_ops.getfid) - return -EINVAL; - - mutex_lock(&ccdc_lock); - if (!ccdc_cfg) { - /* - * TODO. Will this ever happen? if so, we need to fix it. - * Probably we need to add the request to a linked list and - * walk through it during vpfe probe - */ - printk(KERN_ERR "vpfe capture not initialized\n"); - ret = -EFAULT; - goto unlock; - } - - if (strcmp(dev->name, ccdc_cfg->name)) { - /* ignore this ccdc */ - ret = -EINVAL; - goto unlock; - } - - if (ccdc_dev) { - printk(KERN_ERR "ccdc already registered\n"); - ret = -EINVAL; - goto unlock; - } - - ccdc_dev = dev; -unlock: - mutex_unlock(&ccdc_lock); - return ret; -} -EXPORT_SYMBOL(vpfe_register_ccdc_device); - -/* - * vpfe_unregister_ccdc_device. CCDC module calls this to - * unregister with vpfe capture - */ -void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev) -{ - if (!dev) { - printk(KERN_ERR "invalid ccdc device ptr\n"); - return; - } - - printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", - dev->name); - - if (strcmp(dev->name, ccdc_cfg->name)) { - /* ignore this ccdc */ - return; - } - - mutex_lock(&ccdc_lock); - ccdc_dev = NULL; - mutex_unlock(&ccdc_lock); -} -EXPORT_SYMBOL(vpfe_unregister_ccdc_device); - -/* - * vpfe_config_ccdc_image_format() - * For a pix format, configure ccdc to setup the capture - */ -static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; - int ret = 0; - - if (ccdc_dev->hw_ops.set_pixel_format( - vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "couldn't set pix format in ccdc\n"); - return -EINVAL; - } - /* configure the image window */ - ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); - - switch (vpfe_dev->fmt.fmt.pix.field) { - case V4L2_FIELD_INTERLACED: - /* do nothing, since it is default */ - ret = ccdc_dev->hw_ops.set_buftype( - CCDC_BUFTYPE_FLD_INTERLEAVED); - break; - case V4L2_FIELD_NONE: - frm_fmt = CCDC_FRMFMT_PROGRESSIVE; - /* buffer type only applicable for interlaced scan */ - break; - case V4L2_FIELD_SEQ_TB: - ret = ccdc_dev->hw_ops.set_buftype( - CCDC_BUFTYPE_FLD_SEPARATED); - break; - default: - return -EINVAL; - } - - /* set the frame format */ - if (!ret) - ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); - return ret; -} -/* - * vpfe_config_image_format() - * For a given standard, this functions sets up the default - * pix format & crop values in the vpfe device and ccdc. It first - * starts with defaults based values from the standard table. - * It then checks if sub device supports get_fmt and then override the - * values based on that.Sets crop values to match with scan resolution - * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the - * values in ccdc - */ -static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, - v4l2_std_id std_id) -{ - struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; - struct v4l2_subdev_format fmt = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; - struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { - if (vpfe_standards[i].std_id & std_id) { - vpfe_dev->std_info.active_pixels = - vpfe_standards[i].width; - vpfe_dev->std_info.active_lines = - vpfe_standards[i].height; - vpfe_dev->std_info.frame_format = - vpfe_standards[i].frame_format; - vpfe_dev->std_index = i; - break; - } - } - - if (i == ARRAY_SIZE(vpfe_standards)) { - v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); - return -EINVAL; - } - - vpfe_dev->crop.top = 0; - vpfe_dev->crop.left = 0; - vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; - vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; - pix->width = vpfe_dev->crop.width; - pix->height = vpfe_dev->crop.height; - - /* first field and frame format based on standard frame format */ - if (vpfe_dev->std_info.frame_format) { - pix->field = V4L2_FIELD_INTERLACED; - /* assume V4L2_PIX_FMT_UYVY as default */ - pix->pixelformat = V4L2_PIX_FMT_UYVY; - v4l2_fill_mbus_format(mbus_fmt, pix, - MEDIA_BUS_FMT_YUYV10_2X10); - } else { - pix->field = V4L2_FIELD_NONE; - /* assume V4L2_PIX_FMT_SBGGR8 */ - pix->pixelformat = V4L2_PIX_FMT_SBGGR8; - v4l2_fill_mbus_format(mbus_fmt, pix, - MEDIA_BUS_FMT_SBGGR8_1X8); - } - - /* if sub device supports get_fmt, override the defaults */ - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, - sdinfo->grp_id, pad, get_fmt, NULL, &fmt); - - if (ret && ret != -ENOIOCTLCMD) { - v4l2_err(&vpfe_dev->v4l2_dev, - "error in getting get_fmt from sub device\n"); - return ret; - } - v4l2_fill_pix_format(pix, mbus_fmt); - pix->bytesperline = pix->width * 2; - pix->sizeimage = pix->bytesperline * pix->height; - - /* Sets the values in CCDC */ - ret = vpfe_config_ccdc_image_format(vpfe_dev); - if (ret) - return ret; - - /* Update the values of sizeimage and bytesperline */ - pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); - pix->sizeimage = pix->bytesperline * pix->height; - - return 0; -} - -static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) -{ - int ret; - - /* set first input of current subdevice as the current input */ - vpfe_dev->current_input = 0; - - /* set default standard */ - vpfe_dev->std_index = 0; - - /* Configure the default format information */ - ret = vpfe_config_image_format(vpfe_dev, - vpfe_standards[vpfe_dev->std_index].std_id); - if (ret) - return ret; - - /* now open the ccdc device to initialize it */ - mutex_lock(&ccdc_lock); - if (!ccdc_dev) { - v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); - ret = -ENODEV; - goto unlock; - } - - if (!try_module_get(ccdc_dev->owner)) { - v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); - ret = -ENODEV; - goto unlock; - } - ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); - if (!ret) - vpfe_dev->initialized = 1; - - /* Clear all VPFE/CCDC interrupts */ - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(-1); - -unlock: - mutex_unlock(&ccdc_lock); - return ret; -} - -/* - * vpfe_open : It creates object of file handle structure and - * stores it in private_data member of filepointer - */ -static int vpfe_open(struct file *file) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct video_device *vdev = video_devdata(file); - struct vpfe_fh *fh; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); - - if (!vpfe_dev->cfg->num_subdevs) { - v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); - return -ENODEV; - } - - /* Allocate memory for the file handle object */ - fh = kmalloc(sizeof(*fh), GFP_KERNEL); - if (!fh) - return -ENOMEM; - - /* store pointer to fh in private_data member of file */ - file->private_data = fh; - fh->vpfe_dev = vpfe_dev; - v4l2_fh_init(&fh->fh, vdev); - mutex_lock(&vpfe_dev->lock); - /* If decoder is not initialized. initialize it */ - if (!vpfe_dev->initialized) { - if (vpfe_initialize_device(vpfe_dev)) { - mutex_unlock(&vpfe_dev->lock); - v4l2_fh_exit(&fh->fh); - kfree(fh); - return -ENODEV; - } - } - /* Increment device usrs counter */ - vpfe_dev->usrs++; - /* Set io_allowed member to false */ - fh->io_allowed = 0; - v4l2_fh_add(&fh->fh); - mutex_unlock(&vpfe_dev->lock); - return 0; -} - -static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) -{ - unsigned long addr; - - vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, - struct videobuf_buffer, queue); - list_del(&vpfe_dev->next_frm->queue); - vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; - addr = videobuf_to_dma_contig(vpfe_dev->next_frm); - - ccdc_dev->hw_ops.setfbaddr(addr); -} - -static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) -{ - unsigned long addr; - - addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); - addr += vpfe_dev->field_off; - ccdc_dev->hw_ops.setfbaddr(addr); -} - -static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) -{ - vpfe_dev->cur_frm->ts = ktime_get_ns(); - vpfe_dev->cur_frm->state = VIDEOBUF_DONE; - vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; - wake_up_interruptible(&vpfe_dev->cur_frm->done); - vpfe_dev->cur_frm = vpfe_dev->next_frm; -} - -/* ISR for VINT0*/ -static irqreturn_t vpfe_isr(int irq, void *dev_id) -{ - struct vpfe_device *vpfe_dev = dev_id; - enum v4l2_field field; - int fid; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); - field = vpfe_dev->fmt.fmt.pix.field; - - /* if streaming not started, don't do anything */ - if (!vpfe_dev->started) - goto clear_intr; - - /* only for 6446 this will be applicable */ - if (ccdc_dev->hw_ops.reset) - ccdc_dev->hw_ops.reset(); - - if (field == V4L2_FIELD_NONE) { - /* handle progressive frame capture */ - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "frame format is progressive...\n"); - if (vpfe_dev->cur_frm != vpfe_dev->next_frm) - vpfe_process_buffer_complete(vpfe_dev); - goto clear_intr; - } - - /* interlaced or TB capture check which field we are in hardware */ - fid = ccdc_dev->hw_ops.getfid(); - - /* switch the software maintained field id */ - vpfe_dev->field_id ^= 1; - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", - fid, vpfe_dev->field_id); - if (fid == vpfe_dev->field_id) { - /* we are in-sync here,continue */ - if (fid == 0) { - /* - * One frame is just being captured. If the next frame - * is available, release the current frame and move on - */ - if (vpfe_dev->cur_frm != vpfe_dev->next_frm) - vpfe_process_buffer_complete(vpfe_dev); - /* - * based on whether the two fields are stored - * interleavely or separately in memory, reconfigure - * the CCDC memory address - */ - if (field == V4L2_FIELD_SEQ_TB) - vpfe_schedule_bottom_field(vpfe_dev); - goto clear_intr; - } - /* - * if one field is just being captured configure - * the next frame get the next frame from the empty - * queue if no frame is available hold on to the - * current buffer - */ - spin_lock(&vpfe_dev->dma_queue_lock); - if (!list_empty(&vpfe_dev->dma_queue) && - vpfe_dev->cur_frm == vpfe_dev->next_frm) - vpfe_schedule_next_buffer(vpfe_dev); - spin_unlock(&vpfe_dev->dma_queue_lock); - } else if (fid == 0) { - /* - * out of sync. Recover from any hardware out-of-sync. - * May loose one frame - */ - vpfe_dev->field_id = fid; - } -clear_intr: - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - - return IRQ_HANDLED; -} - -/* vdint1_isr - isr handler for VINT1 interrupt */ -static irqreturn_t vdint1_isr(int irq, void *dev_id) -{ - struct vpfe_device *vpfe_dev = dev_id; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); - - /* if streaming not started, don't do anything */ - if (!vpfe_dev->started) { - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - return IRQ_HANDLED; - } - - spin_lock(&vpfe_dev->dma_queue_lock); - if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && - !list_empty(&vpfe_dev->dma_queue) && - vpfe_dev->cur_frm == vpfe_dev->next_frm) - vpfe_schedule_next_buffer(vpfe_dev); - spin_unlock(&vpfe_dev->dma_queue_lock); - - if (vpfe_dev->cfg->clr_intr) - vpfe_dev->cfg->clr_intr(irq); - - return IRQ_HANDLED; -} - -static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frame_format; - - frame_format = ccdc_dev->hw_ops.get_frame_format(); - if (frame_format == CCDC_FRMFMT_PROGRESSIVE) - free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); -} - -static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) -{ - enum ccdc_frmfmt frame_format; - - frame_format = ccdc_dev->hw_ops.get_frame_format(); - if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { - return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, - 0, "vpfe_capture1", - vpfe_dev); - } - return 0; -} - -/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ -static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) -{ - vpfe_dev->started = 0; - ccdc_dev->hw_ops.enable(0); - if (ccdc_dev->hw_ops.enable_out_to_sdram) - ccdc_dev->hw_ops.enable_out_to_sdram(0); -} - -/* - * vpfe_release : This function deletes buffer queue, frees the - * buffers and the vpfe file handle - */ -static int vpfe_release(struct file *file) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); - - /* Get the device lock */ - mutex_lock(&vpfe_dev->lock); - /* if this instance is doing IO */ - if (fh->io_allowed) { - if (vpfe_dev->started) { - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, - sdinfo->grp_id, - video, s_stream, 0); - if (ret && (ret != -ENOIOCTLCMD)) - v4l2_err(&vpfe_dev->v4l2_dev, - "stream off failed in subdev\n"); - vpfe_stop_ccdc_capture(vpfe_dev); - vpfe_detach_irq(vpfe_dev); - videobuf_streamoff(&vpfe_dev->buffer_queue); - } - vpfe_dev->io_usrs = 0; - vpfe_dev->numbuffers = config_params.numbuffers; - videobuf_stop(&vpfe_dev->buffer_queue); - videobuf_mmap_free(&vpfe_dev->buffer_queue); - } - - /* Decrement device usrs counter */ - vpfe_dev->usrs--; - v4l2_fh_del(&fh->fh); - v4l2_fh_exit(&fh->fh); - /* If this is the last file handle */ - if (!vpfe_dev->usrs) { - vpfe_dev->initialized = 0; - if (ccdc_dev->hw_ops.close) - ccdc_dev->hw_ops.close(vpfe_dev->pdev); - module_put(ccdc_dev->owner); - } - mutex_unlock(&vpfe_dev->lock); - file->private_data = NULL; - /* Free memory allocated to file handle object */ - kfree(fh); - return 0; -} - -/* - * vpfe_mmap : It is used to map kernel space buffers - * into user spaces - */ -static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) -{ - /* Get the device object and file handle object */ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); - - return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); -} - -/* - * vpfe_poll: It is used for select/poll system call - */ -static __poll_t vpfe_poll(struct file *file, poll_table *wait) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); - - if (vpfe_dev->started) - return videobuf_poll_stream(file, - &vpfe_dev->buffer_queue, wait); - return 0; -} - -/* vpfe capture driver file operations */ -static const struct v4l2_file_operations vpfe_fops = { - .owner = THIS_MODULE, - .open = vpfe_open, - .release = vpfe_release, - .unlocked_ioctl = video_ioctl2, - .mmap = vpfe_mmap, - .poll = vpfe_poll -}; - -/* - * vpfe_check_format() - * This function adjust the input pixel format as per hardware - * capabilities and update the same in pixfmt. - * Following algorithm used :- - * - * If given pixformat is not in the vpfe list of pix formats or not - * supported by the hardware, current value of pixformat in the device - * is used - * If given field is not supported, then current field is used. If field - * is different from current, then it is matched with that from sub device. - * Minimum height is 2 lines for interlaced or tb field and 1 line for - * progressive. Maximum height is clamped to active active lines of scan - * Minimum width is 32 bytes in memory and width is clamped to active - * pixels of scan. - * bytesperline is a multiple of 32. - */ -static const struct vpfe_pixel_format * - vpfe_check_format(struct vpfe_device *vpfe_dev, - struct v4l2_pix_format *pixfmt) -{ - u32 min_height = 1, min_width = 32, max_width, max_height; - const struct vpfe_pixel_format *vpfe_pix_fmt; - u32 pix; - int temp, found; - - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - if (!vpfe_pix_fmt) { - /* - * use current pixel format in the vpfe device. We - * will find this pix format in the table - */ - pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - } - - /* check if hw supports it */ - temp = 0; - found = 0; - while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { - if (vpfe_pix_fmt->pixelformat == pix) { - found = 1; - break; - } - temp++; - } - - if (!found) { - /* use current pixel format */ - pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; - /* - * Since this is currently used in the vpfe device, we - * will find this pix format in the table - */ - vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - } - - /* check what field format is supported */ - if (pixfmt->field == V4L2_FIELD_ANY) { - /* if field is any, use current value as default */ - pixfmt->field = vpfe_dev->fmt.fmt.pix.field; - } - - /* - * if field is not same as current field in the vpfe device - * try matching the field with the sub device field - */ - if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { - /* - * If field value is not in the supported fields, use current - * field used in the device as default - */ - switch (pixfmt->field) { - case V4L2_FIELD_INTERLACED: - case V4L2_FIELD_SEQ_TB: - /* if sub device is supporting progressive, use that */ - if (!vpfe_dev->std_info.frame_format) - pixfmt->field = V4L2_FIELD_NONE; - break; - case V4L2_FIELD_NONE: - if (vpfe_dev->std_info.frame_format) - pixfmt->field = V4L2_FIELD_INTERLACED; - break; - - default: - /* use current field as default */ - pixfmt->field = vpfe_dev->fmt.fmt.pix.field; - break; - } - } - - /* Now adjust image resolutions supported */ - if (pixfmt->field == V4L2_FIELD_INTERLACED || - pixfmt->field == V4L2_FIELD_SEQ_TB) - min_height = 2; - - max_width = vpfe_dev->std_info.active_pixels; - max_height = vpfe_dev->std_info.active_lines; - min_width /= vpfe_pix_fmt->bpp; - - v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", - pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); - - pixfmt->width = clamp((pixfmt->width), min_width, max_width); - pixfmt->height = clamp((pixfmt->height), min_height, max_height); - - /* If interlaced, adjust height to be a multiple of 2 */ - if (pixfmt->field == V4L2_FIELD_INTERLACED) - pixfmt->height &= (~1); - /* - * recalculate bytesperline and sizeimage since width - * and height might have changed - */ - pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) - & ~31); - if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) - pixfmt->sizeimage = - pixfmt->bytesperline * pixfmt->height + - ((pixfmt->bytesperline * pixfmt->height) >> 1); - else - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; - - v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", - pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, - pixfmt->bytesperline, pixfmt->sizeimage); - return vpfe_pix_fmt; -} - -static int vpfe_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); - - strscpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); - strscpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); - strscpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); - return 0; -} - -static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); - /* Fill in the information about format */ - *fmt = vpfe_dev->fmt; - return 0; -} - -static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmt; - u32 pix; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); - - if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) - return -EINVAL; - - /* Fill in the information about format */ - pix_fmt = vpfe_lookup_pix_format(pix); - if (pix_fmt) { - fmt->pixelformat = pix_fmt->pixelformat; - return 0; - } - return -EINVAL; -} - -static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmts; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); - - /* If streaming is started, return error */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); - return -EBUSY; - } - - /* Check for valid frame format */ - pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); - if (!pix_fmts) - return -EINVAL; - - /* store the pixel format in the device object */ - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - /* First detach any IRQ if currently attached */ - vpfe_detach_irq(vpfe_dev); - vpfe_dev->fmt = *fmt; - /* set image capture parameters in the ccdc */ - ret = vpfe_config_ccdc_image_format(vpfe_dev); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - const struct vpfe_pixel_format *pix_fmts; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); - - pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); - if (!pix_fmts) - return -EINVAL; - return 0; -} - -/* - * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a - * given app input index - */ -static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, - int *subdev_index, - int *subdev_input_index, - int app_input_index) -{ - struct vpfe_config *cfg = vpfe_dev->cfg; - struct vpfe_subdev_info *sdinfo; - int i, j = 0; - - for (i = 0; i < cfg->num_subdevs; i++) { - sdinfo = &cfg->sub_devs[i]; - if (app_input_index < (j + sdinfo->num_inputs)) { - *subdev_index = i; - *subdev_input_index = app_input_index - j; - return 0; - } - j += sdinfo->num_inputs; - } - return -EINVAL; -} - -/* - * vpfe_get_app_input - Get app input index for a given subdev input index - * driver stores the input index of the current sub device and translate it - * when application request the current input - */ -static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, - int *app_input_index) -{ - struct vpfe_config *cfg = vpfe_dev->cfg; - struct vpfe_subdev_info *sdinfo; - int i, j = 0; - - for (i = 0; i < cfg->num_subdevs; i++) { - sdinfo = &cfg->sub_devs[i]; - if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { - if (vpfe_dev->current_input >= sdinfo->num_inputs) - return -1; - *app_input_index = j + vpfe_dev->current_input; - return 0; - } - j += sdinfo->num_inputs; - } - return -EINVAL; -} - -static int vpfe_enum_input(struct file *file, void *priv, - struct v4l2_input *inp) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int subdev, index ; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); - - if (vpfe_get_subdev_input_index(vpfe_dev, - &subdev, - &index, - inp->index) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n"); - return -EINVAL; - } - sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; - *inp = sdinfo->inputs[index]; - return 0; -} - -static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); - - return vpfe_get_app_input_index(vpfe_dev, index); -} - - -static int vpfe_s_input(struct file *file, void *priv, unsigned int index) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct v4l2_subdev *sd; - struct vpfe_subdev_info *sdinfo; - int subdev_index, inp_index; - struct vpfe_route *route; - u32 input, output; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - /* - * If streaming is started return device busy - * error - */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); - ret = -EBUSY; - goto unlock_out; - } - ret = vpfe_get_subdev_input_index(vpfe_dev, - &subdev_index, - &inp_index, - index); - if (ret < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); - goto unlock_out; - } - - sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; - sd = vpfe_dev->sd[subdev_index]; - route = &sdinfo->routes[inp_index]; - if (route && sdinfo->can_route) { - input = route->input; - output = route->output; - } else { - input = 0; - output = 0; - } - - if (sd) - ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0); - - if (ret) { - v4l2_err(&vpfe_dev->v4l2_dev, - "vpfe_doioctl:error in setting input in decoder\n"); - ret = -EINVAL; - goto unlock_out; - } - vpfe_dev->current_subdev = sdinfo; - if (sd) - vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler; - vpfe_dev->current_input = index; - vpfe_dev->std_index = 0; - - /* set the bus/interface parameter for the sub device in ccdc */ - ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); - if (ret) - goto unlock_out; - - /* set the default image parameters in the device */ - ret = vpfe_config_image_format(vpfe_dev, - vpfe_standards[vpfe_dev->std_index].std_id); -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - sdinfo = vpfe_dev->current_subdev; - if (ret) - return ret; - /* Call querystd function of decoder device */ - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, querystd, std_id); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); - - /* Call decoder driver function to set the standard */ - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - sdinfo = vpfe_dev->current_subdev; - /* If streaming is started, return device busy error */ - if (vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); - ret = -EBUSY; - goto unlock_out; - } - - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_std, std_id); - if (ret < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); - goto unlock_out; - } - ret = vpfe_config_image_format(vpfe_dev, std_id); - -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); - - *std_id = vpfe_standards[vpfe_dev->std_index].std_id; - return 0; -} -/* - * Videobuf operations - */ -static int vpfe_videobuf_setup(struct videobuf_queue *vq, - unsigned int *count, - unsigned int *size) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); - *size = vpfe_dev->fmt.fmt.pix.sizeimage; - if (vpfe_dev->memory == V4L2_MEMORY_MMAP && - vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) - *size = config_params.device_bufsize; - - if (*count < config_params.min_numbuffers) - *count = config_params.min_numbuffers; - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "count=%d, size=%d\n", *count, *size); - return 0; -} - -static int vpfe_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long addr; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); - - /* If buffer is not initialized, initialize it */ - if (VIDEOBUF_NEEDS_INIT == vb->state) { - vb->width = vpfe_dev->fmt.fmt.pix.width; - vb->height = vpfe_dev->fmt.fmt.pix.height; - vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; - vb->field = field; - - ret = videobuf_iolock(vq, vb, NULL); - if (ret < 0) - return ret; - - addr = videobuf_to_dma_contig(vb); - /* Make sure user addresses are aligned to 32 bytes */ - if (!ALIGN(addr, 32)) - return -EINVAL; - - vb->state = VIDEOBUF_PREPARED; - } - return 0; -} - -static void vpfe_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - /* Get the file handle object and device object */ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long flags; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); - - /* add the buffer to the DMA queue */ - spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); - list_add_tail(&vb->queue, &vpfe_dev->dma_queue); - spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); - - /* Change state of the buffer */ - vb->state = VIDEOBUF_QUEUED; -} - -static void vpfe_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct vpfe_fh *fh = vq->priv_data; - struct vpfe_device *vpfe_dev = fh->vpfe_dev; - unsigned long flags; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); - - /* - * We need to flush the buffer from the dma queue since - * they are de-allocated - */ - spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); - INIT_LIST_HEAD(&vpfe_dev->dma_queue); - spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); - videobuf_dma_contig_free(vq, vb); - vb->state = VIDEOBUF_NEEDS_INIT; -} - -static const struct videobuf_queue_ops vpfe_videobuf_qops = { - .buf_setup = vpfe_videobuf_setup, - .buf_prepare = vpfe_videobuf_prepare, - .buf_queue = vpfe_videobuf_queue, - .buf_release = vpfe_videobuf_release, -}; - -/* - * vpfe_reqbufs. currently support REQBUF only once opening - * the device. - */ -static int vpfe_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *req_buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); - return -EINVAL; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - if (vpfe_dev->io_usrs != 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); - ret = -EBUSY; - goto unlock_out; - } - - vpfe_dev->memory = req_buf->memory; - videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, - &vpfe_videobuf_qops, - vpfe_dev->pdev, - &vpfe_dev->irqlock, - req_buf->type, - vpfe_dev->fmt.fmt.pix.field, - sizeof(struct videobuf_buffer), - fh, NULL); - - fh->io_allowed = 1; - vpfe_dev->io_usrs = 1; - INIT_LIST_HEAD(&vpfe_dev->dma_queue); - ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_querybuf(struct file *file, void *priv, - struct v4l2_buffer *buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); - return -EINVAL; - } - /* Call videobuf_querybuf to get information */ - return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); -} - -static int vpfe_qbuf(struct file *file, void *priv, - struct v4l2_buffer *p) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* - * If this file handle is not allowed to do IO, - * return error - */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - return videobuf_qbuf(&vpfe_dev->buffer_queue, p); -} - -static int vpfe_dqbuf(struct file *file, void *priv, - struct v4l2_buffer *buf) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - return videobuf_dqbuf(&vpfe_dev->buffer_queue, - buf, file->f_flags & O_NONBLOCK); -} - -/* - * vpfe_calculate_offsets : This function calculates buffers offset - * for top and bottom field - */ -static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) -{ - struct v4l2_rect image_win; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); - - ccdc_dev->hw_ops.get_image_window(&image_win); - vpfe_dev->field_off = image_win.height * image_win.width; -} - -/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ -static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) -{ - ccdc_dev->hw_ops.enable(1); - if (ccdc_dev->hw_ops.enable_out_to_sdram) - ccdc_dev->hw_ops.enable_out_to_sdram(1); - vpfe_dev->started = 1; -} - -/* - * vpfe_streamon. Assume the DMA queue is not empty. - * application is expected to call QBUF before calling - * this ioctl. If not, driver returns error - */ -static int vpfe_streamon(struct file *file, void *priv, - enum v4l2_buf_type buf_type) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - unsigned long addr; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* If file handle is not allowed IO, return error */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_stream, 1); - - if (ret && (ret != -ENOIOCTLCMD)) { - v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); - return -EINVAL; - } - - /* If buffer queue is empty, return error */ - if (list_empty(&vpfe_dev->buffer_queue.stream)) { - v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); - return -EIO; - } - - /* Call videobuf_streamon to start streaming * in videobuf */ - ret = videobuf_streamon(&vpfe_dev->buffer_queue); - if (ret) - return ret; - - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - goto streamoff; - /* Get the next frame from the buffer queue */ - vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, - struct videobuf_buffer, queue); - vpfe_dev->cur_frm = vpfe_dev->next_frm; - /* Remove buffer from the buffer queue */ - list_del(&vpfe_dev->cur_frm->queue); - /* Mark state of the current frame to active */ - vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; - /* Initialize field_id and started member */ - vpfe_dev->field_id = 0; - addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); - - /* Calculate field offset */ - vpfe_calculate_offsets(vpfe_dev); - - if (vpfe_attach_irq(vpfe_dev) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Error in attaching interrupt handle\n"); - ret = -EFAULT; - goto unlock_out; - } - if (ccdc_dev->hw_ops.configure() < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "Error in configuring ccdc\n"); - ret = -EINVAL; - goto unlock_out; - } - ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); - vpfe_start_ccdc_capture(vpfe_dev); - mutex_unlock(&vpfe_dev->lock); - return ret; -unlock_out: - mutex_unlock(&vpfe_dev->lock); -streamoff: - videobuf_streamoff(&vpfe_dev->buffer_queue); - return ret; -} - -static int vpfe_streamoff(struct file *file, void *priv, - enum v4l2_buf_type buf_type) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct vpfe_fh *fh = file->private_data; - struct vpfe_subdev_info *sdinfo; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { - v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); - return -EINVAL; - } - - /* If io is allowed for this file handle, return error */ - if (!fh->io_allowed) { - v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); - return -EACCES; - } - - /* If streaming is not started, return error */ - if (!vpfe_dev->started) { - v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); - return -EINVAL; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - vpfe_stop_ccdc_capture(vpfe_dev); - vpfe_detach_irq(vpfe_dev); - - sdinfo = vpfe_dev->current_subdev; - ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, - video, s_stream, 0); - - if (ret && (ret != -ENOIOCTLCMD)) - v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); - ret = videobuf_streamoff(&vpfe_dev->buffer_queue); - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -static int vpfe_g_pixelaspect(struct file *file, void *priv, - int type, struct v4l2_fract *f) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_pixelaspect\n"); - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - /* If std_index is invalid, then just return (== 1:1 aspect) */ - if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) - return 0; - - *f = vpfe_standards[vpfe_dev->std_index].pixelaspect; - return 0; -} - -static int vpfe_g_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_selection\n"); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP: - sel->r = vpfe_dev->crop; - break; - case V4L2_SEL_TGT_CROP_DEFAULT: - case V4L2_SEL_TGT_CROP_BOUNDS: - sel->r.width = vpfe_standards[vpfe_dev->std_index].width; - sel->r.height = vpfe_standards[vpfe_dev->std_index].height; - break; - default: - return -EINVAL; - } - return 0; -} - -static int vpfe_s_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpfe_device *vpfe_dev = video_drvdata(file); - struct v4l2_rect rect = sel->r; - int ret; - - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n"); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - if (vpfe_dev->started) { - /* make sure streaming is not started */ - v4l2_err(&vpfe_dev->v4l2_dev, - "Cannot change crop when streaming is ON\n"); - return -EBUSY; - } - - ret = mutex_lock_interruptible(&vpfe_dev->lock); - if (ret) - return ret; - - if (rect.top < 0 || rect.left < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, - "doesn't support negative values for top & left\n"); - ret = -EINVAL; - goto unlock_out; - } - - /* adjust the width to 16 pixel boundary */ - rect.width = ((rect.width + 15) & ~0xf); - - /* make sure parameters are valid */ - if ((rect.left + rect.width > - vpfe_dev->std_info.active_pixels) || - (rect.top + rect.height > - vpfe_dev->std_info.active_lines)) { - v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_SELECTION params\n"); - ret = -EINVAL; - goto unlock_out; - } - ccdc_dev->hw_ops.set_image_window(&rect); - vpfe_dev->fmt.fmt.pix.width = rect.width; - vpfe_dev->fmt.fmt.pix.height = rect.height; - vpfe_dev->fmt.fmt.pix.bytesperline = - ccdc_dev->hw_ops.get_line_length(); - vpfe_dev->fmt.fmt.pix.sizeimage = - vpfe_dev->fmt.fmt.pix.bytesperline * - vpfe_dev->fmt.fmt.pix.height; - vpfe_dev->crop = rect; - sel->r = rect; -unlock_out: - mutex_unlock(&vpfe_dev->lock); - return ret; -} - -/* vpfe capture ioctl operations */ -static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { - .vidioc_querycap = vpfe_querycap, - .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, - .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, - .vidioc_enum_input = vpfe_enum_input, - .vidioc_g_input = vpfe_g_input, - .vidioc_s_input = vpfe_s_input, - .vidioc_querystd = vpfe_querystd, - .vidioc_s_std = vpfe_s_std, - .vidioc_g_std = vpfe_g_std, - .vidioc_reqbufs = vpfe_reqbufs, - .vidioc_querybuf = vpfe_querybuf, - .vidioc_qbuf = vpfe_qbuf, - .vidioc_dqbuf = vpfe_dqbuf, - .vidioc_streamon = vpfe_streamon, - .vidioc_streamoff = vpfe_streamoff, - .vidioc_g_pixelaspect = vpfe_g_pixelaspect, - .vidioc_g_selection = vpfe_g_selection, - .vidioc_s_selection = vpfe_s_selection, -}; - -static struct vpfe_device *vpfe_initialize(void) -{ - struct vpfe_device *vpfe_dev; - - /* Default number of buffers should be 3 */ - if ((numbuffers > 0) && - (numbuffers < config_params.min_numbuffers)) - numbuffers = config_params.min_numbuffers; - - /* - * Set buffer size to min buffers size if invalid buffer size is - * given - */ - if (bufsize < config_params.min_bufsize) - bufsize = config_params.min_bufsize; - - config_params.numbuffers = numbuffers; - - if (numbuffers) - config_params.device_bufsize = bufsize; - - /* Allocate memory for device objects */ - vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); - - return vpfe_dev; -} - -/* - * vpfe_probe : This function creates device entries by register - * itself to the V4L2 driver and initializes fields of each - * device objects - */ -static int vpfe_probe(struct platform_device *pdev) -{ - struct vpfe_subdev_info *sdinfo; - struct vpfe_config *vpfe_cfg; - struct resource *res1; - struct vpfe_device *vpfe_dev; - struct i2c_adapter *i2c_adap; - struct video_device *vfd; - int ret, i, j; - int num_subdevs = 0; - - /* Get the pointer to the device object */ - vpfe_dev = vpfe_initialize(); - - if (!vpfe_dev) { - v4l2_err(pdev->dev.driver, - "Failed to allocate memory for vpfe_dev\n"); - return -ENOMEM; - } - - vpfe_dev->pdev = &pdev->dev; - - if (!pdev->dev.platform_data) { - v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); - ret = -ENODEV; - goto probe_free_dev_mem; - } - - vpfe_cfg = pdev->dev.platform_data; - vpfe_dev->cfg = vpfe_cfg; - if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) { - v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); - ret = -ENOENT; - goto probe_free_dev_mem; - } - - /* Allocate memory for ccdc configuration */ - ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL); - if (!ccdc_cfg) { - ret = -ENOMEM; - goto probe_free_dev_mem; - } - - mutex_lock(&ccdc_lock); - - strscpy(ccdc_cfg->name, vpfe_cfg->ccdc, sizeof(ccdc_cfg->name)); - /* Get VINT0 irq resource */ - res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res1) { - v4l2_err(pdev->dev.driver, - "Unable to get interrupt for VINT0\n"); - ret = -ENODEV; - goto probe_free_ccdc_cfg_mem; - } - vpfe_dev->ccdc_irq0 = res1->start; - - /* Get VINT1 irq resource */ - res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - if (!res1) { - v4l2_err(pdev->dev.driver, - "Unable to get interrupt for VINT1\n"); - ret = -ENODEV; - goto probe_free_ccdc_cfg_mem; - } - vpfe_dev->ccdc_irq1 = res1->start; - - ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0, - "vpfe_capture0", vpfe_dev); - - if (0 != ret) { - v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); - goto probe_free_ccdc_cfg_mem; - } - - vfd = &vpfe_dev->video_dev; - /* Initialize field of video device */ - vfd->release = video_device_release_empty; - vfd->fops = &vpfe_fops; - vfd->ioctl_ops = &vpfe_ioctl_ops; - vfd->tvnorms = 0; - vfd->v4l2_dev = &vpfe_dev->v4l2_dev; - vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; - snprintf(vfd->name, sizeof(vfd->name), - "%s_V%d.%d.%d", - CAPTURE_DRV_NAME, - (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, - (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, - (VPFE_CAPTURE_VERSION_CODE) & 0xff); - - ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); - if (ret) { - v4l2_err(pdev->dev.driver, - "Unable to register v4l2 device.\n"); - goto probe_out_release_irq; - } - v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); - spin_lock_init(&vpfe_dev->irqlock); - spin_lock_init(&vpfe_dev->dma_queue_lock); - mutex_init(&vpfe_dev->lock); - - /* Initialize field of the device objects */ - vpfe_dev->numbuffers = config_params.numbuffers; - - /* register video device */ - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "trying to register vpfe device.\n"); - v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, - "video_dev=%p\n", &vpfe_dev->video_dev); - vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - ret = video_register_device(&vpfe_dev->video_dev, - VFL_TYPE_VIDEO, -1); - - if (ret) { - v4l2_err(pdev->dev.driver, - "Unable to register video device.\n"); - goto probe_out_v4l2_unregister; - } - - v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); - /* set the driver data in platform device */ - platform_set_drvdata(pdev, vpfe_dev); - /* set driver private data */ - video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev); - i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); - num_subdevs = vpfe_cfg->num_subdevs; - vpfe_dev->sd = kmalloc_array(num_subdevs, - sizeof(*vpfe_dev->sd), - GFP_KERNEL); - if (!vpfe_dev->sd) { - ret = -ENOMEM; - goto probe_out_video_unregister; - } - - for (i = 0; i < num_subdevs; i++) { - struct v4l2_input *inps; - - sdinfo = &vpfe_cfg->sub_devs[i]; - - /* Load up the subdevice */ - vpfe_dev->sd[i] = - v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, - i2c_adap, - &sdinfo->board_info, - NULL); - if (vpfe_dev->sd[i]) { - v4l2_info(&vpfe_dev->v4l2_dev, - "v4l2 sub device %s registered\n", - sdinfo->name); - vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; - /* update tvnorms from the sub devices */ - for (j = 0; j < sdinfo->num_inputs; j++) { - inps = &sdinfo->inputs[j]; - vfd->tvnorms |= inps->std; - } - } else { - v4l2_info(&vpfe_dev->v4l2_dev, - "v4l2 sub device %s register fails\n", - sdinfo->name); - ret = -ENXIO; - goto probe_sd_out; - } - } - - /* set first sub device as current one */ - vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; - vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler; - - /* We have at least one sub device to work with */ - mutex_unlock(&ccdc_lock); - return 0; - -probe_sd_out: - kfree(vpfe_dev->sd); -probe_out_video_unregister: - video_unregister_device(&vpfe_dev->video_dev); -probe_out_v4l2_unregister: - v4l2_device_unregister(&vpfe_dev->v4l2_dev); -probe_out_release_irq: - free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); -probe_free_ccdc_cfg_mem: - kfree(ccdc_cfg); - mutex_unlock(&ccdc_lock); -probe_free_dev_mem: - kfree(vpfe_dev); - return ret; -} - -/* - * vpfe_remove : It un-register device from V4L2 driver - */ -static int vpfe_remove(struct platform_device *pdev) -{ - struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); - - v4l2_info(pdev->dev.driver, "vpfe_remove\n"); - - free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); - kfree(vpfe_dev->sd); - v4l2_device_unregister(&vpfe_dev->v4l2_dev); - video_unregister_device(&vpfe_dev->video_dev); - kfree(vpfe_dev); - kfree(ccdc_cfg); - return 0; -} - -static int vpfe_suspend(struct device *dev) -{ - return 0; -} - -static int vpfe_resume(struct device *dev) -{ - return 0; -} - -static const struct dev_pm_ops vpfe_dev_pm_ops = { - .suspend = vpfe_suspend, - .resume = vpfe_resume, -}; - -static struct platform_driver vpfe_driver = { - .driver = { - .name = CAPTURE_DRV_NAME, - .pm = &vpfe_dev_pm_ops, - }, - .probe = vpfe_probe, - .remove = vpfe_remove, -}; - -module_platform_driver(vpfe_driver); diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h deleted file mode 100644 index 4ad53031e2f7..000000000000 --- a/include/media/davinci/vpfe_capture.h +++ /dev/null @@ -1,177 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2008-2009 Texas Instruments Inc - */ - -#ifndef _VPFE_CAPTURE_H -#define _VPFE_CAPTURE_H - -#ifdef __KERNEL__ - -/* Header files */ -#include <media/v4l2-dev.h> -#include <linux/videodev2.h> -#include <linux/clk.h> -#include <linux/i2c.h> -#include <media/v4l2-fh.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-device.h> -#include <media/videobuf-dma-contig.h> -#include <media/davinci/vpfe_types.h> - -#define VPFE_CAPTURE_NUM_DECODERS 5 - -/* Macros */ -#define VPFE_MAJOR_RELEASE 0 -#define VPFE_MINOR_RELEASE 0 -#define VPFE_BUILD 1 -#define VPFE_CAPTURE_VERSION_CODE ((VPFE_MAJOR_RELEASE << 16) | \ - (VPFE_MINOR_RELEASE << 8) | \ - VPFE_BUILD) - -#define CAPTURE_DRV_NAME "vpfe-capture" - -struct vpfe_pixel_format { - u32 pixelformat; - /* bytes per pixel */ - int bpp; -}; - -struct vpfe_std_info { - int active_pixels; - int active_lines; - /* current frame format */ - int frame_format; -}; - -struct vpfe_route { - u32 input; - u32 output; -}; - -struct vpfe_subdev_info { - /* Sub device name */ - char name[32]; - /* Sub device group id */ - int grp_id; - /* Number of inputs supported */ - int num_inputs; - /* inputs available at the sub device */ - struct v4l2_input *inputs; - /* Sub dev routing information for each input */ - struct vpfe_route *routes; - /* check if sub dev supports routing */ - int can_route; - /* ccdc bus/interface configuration */ - struct vpfe_hw_if_param ccdc_if_params; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -struct vpfe_config { - /* Number of sub devices connected to vpfe */ - int num_subdevs; - /* i2c bus adapter no */ - int i2c_adapter_id; - /* information about each subdev */ - struct vpfe_subdev_info *sub_devs; - /* evm card info */ - char *card_name; - /* ccdc name */ - char *ccdc; - /* vpfe clock */ - struct clk *vpssclk; - struct clk *slaveclk; - /* Function for Clearing the interrupt */ - void (*clr_intr)(int vdint); -}; - -struct vpfe_device { - /* V4l2 specific parameters */ - /* Identifies video device for this channel */ - struct video_device video_dev; - /* sub devices */ - struct v4l2_subdev **sd; - /* vpfe cfg */ - struct vpfe_config *cfg; - /* V4l2 device */ - struct v4l2_device v4l2_dev; - /* parent device */ - struct device *pdev; - /* number of open instances of the channel */ - u32 usrs; - /* Indicates id of the field which is being displayed */ - u32 field_id; - /* flag to indicate whether decoder is initialized */ - u8 initialized; - /* current interface type */ - struct vpfe_hw_if_param vpfe_if_params; - /* ptr to currently selected sub device */ - struct vpfe_subdev_info *current_subdev; - /* current input at the sub device */ - int current_input; - /* Keeps track of the information about the standard */ - struct vpfe_std_info std_info; - /* std index into std table */ - int std_index; - /* CCDC IRQs used when CCDC/ISIF output to SDRAM */ - unsigned int ccdc_irq0; - unsigned int ccdc_irq1; - /* number of buffers in fbuffers */ - u32 numbuffers; - /* List of buffer pointers for storing frames */ - u8 *fbuffers[VIDEO_MAX_FRAME]; - /* Pointer pointing to current v4l2_buffer */ - struct videobuf_buffer *cur_frm; - /* Pointer pointing to next v4l2_buffer */ - struct videobuf_buffer *next_frm; - /* - * This field keeps track of type of buffer exchange mechanism - * user has selected - */ - enum v4l2_memory memory; - /* Used to store pixel format */ - struct v4l2_format fmt; - /* - * used when IMP is chained to store the crop window which - * is different from the image window - */ - struct v4l2_rect crop; - /* Buffer queue used in video-buf */ - struct videobuf_queue buffer_queue; - /* Queue of filled frames */ - struct list_head dma_queue; - /* Used in video-buf */ - spinlock_t irqlock; - /* IRQ lock for DMA queue */ - spinlock_t dma_queue_lock; - /* lock used to access this structure */ - struct mutex lock; - /* number of users performing IO */ - u32 io_usrs; - /* Indicates whether streaming started */ - u8 started; - /* - * offset where second field starts from the starting of the - * buffer for field separated YCbCr formats - */ - u32 field_off; -}; - -/* File handle structure */ -struct vpfe_fh { - struct v4l2_fh fh; - struct vpfe_device *vpfe_dev; - /* Indicates whether this file handle is doing IO */ - u8 io_allowed; -}; - -struct vpfe_config_params { - u8 min_numbuffers; - u8 numbuffers; - u32 min_bufsize; - u32 device_bufsize; -}; - -#endif /* End of __KERNEL__ */ -#endif /* _DAVINCI_VPFE_H */ -- 2.29.2
