Hi, Really no idea? BR. halim Hello, I have experienced the following on my vdr machine: When changing channels quickly between encrypted channels, the card loosses cam and I get the following in my /var/log/messages: [ 67.645354] dvb_ca adapter 0: DVB CAM detected and initialised successfully [ 84.659047] budget-av: cam inserted A [ 85.656855] dvb_ca adapter 0: DVB CAM detected and initialised successfully [60706.931218] budget-av: cam inserted A [60707.485891] dvb_ca adapter 0: DVB CAM detected and initialised successfully lspci -vvv 03:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Device 0022 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=512] Kernel driver in use: budget_av I am using drivers from kernel 2.6.34. Any Ideas for solving this issue? Thx. Halim -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
