Hi Benjamin, On Tue, Sep 27, 2022 at 10:37:01AM +0200, Benjamin Mugnier wrote: > Add device tree binding for the ST VGXY61 camera sensor, and update > MAINTAINERS file. > > Signed-off-by: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> > --- > .../bindings/media/i2c/st,st-vgxy61.yaml | 112 ++++++++++++++++++ > MAINTAINERS | 9 ++ > 2 files changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml > new file mode 100644 > index 000000000000..652170367675 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml > @@ -0,0 +1,112 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (c) 2022 STMicroelectronics SA. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings > + > +maintainers: > + - Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> > + - Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx> > + > +description: |- > + STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a > + quad lanes 800Mbps per lane. > + Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16. > + Following part number are supported > + - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors. > + Maximum frame rate is 75 fps. > + - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors. > + Maximum frame rate is 60 fps. > + > +properties: > + compatible: > + const: st,st-vgxy61 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + VCORE-supply: > + description: > + Sensor digital core supply. Must be 1.2 volts. > + > + VDDIO-supply: > + description: > + Sensor digital IO supply. Must be 1.8 volts. > + > + VANA-supply: > + description: > + Sensor analog supply. Must be 2.8 volts. > + > + reset-gpios: > + description: > + Reference to the GPIO connected to the reset pin, if any. > + This is an active low signal to the vgxy61. > + > + st,strobe-gpios-polarity: > + description: > + Invert polarity of strobe GPIOs. > + type: boolean This was probably intended to be left out of this version? > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + description: > + CSI lanes to use > + items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + remote-endpoint: true > + > + required: > + - data-lanes > + > +required: > + - compatible > + - clocks > + - VCORE-supply > + - VDDIO-supply > + - VANA-supply > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + vgxy61: csi2tx@10 { > + compatible = "st,st-vgxy61"; > + reg = <0x10>; > + clocks = <&clk_ext_camera>; > + VCORE-supply = <&v1v2>; > + VDDIO-supply = <&v1v8>; > + VANA-supply = <&v2v8>; > + reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>; > + port { > + ep0: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&mipi_csi2_out>; > + }; > + }; > + }; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index a58f1fc6dd47..2e855bfdfeb7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19278,6 +19278,15 @@ S: Maintained > F: Documentation/hwmon/stpddc60.rst > F: drivers/hwmon/pmbus/stpddc60.c > > +ST VGXY61 DRIVER > +M: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> > +M: Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx> > +L: linux-media@xxxxxxxxxxxxxxx > +S: Maintained > +T: git git://linuxtv.org/media_tree.git > +F: Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml > +F: drivers/media/i2c/st-vgxy61.c > + > ST VL53L0X ToF RANGER(I2C) IIO DRIVER > M: Song Qiang <songqiang1304521@xxxxxxxxx> > L: linux-iio@xxxxxxxxxxxxxxx -- Kind regards, Sakari Ailus
