The format code is independent of mode, and each mode could support both Y10 and Y8, so disassociate the code from the mode. Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- drivers/media/i2c/ov9282.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c index 9842080cf66f..1c77b77427f0 100644 --- a/drivers/media/i2c/ov9282.c +++ b/drivers/media/i2c/ov9282.c @@ -88,7 +88,6 @@ struct ov9282_reg_list { * struct ov9282_mode - ov9282 sensor mode structure * @width: Frame width * @height: Frame height - * @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimum vertical blanking in lines @@ -100,7 +99,6 @@ struct ov9282_reg_list { struct ov9282_mode { u32 width; u32 height; - u32 code; u32 hblank; u32 vblank; u32 vblank_min; @@ -273,7 +271,6 @@ static const struct ov9282_mode supported_mode = { .vblank_max = 51540, .pclk = 160000000, .link_freq_idx = 0, - .code = MEDIA_BUS_FMT_Y10_1X10, .reg_list = { .num_of_regs = ARRAY_SIZE(mode_1280x720_regs), .regs = mode_1280x720_regs, @@ -523,7 +520,7 @@ static int ov9282_enum_mbus_code(struct v4l2_subdev *sd, if (code->index > 0) return -EINVAL; - code->code = supported_mode.code; + code->code = MEDIA_BUS_FMT_Y10_1X10; return 0; } @@ -543,7 +540,7 @@ static int ov9282_enum_frame_size(struct v4l2_subdev *sd, if (fsize->index > 0) return -EINVAL; - if (fsize->code != supported_mode.code) + if (fsize->code != MEDIA_BUS_FMT_Y10_1X10) return -EINVAL; fsize->min_width = supported_mode.width; @@ -567,7 +564,7 @@ static void ov9282_fill_pad_format(struct ov9282 *ov9282, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = MEDIA_BUS_FMT_Y10_1X10; fmt->format.field = V4L2_FIELD_NONE; fmt->format.colorspace = V4L2_COLORSPACE_RAW; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; -- 2.34.1