The sensor takes 3 supply rails - AVDD, DVDD, and DOVDD. Add hooks into the regulator framework for each of these regulators. Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- drivers/media/i2c/ov9282.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c index 2e0b315801e5..699fc5b753b4 100644 --- a/drivers/media/i2c/ov9282.c +++ b/drivers/media/i2c/ov9282.c @@ -11,6 +11,7 @@ #include <linux/i2c.h> #include <linux/module.h> #include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-fwnode.h> @@ -55,6 +56,14 @@ #define OV9282_REG_MIN 0x00 #define OV9282_REG_MAX 0xfffff +static const char * const ov9282_supply_names[] = { + "avdd", /* Analog power */ + "dovdd", /* Digital I/O power */ + "dvdd", /* Digital core power */ +}; + +#define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names) + /** * struct ov9282_reg - ov9282 sensor register * @address: Register address @@ -128,6 +137,7 @@ struct ov9282 { struct media_pad pad; struct gpio_desc *reset_gpio; struct clk *inclk; + struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES]; struct v4l2_ctrl_handler ctrl_handler; struct v4l2_ctrl *link_freq_ctrl; struct v4l2_ctrl *pclk_ctrl; @@ -767,6 +777,18 @@ static int ov9282_detect(struct ov9282 *ov9282) return 0; } +static int ov9282_configure_regulators(struct ov9282 *ov9282) +{ + unsigned int i; + + for (i = 0; i < OV9282_NUM_SUPPLIES; i++) + ov9282->supplies[i].supply = ov9282_supply_names[i]; + + return devm_regulator_bulk_get(ov9282->dev, + OV9282_NUM_SUPPLIES, + ov9282->supplies); +} + /** * ov9282_parse_hw_config() - Parse HW configuration and check if supported * @ov9282: pointer to ov9282 device @@ -803,6 +825,12 @@ static int ov9282_parse_hw_config(struct ov9282 *ov9282) return PTR_ERR(ov9282->inclk); } + ret = ov9282_configure_regulators(ov9282); + if (ret) { + dev_err(ov9282->dev, "Failed to get power regulators\n"); + return ret; + } + rate = clk_get_rate(ov9282->inclk); if (rate != OV9282_INCLK_RATE) { dev_err(ov9282->dev, "inclk frequency mismatch"); @@ -874,6 +902,12 @@ static int ov9282_power_on(struct device *dev) struct ov9282 *ov9282 = to_ov9282(sd); int ret; + ret = regulator_bulk_enable(OV9282_NUM_SUPPLIES, ov9282->supplies); + if (ret < 0) { + dev_err(dev, "Failed to enable regulators\n"); + return ret; + } + usleep_range(400, 600); gpiod_set_value_cansleep(ov9282->reset_gpio, 1); @@ -891,6 +925,8 @@ static int ov9282_power_on(struct device *dev) error_reset: gpiod_set_value_cansleep(ov9282->reset_gpio, 0); + regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); + return ret; } @@ -909,6 +945,8 @@ static int ov9282_power_off(struct device *dev) clk_disable_unprepare(ov9282->inclk); + regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); + return 0; } -- 2.34.1