Il 27/09/22 04:55, Tinghan Shen ha scritto:
Add the 2nd core(core 1) of MT8195 dual-core SCP to devicetree file.
Reserve some SRAM spaces for the core 1 image.
Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 905d1a90b406..48d457bd39b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -760,12 +760,24 @@
scp: scp@10500000 {
compatible = "mediatek,mt8195-scp";
- reg = <0 0x10500000 0 0x100000>,
+ reg = <0 0x10500000 0 0xa0000>,
<0 0x10720000 0 0xe0000>,
<0 0x10700000 0 0x8000>;
reg-names = "sram", "cfg", "l1tcm";
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x105a0000 0 0x105a0000 0x20000>;
+
+ scp_c1: scp-c1@105a0000 {
+ compatible = "mediatek,mt8195-scp-core";
+ reg = <0x105a0000 0x20000>;
+ reg-names = "sram";
+ interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
I think that the best way of describing a dual-core SCP in devicetree would
be either something like:
scp: scp@10500000 {
compatible = "mediatek,mt8195-scp";
reg = <0 0x10500000 0 0xa0000>, <0 0x105a0000 0 0x20000>,
<0 0x10720000 0 0xe0000>, <0 0x10700000 0 0x8000>;
reg-names = "sram", "sram-c1", "cfg", "l1tcm";
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
...but that may pose an issue when trying to assign different (or more instances
of the same) subnode(s) to each core... for which, I'd be more for something like:
scp: scp@10500000 {
compatible = "mediatek,mt8195-scp";
reg = <0 0x10720000 0 0xe0000>, <0 0x10700000 0 0x8000>;
reg-names = "cfg", "l1tcm";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x10500000 0x100000>;
status = "disabled";
scp_c0: scp-core@0 {
compatible = "mediatek,mt8195-scp-core";
reg = <0x0 0xa0000>;
reg-names = "sram";
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
};
scp_c1: scp-core@a0000 {
compatible = "mediatek,mt8195-scp-core";
reg = <0xa0000 0x20000>;
reg-names = "sram";
interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
};
};
Regards,
Angelo
