OK. I found the solution by looking at the sources at:
http://lxr.free-electrons.com/source/drivers/media/dvb/dvb-usb/dibusb-common.c
What needed was a rename over all sources affected:
struct dvb_usb_rc_key dibusb_rc_keys[] => struct dvb_usb_rc_key
ir_codes_dibusb_table[]
I also fixed missing renaming in dib_usb driver.
I have updated
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2/
Jan Hoogenraad wrote:
This is probably caused by the current dvb_usb_rtl2831u module using
dibusb_rc_keys, which disapperead due to IR changes.
Syncing the rtl2831-r2/ tree with the main archive cause compilation
problems in v4l/dibusb-mc.c and I suppose rtd2830u.c will not compile
anymore either.
Can somebody with knowledge on IR help me with updating the code ?
$ grep dibusb_rc_keys */*.[ch]
v4l/dibusb-mc.c: .rc_key_map = dibusb_rc_keys,
v4l/rtd2830u.c: d->props.rc_key_map = dibusb_rc_keys;
v4l/rtd2830u.c: .rc_key_map = dibusb_rc_keys,
v4l/rtd2830u.c: .rc_key_map = dibusb_rc_keys,
I addition, I'd like to get help on how to move the IR code into
http://linuxtv.org/hg/~anttip/rtl2831u
That (in all other respects much better) version has NO IR support at
all at. Adding IR to that driver, and getting it into the kernel would
solve all problems.
Thomas Holzeisen wrote:
Hi,
i am using a DVB-T USB-Stick with Realtek RTL2831 chip (14aa:0160) on
Debian Lenny having the lastest Backport kernel 2.6.32.
$ uname -a
Linux xbmc 2.6.32-bpo.5-686 #1 SMP Fri Jun 11 22:20:29 UTC 2010 i686
GNU/Linux
For v4l I took the drivers from here:
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2/
The checked out source compile and installs fine. I compiled them
starting with "make distclean". But when plugging the DVB-Stick this
happens:
[ 229.524028] usb 4-2: new high speed USB device using ehci_hcd and
address 3
[ 229.658591] usb 4-2: New USB device found, idVendor=14aa,
idProduct=0160
[ 229.661204] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 229.663841] usb 4-2: Product: DTV Receiver
[ 229.666308] usb 4-2: Manufacturer: DTV Receiver
[ 229.668826] usb 4-2: SerialNumber: 0000000000067936
[ 229.671609] usb 4-2: configuration #1 chosen from 1 choice
[ 230.266960] dvb-usb: found a 'Freecom USB 2.0 DVB-T Device' in
warm state.
[ 230.270314] dvb-usb: will pass the complete MPEG2 transport
stream to the software demuxer.
[ 230.273641] DVB: registering new adapter (Freecom USB 2.0 DVB-T
Device)
[ 230.277461] DVB: registering adapter 0 frontend 0 (Realtek
RTL2831 DVB-T)...
[ 230.282081] BUG: unable to handle kernel paging request at 02b65c40
[ 230.285794] IP: [<f7c623ba>] dvb_usb_remote_init+0x12e/0x209
[dvb_usb]
[ 230.291463] *pde = 00000000
[ 230.293969] Oops: 0002 [#1] SMP
[ 230.293969] last sysfs file:
/sys/devices/pci0000:00/0000:00:06.1/usb4/4-2/bmAttributes
[ 230.293969] Modules linked in: dvb_usb_rtl2831u(+)
dvb_usb_dibusb_common dvb_usb dib3000mc dibx000_common dvb_ttpci
dvb_core saa7146_vv videodev v4l1_compat saa7146 videobuf_dma_sg
videobuf_core ttpci_eeprom iscsi_trgt crc32c loop
snd_hda_codec_nvhdmi snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device snd
tpm_tis soundcore tpm shpchp psmouse wmi serio_raw tpm_bios
snd_page_alloc pcspkr pci_hotplug processor evdev button ir_core
nvidia(P) lirc_imon i2c_nforce2 i2c_core lirc_dev ext3 jbd mbcache
raid1 md_mod usbhid hid sg sr_mod cdrom sd_mod crc_t10dif
usb_storage ahci ata_generic libata ehci_hcd ohci_hcd scsi_mod
usbcore nls_base forcedeth thermal fan thermal_sys [last unloaded:
scsi_wait_scan]
[ 230.293969]
[ 230.293969] Pid: 3279, comm: modprobe Tainted: P
(2.6.32-bpo.5-686 #1) Point of View
[ 230.293969] EIP: 0060:[<f7c623ba>] EFLAGS: 00010246 CPU: 0
[ 230.293969] EIP is at dvb_usb_remote_init+0x12e/0x209 [dvb_usb]
[ 230.293969] EAX: 69656148 EBX: f589b000 ECX: c14c18e4 EDX: f589b018
[ 230.293969] ESI: f5904000 EDI: 000003b8 EBP: 00000077 ESP: f5851e88
[ 230.293969] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 230.293969] Process modprobe (pid: 3279, ti=f5850000
task=f5cd4400 task.ti=f5850000)
[ 230.293969] Stack:
[ 230.293969] f589b018 f5904000 f5904000 f5904864 00000001
f7c61945 f5904418 f80bb8d0
[ 230.293969] <0> f5912000 f5b8f800 f80bad88 00000000 f80bad88
00000000 f5912000 00000000
[ 230.293969] <0> f80bb894 f80ba970 f80b886d 00000000 f80ba960
f5912000 f80c8c98 f591201c
[ 230.293969] Call Trace:
[ 230.293969] [<f7c61945>] ? dvb_usb_device_init+0x515/0x51c
[dvb_usb]
[ 230.293969] [<f80b886d>] ? rtd2831u_usb_probe+0x19/0x48
[dvb_usb_rtl2831u]
[ 230.293969] [<f80c8c98>] ? usb_probe_interface+0xe7/0x130 [usbcore]
[ 230.293969] [<c11b2c22>] ? driver_probe_device+0x8a/0x11e
[ 230.293969] [<c11b2cf6>] ? __driver_attach+0x40/0x5b
[ 230.293969] [<c11b2667>] ? bus_for_each_dev+0x37/0x5f
[ 230.293969] [<c11b2af5>] ? driver_attach+0x11/0x13
[ 230.293969] [<c11b2cb6>] ? __driver_attach+0x0/0x5b
[ 230.293969] [<c11b2135>] ? bus_add_driver+0x99/0x1c2
[ 230.293969] [<c11b2f2b>] ? driver_register+0x87/0xe0
[ 230.293969] [<f80c8aa6>] ? usb_register_driver+0x5d/0xb4 [usbcore]
[ 230.293969] [<f80f6000>] ? rtd2831u_usb_module_init+0x0/0x2c
[dvb_usb_rtl2831u]
[ 230.293969] [<f80f6015>] ? rtd2831u_usb_module_init+0x15/0x2c
[dvb_usb_rtl2831u]
[ 230.293969] [<c100113e>] ? do_one_initcall+0x55/0x155
[ 230.293969] [<c1057dd7>] ? sys_init_module+0xa7/0x1d7
[ 230.293969] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 230.293969] Code: 3e c6 f7 20 74 18 8b 86 a0 00 00 00 55 ff 74 38
04 68 59 38 c6 f7 e8 1b a1 60 c9 83 c4 0c 8b 86 a0 00 00 00 8b 14 24
8b 44 38 04 <f0> 0f ab 02 45 83 c7 08 3b ae a4 00 00 00 7c c2 83 be
ac 00 00
[ 230.293969] EIP: [<f7c623ba>] dvb_usb_remote_init+0x12e/0x209
[dvb_usb] SS:ESP 0068:f5851e88
[ 230.293969] CR2: 0000000002b65c40
[ 230.663846] ---[ end trace e2ebfa1976bffdae ]---
Mostly interesting, the modules are still getting loaded:
$ lsmod | grep dvb
dvb_usb_rtl2831u 89189 15
dvb_usb_dibusb_common 4578 1 dvb_usb_rtl2831u
dvb_usb 13320 2 dvb_usb_rtl2831u,dvb_usb_dibusb_common
dib3000mc 8544 1 dvb_usb_dibusb_common
dvb_ttpci 70046 0
dvb_core 63034 2 dvb_usb,dvb_ttpci
saa7146_vv 31312 1 dvb_ttpci
saa7146 9911 2 dvb_ttpci,saa7146_vv
ttpci_eeprom 1224 1 dvb_ttpci
i2c_core 12700 8
dvb_usb,dib3000mc,dibx000_common,dvb_ttpci,videodev,ttpci_eeprom,nvidia,i2c_nforce2
usbcore 98466 10
dvb_usb_rtl2831u,dvb_usb,lirc_imon,usbhid,usb_storage,ehci_hcd,ohci_hcd
When plugging the usb-stick after boot I am able to use it as intend.
But when having it inserted during boot the system hangs up. Calling
lsusb from console causes the used console to hang up as well. Would
be great if anyone got a solution for this problem.
Best regards,
Thomas
--
To unsubscribe from this list: send the line "unsubscribe
linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Jan Hoogenraad
Hoogenraad Interface Services
Postbus 2717
3500 GS Utrecht
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
