Re: [PATCH v2 4/4] media: platform: Add Renesas RZ/G2L CRU driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thank you for the patch.

On Tue, Sep 06, 2022 at 12:04:06AM +0100, Lad Prabhakar wrote:
> Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
> 
> Based on a patch in the BSP by Hien Huynh
> <hien.huynh.px@xxxxxxxxxxx>
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v1 -> v2
> * No change
> 
> RFC v2 -> v1
> * Moved the driver to renesas folder 
> * Fixed review comments pointed by Jacopo
> 
> RFC v1 -> RFC v2
> * Dropped group
> * Dropped CSI subdev and implemented as new driver
> * Dropped "mc_" from function names
> * Moved the driver to renesas folder
> ---
>  .../media/platform/renesas/rzg2l-cru/Kconfig  |  17 +
>  .../media/platform/renesas/rzg2l-cru/Makefile |   3 +
>  .../platform/renesas/rzg2l-cru/rzg2l-core.c   | 395 ++++++++++
>  .../platform/renesas/rzg2l-cru/rzg2l-cru.h    | 152 ++++
>  .../platform/renesas/rzg2l-cru/rzg2l-dma.c    | 734 ++++++++++++++++++
>  .../platform/renesas/rzg2l-cru/rzg2l-v4l2.c   | 368 +++++++++

I'd merge those two files together, they both handle the video node.
There's a comment below that recommends adding a subdev, that should
then go to a separate file.

>  6 files changed, 1669 insertions(+)
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> 
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> index 57c40bb499df..08ff0e96b3f5 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> @@ -15,3 +15,20 @@ config VIDEO_RZG2L_CSI2
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called rzg2l-csi2.
> +
> +config VIDEO_RZG2L_CRU
> +	tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	depends on V4L_PLATFORM_DRIVERS
> +	depends on VIDEO_DEV && OF
> +	select MEDIA_CONTROLLER
> +	select V4L2_FWNODE
> +	select VIDEOBUF2_DMA_CONTIG
> +	select VIDEO_RZG2L_CSI2

Is this required, can't the CRU be used with a parallel sensor without
the CSI-2 receiver ?

> +	select VIDEO_V4L2_SUBDEV_API
> +	help
> +	  Support for Renesas RZ/G2L (and alike SoC's) Camera Receiving
> +	  Unit (CRU) driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called rzg2l-cru.
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> index 91ea97a944e6..7628809e953f 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/Makefile
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> @@ -1,3 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  
>  obj-$(CONFIG_VIDEO_RZG2L_CSI2) += rzg2l-csi2.o
> +
> +rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
> +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> new file mode 100644
> index 000000000000..b5d4110b1913
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> @@ -0,0 +1,395 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define v4l2_dev_to_cru(d)	container_of(d, struct rzg2l_cru_dev, v4l2_dev)

As this macro is only used to get the rzg2l_cru_dev pointer from the
v4l2_async_notifier pointer, you can replace it with

#define notifier_to_cru(n)	container_of(n, struct rzg2l_cru_dev, notifier)

I would also turn it into a static inline function for additional
compile-time type safety.

> +
> +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> +				      unsigned int notification)
> +{
> +	struct media_entity *entity;
> +	struct rzg2l_cru_dev *cru;
> +	struct media_pad *csi_pad;
> +	struct v4l2_subdev *sd;
> +	int ret;
> +
> +	ret = v4l2_pipeline_link_notify(link, flags, notification);
> +	if (ret)
> +		return ret;
> +
> +	/* Only care about link enablement for CRU nodes. */
> +	if (!(flags & MEDIA_LNK_FL_ENABLED))
> +		return 0;
> +
> +	cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev);
> +	/*
> +	 * Don't allow link changes if any entity in the graph is
> +	 * streaming, modifying the CHSEL register fields can disrupt
> +	 * running streams.
> +	 */
> +	media_device_for_each_entity(entity, &cru->mdev)
> +		if (media_entity_is_streaming(entity))
> +			return -EBUSY;
> +
> +	mutex_lock(&cru->mdev_lock);
> +
> +	csi_pad = media_pad_remote_pad_first(&cru->vdev.entity.pads[0]);
> +	if (csi_pad) {
> +		ret = -EMLINK;
> +		goto out;
> +	}
> +
> +	sd = media_entity_to_v4l2_subdev(link->source->entity);
> +	if (cru->csi.subdev == sd) {
> +		cru->csi.channel = link->source->index - 1;
> +		cru->is_csi = true;
> +	} else {
> +		ret = -ENODEV;
> +	}
> +
> +out:
> +	mutex_unlock(&cru->mdev_lock);
> +
> +	return ret;
> +}
> +
> +static const struct media_device_ops rzg2l_cru_media_ops = {
> +	.link_notify = rzg2l_cru_csi2_link_notify,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Group async notifier
> + */
> +
> +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +	unsigned int i;
> +	int ret;
> +
> +	ret = media_device_register(&cru->mdev);
> +	if (ret)
> +		return ret;

I'd move the v4l2_device_register() call here, as it's the V4L2
counterpart of the media device, and handling them together would be
best.

> +
> +	ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> +	if (ret) {
> +		dev_err(cru->dev, "Failed to register subdev nodes\n");
> +		return ret;
> +	}
> +
> +	if (!video_is_registered(&cru->vdev)) {

Can this happen ?

> +		ret = rzg2l_cru_v4l2_register(cru);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Create all media device links between CRU and CSI-2's. */
> +	/*
> +	 * TODO: RZ/G2L supports 4 VC0, as support for virtual channels
> +	 * should be implemented by streams API which is under development
> +	 * so for now just link it to VC0
> +	 */

The streams API won't require more links, so I'd drop the comment and
the loop and create a single link.

> +	for (i = 1; i <= 1; i++) {
> +		struct media_entity *source, *sink;
> +
> +		source = &cru->csi.subdev->entity;
> +		sink = &cru->vdev.entity;

Hmmm... I'd recommend adding a subdev to model the image processing
pipeline of the CRU, between the CSI-2 receiver and the video node. That
will help when you'll add support for parallel sensors, and it will also
be needed by the streams API to select which virtual channel to capture.

> +
> +		ret = media_create_pad_link(source, i, sink, 0, 0);
> +		if (ret) {
> +			dev_err(cru->dev, "Error adding link from %s to %s\n",
> +				source->name, sink->name);
> +			break;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> +					  struct v4l2_subdev *subdev,
> +					  struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +
> +	rzg2l_cru_v4l2_unregister(cru);
> +
> +	mutex_lock(&cru->mdev_lock);
> +
> +	if (cru->csi.asd == asd) {
> +		cru->csi.subdev = NULL;
> +		dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name);
> +	}
> +
> +	mutex_unlock(&cru->mdev_lock);
> +
> +	media_device_unregister(&cru->mdev);
> +}
> +
> +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> +					struct v4l2_subdev *subdev,
> +					struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +
> +	mutex_lock(&cru->mdev_lock);
> +
> +	if (cru->csi.asd == asd) {
> +		cru->csi.subdev = subdev;
> +		dev_dbg(cru->dev, "Bound CSI-2 %s\n", subdev->name);
> +	}
> +
> +	mutex_unlock(&cru->mdev_lock);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = {
> +	.bound = rzg2l_cru_group_notify_bound,
> +	.unbind = rzg2l_cru_group_notify_unbind,
> +	.complete = rzg2l_cru_group_notify_complete,
> +};
> +
> +static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)

The id parameter is always 0, I'd drop it.

> +{
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	struct fwnode_handle *ep, *fwnode;
> +	struct v4l2_async_subdev *asd;
> +	int ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0);
> +	if (!ep)
> +		return 0;
> +
> +	fwnode = fwnode_graph_get_remote_endpoint(ep);
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	fwnode_handle_put(ep);
> +	if (ret) {
> +		dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	if (!of_device_is_available(to_of_node(fwnode))) {
> +		dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n",
> +			to_of_node(fwnode));
> +		ret = -ENOTCONN;
> +		goto out;
> +	}
> +
> +	asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode,
> +				       struct v4l2_async_subdev);
> +	if (IS_ERR(asd)) {
> +		ret = PTR_ERR(asd);
> +		goto out;
> +	}
> +
> +	cru->csi.asd = asd;
> +
> +	dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n",
> +		to_of_node(fwnode), vep.base.id);
> +out:
> +	fwnode_handle_put(fwnode);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru)
> +{
> +	int ret;
> +
> +	v4l2_async_nf_init(&cru->notifier);
> +
> +	ret = rvin_mc_parse_of(cru, 0);
> +	if (ret)
> +		return ret;
> +
> +	cru->notifier.ops = &rzg2l_cru_async_ops;
> +
> +	if (list_empty(&cru->notifier.asd_list))
> +		return 0;
> +
> +	ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier);
> +	if (ret < 0) {
> +		dev_err(cru->dev, "Notifier registration failed\n");
> +		v4l2_async_nf_cleanup(&cru->notifier);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)

The naming is a bit weird, as this isn't related to CSI-2. I would name
the function rzg2l_cru_media_init().

> +{
> +	struct media_device *mdev = NULL;
> +	const struct of_device_id *match;
> +	int ret;
> +
> +	cru->pad.flags = MEDIA_PAD_FL_SINK;
> +	ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&cru->mdev_lock);
> +	mdev = &cru->mdev;
> +	mdev->dev = cru->dev;
> +	mdev->ops = &rzg2l_cru_media_ops;
> +
> +	match = of_match_node(cru->dev->driver->of_match_table,
> +			      cru->dev->of_node);
> +
> +	strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> +	strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> +	snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> +		 dev_name(mdev->dev));
> +
> +	cru->v4l2_dev.mdev = &cru->mdev;
> +
> +	media_device_init(mdev);
> +
> +	ret = rzg2l_cru_mc_parse_of_graph(cru);
> +	if (ret) {
> +		mutex_lock(&cru->mdev_lock);
> +		cru->v4l2_dev.mdev = NULL;
> +		mutex_unlock(&cru->mdev_lock);
> +	}
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_probe(struct platform_device *pdev)
> +{
> +	struct rzg2l_cru_dev *cru;
> +	int irq, ret;
> +
> +	cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> +	if (!cru)
> +		return -ENOMEM;
> +
> +	cru->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(cru->base))
> +		return PTR_ERR(cru->base);
> +
> +	cru->presetn = devm_reset_control_get(&pdev->dev, "presetn");
> +	if (IS_ERR(cru->presetn))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn),
> +				     "failed to get cpg presetn\n");
> +
> +	cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn");
> +	if (IS_ERR(cru->aresetn))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn),
> +				     "failed to get cpg aresetn\n");
> +
> +	cru->vclk = devm_clk_get(&pdev->dev, "vclk");
> +	if (IS_ERR(cru->vclk)) {
> +		dev_err(&pdev->dev, "Failed to get vclk");
> +		return PTR_ERR(cru->vclk);

You could use dev_err_probe() here too (as well as below).

> +	}
> +
> +	cru->pclk = devm_clk_get(&pdev->dev, "pclk");
> +	if (IS_ERR(cru->pclk)) {
> +		dev_err(&pdev->dev, "Failed to get pclk");
> +		return PTR_ERR(cru->pclk);
> +	}
> +
> +	cru->aclk = devm_clk_get(&pdev->dev, "aclk");
> +	if (IS_ERR(cru->aclk)) {
> +		dev_err(&pdev->dev, "Failed to get aclk");
> +		return PTR_ERR(cru->aclk);
> +	}
> +
> +	cru->dev = &pdev->dev;
> +	cru->info = of_device_get_match_data(&pdev->dev);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	ret = rzg2l_cru_dma_register(cru, irq);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, cru);
> +
> +	ret = rzg2l_cru_csi2_init(cru);
> +	if (ret)
> +		goto error_dma_unregister;
> +
> +	cru->num_buf = HW_BUFFER_DEFAULT;
> +	pm_suspend_ignore_children(&pdev->dev, true);
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +
> +error_dma_unregister:
> +	rzg2l_cru_dma_unregister(cru);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> +	{
> +		.compatible = "renesas,rzg2l-cru",
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> +
> +static int rzg2l_cru_remove(struct platform_device *pdev)
> +{
> +	struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +
> +	rzg2l_cru_v4l2_unregister(cru);
> +
> +	v4l2_async_nf_unregister(&cru->notifier);
> +	v4l2_async_nf_cleanup(&cru->notifier);
> +
> +	media_device_cleanup(&cru->mdev);
> +	mutex_destroy(&cru->mdev_lock);
> +	cru->v4l2_dev.mdev = NULL;

Is this needed ?

> +
> +	rzg2l_cru_dma_unregister(cru);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver rzg2l_cru_driver = {
> +	.driver = {
> +		.name = "rzg2l-cru",
> +		.of_match_table = rzg2l_cru_of_id_table,
> +	},
> +	.probe = rzg2l_cru_probe,
> +	.remove = rzg2l_cru_remove,

No PM ?

> +};
> +
> +module_platform_driver(rzg2l_cru_driver);
> +
> +MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> new file mode 100644
> index 000000000000..a834680a3200
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> @@ -0,0 +1,152 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *

Extra blank line.

> + */
> +
> +#ifndef __RZG2L_CRU__
> +#define __RZG2L_CRU__
> +
> +#include <linux/reset.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +/* Number of HW buffers */
> +#define HW_BUFFER_MAX		8
> +#define HW_BUFFER_DEFAULT	3

Could you prefix macro names with CRU_ (or RZG2L_CRU_, up to you) ?
These names are a bit generic and could lead to clashes.

> +
> +/* Address alignment mask for HW buffers */
> +#define HW_BUFFER_MASK		0x1ff
> +
> +/* Maximum number of CSI2 virtual channels */
> +#define CSI2_VCHANNEL		4
> +
> +#define CRU_MAX_INPUT_WIDTH	2800
> +#define CRU_MAX_INPUT_HEIGHT	4095
> +
> +/**
> + * enum rzg2l_cru_dma_state - DMA states
> + * @RZG2L_CRU_DMA_STOPPED:   No operation in progress
> + * @RZG2L_CRU_DMA_STARTING:  Capture starting up
> + * @RZG2L_CRU_DMA_RUNNING:   Operation in progress have buffers
> + * @RZG2L_CRU_DMA_STOPPING:  Stopping operation
> + */
> +enum rzg2l_cru_dma_state {
> +	RZG2L_CRU_DMA_STOPPED = 0,
> +	RZG2L_CRU_DMA_STARTING,
> +	RZG2L_CRU_DMA_RUNNING,
> +	RZG2L_CRU_DMA_STOPPING,
> +};
> +
> +struct rzg2l_cru_csi {
> +	struct v4l2_async_subdev *asd;
> +	struct v4l2_subdev *subdev;
> +	u32 channel;
> +};
> +
> +/**
> + * struct rzg2l_cru_dev - Renesas CRU device structure
> + * @dev:		(OF) device
> + * @base:		device I/O register space remapped to virtual memory
> + * @info:		info about CRU instance
> + *
> + * @presetn:		CRU_PRESETN reset line
> + * @aresetn:		CRU_ARESETN reset line
> + *
> + * @vclk:		CRU Main clock
> + * @pclk:		CPU Register access clock
> + * @aclk:		CRU image transfer clock
> + *
> + * @vdev:		V4L2 video device associated with CRU
> + * @v4l2_dev:		V4L2 device
> + * @ctrl_handler:	V4L2 control handler
> + * @num_buf:		Holds the current number of buffers enabled
> + * @notifier:		V4L2 asynchronous subdevs notifier
> + *
> + * @csi:		CSI info
> + * @mdev:		media device
> + * @mdev_lock:		protects the count, notifier and csi members
> + * @pad:		media pad for the video device entity
> + *
> + * @lock:		protects @queue
> + * @queue:		vb2 buffers queue
> + * @scratch:		cpu address for scratch buffer
> + * @scratch_phys:	physical address of the scratch buffer
> + *
> + * @qlock:		protects @queue_buf, @buf_list, @sequence
> + *			@state
> + * @queue_buf:		Keeps track of buffers given to HW slot
> + * @buf_list:		list of queued buffers
> + * @sequence:		V4L2 buffers sequence number
> + * @state:		keeps track of operation state
> + *
> + * @is_csi:		flag to mark the CRU as using a CSI-2 subdevice
> + *
> + * @input_is_yuv:	flag to mark the input format of CRU
> + * @output_is_yuv:	flag to mark the output format of CRU
> + *
> + * @mbus_code:		media bus format code
> + * @format:		active V4L2 pixel format
> + *
> + * @compose:		active composing
> + */
> +struct rzg2l_cru_dev {
> +	struct device *dev;
> +	void __iomem *base;
> +	const struct rzg2l_cru_info *info;
> +
> +	struct reset_control *presetn;
> +	struct reset_control *aresetn;
> +
> +	struct clk *vclk;
> +	struct clk *pclk;
> +	struct clk *aclk;
> +
> +	struct video_device vdev;
> +	struct v4l2_device v4l2_dev;
> +	u8 num_buf;
> +
> +	struct v4l2_async_notifier notifier;
> +
> +	struct rzg2l_cru_csi csi;
> +	struct media_device mdev;
> +	struct mutex mdev_lock;
> +	struct media_pad pad;
> +
> +	struct mutex lock;
> +	struct vb2_queue queue;
> +	void *scratch;
> +	dma_addr_t scratch_phys;
> +
> +	spinlock_t qlock;
> +	struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> +	struct list_head buf_list;
> +	unsigned int sequence;
> +	enum rzg2l_cru_dma_state state;
> +
> +	bool is_csi;
> +
> +	bool input_is_yuv;
> +	bool output_is_yuv;
> +
> +	u32 mbus_code;
> +	struct v4l2_pix_format format;
> +
> +	struct v4l2_rect compose;
> +};
> +
> +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> +
> +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format);
> +
> +#endif
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> new file mode 100644
> index 000000000000..44efd071f562
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> @@ -0,0 +1,734 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include "rzg2l-cru.h"
> +#include "rzg2l-csi2.h"
> +
> +/* HW CRU Registers Definition */
> +/* CRU Control Register */
> +#define CRUnCTRL			0x0
> +#define CRUnCTRL_VINSEL(x)		((x) << 0)
> +
> +/* CRU Interrupt Enable Register */
> +#define CRUnIE				0x4
> +#define CRUnIE_SFE			BIT(16)
> +#define CRUnIE_EFE			BIT(17)
> +
> +/* CRU Interrupt Status Register */
> +#define CRUnINTS			0x8
> +#define CRUnINTS_SFS			BIT(16)
> +
> +/* CRU Reset Register */
> +#define CRUnRST				0xc
> +#define CRUnRST_VRESETN			BIT(0)
> +
> +/* Memory Bank Base Address (Lower) Register for CRU Image Data */
> +#define AMnMBxADDRL(x)			(0x100 + ((x) * 8))
> +
> +/* Memory Bank Base Address (Higher) Register for CRU Image Data */
> +#define AMnMBxADDRH(x)			(0x104 + ((x) * 8))
> +
> +/* Memory Bank Enable Register for CRU Image Data */
> +#define AMnMBVALID			0x148
> +#define AMnMBVALID_MBVALID(x)		GENMASK(x, 0)
> +
> +/* Memory Bank Status Register for CRU Image Data */
> +#define AMnMBS				0x14c
> +#define AMnMBS_MBSTS			0x7
> +
> +/* AXI Master FIFO Pointer Register for CRU Image Data */
> +#define AMnFIFOPNTR			0x168
> +#define AMnFIFOPNTR_FIFOWPNTR		GENMASK(7, 0)
> +#define AMnFIFOPNTR_FIFORPNTR_Y		GENMASK(23, 16)
> +
> +/* AXI Master Transfer Stop Register for CRU Image Data */
> +#define AMnAXISTP			0x174
> +#define AMnAXISTP_AXI_STOP		BIT(0)
> +
> +/* AXI Master Transfer Stop Status Register for CRU Image Data */
> +#define AMnAXISTPACK			0x178
> +#define AMnAXISTPACK_AXI_STOP_ACK	BIT(0)
> +
> +/* CRU Image Processing Enable Register */
> +#define ICnEN				0x200
> +#define ICnEN_ICEN			BIT(0)
> +
> +/* CRU Image Processing Main Control Register */
> +#define ICnMC				0x208
> +#define ICnMC_CSCTHR			BIT(5)
> +#define ICnMC_INF_YUV8_422		(0x1e << 16)
> +#define ICnMC_INF_USER			(0x30 << 16)
> +#define ICnMC_VCSEL(x)			((x) << 22)
> +#define ICnMC_INF_MASK			GENMASK(21, 16)
> +
> +/* CRU Module Status Register */
> +#define ICnMS				0x254
> +#define ICnMS_IA			BIT(2)
> +
> +/* CRU Data Output Mode Register */
> +#define ICnDMR				0x26c
> +#define ICnDMR_YCMODE_UYVY		(1 << 4)
> +
> +#define RZG2L_TIMEOUT_MS		100
> +#define RZG2L_RETRIES			10
> +
> +struct rzg2l_cru_buffer {
> +	struct vb2_v4l2_buffer vb;
> +	struct list_head list;
> +};
> +
> +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \
> +						struct rzg2l_cru_buffer, \
> +						vb)->list)
> +
> +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> +{
> +	iowrite32(value, cru->base + offset);
> +}
> +
> +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> +{
> +	return ioread32(cru->base + offset);
> +}
> +
> +/* Need to hold qlock before calling */
> +static void return_unused_buffers(struct rzg2l_cru_dev *cru,
> +				  enum vb2_buffer_state state)
> +{
> +	struct rzg2l_cru_buffer *buf, *node;
> +	unsigned long flags;
> +	unsigned int i;
> +
> +	spin_lock_irqsave(&cru->qlock, flags);
> +	for (i = 0; i < cru->num_buf; i++) {
> +		if (cru->queue_buf[i]) {
> +			vb2_buffer_done(&cru->queue_buf[i]->vb2_buf,
> +					state);
> +			cru->queue_buf[i] = NULL;
> +		}
> +	}
> +
> +	list_for_each_entry_safe(buf, node, &cru->buf_list, list) {
> +		vb2_buffer_done(&buf->vb.vb2_buf, state);
> +		list_del(&buf->list);
> +	}
> +	spin_unlock_irqrestore(&cru->qlock, flags);
> +}
> +
> +static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
> +				 unsigned int *nplanes, unsigned int sizes[],
> +				 struct device *alloc_devs[])
> +{
> +	struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> +
> +	/* Make sure the image size is large enough. */
> +	if (*nplanes)
> +		return sizes[0] < cru->format.sizeimage ? -EINVAL : 0;
> +
> +	*nplanes = 1;
> +	sizes[0] = cru->format.sizeimage;
> +
> +	return 0;
> +};
> +
> +static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb)
> +{
> +	struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> +	unsigned long size = cru->format.sizeimage;
> +
> +	if (vb2_plane_size(vb, 0) < size) {
> +		dev_err(cru->dev, "buffer too small (%lu < %lu)\n",
> +			vb2_plane_size(vb, 0), size);
> +		return -EINVAL;
> +	}
> +
> +	vb2_set_plane_payload(vb, 0, size);
> +
> +	return 0;
> +}
> +
> +static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb)
> +{
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&cru->qlock, flags);
> +
> +	list_add_tail(to_buf_list(vbuf), &cru->buf_list);
> +
> +	spin_unlock_irqrestore(&cru->qlock, flags);
> +}
> +
> +static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
> +					struct v4l2_subdev *sd,
> +					struct media_pad *pad)
> +{
> +	struct v4l2_subdev_format fmt = {
> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> +	};
> +
> +	fmt.pad = pad->index;
> +	if (v4l2_subdev_call_state_active(sd, pad, get_fmt, &fmt))
> +		return -EPIPE;
> +
> +	if (cru->is_csi) {
> +		switch (fmt.format.code) {
> +		case MEDIA_BUS_FMT_UYVY8_1X16:
> +			break;
> +		default:
> +			return -EPIPE;
> +		}
> +	}
> +	cru->mbus_code = fmt.format.code;
> +
> +	switch (fmt.format.field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +	case V4L2_FIELD_SEQ_TB:
> +	case V4L2_FIELD_SEQ_BT:
> +		break;
> +	default:
> +		return -EPIPE;
> +	}
> +
> +	if (fmt.format.width != cru->format.width ||
> +	    fmt.format.height != cru->format.height ||
> +	    fmt.format.code != cru->mbus_code)
> +		return -EPIPE;
> +
> +	return 0;
> +}
> +
> +static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru,
> +				    int slot, dma_addr_t addr)
> +{
> +	const struct v4l2_format_info *fmt;
> +	int offsetx, offsety;
> +	dma_addr_t offset;
> +
> +	fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat);
> +
> +	/*
> +	 * There is no HW support for composition do the best we can
> +	 * by modifying the buffer offset
> +	 */
> +	offsetx = cru->compose.left * fmt->bpp[0];
> +	offsety = cru->compose.top * cru->format.bytesperline;
> +	offset = addr + offsetx + offsety;
> +
> +	/*
> +	 * The address needs to be 512 bytes aligned. Driver should never accept
> +	 * settings that do not satisfy this in the first place...
> +	 */
> +	if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
> +		return;
> +
> +	/* Currently, we just use the buffer in 32 bits address */
> +	rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset);
> +	rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0);
> +}
> +
> +/*
> + * Moves a buffer from the queue to the HW slot. If no buffer is
> + * available use the scratch buffer. The scratch buffer is never
> + * returned to userspace, its only function is to enable the capture
> + * loop to keep running.
> + */
> +static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot)
> +{
> +	struct vb2_v4l2_buffer *vbuf;
> +	struct rzg2l_cru_buffer *buf;
> +	dma_addr_t phys_addr;
> +
> +	/* A already populated slot shall never be overwritten. */
> +	if (WARN_ON(cru->queue_buf[slot]))
> +		return;
> +
> +	dev_dbg(cru->dev, "Filling HW slot: %d\n", slot);
> +
> +	if (list_empty(&cru->buf_list)) {
> +		cru->queue_buf[slot] = NULL;
> +		phys_addr = cru->scratch_phys;
> +	} else {
> +		/* Keep track of buffer we give to HW */
> +		buf = list_entry(cru->buf_list.next,
> +				 struct rzg2l_cru_buffer, list);
> +		vbuf = &buf->vb;
> +		list_del_init(to_buf_list(vbuf));
> +		cru->queue_buf[slot] = vbuf;
> +
> +		/* Setup DMA */
> +		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
> +	}
> +
> +	rzg2l_cru_set_slot_addr(cru, slot, phys_addr);
> +}
> +
> +static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
> +{
> +	unsigned int slot;
> +
> +	/*
> +	 * Set image data memory banks.
> +	 * Currently, we will use maximum address.
> +	 */
> +	rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1));
> +
> +	for (slot = 0; slot < cru->num_buf; slot++)
> +		rzg2l_cru_fill_hw_slot(cru, slot);
> +}
> +
> +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru)
> +{
> +	u32 icnmc;
> +
> +	switch (cru->mbus_code) {
> +	case MEDIA_BUS_FMT_UYVY8_1X16:
> +		icnmc = ICnMC_INF_YUV8_422;
> +		cru->input_is_yuv = true;
> +		break;
> +	default:
> +		cru->input_is_yuv = false;
> +		icnmc = ICnMC_INF_USER;
> +		break;
> +	}
> +
> +	icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK);
> +
> +	/* Set virtual channel CSI2 */
> +	icnmc |= ICnMC_VCSEL(cru->csi.channel);
> +
> +	rzg2l_cru_write(cru, ICnMC, icnmc);
> +}
> +
> +static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru)
> +{
> +	u32 icndmr;
> +
> +	if (cru->is_csi)
> +		rzg2l_cru_csi2_setup(cru);
> +
> +	/* Output format */
> +	switch (cru->format.pixelformat) {
> +	case V4L2_PIX_FMT_UYVY:
> +		icndmr = ICnDMR_YCMODE_UYVY;
> +		cru->output_is_yuv = true;
> +		break;
> +	default:
> +		dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
> +			cru->format.pixelformat);
> +		return -EINVAL;
> +	}
> +
> +	/* If input and output use same colorspace, do bypass mode */
> +	if (cru->output_is_yuv == cru->input_is_yuv)
> +		rzg2l_cru_write(cru, ICnMC,
> +				rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
> +	else
> +		rzg2l_cru_write(cru, ICnMC,
> +				rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR));
> +
> +	/* Set output data format */
> +	rzg2l_cru_write(cru, ICnDMR, icndmr);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on)
> +{
> +	struct rzg2l_csi2 *csi2 = sd_to_csi2(cru->csi.subdev);
> +	struct media_pipeline *pipe;
> +	struct v4l2_subdev *sd;
> +	struct media_pad *pad;
> +	unsigned long flags;
> +	int ret;
> +
> +	pad = media_pad_remote_pad_first(&cru->pad);
> +	if (!pad)
> +		return -EPIPE;
> +
> +	sd = media_entity_to_v4l2_subdev(pad->entity);
> +
> +	if (!on) {
> +		media_pipeline_stop(&cru->vdev.entity);
> +		return v4l2_subdev_call(sd, video, s_stream, 0);
> +	}
> +
> +	ret = rzg2l_cru_mc_validate_format(cru, sd, pad);
> +	if (ret)
> +		return ret;
> +
> +	rzg2l_csi2_dphy_setting(csi2, 1);
> +
> +	spin_lock_irqsave(&cru->qlock, flags);
> +
> +	/* Select a video input */
> +	if (cru->is_csi)
> +		rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0));
> +
> +	/* Cancel the software reset for image processing block */
> +	rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN);
> +
> +	/* Disable and clear the interrupt before using */
> +	rzg2l_cru_write(cru, CRUnIE, 0);
> +	rzg2l_cru_write(cru, CRUnINTS, 0x001f000f);
> +
> +	/* Initialize the AXI master */
> +	rzg2l_cru_initialize_axi(cru);
> +
> +	/* Initialize image convert */
> +	ret = rzg2l_cru_initialize_image_conv(cru);
> +	if (ret) {
> +		spin_unlock_irqrestore(&cru->qlock, flags);
> +		return ret;
> +	}
> +
> +	/* Enable interrupt */
> +	rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE);
> +
> +	/* Enable image processing reception */
> +	rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN);
> +
> +	spin_unlock_irqrestore(&cru->qlock, flags);
> +
> +	pipe = sd->entity.pipe ? sd->entity.pipe : &cru->vdev.pipe;
> +	ret = media_pipeline_start(&cru->vdev.entity, pipe);
> +	if (ret)
> +		return ret;
> +
> +	clk_disable_unprepare(cru->vclk);
> +
> +	rzg2l_csi2_mipi_link_setting(csi2, 1);
> +
> +	ret = clk_prepare_enable(cru->vclk);
> +	if (ret)
> +		return ret;
> +
> +	rzg2l_csi2_cmn_rstb_deassert(csi2);
> +
> +	ret = v4l2_subdev_call(sd, video, s_stream, 1);
> +	if (ret == -ENOIOCTLCMD)
> +		ret = 0;
> +	if (ret)
> +		media_pipeline_stop(&cru->vdev.entity);
> +
> +	return ret;
> +}
> +
> +static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru)
> +{
> +	struct rzg2l_csi2 *csi2 = sd_to_csi2(cru->csi.subdev);
> +	u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y;
> +	unsigned int retries = 0;
> +	unsigned long flags;
> +	u32 icnms;
> +
> +	cru->state = RZG2L_CRU_DMA_STOPPING;
> +
> +	rzg2l_cru_set_stream(cru, 0);
> +
> +	rzg2l_csi2_dphy_setting(csi2, 0);
> +
> +	rzg2l_csi2_mipi_link_setting(csi2, 0);
> +
> +	spin_lock_irqsave(&cru->qlock, flags);
> +
> +	/* Disable and clear the interrupt */
> +	rzg2l_cru_write(cru, CRUnIE, 0);
> +	rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F);
> +
> +	/* Stop the operation of image conversion */
> +	rzg2l_cru_write(cru, ICnEN, 0);
> +
> +	/* Wait for streaming to stop */
> +	while ((rzg2l_cru_read(cru, ICnMS) & ICnMS_IA) && retries++ < RZG2L_RETRIES) {
> +		spin_unlock_irqrestore(&cru->qlock, flags);
> +		msleep(RZG2L_TIMEOUT_MS);
> +		spin_lock_irqsave(&cru->qlock, flags);
> +	}
> +
> +	icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA;
> +	if (icnms)
> +		dev_err(cru->dev, "Failed stop HW, something is seriously broken\n");
> +
> +	cru->state = RZG2L_CRU_DMA_STOPPED;
> +
> +	/* Wait until the FIFO becomes empty */
> +	for (retries = 5; retries > 0; retries--) {
> +		amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR);
> +
> +		amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR;
> +		amnfifopntr_r_y =
> +			(amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16;
> +		if (amnfifopntr_w == amnfifopntr_r_y)
> +			break;
> +
> +		usleep_range(10, 20);
> +	}
> +
> +	/* Notify that FIFO is not empty here */
> +	if (!retries)
> +		dev_err(cru->dev, "Failed to empty FIFO\n");
> +
> +	/* Stop AXI bus */
> +	rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP);
> +
> +	/* Wait until the AXI bus stop */
> +	for (retries = 5; retries > 0; retries--) {
> +		if (rzg2l_cru_read(cru, AMnAXISTPACK) &
> +			AMnAXISTPACK_AXI_STOP_ACK)
> +			break;
> +
> +		usleep_range(10, 20);
> +	};
> +
> +	/* Notify that AXI bus can not stop here */
> +	if (!retries)
> +		dev_err(cru->dev, "Failed to stop AXI bus\n");
> +
> +	/* Cancel the AXI bus stop request */
> +	rzg2l_cru_write(cru, AMnAXISTP, 0);
> +
> +	/* Resets the image processing module */
> +	rzg2l_cru_write(cru, CRUnRST, 0);
> +
> +	spin_unlock_irqrestore(&cru->qlock, flags);
> +
> +	/* Set reset state */
> +	reset_control_assert(cru->aresetn);
> +}
> +
> +static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count)
> +{
> +	struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> +	int ret;
> +
> +	/* Release reset state */
> +	ret = reset_control_deassert(cru->aresetn);
> +	if (ret) {
> +		dev_err(cru->dev, "failed to deassert aresetn\n");
> +		return ret;
> +	}
> +
> +	/* Allocate scratch buffer. */
> +	cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage,
> +					  &cru->scratch_phys, GFP_KERNEL);
> +	if (!cru->scratch) {
> +		return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> +		dev_err(cru->dev, "Failed to allocate scratch buffer\n");
> +		return -ENOMEM;
> +	}
> +
> +	cru->sequence = 0;
> +
> +	ret = rzg2l_cru_set_stream(cru, 1);
> +	if (ret) {
> +		return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> +		goto out;
> +	}
> +
> +	cru->state = RZG2L_CRU_DMA_STARTING;
> +
> +	dev_dbg(cru->dev, "Starting to capture\n");
> +
> +out:
> +	if (ret)
> +		dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> +				  cru->scratch_phys);
> +
> +	return ret;
> +}
> +
> +static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq)
> +{
> +	struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> +
> +	rzg2l_cru_stop_streaming(cru);
> +
> +	/* Free scratch buffer */
> +	dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> +			  cru->scratch_phys);
> +
> +	return_unused_buffers(cru, VB2_BUF_STATE_ERROR);
> +}
> +
> +static const struct vb2_ops rzg2l_cru_qops = {
> +	.queue_setup		= rzg2l_cru_queue_setup,
> +	.buf_prepare		= rzg2l_cru_buffer_prepare,
> +	.buf_queue		= rzg2l_cru_buffer_queue,
> +	.start_streaming	= rzg2l_cru_start_streaming_vq,
> +	.stop_streaming		= rzg2l_cru_stop_streaming_vq,
> +	.wait_prepare		= vb2_ops_wait_prepare,
> +	.wait_finish		= vb2_ops_wait_finish,
> +};
> +
> +static irqreturn_t rzg2l_cru_irq(int irq, void *data)
> +{
> +	struct rzg2l_cru_dev *cru = data;
> +	unsigned int handled = 0;
> +	unsigned long flags;
> +	u32 irq_status;
> +	u32 amnmbs;
> +	int slot;
> +
> +	spin_lock_irqsave(&cru->qlock, flags);
> +
> +	irq_status = rzg2l_cru_read(cru, CRUnINTS);
> +	if (!irq_status)
> +		goto done;
> +
> +	handled = 1;
> +
> +	rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS));
> +
> +	/* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */
> +	if (cru->state == RZG2L_CRU_DMA_STOPPED) {
> +		dev_dbg(cru->dev, "IRQ while state stopped\n");
> +		goto done;
> +	}
> +
> +	/* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */
> +	if (cru->state == RZG2L_CRU_DMA_STOPPING) {
> +		if (irq_status & CRUnINTS_SFS)
> +			dev_dbg(cru->dev, "IRQ while state stopping\n");
> +		goto done;
> +	}
> +
> +	/* Prepare for capture and update state */
> +	amnmbs = rzg2l_cru_read(cru, AMnMBS);
> +	slot = amnmbs & AMnMBS_MBSTS;
> +
> +	/*
> +	 * AMnMBS.MBSTS indicates the destination of Memory Bank (MB).
> +	 * Recalculate to get the current transfer complete MB.
> +	 */
> +	if (slot == 0)
> +		slot = cru->num_buf - 1;
> +	else
> +		slot--;
> +
> +	/*
> +	 * To hand buffers back in a known order to userspace start
> +	 * to capture first from slot 0.
> +	 */
> +	if (cru->state == RZG2L_CRU_DMA_STARTING) {
> +		if (slot != 0) {
> +			dev_dbg(cru->dev, "Starting sync slot: %d\n", slot);
> +			goto done;
> +		}
> +
> +		dev_dbg(cru->dev, "Capture start synced!\n");
> +		cru->state = RZG2L_CRU_DMA_RUNNING;
> +	}
> +
> +	/* Capture frame */
> +	if (cru->queue_buf[slot]) {
> +		cru->queue_buf[slot]->field = cru->format.field;
> +		cru->queue_buf[slot]->sequence = cru->sequence;
> +		cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> +		vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf,
> +				VB2_BUF_STATE_DONE);
> +		cru->queue_buf[slot] = NULL;
> +	} else {
> +		/* Scratch buffer was used, dropping frame. */
> +		dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence);
> +	}
> +
> +	cru->sequence++;
> +
> +	/* Prepare for next frame */
> +	rzg2l_cru_fill_hw_slot(cru, slot);
> +
> +done:
> +	spin_unlock_irqrestore(&cru->qlock, flags);
> +
> +	return IRQ_RETVAL(handled);
> +}
> +
> +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru)
> +{
> +	mutex_destroy(&cru->lock);
> +
> +	v4l2_device_unregister(&cru->v4l2_dev);
> +	reset_control_assert(cru->presetn);
> +}
> +
> +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq)
> +{
> +	struct vb2_queue *q = &cru->queue;
> +	unsigned int i;
> +	int ret;
> +
> +	ret = reset_control_deassert(cru->presetn);
> +	if (ret) {
> +		dev_err(cru->dev, "failed to deassert presetn\n");
> +		return ret;
> +	}

Shouldn't this be done when starting streaming instead ?

> +
> +	/* Initialize the top-level structure */
> +	ret = v4l2_device_register(cru->dev, &cru->v4l2_dev);
> +	if (ret)
> +		return ret;
> +
> +	mutex_init(&cru->lock);
> +	INIT_LIST_HEAD(&cru->buf_list);
> +
> +	spin_lock_init(&cru->qlock);
> +
> +	cru->state = RZG2L_CRU_DMA_STOPPED;
> +
> +	for (i = 0; i < HW_BUFFER_MAX; i++)
> +		cru->queue_buf[i] = NULL;
> +
> +	/* buffer queue */
> +	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;

No VB2_READ please, that's very inefficient.

> +	q->lock = &cru->lock;
> +	q->drv_priv = cru;
> +	q->buf_struct_size = sizeof(struct rzg2l_cru_buffer);
> +	q->ops = &rzg2l_cru_qops;
> +	q->mem_ops = &vb2_dma_contig_memops;
> +	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> +	q->min_buffers_needed = 4;

Does the hardware really require 4 buffers to operate ?

> +	q->dev = cru->dev;
> +
> +	ret = vb2_queue_init(q);
> +	if (ret < 0) {
> +		dev_err(cru->dev, "failed to initialize VB2 queue\n");
> +		goto error;
> +	}
> +
> +	/* IRQ */
> +	ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED,
> +			       KBUILD_MODNAME, cru);
> +	if (ret) {
> +		dev_err(cru->dev, "failed to request irq\n");
> +		goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +	rzg2l_cru_dma_unregister(cru);
> +	return ret;
> +}
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> new file mode 100644
> index 000000000000..c565597f5769
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> @@ -0,0 +1,368 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2016 Renesas Electronics Corp.
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/clk.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-rect.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define RZG2L_CRU_DEFAULT_FORMAT	V4L2_PIX_FMT_UYVY
> +#define RZG2L_CRU_DEFAULT_WIDTH		800
> +#define RZG2L_CRU_DEFAULT_HEIGHT	600
> +#define RZG2L_CRU_DEFAULT_FIELD		V4L2_FIELD_NONE
> +#define RZG2L_CRU_DEFAULT_COLORSPACE	V4L2_COLORSPACE_SRGB
> +
> +/* -----------------------------------------------------------------------------
> + * Format Conversions
> + */
> +
> +static const struct v4l2_format_info rzg2l_cru_formats[] = {
> +	{
> +		.format = V4L2_PIX_FMT_UYVY,
> +		.bpp[0] = 2,
> +	},
> +};
> +
> +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> +		if (rzg2l_cru_formats[i].format == format)
> +			return rzg2l_cru_formats + i;
> +
> +	return NULL;
> +}
> +
> +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> +{
> +	const struct v4l2_format_info *fmt;
> +
> +	fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> +
> +	if (WARN_ON(!fmt))
> +		return -EINVAL;
> +
> +	return pix->width * fmt->bpp[0];
> +}
> +
> +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> +{
> +	return pix->bytesperline * pix->height;
> +}
> +
> +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> +				   struct v4l2_pix_format *pix)
> +{
> +	if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> +		pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> +
> +	switch (pix->field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +		break;
> +	default:
> +		pix->field = RZG2L_CRU_DEFAULT_FIELD;
> +		break;
> +	}
> +
> +	/* Limit to CRU capabilities */
> +	v4l_bound_align_image(&pix->width, 320, CRU_MAX_INPUT_WIDTH, 1,
> +			      &pix->height, 240, CRU_MAX_INPUT_HEIGHT, 2, 0);
> +
> +	pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> +	pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> +
> +	dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
> +		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +}
> +
> +static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru,
> +				 struct v4l2_pix_format *pix)
> +{
> +	/*
> +	 * The V4L2 specification clearly documents the colorspace fields
> +	 * as being set by drivers for capture devices. Using the values
> +	 * supplied by userspace thus wouldn't comply with the API. Until
> +	 * the API is updated force fixed values.
> +	 */
> +	pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> +	pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> +	pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> +	pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> +							  pix->ycbcr_enc);
> +
> +	rzg2l_cru_format_align(cru, pix);
> +}
> +
> +static int rzg2l_cru_querycap(struct file *file, void *priv,
> +			      struct v4l2_capability *cap)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> +	strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> +	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> +		 dev_name(cru->dev));
> +	return 0;
> +}
> +
> +static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv,
> +				     struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	rzg2l_cru_try_format(cru, &f->fmt.pix);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv,
> +				   struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	if (vb2_is_busy(&cru->queue))
> +		return -EBUSY;
> +
> +	rzg2l_cru_try_format(cru, &f->fmt.pix);
> +
> +	cru->format = f->fmt.pix;
> +
> +	cru->compose.top = 0;
> +	cru->compose.left = 0;
> +	cru->compose.width = cru->format.width;
> +	cru->compose.height = cru->format.height;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> +				   struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	f->fmt.pix = cru->format;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> +				      struct v4l2_fmtdesc *f)
> +{
> +	if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> +		return -EINVAL;
> +
> +	f->pixelformat = rzg2l_cru_formats[f->index].format;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> +				     const struct v4l2_event_subscription *sub)
> +{
> +	switch (sub->type) {
> +	case V4L2_EVENT_SOURCE_CHANGE:
> +		return v4l2_event_subscribe(fh, sub, 4, NULL);
> +	}
> +	return v4l2_ctrl_subscribe_event(fh, sub);
> +}
> +
> +static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = {
> +	.vidioc_querycap		= rzg2l_cru_querycap,
> +	.vidioc_try_fmt_vid_cap		= rzg2l_cru_try_fmt_vid_cap,
> +	.vidioc_g_fmt_vid_cap		= rzg2l_cru_g_fmt_vid_cap,
> +	.vidioc_s_fmt_vid_cap		= rzg2l_cru_s_fmt_vid_cap,
> +	.vidioc_enum_fmt_vid_cap	= rzg2l_cru_enum_fmt_vid_cap,
> +
> +	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
> +	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
> +	.vidioc_querybuf		= vb2_ioctl_querybuf,
> +	.vidioc_qbuf			= vb2_ioctl_qbuf,
> +	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
> +	.vidioc_expbuf			= vb2_ioctl_expbuf,
> +	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
> +	.vidioc_streamon		= vb2_ioctl_streamon,
> +	.vidioc_streamoff		= vb2_ioctl_streamoff,
> +
> +	.vidioc_log_status		= v4l2_ctrl_log_status,
> +	.vidioc_subscribe_event		= rzg2l_cru_subscribe_event,
> +	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media controller file operations
> + */
> +
> +static int rzg2l_cru_open(struct file *file)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +	int ret;
> +
> +	ret = clk_prepare_enable(cru->pclk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(cru->vclk);
> +	if (ret)
> +		goto disable_pclk;
> +
> +	ret = clk_prepare_enable(cru->aclk);
> +	if (ret)
> +		goto disable_vclk;
> +
> +	ret = mutex_lock_interruptible(&cru->lock);
> +	if (ret)
> +		goto disable_aclk;
> +
> +	file->private_data = cru;
> +	ret = v4l2_fh_open(file);
> +	if (ret)
> +		goto err_unlock;
> +
> +	ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> +	if (ret < 0)
> +		goto err_open;
> +
> +	mutex_unlock(&cru->lock);
> +
> +	return 0;
> +err_open:
> +	v4l2_fh_release(file);
> +err_unlock:
> +	mutex_unlock(&cru->lock);
> +disable_aclk:
> +	clk_disable_unprepare(cru->aclk);
> +disable_vclk:
> +	clk_disable_unprepare(cru->vclk);
> +disable_pclk:
> +	clk_disable_unprepare(cru->pclk);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_release(struct file *file)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +	int ret;
> +
> +	mutex_lock(&cru->lock);
> +
> +	/* the release helper will cleanup any on-going streaming. */
> +	ret = _vb2_fop_release(file, NULL);
> +
> +	v4l2_pipeline_pm_put(&cru->vdev.entity);
> +	clk_disable_unprepare(cru->aclk);
> +	clk_disable_unprepare(cru->vclk);
> +	clk_disable_unprepare(cru->pclk);
> +
> +	mutex_unlock(&cru->lock);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_file_operations rzg2l_cru_fops = {
> +	.owner		= THIS_MODULE,
> +	.unlocked_ioctl	= video_ioctl2,
> +	.open		= rzg2l_cru_open,
> +	.release	= rzg2l_cru_release,
> +	.poll		= vb2_fop_poll,
> +	.mmap		= vb2_fop_mmap,
> +	.read		= vb2_fop_read,
> +};
> +
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> +{
> +	if (!video_is_registered(&cru->vdev))
> +		return;
> +
> +	v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> +		  video_device_node_name(&cru->vdev));

You can use dev_info(), but I'd actually use dev_dbg(). Same below.

> +
> +	/* Checks internally if vdev have been init or not */
> +	video_unregister_device(&cru->vdev);
> +}
> +
> +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> +			     unsigned int notification, void *arg)
> +{
> +	struct rzg2l_cru_dev *cru =
> +		container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> +	struct v4l2_subdev *remote;
> +	struct media_pad *pad;
> +
> +	pad = media_pad_remote_pad_first(&cru->pad);
> +	if (!pad)
> +		return;
> +
> +	remote = media_entity_to_v4l2_subdev(pad->entity);
> +	if (remote != sd)
> +		return;
> +
> +	switch (notification) {
> +	case V4L2_DEVICE_NOTIFY_EVENT:
> +		v4l2_event_queue(&cru->vdev, arg);
> +		break;
> +	}
> +}

Drop this, userspace should listen for events on the subdevices that
generate them.

> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> +{
> +	struct video_device *vdev = &cru->vdev;
> +	int ret;
> +
> +	cru->v4l2_dev.notify = rzg2l_cru_notify;
> +
> +	/* video node */
> +	vdev->v4l2_dev = &cru->v4l2_dev;
> +	vdev->queue = &cru->queue;
> +	snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> +	vdev->release = video_device_release_empty;
> +	vdev->lock = &cru->lock;
> +	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> +			    V4L2_CAP_READWRITE;

No read/write please.

> +
> +	/* Set a default format */
> +	cru->format.pixelformat	= RZG2L_CRU_DEFAULT_FORMAT;
> +	cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> +	cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> +	cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> +	cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> +
> +	vdev->device_caps |= V4L2_CAP_IO_MC;
> +	vdev->fops = &rzg2l_cru_fops;
> +	vdev->ioctl_ops = &rzg2l_cru_ioctl_ops;
> +
> +	rzg2l_cru_format_align(cru, &cru->format);

I'd perform all this initialization in an init function called at probe
time, with only the actual registration left here, to be done at bound
time.

> +
> +	ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> +	if (ret) {
> +		dev_err(cru->dev, "Failed to register video device\n");
> +		return ret;
> +	}
> +
> +	video_set_drvdata(&cru->vdev, cru);
> +
> +	v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> +		  video_device_node_name(&cru->vdev));
> +
> +	return ret;
> +}

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux