Am Sonntag, dem 18.09.2022 um 23:12 -0300 schrieb Rafael Mendonca:
> If any of the checks related to the supported link frequencies fail,
> then
> the V4L2 fwnode resources don't get released before returning, which
> leads
> to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
> designated label.
>
> Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846
> 8M pixel camera")
> Signed-off-by: Rafael Mendonca <rafaelmendsr@xxxxxxxxx>
> ---
> drivers/media/i2c/hi846.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/hi846.c b/drivers/media/i2c/hi846.c
> index ad35c3ff3611..254031503c72 100644
> --- a/drivers/media/i2c/hi846.c
> +++ b/drivers/media/i2c/hi846.c
> @@ -2008,22 +2008,24 @@ static int hi846_parse_dt(struct hi846
> *hi846, struct device *dev)
> bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
> dev_err(dev, "number of CSI2 data lanes %d is not
> supported",
> bus_cfg.bus.mipi_csi2.num_data_lanes);
> - v4l2_fwnode_endpoint_free(&bus_cfg);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto check_hwcfg_error;
> }
>
> hi846->nr_lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
>
> if (!bus_cfg.nr_of_link_frequencies) {
> dev_err(dev, "link-frequency property not found in
> DT\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto check_hwcfg_error;
> }
>
> /* Check that link frequences for all the modes are in device
> tree */
> fq = hi846_check_link_freqs(hi846, &bus_cfg);
> if (fq) {
> dev_err(dev, "Link frequency of %lld is not
> supported\n", fq);
> - return -EINVAL;
> + ret = -EINVAL;
> + goto check_hwcfg_error;
> }
>
> v4l2_fwnode_endpoint_free(&bus_cfg);
> @@ -2044,6 +2046,10 @@ static int hi846_parse_dt(struct hi846 *hi846,
> struct device *dev)
> }
>
> return 0;
> +
> +check_hwcfg_error:
> + v4l2_fwnode_endpoint_free(&bus_cfg);
> + return ret;
> }
>
> static int hi846_probe(struct i2c_client *client)
thank you very much for the patch. lgtm,
Reviewed-by: Martin Kepplinger <martink@xxxxxxxxx>
martin
