Re: [PATCH v3] media: i2c: imx334: support lower bandwidth mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2022-09-06 at 13:53 +0530, shravan kumar wrote:
> > From: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>
> > 
> > Some platforms may not be capable of supporting the bandwidth
> > required for 12 bit or 3840x2160 resolutions.
> > 
> > Add support for dynamically selecting 10 bit and 1920x1080
> > resolutions while leaving the existing configuration as default
> > 
> > CC: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > Signed-off-by: Prakash Battu <Prakash.Battu@xxxxxxxxxxxxx>
> > Signed-off-by: Shravan Chippa <shravan.chippa@xxxxxxxxxxxxx>

Thanks for the patch!

> > ---
> > [PATCH v3]
> > Fix for warning Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > 
> > [PATCH v2]
> > Fixe for big Reported-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
> > -imx334_enum_frame_size() loop function
> > 
> > Changes Suggested by: Jacopo Mondi <jacopo@xxxxxxxxxx>
> > -renamed array codes[] --> imx334_mbus_codes[]
> > -modified supported_modes[] to get higher resolution first
> > 
> > ---
> >  drivers/media/i2c/imx334.c | 305 +++++++++++++++++++++++++++++++++----
> >  1 file changed, 279 insertions(+), 26 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> > index 062125501788..920d407aaa2d 100644
> > --- a/drivers/media/i2c/imx334.c
> > +++ b/drivers/media/i2c/imx334.c
> > @@ -79,7 +79,6 @@ struct imx334_reg_list {
> >   * struct imx334_mode - imx334 sensor mode structure
> >   * @width: Frame width
> >   * @height: Frame height
> > - * @code: Format code
> >   * @hblank: Horizontal blanking in lines
> >   * @vblank: Vertical blanking in lines
> >   * @vblank_min: Minimal vertical blanking in lines
> > @@ -91,7 +90,6 @@ struct imx334_reg_list {
> >  struct imx334_mode {
> >         u32 width;
> >         u32 height;
> > -       u32 code;
> >         u32 hblank;
> >         u32 vblank;
> >         u32 vblank_min;
> > @@ -119,6 +117,7 @@ struct imx334_mode {
> >   * @vblank: Vertical blanking in lines
> >   * @cur_mode: Pointer to current selected sensor mode
> >   * @mutex: Mutex for serializing sensor controls
> > + * @cur_code: current selected format code
> >   * @streaming: Flag indicating streaming state
> >   */
> >  struct imx334 {
> > @@ -140,6 +139,7 @@ struct imx334 {
> >         u32 vblank;
> >         const struct imx334_mode *cur_mode;
> >         struct mutex mutex;
> > +       u32 cur_code;
> >         bool streaming;
> >  };
> >  
> > @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> >         IMX334_LINK_FREQ,
> >  };
> >  
> > +/* Sensor mode registers */
> > +static const struct imx334_reg mode_1920x1080_regs[] = {
> > +       {0x3000, 0x01},
> > +       {0x3018, 0x04},
> > +       {0x3030, 0xCA},
> > +       {0x3031, 0x08},
> > +       {0x3032, 0x00},
> > +       {0x3034, 0x4C},
> > +       {0x3035, 0x04},
> > +       {0x302C, 0xF0},
> > +       {0x302D, 0x03},
> > +       {0x302E, 0x80},
> > +       {0x302F, 0x07},
> > +       {0x3074, 0xCC},
> > +       {0x3075, 0x02},
> > +       {0x308E, 0xCD},
> > +       {0x308F, 0x02},
> > +       {0x3076, 0x38},
> > +       {0x3077, 0x04},
> > +       {0x3090, 0x38},
> > +       {0x3091, 0x04},
> > +       {0x3308, 0x38},
> > +       {0x3309, 0x04},
> > +       {0x30C6, 0x00},
> > +       {0x30C7, 0x00},
> > +       {0x30CE, 0x00},
> > +       {0x30CF, 0x00},
> > +       {0x30D8, 0x18},
> > +       {0x30D9, 0x0A},
> > +       {0x304C, 0x00},
> > +       {0x304E, 0x00},
> > +       {0x304F, 0x00},
> > +       {0x3050, 0x00},
> > +       {0x30B6, 0x00},
> > +       {0x30B7, 0x00},
> > +       {0x3116, 0x08},
> > +       {0x3117, 0x00},
> > +       {0x31A0, 0x20},
> > +       {0x31A1, 0x0F},
> > +       {0x300C, 0x3B},
> > +       {0x300D, 0x29},
> > +       {0x314C, 0x29},
> > +       {0x314D, 0x01},
> > +       {0x315A, 0x0A},
> > +       {0x3168, 0xA0},
> > +       {0x316A, 0x7E},
> > +       {0x319E, 0x02},
> > +       {0x3199, 0x00},
> > +       {0x319D, 0x00},
> > +       {0x31DD, 0x03},
> > +       {0x3300, 0x00},
> > +       {0x341C, 0xFF},
> > +       {0x341D, 0x01},
> > +       {0x3A01, 0x03},
> > +       {0x3A18, 0x7F},
> > +       {0x3A19, 0x00},
> > +       {0x3A1A, 0x37},
> > +       {0x3A1B, 0x00},
> > +       {0x3A1C, 0x37},
> > +       {0x3A1D, 0x00},
> > +       {0x3A1E, 0xF7},
> > +       {0x3A1F, 0x00},
> > +       {0x3A20, 0x3F},
> > +       {0x3A21, 0x00},
> > +       {0x3A20, 0x6F},
> > +       {0x3A21, 0x00},
> > +       {0x3A20, 0x3F},
> > +       {0x3A21, 0x00},
> > +       {0x3A20, 0x5F},
> > +       {0x3A21, 0x00},
> > +       {0x3A20, 0x2F},
> > +       {0x3A21, 0x00},
> > +       {0x3078, 0x02},
> > +       {0x3079, 0x00},
> > +       {0x307A, 0x00},
> > +       {0x307B, 0x00},
> > +       {0x3080, 0x02},
> > +       {0x3081, 0x00},
> > +       {0x3082, 0x00},
> > +       {0x3083, 0x00},
> > +       {0x3088, 0x02},
> > +       {0x3094, 0x00},
> > +       {0x3095, 0x00},
> > +       {0x3096, 0x00},
> > +       {0x309B, 0x02},
> > +       {0x309C, 0x00},
> > +       {0x309D, 0x00},
> > +       {0x309E, 0x00},
> > +       {0x30A4, 0x00},
> > +       {0x30A5, 0x00},
> > +       {0x3288, 0x21},
> > +       {0x328A, 0x02},
> > +       {0x3414, 0x05},
> > +       {0x3416, 0x18},
> > +       {0x35AC, 0x0E},
> > +       {0x3648, 0x01},
> > +       {0x364A, 0x04},
> > +       {0x364C, 0x04},
> > +       {0x3678, 0x01},
> > +       {0x367C, 0x31},
> > +       {0x367E, 0x31},
> > +       {0x3708, 0x02},
> > +       {0x3714, 0x01},
> > +       {0x3715, 0x02},
> > +       {0x3716, 0x02},
> > +       {0x3717, 0x02},
> > +       {0x371C, 0x3D},
> > +       {0x371D, 0x3F},
> > +       {0x372C, 0x00},
> > +       {0x372D, 0x00},
> > +       {0x372E, 0x46},
> > +       {0x372F, 0x00},
> > +       {0x3730, 0x89},
> > +       {0x3731, 0x00},
> > +       {0x3732, 0x08},
> > +       {0x3733, 0x01},
> > +       {0x3734, 0xFE},
> > +       {0x3735, 0x05},
> > +       {0x375D, 0x00},
> > +       {0x375E, 0x00},
> > +       {0x375F, 0x61},
> > +       {0x3760, 0x06},
> > +       {0x3768, 0x1B},
> > +       {0x3769, 0x1B},
> > +       {0x376A, 0x1A},
> > +       {0x376B, 0x19},
> > +       {0x376C, 0x18},
> > +       {0x376D, 0x14},
> > +       {0x376E, 0x0F},
> > +       {0x3776, 0x00},
> > +       {0x3777, 0x00},
> > +       {0x3778, 0x46},
> > +       {0x3779, 0x00},
> > +       {0x377A, 0x08},
> > +       {0x377B, 0x01},
> > +       {0x377C, 0x45},
> > +       {0x377D, 0x01},
> > +       {0x377E, 0x23},
> > +       {0x377F, 0x02},
> > +       {0x3780, 0xD9},
> > +       {0x3781, 0x03},
> > +       {0x3782, 0xF5},
> > +       {0x3783, 0x06},
> > +       {0x3784, 0xA5},
> > +       {0x3788, 0x0F},
> > +       {0x378A, 0xD9},
> > +       {0x378B, 0x03},
> > +       {0x378C, 0xEB},
> > +       {0x378D, 0x05},
> > +       {0x378E, 0x87},
> > +       {0x378F, 0x06},
> > +       {0x3790, 0xF5},
> > +       {0x3792, 0x43},
> > +       {0x3794, 0x7A},
> > +       {0x3796, 0xA1},
> > +       {0x37B0, 0x37},
> > +       {0x3E04, 0x0E},
> > +       {0x30E8, 0x50},
> > +       {0x30E9, 0x00},
> > +       {0x3E04, 0x0E},
> > +       {0x3002, 0x00},
> > +};
> > +
> >  /* Sensor mode registers */
> >  static const struct imx334_reg mode_3840x2160_regs[] = {
> >         {0x3000, 0x01},
> > @@ -243,20 +406,56 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
> >         {0x3a00, 0x01},
> >  };
> >  
> > +static const struct imx334_reg raw10_framefmt_regs[] = {
> > +       {0x3050, 0x00},
> > +       {0x319D, 0x00},
> > +       {0x341C, 0xFF},
> > +       {0x341D, 0x01},
> > +};
> > +
> > +static const struct imx334_reg raw12_framefmt_regs[] = {
> > +       {0x3050, 0x01},
> > +       {0x319D, 0x01},
> > +       {0x341C, 0x47},
> > +       {0x341D, 0x00},
> > +};
> > +
> > +/*
> > + * The supported BUS formats.
> > + */
> > +static const u32 imx334_mbus_codes[] = {
> > +       MEDIA_BUS_FMT_SRGGB10_1X10,
> > +       MEDIA_BUS_FMT_SRGGB12_1X12,
> > +};
> > +
> >  /* Supported sensor mode configurations */
> > -static const struct imx334_mode supported_mode = {
> > -       .width = 3840,
> > -       .height = 2160,
> > -       .hblank = 560,
> > -       .vblank = 2340,
> > -       .vblank_min = 90,
> > -       .vblank_max = 132840,
> > -       .pclk = 594000000,
> > -       .link_freq_idx = 0,
> > -       .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> > -       .reg_list = {
> > -               .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > -               .regs = mode_3840x2160_regs,
> > +static const struct imx334_mode supported_modes[] = {
> > +       {
> > +               .width = 3840,
> > +               .height = 2160,
> > +               .hblank = 560,
> > +               .vblank = 2340,
> > +               .vblank_min = 90,
> > +               .vblank_max = 132840,
> > +               .pclk = 594000000,
> > +               .link_freq_idx = 0,
> > +               .reg_list = {
> > +                       .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > +                       .regs = mode_3840x2160_regs,
> > +               },
> > +       }, {
> > +               .width = 1920,
> > +               .height = 1080,
> > +               .hblank = 560,
> > +               .vblank = 1170,
> > +               .vblank_min = 90,
> > +               .vblank_max = 132840,
> > +               .pclk = 594000000,
> > +               .link_freq_idx = 0,
> > +               .reg_list = {
> > +                       .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> > +                       .regs = mode_1920x1080_regs,
> > +               },
> >         },
> >  };
> >  
> > @@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
> >                                  struct v4l2_subdev_state *sd_state,
> >                                  struct v4l2_subdev_mbus_code_enum *code)
> >  {
> > -       if (code->index > 0)
> > +       if (code->index >= ARRAY_SIZE(imx334_mbus_codes))
> >                 return -EINVAL;
> >  
> > -       code->code = supported_mode.code;
> > +       code->code = imx334_mbus_codes[code->index];
> >  
> >         return 0;
> >  }
> > @@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,
> >                                   struct v4l2_subdev_state *sd_state,
> >                                   struct v4l2_subdev_frame_size_enum *fsize)
> >  {
> > -       if (fsize->index > 0)
> > +       unsigned int i;
> > +
> > +       if (fsize->index >= ARRAY_SIZE(supported_modes))
> >                 return -EINVAL;
> >  
> > -       if (fsize->code != supported_mode.code)
> > +       for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); ++i) {
> > +               if (imx334_mbus_codes[i] == fsize->code)
> > +                       break;
> > +       }
> > +
> > +       if (i == ARRAY_SIZE(imx334_mbus_codes))
> >                 return -EINVAL;
> >  
> > -       fsize->min_width = supported_mode.width;
> > +       fsize->min_width = supported_modes[fsize->index].width;
> >         fsize->max_width = fsize->min_width;
> > -       fsize->min_height = supported_mode.height;
> > +       fsize->min_height = supported_modes[fsize->index].height;
> >         fsize->max_height = fsize->min_height;
> >  
> >         return 0;
> > @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334,
> >  {
> >         fmt->format.width = mode->width;
> >         fmt->format.height = mode->height;
> > -       fmt->format.code = mode->code;
> > +       fmt->format.code = imx334->cur_code;
> >         fmt->format.field = V4L2_FIELD_NONE;
> >         fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> >         fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> > @@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> >         return 0;
> >  }
> >  
> > +static int imx334_get_format_code(struct imx334 *imx334, struct v4l2_subdev_format *fmt)
> > +{
> > +       unsigned int i;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) {
> > +               if (imx334_mbus_codes[i] == fmt->format.code)
> > +                       break;
> > +       }
> > +
> > +       if (i >= ARRAY_SIZE(imx334_mbus_codes))
> > +               i = 0;

If I understand the ultimate effect of this code correctly, we fallback
to MEDIA_BUS_FMT_SRGGB10_1X10 if the specified format code is not
supported, while before this change we were always using
MEDIA_BUS_FMT_SRGGB10_1X12.

Is this intended? Would it be better to leave the same behavior as the
current driver?

> > +
> > +       return imx334_mbus_codes[i];
> > +}
> > +
> >  /**
> >   * imx334_set_pad_format() - Set subdevice pad format
> >   * @sd: pointer to imx334 V4L2 sub-device structure
> > @@ -606,10 +827,19 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> >         struct imx334 *imx334 = to_imx334(sd);
> >         const struct imx334_mode *mode;
> >         int ret = 0;
> > +       u32 code;
> >  
> >         mutex_lock(&imx334->mutex);
> >  
> > -       mode = &supported_mode;
> > +       code = imx334_get_format_code(imx334, fmt);

nitpick: you probably don't need the 'code' variable and can simply do:

   imx334->cur_code = imx334_get_format_code(imx334, fmt);

> > +
> > +       imx334->cur_code = code;
> > +
> > +       mode = v4l2_find_nearest_size(supported_modes,
> > +                                     ARRAY_SIZE(supported_modes),
> > +                                     width, height,
> > +                                     fmt->format.width, fmt->format.height);
> > +
> >         imx334_fill_pad_format(imx334, mode, fmt);
> >  
> >         if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> > @@ -617,7 +847,7 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> >  
> >                 framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> >                 *framefmt = fmt->format;
> > -       } else {
> > +       } else if (imx334->cur_mode != mode) {

This second 'if' is not used in any other driver. Is this some kind of
optimization?

If this function is called after probe() and imx334->cur_mode == mode,
I think that imx334_update_controls() will not be called for the
specified mode. I'm not sure if that's OK or not.

> >                 ret = imx334_update_controls(imx334, mode);
> >                 if (!ret)
> >                         imx334->cur_mode = mode;
> > @@ -642,11 +872,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> >         struct v4l2_subdev_format fmt = { 0 };
> >  
> >         fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> > -       imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> > +       imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);

The newly added mode is now used by this function instead of the old
one. Not sure if this is intended or not.

> >  
> >         return imx334_set_pad_format(sd, sd_state, &fmt);
> >  }
> >  
> > +static int imx334_set_framefmt(struct imx334 *imx334)
> > +{
> > +       switch (imx334->cur_code) {
> > +       case MEDIA_BUS_FMT_SRGGB10_1X10:
> > +               return imx334_write_regs(imx334, raw10_framefmt_regs,
> > +                                       ARRAY_SIZE(raw10_framefmt_regs));
> > +
> > +       case MEDIA_BUS_FMT_SRGGB12_1X12:
> > +               return imx334_write_regs(imx334, raw12_framefmt_regs,
> > +                                       ARRAY_SIZE(raw12_framefmt_regs));
> > +       }
> > +
> > +       return -EINVAL;
> > +}
> > +
> >  /**
> >   * imx334_start_streaming() - Start sensor stream
> >   * @imx334: pointer to imx334 device
> > @@ -667,6 +912,13 @@ static int imx334_start_streaming(struct imx334 *imx334)
> >                 return ret;
> >         }
> >  
> > +       ret = imx334_set_framefmt(imx334);
> > +       if (ret) {
> > +               dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> > +                       __func__, ret);
> > +               return ret;
> > +       }
> > +
> >         /* Setup handler will write actual exposure and gain */
> >         ret =  __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> >         if (ret) {
> > @@ -1037,7 +1289,8 @@ static int imx334_probe(struct i2c_client *client)
> >         }
> >  
> >         /* Set default mode to max resolution */
> > -       imx334->cur_mode = &supported_mode;
> > +       imx334->cur_mode = &supported_modes[0];
> > +       imx334->cur_code = imx334_mbus_codes[0];

imx334_mbus_codes[0] is MEDIA_BUS_FMT_SRGGB10_1X10, which means that
the default configuration will switch from 12 bits to 10 bits, despite
the commit message saying that the default configuration will stay the
same.

> >         imx334->vblank = imx334->cur_mode->vblank;
> >  
> >         ret = imx334_init_controls(imx334);





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux