The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.
Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
.../media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
index 30d6c0c5161f..340380a5f66f 100644
--- a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
+++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
@@ -519,8 +519,10 @@ static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev)
/* Media Pads */
- pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
- pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+ pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK |
+ MEDIA_PAD_FL_MUST_CONNECT;
+ pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE |
+ MEDIA_PAD_FL_MUST_CONNECT;
ret = media_entity_pads_init(&subdev->entity, SUN6I_MIPI_CSI2_PAD_COUNT,
pads);
--
2.37.3
