[PATCH 3/4] media: sun6i-mipi-csi2: Register async subdev with no sensor attached

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
 .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c     | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
index 340380a5f66f..484ac5f054d5 100644
--- a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
+++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
@@ -498,6 +498,7 @@ static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev)
 	struct v4l2_async_notifier *notifier = &bridge->notifier;
 	struct media_pad *pads = bridge->pads;
 	struct device *dev = csi2_dev->dev;
+	bool notifier_registered = false;
 	int ret;
 
 	mutex_init(&bridge->lock);
@@ -535,12 +536,17 @@ static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev)
 	notifier->ops = &sun6i_mipi_csi2_notifier_ops;
 
 	ret = sun6i_mipi_csi2_bridge_source_setup(csi2_dev);
-	if (ret)
+	if (ret && ret != -ENODEV)
 		goto error_v4l2_notifier_cleanup;
 
-	ret = v4l2_async_subdev_nf_register(subdev, notifier);
-	if (ret < 0)
-		goto error_v4l2_notifier_cleanup;
+	/* Only register the notifier when a sensor is connected. */
+	if (ret != -ENODEV) {
+		ret = v4l2_async_subdev_nf_register(subdev, notifier);
+		if (ret < 0)
+			goto error_v4l2_notifier_cleanup;
+
+		notifier_registered = true;
+	}
 
 	/* V4L2 Subdev */
 
@@ -551,7 +557,8 @@ static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev)
 	return 0;
 
 error_v4l2_notifier_unregister:
-	v4l2_async_nf_unregister(notifier);
+	if (notifier_registered)
+		v4l2_async_nf_unregister(notifier);
 
 error_v4l2_notifier_cleanup:
 	v4l2_async_nf_cleanup(notifier);
-- 
2.37.3




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux