Hi Laurent,
Thanks for doing this work.
On Wed, Sep 07, 2022 at 11:04:20PM +0300, Laurent Pinchart wrote:
> The imx7-media-csi driver, currently in staging, is ready for
> prime-time. The staging TODO file lists a few items specific to that
> driver, that are already addressed (the "all of the above" part) or can
> be addressed later:
>
> - The frame interval monitoring support is a software mechanism to
> monitor the device for unexpected stalls, and should be part of the
> V4L2 core if desired.
>
> - Restricting the support media bus formats based on the SoC integration
> only aims at reducing userspace confusion by not enumerating options
> that are known not to be possible, it won't cause regressions if
> handled later.
>
> Move the description of the media bus format restriction TODO item to
> the driver, drop the other TODO items, and move the driver out of
> staging.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
For this imx7 work everything looks ok, with one exception:
Need to update file entry in MAINTAINERS file. (also I noticed that
there isn't an entry for the imx8 csi2 in that file also, but that is
a different story).
With that fixed:
Acked-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
Cheers,
Rui
> ---
> MAINTAINERS | 2 +-
> drivers/media/platform/nxp/Kconfig | 13 +++++++++
> drivers/media/platform/nxp/Makefile | 1 +
> .../platform/nxp}/imx7-media-csi.c | 24 +++++++++++++++
> drivers/staging/media/imx/Kconfig | 7 -----
> drivers/staging/media/imx/Makefile | 1 -
> drivers/staging/media/imx/TODO | 29 -------------------
> 7 files changed, 39 insertions(+), 38 deletions(-)
> rename drivers/{staging/media/imx => media/platform/nxp}/imx7-media-csi.c (97%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 338c155f60ef..1dfa1d51955c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12595,7 +12595,7 @@ F: Documentation/admin-guide/media/imx7.rst
> F: Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
> F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> F: drivers/media/platform/nxp/imx-mipi-csis.c
> -F: drivers/staging/media/imx/imx7-media-csi.c
> +F: drivers/media/platform/nxp/imx7-media-csi.c
>
> MEDIA DRIVERS FOR HELENE
> M: Abylay Ospan <aospan@xxxxxxxx>
> diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig
> index 1ac0a6e91111..3aa4207bcd41 100644
> --- a/drivers/media/platform/nxp/Kconfig
> +++ b/drivers/media/platform/nxp/Kconfig
> @@ -4,6 +4,19 @@
>
> comment "NXP media platform drivers"
>
> +config VIDEO_IMX7_CSI
> + tristate "NXP CSI Bridge driver"
> + depends on ARCH_MXC || COMPILE_TEST
> + depends on HAS_DMA
> + depends on VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select V4L2_FWNODE
> + select VIDEOBUF2_DMA_CONTIG
> + select VIDEO_V4L2_SUBDEV_API
> + help
> + Driver for the NXP Camera Sensor Interface (CSI) Bridge. This device
> + is found in the i.MX6UL/L, i.MX7 and i.MX8M[MQ] SoCs.
> +
> config VIDEO_IMX_MIPI_CSIS
> tristate "NXP MIPI CSI-2 CSIS receiver found on i.MX7 and i.MX8 models"
> depends on ARCH_MXC || COMPILE_TEST
> diff --git a/drivers/media/platform/nxp/Makefile b/drivers/media/platform/nxp/Makefile
> index efc38c6578ce..92cb8f4c215e 100644
> --- a/drivers/media/platform/nxp/Makefile
> +++ b/drivers/media/platform/nxp/Makefile
> @@ -2,6 +2,7 @@
>
> obj-y += imx-jpeg/
>
> +obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx-mipi-csis.o
> obj-$(CONFIG_VIDEO_IMX_PXP) += imx-pxp.o
> obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
> diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
> similarity index 97%
> rename from drivers/staging/media/imx/imx7-media-csi.c
> rename to drivers/media/platform/nxp/imx7-media-csi.c
> index 21d6e56ffcd4..72de9fc9862a 100644
> --- a/drivers/staging/media/imx/imx7-media-csi.c
> +++ b/drivers/media/platform/nxp/imx7-media-csi.c
> @@ -807,6 +807,30 @@ static irqreturn_t imx7_csi_irq_handler(int irq, void *data)
> * List of supported pixel formats for the subdevs. Keep V4L2_PIX_FMT_UYVY and
> * MEDIA_BUS_FMT_UYVY8_2X8 first to match IMX7_CSI_DEF_PIX_FORMAT and
> * IMX7_CSI_DEF_MBUS_CODE.
> + *
> + * TODO: Restrict the supported formats list based on the SoC integration.
> + *
> + * The CSI bridge can be configured to sample pixel components from the Rx queue
> + * in single (8bpp) or double (16bpp) component modes. Image format variants
> + * with different sample sizes (ie YUYV_2X8 vs YUYV_1X16) determine the pixel
> + * components sampling size per each clock cycle and their packing mode (see
> + * imx7_csi_configure() for details).
> + *
> + * As the CSI bridge can be interfaced with different IP blocks depending on the
> + * SoC model it is integrated on, the Rx queue sampling size should match the
> + * size of the samples transferred by the transmitting IP block. To avoid
> + * misconfigurations of the capture pipeline, the enumeration of the supported
> + * formats should be restricted to match the pixel source transmitting mode.
> + *
> + * Example: i.MX8MM SoC integrates the CSI bridge with the Samsung CSIS CSI-2
> + * receiver which operates in dual pixel sampling mode. The CSI bridge should
> + * only expose the 1X16 formats variant which instructs it to operate in dual
> + * pixel sampling mode. When the CSI bridge is instead integrated on an i.MX7,
> + * which supports both serial and parallel input, it should expose both
> + * variants.
> + *
> + * This currently only applies to YUYV formats, but other formats might need to
> + * be handled in the same way.
> */
> static const struct imx7_csi_pixfmt pixel_formats[] = {
> /*** YUV formats start here ***/
> diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
> index bfb849701489..21fd79515042 100644
> --- a/drivers/staging/media/imx/Kconfig
> +++ b/drivers/staging/media/imx/Kconfig
> @@ -23,13 +23,6 @@ config VIDEO_IMX_CSI
> default y
> help
> A video4linux camera sensor interface driver for i.MX5/6.
> -
> -config VIDEO_IMX7_CSI
> - tristate "i.MX6UL/L / i.MX7 / i.MX8M Camera Sensor Interface driver"
> - default y
> - help
> - Enable support for video4linux camera sensor interface driver for
> - i.MX6UL/L, i.MX7 or i.MX8M.
> endmenu
> endif
>
> diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
> index cef9f30eb401..906a422aa656 100644
> --- a/drivers/staging/media/imx/Makefile
> +++ b/drivers/staging/media/imx/Makefile
> @@ -14,5 +14,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media.o
> obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media-csi.o
> obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
>
> -obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> obj-$(CONFIG_VIDEO_IMX8MQ_MIPI_CSI2) += imx8mq-mipi-csi2.o
> diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
> index 5d3a337c8702..afee26870af7 100644
> --- a/drivers/staging/media/imx/TODO
> +++ b/drivers/staging/media/imx/TODO
> @@ -23,32 +23,3 @@
> - Similarly to the legacy control handling, legacy format handling where
> formats on the video nodes are influenced by the active format of the
> connected subdev should be removed.
> -
> -- i.MX7: all of the above, since it uses the imx media core
> -
> -- i.MX7: use Frame Interval Monitor
> -
> -- imx7-media-csi: Restrict the supported formats list to the SoC version.
> -
> - The imx7 CSI bridge can be configured to sample pixel components from the Rx
> - queue in single (8bpp) or double (16bpp) component modes. Image format
> - variants with different sample sizes (ie YUYV_2X8 vs YUYV_1X16) determine the
> - pixel components sampling size per each clock cycle and their packing mode
> - (see imx7_csi_configure() for details).
> -
> - As the imx7 CSI bridge can be interfaced with different IP blocks depending on
> - the SoC model it is integrated on, the Rx queue sampling size should match
> - the size of the samples transferred by the transmitting IP block.
> -
> - To avoid mis-configurations of the capture pipeline, the enumeration of the
> - supported formats should be restricted to match the pixel source transmitting
> - mode.
> -
> - Example: i.MX8MM SoC integrates the CSI bridge with the Samsung CSIS CSI-2
> - receiver which operates in dual pixel sampling mode. The CSI bridge should
> - only expose the 1X16 formats variant which instructs it to operate in dual
> - pixel sampling mode. When the CSI bridge is instead integrated on an i.MX7,
> - which supports both serial and parallel input, it should expose both variants.
> -
> - This currently only applies to YUYV formats, but other formats might need
> - to be handled in the same way.
> --
> Regards,
>
> Laurent Pinchart
>
