Commit 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for
YUV 1X16") set BIT_MIPI_DOUBLE_CMPNT in the CR18 register for 16-bit YUV
formats in imx7_csi_configure(). The CR18 register is always updated
with read-modify-write cycles, so if a 16-bit YUV format is selected,
the bit will stay set forever, even if the format is changed. Fix it by
clearing the bit at the beginning of the imx7_csi_configure() function.
While at it, swap two of the bits being cleared to match the MSB to LSB
order. This doesn't cause any functional change.
Fixes: 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for YUV 1X16")
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/staging/media/imx/imx7-media-csi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
index 03986445c0da..21d6e56ffcd4 100644
--- a/drivers/staging/media/imx/imx7-media-csi.c
+++ b/drivers/staging/media/imx/imx7-media-csi.c
@@ -522,9 +522,9 @@ static void imx7_csi_configure(struct imx7_csi *csi)
cr18 = imx7_csi_reg_read(csi, CSI_CSICR18);
cr18 &= ~(BIT_CSI_HW_ENABLE | BIT_MIPI_DATA_FORMAT_MASK |
- BIT_DATA_FROM_MIPI | BIT_BASEADDR_CHG_ERR_EN |
- BIT_BASEADDR_SWITCH_EN | BIT_BASEADDR_SWITCH_SEL |
- BIT_DEINTERLACE_EN);
+ BIT_DATA_FROM_MIPI | BIT_MIPI_DOUBLE_CMPNT |
+ BIT_BASEADDR_CHG_ERR_EN | BIT_BASEADDR_SWITCH_SEL |
+ BIT_BASEADDR_SWITCH_EN | BIT_DEINTERLACE_EN);
if (out_pix->field == V4L2_FIELD_INTERLACED) {
cr18 |= BIT_DEINTERLACE_EN;
--
Regards,
Laurent Pinchart
