Document the CRU block found on Renesas RZ/G2L (and alike) SoCs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> --- v1 -> v2 * Dropped media prefix from subject * Dropped oneOf from compatible * Used 4 spaces for indentation in example node * Marked port0/1 as required * Updated example node * Included RB tag from Laurent RFC v2 -> v1 * Dropped endpoint stuff from port1 as suggested by Rob * Updated description for endpoint RFC v1 -> RFC v2 * Dropped CSI --- .../bindings/media/renesas,rzg2l-cru.yaml | 157 ++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml new file mode 100644 index 000000000000..df18aeacfce3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> + +description: + The CRU image processing module is a data conversion module equipped with pixel + color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and + parallel (including ITU-R BT.656) input are provided as the image sensor interface. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-cru # RZ/G2{L,LC} + - renesas,r9a07g054-cru # RZ/V2L + - const: renesas,rzg2l-cru + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: image_conv + - const: image_conv_err + - const: axi_mst_err + + clocks: + items: + - description: CRU Main clock + - description: CPU Register access clock + - description: CRU image transfer clock + + clock-names: + items: + - const: vclk + - const: pclk + - const: aclk + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_PRESETN reset terminal + - description: CRU_ARESETN reset terminal + + reset-names: + items: + - const: presetn + - const: aresetn + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing a parallel input source. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + bus-width: true + data-shift: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, describing the Image Processing module connected to the + CSI-2 receiver. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + # Device node example with CSI-2 + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0x10830000 0x400>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "vclk", "pclk", "aclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + cru_parallel_in: endpoint@0 { + reg = <0>; + remote-endpoint= <&ov5642>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + cru_csi_in: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi_cru_in>; + }; + }; + }; + }; -- 2.25.1
