Hi Dafna, On Fri, Sep 02, 2022 at 12:07:04PM +0300, Dafna Hirschfeld wrote: > On 17.08.2022 05:18, Laurent Pinchart wrote: > > Hello, > > > > This patch series fixes the Lens Shading Correction initial > > configuration on the i.MX8MP. > > > > The i.MX8MP integrates an ISP8000Nano v18.02, which unlike other > > versions currently supported by the driver, gates access to the LSC RAM > > with the ISP_CTRL.ISP_ENABLE bit. The initial LSC configuration being > > performed before the ISP gets enabled, the writes to the RAM are > > ignored, leading to incorrect results. > > > > The series starts with four small drive-by cleanups of the LSC code, and > > patch 5/5 then fixes the issue. I'm not totally thrilled by the code > > architecture, but I'm not sure why, and I have a feeling doing better > > would require a large refactoring of the ISP parameters handling. If > > anyone sees an option for a better implementation, please say so. > > > > The series is based on top of "[PATCH 0/7] media: rkisp1: Fix and > > improve color space support" ([1]). Reviews for that base series would > > thus be appreciated too. > > > > [1] https://lore.kernel.org/linux-media/20220815065235.23797-1-laurent.pinchart@xxxxxxxxxxxxxxxx > > Hi, I see that the series is also based on "[PATCH v2 00/55] media: rkisp1: Cleanups and add support" > right? I could not apply patch 5/5 because it seems to sit on top of > '[PATCH v2 49/55] media: rkisp1: Configure gasket on i.MX8MP' > Do you have a branch you can share with all the sets? Sure. You can find all pending patches for the rkisp1 at https://gitlab.com/ideasonboard/nxp/linux/-/tree/pinchartl/v6.0/isp. Commits up to and including "media: rkisp1: Zero v4l2_subdev_format fields in when validating links" are candidates for v6.1, commits starting at "dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible" need some more work. > > Laurent Pinchart (5): > > media: rkisp1: Clean up LSC configuration code > > media: rkisp1: Store LSC register values in u32 variables > > media: rkisp1: Simplify LSC x/y size and grad register macros > > media: rkisp1: Use RKISP1_CIF_ISP_LSC_GRAD_SIZE() for gradient > > registers > > media: rkisp1: Configure LSC after enabling the ISP > > > > .../platform/rockchip/rkisp1/rkisp1-common.h | 29 +- > > .../platform/rockchip/rkisp1/rkisp1-isp.c | 9 +- > > .../platform/rockchip/rkisp1/rkisp1-params.c | 378 ++++++++++-------- > > .../platform/rockchip/rkisp1/rkisp1-regs.h | 20 +- > > 4 files changed, 239 insertions(+), 197 deletions(-) -- Regards, Laurent Pinchart