Add support to report the PIXEL_RATE so a host or bridge device can ask the sensor. Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> --- drivers/media/i2c/mt9m111.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c index afc86efa9e3e..cdaf283e1309 100644 --- a/drivers/media/i2c/mt9m111.c +++ b/drivers/media/i2c/mt9m111.c @@ -908,6 +908,8 @@ static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl) return mt9m111_set_test_pattern(mt9m111, ctrl->val); case V4L2_CID_COLORFX: return mt9m111_set_colorfx(mt9m111, ctrl->val); + case V4L2_CID_PIXEL_RATE: + return 0; } return -EINVAL; @@ -1249,6 +1251,7 @@ static int mt9m111_probe(struct i2c_client *client) { struct mt9m111 *mt9m111; struct i2c_adapter *adapter = client->adapter; + unsigned long mclk_rate; int ret; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { @@ -1271,6 +1274,13 @@ static int mt9m111_probe(struct i2c_client *client) if (IS_ERR(mt9m111->clk)) return PTR_ERR(mt9m111->clk); + ret = clk_prepare_enable(mt9m111->clk); + if (ret < 0) + return ret; + + mclk_rate = clk_get_rate(mt9m111->clk); + clk_disable_unprepare(mt9m111->clk); + mt9m111->regulator = devm_regulator_get(&client->dev, "vdd"); if (IS_ERR(mt9m111->regulator)) { dev_err(&client->dev, "regulator not found: %ld\n", @@ -1285,7 +1295,7 @@ static int mt9m111_probe(struct i2c_client *client) mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; - v4l2_ctrl_handler_init(&mt9m111->hdl, 7); + v4l2_ctrl_handler_init(&mt9m111->hdl, 8); v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, @@ -1309,6 +1319,9 @@ static int mt9m111_probe(struct i2c_client *client) BIT(V4L2_COLORFX_NEGATIVE) | BIT(V4L2_COLORFX_SOLARIZATION)), V4L2_COLORFX_NONE); + v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, V4L2_CID_PIXEL_RATE, + mclk_rate, mclk_rate, 1, mclk_rate); + mt9m111->subdev.ctrl_handler = &mt9m111->hdl; if (mt9m111->hdl.error) { ret = mt9m111->hdl.error; -- 2.30.2