On 01/08/2022 23:47, Lad Prabhakar wrote: > Document the CRU block found on Renesas RZ/G2L SoC's. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > --- > RFC v2 -> v1 > * Dropped endpoint stuff from port1 as suggested by Rob > * Updated description for endpoint > > RFC v1 -> RFC v2 > * Dropped CSI > --- > .../bindings/media/renesas,rzg2l-cru.yaml | 142 ++++++++++++++++++ > 1 file changed, 142 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > new file mode 100644 > index 000000000000..d7389693dae9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > @@ -0,0 +1,142 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (C) 2022 Renesas Electronics Corp. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing > + > +maintainers: > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > + > +description: > + The CRU image processing module is a data conversion module equipped with pixel > + color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and > + parallel (including ITU-R BT.656) input are provided as the image sensor interface. > + > +properties: > + compatible: > + oneOf: No need for oneOf, unless you already have a patch adding second case to oneOf. > + - items: > + - enum: > + - renesas,r9a07g044-cru # RZ/G2{L,LC} > + - renesas,r9a07g054-cru # RZ/V2L > + - const: renesas,rzg2l-cru > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 3 > + > + interrupt-names: > + items: > + - const: image_conv > + - const: image_conv_err > + - const: axi_mst_err > + > + clocks: > + items: > + - description: CRU Main clock > + - description: CPU Register access clock > + - description: CRU image transfer clock > + > + clock-names: > + items: > + - const: vclk > + - const: pclk > + - const: aclk > + > + power-domains: > + maxItems: 1 > + > + resets: > + items: > + - description: CRU_PRESETN reset terminal > + - description: CRU_ARESETN reset terminal > + > + reset-names: > + items: > + - const: presetn > + - const: aresetn > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port node, single endpoint describing a parallel input source. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + hsync-active: true > + vsync-active: true > + bus-width: true > + data-shift: true > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Input port node, describing the Image Processing module connected to the > + CSI-2 receiver. > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - resets > + - reset-names > + - power-domains > + > +additionalProperties: false > + > +examples: > + # Device node example with CSI-2 > + - | > + #include <dt-bindings/clock/r9a07g044-cpg.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + cru: video@10830000 { > + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; Also 4-space for DTS example, please. Best regards, Krzysztof