Moi,
On Wed, Jul 27, 2022 at 01:36:35PM +0300, Tomi Valkeinen wrote:
> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> Add a helper function to translate streams between two pads of a subdev,
> using the subdev's internal routing table.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/v4l2-core/v4l2-subdev.c | 26 ++++++++++++++++++++++++++
> include/media/v4l2-subdev.h | 23 +++++++++++++++++++++++
> 2 files changed, 49 insertions(+)
>
> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> index 2fc999b1b6c1..35ddf4dbe3a9 100644
> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> @@ -1619,6 +1619,32 @@ v4l2_subdev_state_get_opposite_stream_format(struct v4l2_subdev_state *state,
> }
> EXPORT_SYMBOL_GPL(v4l2_subdev_state_get_opposite_stream_format);
>
> +u64 v4l2_subdev_state_xlate_streams(const struct v4l2_subdev_state *state,
> + u32 pad0, u32 pad1, u64 *streams)
> +{
> + const struct v4l2_subdev_krouting *routing = &state->routing;
> + struct v4l2_subdev_route *route;
> + u64 streams0 = 0;
> + u64 streams1 = 0;
> +
> + for_each_active_route(routing, route) {
> + if (route->sink_pad == pad0 && route->source_pad == pad1 &&
> + (*streams & BIT_ULL(route->sink_stream))) {
> + streams0 |= BIT_ULL(route->sink_stream);
> + streams1 |= BIT_ULL(route->source_stream);
> + }
> + if (route->source_pad == pad0 && route->sink_pad == pad1 &&
> + (*streams & BIT_ULL(route->source_stream))) {
> + streams0 |= BIT_ULL(route->source_stream);
> + streams1 |= BIT_ULL(route->sink_stream);
> + }
> + }
> +
> + *streams = streams0;
> + return streams1;
> +}
> +EXPORT_SYMBOL_GPL(v4l2_subdev_state_xlate_streams);
> +
> int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
> const struct v4l2_subdev_krouting *routing,
> enum v4l2_subdev_routing_restriction disallow)
> diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
> index f749effadde2..dd5cccc827ef 100644
> --- a/include/media/v4l2-subdev.h
> +++ b/include/media/v4l2-subdev.h
> @@ -1554,6 +1554,29 @@ struct v4l2_mbus_framefmt *
> v4l2_subdev_state_get_opposite_stream_format(struct v4l2_subdev_state *state,
> u32 pad, u32 stream);
>
> +/**
> + * v4l2_subdev_state_xlate_streams() - Translate streams from one pad to another
> + *
> + * @state: Subdevice state
> + * @pad0: The first pad
> + * @pad1: The second pad
> + * @streams: Streams bitmask on the first pad
> + *
> + * Streams on sink pads of a subdev are routed to source pads as expressed in
> + * the subdev state routing table. Stream numbers don't necessarily match on
> + * the sink and source side of a route. This function translates stream numbers
> + * on @pad0, expressed as a bitmask in @streams, to the corresponding streams
> + * on @pad1 using the routing table from the @state. It returns the stream mask
> + * on @pad1, and updates @streams with the streams that have been found in the
> + * routing table.
> + *
> + * @pad0 and @pad1 must be a sink and a source, in any order.
> + *
> + * Return: The bitmask of streams of @pad1 that are routed to @streams on @pad0.
> + */
> +u64 v4l2_subdev_state_xlate_streams(const struct v4l2_subdev_state *state,
> + u32 pad0, u32 pad1, u64 *streams);
> +
> /**
> * enum v4l2_subdev_routing_restriction - Subdevice internal routing restrictions
> *
How and where is this meant to be used?
--
Sakari Ailus
