Hi Hans,
On Thu, Jul 28, 2022 at 10:17:32AM +0200, Hans Verkuil wrote:
> On 7/15/22 15:53, Xavier Roumegue wrote:
> > Add a V4L2 mem-to-mem driver for the Vivante DW100 Dewarp Processor IP
> > core found on i.MX8MP SoC.
> >
> > The processor core applies a programmable geometrical transformation on
> > input images to correct distorsion introduced by lenses.
> > The transformation function is exposed as a grid map with 16x16 pixel
> > macroblocks indexed using X, Y vertex coordinates.
> >
> > The dewarping map can be set from application through a dedicated v4l2
> > control. If not set or invalid, the driver computes an identity map
> > prior to starting the processing engine.
> >
> > The driver supports scaling, cropping and pixel format conversion.
> >
> > Signed-off-by: Xavier Roumegue <xavier.roumegue@xxxxxxxxxxx>
> > Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/media/platform/nxp/Kconfig | 1 +
> > drivers/media/platform/nxp/Makefile | 1 +
> > drivers/media/platform/nxp/dw100/Kconfig | 17 +
> > drivers/media/platform/nxp/dw100/Makefile | 3 +
> > drivers/media/platform/nxp/dw100/dw100.c | 1683 +++++++++++++++++
> > drivers/media/platform/nxp/dw100/dw100_regs.h | 117 ++
> > 6 files changed, 1822 insertions(+)
> > create mode 100644 drivers/media/platform/nxp/dw100/Kconfig
> > create mode 100644 drivers/media/platform/nxp/dw100/Makefile
> > create mode 100644 drivers/media/platform/nxp/dw100/dw100.c
> > create mode 100644 drivers/media/platform/nxp/dw100/dw100_regs.h
> >
> > diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig
> > index 1ac0a6e91111..4c76656e353e 100644
> > --- a/drivers/media/platform/nxp/Kconfig
> > +++ b/drivers/media/platform/nxp/Kconfig
> > @@ -51,4 +51,5 @@ config VIDEO_MX2_EMMAPRP
> > memory to memory. Operations include resizing and format
> > conversion.
> >
> > +source "drivers/media/platform/nxp/dw100/Kconfig"
> > source "drivers/media/platform/nxp/imx-jpeg/Kconfig"
> > diff --git a/drivers/media/platform/nxp/Makefile b/drivers/media/platform/nxp/Makefile
> > index efc38c6578ce..22ba28ac6d63 100644
> > --- a/drivers/media/platform/nxp/Makefile
> > +++ b/drivers/media/platform/nxp/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> >
> > +obj-y += dw100/
> > obj-y += imx-jpeg/
> >
> > obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx-mipi-csis.o
> > diff --git a/drivers/media/platform/nxp/dw100/Kconfig b/drivers/media/platform/nxp/dw100/Kconfig
> > new file mode 100644
> > index 000000000000..45e01baf3b27
> > --- /dev/null
> > +++ b/drivers/media/platform/nxp/dw100/Kconfig
> > @@ -0,0 +1,17 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +
> > +config VIDEO_DW100
> > + tristate "NXP i.MX DW100 dewarper"
> > + depends on V4L_MEM2MEM_DRIVERS
> > + depends on VIDEO_DEV
> > + depends on ARCH_MXC || COMPILE_TEST
> > + select MEDIA_CONTROLLER
> > + select V4L2_MEM2MEM_DEV
> > + select VIDEOBUF2_DMA_CONTIG
> > + help
> > + DW100 is a memory-to-memory engine performing geometrical
> > + transformation on source images through a programmable dewarping map.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called dw100.
> > +
> > diff --git a/drivers/media/platform/nxp/dw100/Makefile b/drivers/media/platform/nxp/dw100/Makefile
> > new file mode 100644
> > index 000000000000..49db80589e9a
> > --- /dev/null
> > +++ b/drivers/media/platform/nxp/dw100/Makefile
> > @@ -0,0 +1,3 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +
> > +obj-$(CONFIG_VIDEO_DW100) += dw100.o
> > diff --git a/drivers/media/platform/nxp/dw100/dw100.c b/drivers/media/platform/nxp/dw100/dw100.c
> > new file mode 100644
> > index 000000000000..986ef1c9dfe3
> > --- /dev/null
> > +++ b/drivers/media/platform/nxp/dw100/dw100.c
> > @@ -0,0 +1,1683 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * DW100 Hardware dewarper
> > + *
> > + * Copyright 2022 NXP
> > + * Author: Xavier Roumegue (xavier.roumegue@xxxxxxxxxxx)
> > + *
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/debugfs.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/minmax.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-mem2mem.h>
> > +#include <media/videobuf2-dma-contig.h>
> > +
> > +#include <uapi/linux/dw100.h>
> > +
> > +#include "dw100_regs.h"
> > +
> > +#define DRV_NAME "dw100"
> > +
> > +#define DW100_MIN_W 176u
> > +#define DW100_MIN_H 144u
> > +#define DW100_MAX_W 4096u
> > +#define DW100_MAX_H 3072u
> > +#define DW100_ALIGN_W 3
> > +#define DW100_ALIGN_H 3
> > +
> > +#define DW100_BLOCK_SIZE 16
> > +
> > +#define DW100_MAX_LUT_W (DIV_ROUND_UP(DW100_MAX_W, DW100_BLOCK_SIZE) + 1)
> > +#define DW100_MIN_LUT_W (DIV_ROUND_UP(DW100_MIN_W, DW100_BLOCK_SIZE) + 1)
> > +#define DW100_MAX_LUT_H (DIV_ROUND_UP(DW100_MAX_H, DW100_BLOCK_SIZE) + 1)
> > +#define DW100_MIN_LUT_H (DIV_ROUND_UP(DW100_MIN_H, DW100_BLOCK_SIZE) + 1)
> > +#define DW100_MAX_LUT_NELEMS (DW100_MAX_LUT_W * DW100_MAX_LUT_H)
> > +#define DW100_MIN_LUT_NELEMS (DW100_MIN_LUT_W * DW100_MIN_LUT_H)
> > +
> > +/*
> > + * 16 controls have been reserved for this driver for future extension, but
> > + * let's limit the related driver allocation to the effective number of controls
> > + * in use.
> > + */
> > +#define DW100_MAX_CTRLS 1
> > +#define DW100_CTRL_DEWARPING_MAP 0
> > +
> > +enum {
> > + DW100_QUEUE_SRC = 0,
> > + DW100_QUEUE_DST = 1,
> > +};
> > +
> > +enum {
> > + DW100_FMT_CAPTURE = BIT(0),
> > + DW100_FMT_OUTPUT = BIT(1),
> > +};
> > +
> > +struct dw100_device {
> > + struct platform_device *pdev;
> > + struct v4l2_m2m_dev *m2m_dev;
> > + struct v4l2_device v4l2_dev;
> > + struct video_device vfd;
> > + struct media_device mdev;
> > + /* Video device lock */
> > + struct mutex vfd_mutex;
> > + void __iomem *mmio;
> > + struct clk_bulk_data *clks;
> > + int num_clks;
> > + struct dentry *debugfs_root;
> > +};
> > +
> > +struct dw100_q_data {
> > + struct v4l2_pix_format_mplane pix_fmt;
> > + unsigned int sequence;
> > + const struct dw100_fmt *fmt;
> > + struct v4l2_rect crop;
> > +};
> > +
> > +struct dw100_ctx {
> > + struct v4l2_fh fh;
> > + struct dw100_device *dw_dev;
> > + struct v4l2_ctrl_handler hdl;
> > + struct v4l2_ctrl *ctrls[DW100_MAX_CTRLS];
> > + /* per context m2m queue lock */
> > + struct mutex vq_mutex;
> > +
> > + /* Look Up Table for pixel remapping */
> > + unsigned int *map;
> > + dma_addr_t map_dma;
> > + size_t map_size;
> > + unsigned int map_width;
> > + unsigned int map_height;
> > + bool user_map_is_valid;
> > +
> > + /* Source and destination queue data */
> > + struct dw100_q_data q_data[2];
> > +};
> > +
> > +static const struct v4l2_frmsize_stepwise dw100_frmsize_stepwise = {
> > + .min_width = DW100_MIN_W,
> > + .min_height = DW100_MIN_H,
> > + .max_width = DW100_MAX_W,
> > + .max_height = DW100_MAX_H,
> > + .step_width = 1UL << DW100_ALIGN_W,
> > + .step_height = 1UL << DW100_ALIGN_H,
> > +};
> > +
> > +static const struct dw100_fmt {
> > + u32 fourcc;
> > + u32 types;
> > + u32 reg_format;
> > + bool reg_swap_uv;
> > +} formats[] = {
> > + {
> > + .fourcc = V4L2_PIX_FMT_NV16,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_SP,
> > + .reg_swap_uv = false,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV16M,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_SP,
> > + .reg_swap_uv = false,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV61,
> > + .types = DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_SP,
> > + .reg_swap_uv = true,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV61M,
> > + .types = DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_SP,
> > + .reg_swap_uv = true,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_YUYV,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED,
> > + .reg_swap_uv = false,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_UYVY,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED,
> > + .reg_swap_uv = true,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV12,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV420_SP,
> > + .reg_swap_uv = false,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV12M,
> > + .types = DW100_FMT_OUTPUT | DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV420_SP,
> > + .reg_swap_uv = false,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV21,
> > + .types = DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV420_SP,
> > + .reg_swap_uv = true,
> > + }, {
> > + .fourcc = V4L2_PIX_FMT_NV21M,
> > + .types = DW100_FMT_CAPTURE,
> > + .reg_format = DW100_DEWARP_CTRL_FORMAT_YUV420_SP,
> > + .reg_swap_uv = true,
> > + },
> > +};
> > +
> > +static inline int to_dw100_fmt_type(enum v4l2_buf_type type)
> > +{
> > + if (V4L2_TYPE_IS_OUTPUT(type))
> > + return DW100_FMT_OUTPUT;
> > + else
> > + return DW100_FMT_CAPTURE;
> > +}
> > +
> > +static const struct dw100_fmt *dw100_find_pixel_format(u32 pixel_format,
> > + int fmt_type)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(formats); i++) {
> > + const struct dw100_fmt *fmt = &formats[i];
> > +
> > + if (fmt->fourcc == pixel_format && fmt->types & fmt_type)
> > + return fmt;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +static const struct dw100_fmt *dw100_find_format(struct v4l2_format *f)
> > +{
> > + return dw100_find_pixel_format(f->fmt.pix_mp.pixelformat,
> > + to_dw100_fmt_type(f->type));
> > +}
> > +
> > +static inline u32 dw100_read(struct dw100_device *dw_dev, u32 reg)
> > +{
> > + return readl(dw_dev->mmio + reg);
> > +}
> > +
> > +static inline void dw100_write(struct dw100_device *dw_dev, u32 reg, u32 val)
> > +{
> > + writel(val, dw_dev->mmio + reg);
> > +}
> > +
> > +static inline int dw100_dump_regs(struct seq_file *m)
> > +{
> > + struct dw100_device *dw_dev = m->private;
> > +#define __DECLARE_REG(x) { #x, x }
> > + unsigned int i;
> > + static const struct reg_desc {
> > + const char * const name;
> > + unsigned int addr;
> > + } dw100_regs[] = {
> > + __DECLARE_REG(DW100_DEWARP_ID),
> > + __DECLARE_REG(DW100_DEWARP_CTRL),
> > + __DECLARE_REG(DW100_MAP_LUT_ADDR),
> > + __DECLARE_REG(DW100_MAP_LUT_SIZE),
> > + __DECLARE_REG(DW100_MAP_LUT_ADDR2),
> > + __DECLARE_REG(DW100_MAP_LUT_SIZE2),
> > + __DECLARE_REG(DW100_SRC_IMG_Y_BASE),
> > + __DECLARE_REG(DW100_SRC_IMG_UV_BASE),
> > + __DECLARE_REG(DW100_SRC_IMG_SIZE),
> > + __DECLARE_REG(DW100_SRC_IMG_STRIDE),
> > + __DECLARE_REG(DW100_DST_IMG_Y_BASE),
> > + __DECLARE_REG(DW100_DST_IMG_UV_BASE),
> > + __DECLARE_REG(DW100_DST_IMG_SIZE),
> > + __DECLARE_REG(DW100_DST_IMG_STRIDE),
> > + __DECLARE_REG(DW100_DST_IMG_Y_SIZE1),
> > + __DECLARE_REG(DW100_DST_IMG_UV_SIZE1),
> > + __DECLARE_REG(DW100_SRC_IMG_Y_BASE2),
> > + __DECLARE_REG(DW100_SRC_IMG_UV_BASE2),
> > + __DECLARE_REG(DW100_SRC_IMG_SIZE2),
> > + __DECLARE_REG(DW100_SRC_IMG_STRIDE2),
> > + __DECLARE_REG(DW100_DST_IMG_Y_BASE2),
> > + __DECLARE_REG(DW100_DST_IMG_UV_BASE2),
> > + __DECLARE_REG(DW100_DST_IMG_SIZE2),
> > + __DECLARE_REG(DW100_DST_IMG_STRIDE2),
> > + __DECLARE_REG(DW100_DST_IMG_Y_SIZE2),
> > + __DECLARE_REG(DW100_DST_IMG_UV_SIZE2),
> > + __DECLARE_REG(DW100_SWAP_CONTROL),
> > + __DECLARE_REG(DW100_VERTICAL_SPLIT_LINE),
> > + __DECLARE_REG(DW100_HORIZON_SPLIT_LINE),
> > + __DECLARE_REG(DW100_SCALE_FACTOR),
> > + __DECLARE_REG(DW100_ROI_START),
> > + __DECLARE_REG(DW100_BOUNDARY_PIXEL),
> > + __DECLARE_REG(DW100_INTERRUPT_STATUS),
> > + __DECLARE_REG(DW100_BUS_CTRL),
> > + __DECLARE_REG(DW100_BUS_CTRL1),
> > + __DECLARE_REG(DW100_BUS_TIME_OUT_CYCLE),
> > + };
> > +
> > + for (i = 0; i < ARRAY_SIZE(dw100_regs); i++)
> > + seq_printf(m, "%s: %#x\n", dw100_regs[i].name,
> > + dw100_read(dw_dev, dw100_regs[i].addr));
> > +
> > + return 0;
> > +}
> > +
> > +static inline struct dw100_ctx *dw100_file2ctx(struct file *file)
> > +{
> > + return container_of(file->private_data, struct dw100_ctx, fh);
> > +}
> > +
> > +static struct dw100_q_data *dw100_get_q_data(struct dw100_ctx *ctx,
> > + enum v4l2_buf_type type)
> > +{
> > + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > + return &ctx->q_data[DW100_QUEUE_SRC];
> > + else
> > + return &ctx->q_data[DW100_QUEUE_DST];
> > +}
> > +
> > +static u32 dw100_get_n_vertices_from_length(u32 length)
> > +{
> > + return DIV_ROUND_UP(length, DW100_BLOCK_SIZE) + 1;
> > +}
> > +
> > +static u16 dw100_map_convert_to_uq12_4(u32 a)
> > +{
> > + return (u16)((a & 0xfff) << 4);
> > +}
> > +
> > +static u32 dw100_map_format_coordinates(u16 xq, u16 yq)
> > +{
> > + return (u32)((yq << 16) | xq);
> > +}
> > +
> > +static u32 *dw100_get_user_map(struct dw100_ctx *ctx)
> > +{
> > + struct v4l2_ctrl *ctrl = ctx->ctrls[DW100_CTRL_DEWARPING_MAP];
> > +
> > + if (!ctx->user_map_is_valid)
> > + return NULL;
> > +
> > + return ctrl->p_cur.p_u32;
> > +}
> > +
> > +/*
> > + * Create the dewarp map from the V4L2 control. If the control hasn't been set
> > + * by the application, generate an identity mapping.
> > + *
> > + * A 16 pixels cell size grid is mapped on the destination image.
> > + * The last cells width/height might be lesser than 16 if the destination image
> > + * width/height is not divisible by 16. This dewarping grid map specifies the
> > + * source image pixel location (x, y) on each grid intersection point.
> > + * Bilinear interpolation is used to compute inner cell points locations.
> > + *
> > + * The coordinates are saved in UQ12.4 fixed point format.
> > + */
> > +static int dw100_create_mapping(struct dw100_ctx *ctx)
> > +{
> > + u32 sw, sh, dw, dh, mw, mh, i, j;
> > + u16 qx, qy, qdx, qdy, qsh, qsw;
> > + bool is_user_map = false;
> > + u32 *user_map, *map;
> > +
> > + sw = ctx->q_data[DW100_QUEUE_SRC].pix_fmt.width;
> > + dw = ctx->q_data[DW100_QUEUE_DST].pix_fmt.width;
> > + sh = ctx->q_data[DW100_QUEUE_SRC].pix_fmt.height;
> > + dh = ctx->q_data[DW100_QUEUE_DST].pix_fmt.height;
> > +
> > + mw = dw100_get_n_vertices_from_length(dw);
> > + mh = dw100_get_n_vertices_from_length(dh);
> > +
> > + qsw = dw100_map_convert_to_uq12_4(sw);
> > + qsh = dw100_map_convert_to_uq12_4(sh);
> > + qdx = qsw / (mw - 1);
> > + qdy = qsh / (mh - 1);
> > +
> > + if (ctx->map)
> > + dma_free_coherent(&ctx->dw_dev->pdev->dev, ctx->map_size,
> > + ctx->map, ctx->map_dma);
> > +
> > + ctx->map_width = mw;
> > + ctx->map_height = mh;
> > + ctx->map_size = mh * mw * sizeof(u32);
> > +
> > + ctx->map = dma_alloc_coherent(&ctx->dw_dev->pdev->dev, ctx->map_size,
> > + &ctx->map_dma, GFP_KERNEL);
> > +
> > + if (!ctx->map)
> > + return -ENOMEM;
> > +
> > + user_map = dw100_get_user_map(ctx);
> > + if (user_map) {
> > + is_user_map = true;
> > + memcpy(ctx->map, user_map, ctx->map_size);
> > + goto out;
> > + }
> > +
> > + map = ctx->map;
> > + for (i = 0, qy = 0; i < mh; i++, qy += qdy) {
> > + if (qy > qsh)
> > + qy = qsh;
> > + for (j = 0, qx = 0; j < mw; j++, qx += qdx) {
> > + if (qx > qsw)
> > + qx = qsw;
> > + *map++ = dw100_map_format_coordinates(qx, qy);
> > + }
> > + }
> > +
> > +out:
> > + dev_dbg(&ctx->dw_dev->pdev->dev,
> > + "%ux%u %s mapping created (d:%pad-c:%p) for stream %ux%u->%ux%u\n",
> > + mw, mh, is_user_map ? "user" : "identity",
> > + &ctx->map_dma, ctx->map, sw, sh, dw, dh);
> > +
> > + return 0;
> > +}
> > +
> > +static void dw100_destroy_mapping(struct dw100_ctx *ctx)
> > +{
> > + if (ctx->map) {
> > + dma_free_coherent(&ctx->dw_dev->pdev->dev, ctx->map_size,
> > + ctx->map, ctx->map_dma);
> > + ctx->map = NULL;
> > + }
> > +}
> > +
> > +static int dw100_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct dw100_ctx *ctx =
> > + container_of(ctrl->handler, struct dw100_ctx, hdl);
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP:
> > + ctx->user_map_is_valid = true;
>
> Ah, no. You don't want to do this.
>
> The control should always be valid.
This is meant to indicate if the control value has been set after a
S_FMT call. If the resolution changes, the control value isn't valid
anymore.
We could change the control value from within the driver in the S_FMT
handler, but frankly that's completely overkill. I'd rather ditch
control support and use a custom ioctl then if the control framework
and/or the API requirements are not well suited for this purpose.
> See the next comment...
>
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops dw100_ctrl_ops = {
> > + .s_ctrl = dw100_s_ctrl,
> > +};
> > +
> > +static const struct v4l2_ctrl_config controls[] = {
> > + [DW100_CTRL_DEWARPING_MAP] = {
> > + .ops = &dw100_ctrl_ops,
>
> What you want to do here is set .type_ops as well and override the init
> function.
Not a blocker for this, but I think the init function of type_ops is
really ineffecient for large arrays. Something better is needed.
> This init function should be used to fill in the initial values for the
> array, which would be just the x/y coordinates of the vertices, i.e. no
> warping.
>
> This will ensure that the contents of the array is always valid.
>
> > + .id = V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP,
> > + .name = "Look-Up Table",
>
> That's a poor name, I think. How about "Dewarping Vertex Map" or something
> along those lines? That at least explains what it does.
>
> > + .type = V4L2_CTRL_TYPE_U32,
> > + .min = 0x00000000,
> > + .max = 0xffffffff,
> > + .step = 1,
> > + .def = 0,
> > + .dims = { DW100_MAX_LUT_W, DW100_MAX_LUT_H },
> > + },
> > +};
> > +
> > +static int dw100_queue_setup(struct vb2_queue *vq,
> > + unsigned int *nbuffers, unsigned int *nplanes,
> > + unsigned int sizes[], struct device *alloc_devs[])
> > +{
> > + struct dw100_ctx *ctx = vb2_get_drv_priv(vq);
> > + const struct v4l2_pix_format_mplane *format;
> > + unsigned int i;
> > +
> > + format = &dw100_get_q_data(ctx, vq->type)->pix_fmt;
> > +
> > + if (*nplanes) {
> > + if (*nplanes != format->num_planes)
> > + return -EINVAL;
> > +
> > + for (i = 0; i < *nplanes; ++i) {
> > + if (sizes[i] < format->plane_fmt[i].sizeimage)
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > + }
> > +
> > + *nplanes = format->num_planes;
> > +
> > + for (i = 0; i < format->num_planes; ++i)
> > + sizes[i] = format->plane_fmt[i].sizeimage;
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_buf_prepare(struct vb2_buffer *vb)
> > +{
> > + unsigned int i;
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct dw100_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > + struct dw100_device *dw_dev = ctx->dw_dev;
> > + const struct v4l2_pix_format_mplane *pix_fmt =
> > + &dw100_get_q_data(ctx, vb->vb2_queue->type)->pix_fmt;
> > +
> > + if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
> > + if (vbuf->field != V4L2_FIELD_NONE) {
> > + dev_dbg(&dw_dev->pdev->dev, "%x field isn't supported\n",
> > + vbuf->field);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + for (i = 0; i < pix_fmt->num_planes; i++) {
> > + unsigned long size = pix_fmt->plane_fmt[i].sizeimage;
> > +
> > + if (vb2_plane_size(vb, i) < size) {
> > + dev_dbg(&dw_dev->pdev->dev,
> > + "User buffer too small (%lu < %lu)\n",
> > + vb2_plane_size(vb, i), size);
> > + return -EINVAL;
> > + }
> > +
> > + vb2_set_plane_payload(vb, i, size);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void dw100_buf_queue(struct vb2_buffer *vb)
> > +{
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct dw100_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > +
> > + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
> > +}
> > +
> > +static int dw100_start_streaming(struct vb2_queue *q, unsigned int count)
> > +{
> > + struct dw100_ctx *ctx = vb2_get_drv_priv(q);
> > + struct dw100_q_data *q_data = dw100_get_q_data(ctx, q->type);
> > + int ret;
> > +
> > + q_data->sequence = 0;
> > +
> > + ret = dw100_create_mapping(ctx);
> > + if (ret)
> > + return ret;
> > +
> > + return pm_runtime_resume_and_get(&ctx->dw_dev->pdev->dev);
>
> That's not right. If start_streaming returns an error, then all queued
> buffers must be returns to state VB2_BUF_STATE_QUEUED. Very similar to
> what stop_streaming does, except with a different vb2 state.
>
> > +}
> > +
> > +static void dw100_stop_streaming(struct vb2_queue *q)
> > +{
> > + struct dw100_ctx *ctx = vb2_get_drv_priv(q);
> > + struct vb2_v4l2_buffer *vbuf;
> > +
> > + for (;;) {
> > + if (V4L2_TYPE_IS_OUTPUT(q->type))
> > + vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > + else
> > + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > + if (!vbuf)
> > + break;
> > + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> > + }
> > +
> > + pm_runtime_put_sync(&ctx->dw_dev->pdev->dev);
> > +
> > + dw100_destroy_mapping(ctx);
> > +}
> > +
> > +static const struct vb2_ops dw100_qops = {
> > + .queue_setup = dw100_queue_setup,
> > + .buf_prepare = dw100_buf_prepare,
> > + .buf_queue = dw100_buf_queue,
> > + .start_streaming = dw100_start_streaming,
> > + .stop_streaming = dw100_stop_streaming,
> > + .wait_prepare = vb2_ops_wait_prepare,
> > + .wait_finish = vb2_ops_wait_finish,
> > +};
> > +
> > +static int dw100_m2m_queue_init(void *priv, struct vb2_queue *src_vq,
> > + struct vb2_queue *dst_vq)
> > +{
> > + struct dw100_ctx *ctx = priv;
> > + int ret;
> > +
> > + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> > + src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> > + src_vq->drv_priv = ctx;
> > + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> > + src_vq->ops = &dw100_qops;
> > + src_vq->mem_ops = &vb2_dma_contig_memops;
> > + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> > + src_vq->lock = &ctx->vq_mutex;
> > + src_vq->dev = ctx->dw_dev->v4l2_dev.dev;
> > +
> > + ret = vb2_queue_init(src_vq);
> > + if (ret)
> > + return ret;
> > +
> > + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> > + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> > + dst_vq->drv_priv = ctx;
> > + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> > + dst_vq->ops = &dw100_qops;
> > + dst_vq->mem_ops = &vb2_dma_contig_memops;
> > + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> > + dst_vq->lock = &ctx->vq_mutex;
> > + dst_vq->dev = ctx->dw_dev->v4l2_dev.dev;
> > +
> > + return vb2_queue_init(dst_vq);
> > +}
> > +
> > +static int dw100_open(struct file *file)
> > +{
> > + struct dw100_device *dw_dev = video_drvdata(file);
> > + struct dw100_ctx *ctx;
> > + struct v4l2_ctrl_handler *hdl;
> > + struct v4l2_pix_format_mplane *pix_fmt;
> > + int ret, i;
> > +
> > + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> > + if (!ctx)
> > + return -ENOMEM;
> > +
> > + mutex_init(&ctx->vq_mutex);
> > + v4l2_fh_init(&ctx->fh, video_devdata(file));
> > + file->private_data = &ctx->fh;
> > + ctx->dw_dev = dw_dev;
> > +
> > + hdl = &ctx->hdl;
> > + v4l2_ctrl_handler_init(hdl, ARRAY_SIZE(controls));
> > + for (i = 0; i < ARRAY_SIZE(controls); i++) {
> > + ctx->ctrls[i] = v4l2_ctrl_new_custom(hdl, &controls[i], NULL);
> > + if (hdl->error) {
> > + dev_err(&ctx->dw_dev->pdev->dev,
> > + "Adding control (%d) failed\n", i);
> > + ret = hdl->error;
> > + goto err;
> > + }
> > + }
> > + ctx->fh.ctrl_handler = hdl;
> > + ctx->user_map_is_valid = false;
> > +
> > + ctx->q_data[DW100_QUEUE_SRC].fmt = &formats[0];
> > +
> > + pix_fmt = &ctx->q_data[DW100_QUEUE_SRC].pix_fmt;
> > + pix_fmt->field = V4L2_FIELD_NONE;
> > + pix_fmt->colorspace = V4L2_COLORSPACE_REC709;
> > + pix_fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix_fmt->colorspace);
> > + pix_fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix_fmt->colorspace);
> > + pix_fmt->quantization =
> > + V4L2_MAP_QUANTIZATION_DEFAULT(false, pix_fmt->colorspace,
> > + pix_fmt->ycbcr_enc);
> > +
> > + v4l2_fill_pixfmt_mp(pix_fmt, formats[0].fourcc, 640, 480);
> > +
> > + ctx->q_data[DW100_QUEUE_SRC].crop.top = 0;
> > + ctx->q_data[DW100_QUEUE_SRC].crop.left = 0;
> > + ctx->q_data[DW100_QUEUE_SRC].crop.width = 640;
> > + ctx->q_data[DW100_QUEUE_SRC].crop.height = 480;
> > +
> > + ctx->q_data[DW100_QUEUE_DST] = ctx->q_data[DW100_QUEUE_SRC];
> > +
> > + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dw_dev->m2m_dev,
> > + ctx, &dw100_m2m_queue_init);
> > +
> > + if (IS_ERR(ctx->fh.m2m_ctx)) {
> > + ret = PTR_ERR(ctx->fh.m2m_ctx);
> > + goto err;
> > + }
> > +
> > + v4l2_fh_add(&ctx->fh);
> > +
> > + return 0;
> > +
> > +err:
> > + v4l2_ctrl_handler_free(hdl);
> > + v4l2_fh_exit(&ctx->fh);
> > + mutex_destroy(&ctx->vq_mutex);
> > + kfree(ctx);
> > +
> > + return ret;
> > +}
> > +
> > +static int dw100_release(struct file *file)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > +
> > + v4l2_fh_del(&ctx->fh);
> > + v4l2_fh_exit(&ctx->fh);
> > + v4l2_ctrl_handler_free(&ctx->hdl);
> > + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> > + mutex_destroy(&ctx->vq_mutex);
> > + kfree(ctx);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_file_operations dw100_fops = {
> > + .owner = THIS_MODULE,
> > + .open = dw100_open,
> > + .release = dw100_release,
> > + .poll = v4l2_m2m_fop_poll,
> > + .unlocked_ioctl = video_ioctl2,
> > + .mmap = v4l2_m2m_fop_mmap,
> > +};
> > +
> > +static int dw100_querycap(struct file *file, void *priv,
> > + struct v4l2_capability *cap)
> > +{
> > + strscpy(cap->driver, DRV_NAME, sizeof(cap->driver));
> > + strscpy(cap->card, "DW100 dewarper", sizeof(cap->card));
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_enum_fmt_vid(struct file *file, void *priv,
> > + struct v4l2_fmtdesc *f)
> > +{
> > + int i, num = 0;
> > +
> > + for (i = 0; i < ARRAY_SIZE(formats); i++) {
> > + if (formats[i].types & to_dw100_fmt_type(f->type)) {
> > + if (num == f->index) {
> > + f->pixelformat = formats[i].fourcc;
> > + return 0;
> > + }
> > + ++num;
> > + }
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int dw100_enum_framesizes(struct file *file, void *priv,
> > + struct v4l2_frmsizeenum *fsize)
> > +{
> > + const struct dw100_fmt *fmt;
> > +
> > + if (fsize->index)
> > + return -EINVAL;
> > +
> > + fmt = dw100_find_pixel_format(fsize->pixel_format,
> > + DW100_FMT_OUTPUT | DW100_FMT_CAPTURE);
> > + if (!fmt)
> > + return -EINVAL;
> > +
> > + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
> > + fsize->stepwise = dw100_frmsize_stepwise;
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_g_fmt_vid(struct file *file, void *priv, struct v4l2_format *f)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + struct vb2_queue *vq;
> > + struct dw100_q_data *q_data;
> > +
> > + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > + if (!vq)
> > + return -EINVAL;
> > +
> > + q_data = dw100_get_q_data(ctx, f->type);
> > +
> > + f->fmt.pix_mp = q_data->pix_fmt;
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_try_fmt(struct file *file, struct v4l2_format *f)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
> > + const struct dw100_fmt *fmt;
> > +
> > + fmt = dw100_find_format(f);
> > + if (!fmt) {
> > + fmt = &formats[0];
> > + pix->pixelformat = fmt->fourcc;
> > + }
> > +
> > + v4l2_apply_frmsize_constraints(&pix->width, &pix->height,
> > + &dw100_frmsize_stepwise);
> > +
> > + v4l2_fill_pixfmt_mp(pix, fmt->fourcc, pix->width, pix->height);
> > +
> > + pix->field = V4L2_FIELD_NONE;
> > +
> > + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> > + if (pix->colorspace == V4L2_COLORSPACE_DEFAULT)
> > + pix->colorspace = V4L2_COLORSPACE_REC709;
> > + if (pix->xfer_func == V4L2_XFER_FUNC_DEFAULT)
> > + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> > + if (pix->ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
> > + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> > + if (pix->quantization == V4L2_QUANTIZATION_DEFAULT)
> > + pix->quantization =
> > + V4L2_MAP_QUANTIZATION_DEFAULT(false,
> > + pix->colorspace,
> > + pix->ycbcr_enc);
> > + } else {
> > + /*
> > + * The DW100 can't perform colorspace conversion, the colorspace
> > + * on the capture queue must be identical to the output queue.
> > + */
> > + const struct dw100_q_data *q_data =
> > + dw100_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> > +
> > + pix->colorspace = q_data->pix_fmt.colorspace;
> > + pix->xfer_func = q_data->pix_fmt.xfer_func;
> > + pix->ycbcr_enc = q_data->pix_fmt.ycbcr_enc;
> > + pix->quantization = q_data->pix_fmt.quantization;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_s_fmt(struct dw100_ctx *ctx, struct v4l2_format *f)
> > +{
> > + struct dw100_q_data *q_data;
> > + struct vb2_queue *vq;
> > +
> > + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > + if (!vq)
> > + return -EINVAL;
> > +
> > + q_data = dw100_get_q_data(ctx, f->type);
> > + if (!q_data)
> > + return -EINVAL;
> > +
> > + if (vb2_is_busy(vq)) {
> > + dev_dbg(&ctx->dw_dev->pdev->dev, "%s queue busy\n", __func__);
> > + return -EBUSY;
> > + }
> > +
> > + q_data->fmt = dw100_find_format(f);
> > + q_data->pix_fmt = f->fmt.pix_mp;
> > + q_data->crop.top = 0;
> > + q_data->crop.left = 0;
> > + q_data->crop.width = f->fmt.pix_mp.width;
> > + q_data->crop.height = f->fmt.pix_mp.height;
> > +
> > + /* Propagate buffers encoding */
> > +
> > + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> > + struct dw100_q_data *dst_q_data =
> > + dw100_get_q_data(ctx,
> > + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > +
> > + dst_q_data->pix_fmt.colorspace = q_data->pix_fmt.colorspace;
> > + dst_q_data->pix_fmt.ycbcr_enc = q_data->pix_fmt.ycbcr_enc;
> > + dst_q_data->pix_fmt.quantization = q_data->pix_fmt.quantization;
> > + dst_q_data->pix_fmt.xfer_func = q_data->pix_fmt.xfer_func;
> > + }
> > +
> > + dev_dbg(&ctx->dw_dev->pdev->dev,
> > + "Setting format for type %u, wxh: %ux%u, fmt: %p4cc\n",
> > + f->type, q_data->pix_fmt.width, q_data->pix_fmt.height,
> > + &q_data->pix_fmt.pixelformat);
> > +
> > + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> > + int ret;
> > + u32 dims[V4L2_CTRL_MAX_DIMS] = {};
> > + struct v4l2_ctrl *ctrl = ctx->ctrls[DW100_CTRL_DEWARPING_MAP];
> > +
> > + dims[0] = dw100_get_n_vertices_from_length(q_data->pix_fmt.width);
> > + dims[1] = dw100_get_n_vertices_from_length(q_data->pix_fmt.height);
> > +
> > + v4l2_ctrl_lock(ctrl);
> > + ctx->user_map_is_valid = false;
> > + ret = __v4l2_ctrl_modify_dimensions(ctrl, dims);
> > + v4l2_ctrl_unlock(ctrl);
> > +
> > + if (ret) {
> > + dev_err(&ctx->dw_dev->pdev->dev,
> > + "Modifying LUT dimensions failed with error %d\n",
> > + ret);
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_try_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
> > + return -EINVAL;
> > +
> > + return dw100_try_fmt(file, f);
> > +}
> > +
> > +static int dw100_s_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + int ret;
> > +
> > + ret = dw100_try_fmt_vid_cap(file, priv, f);
> > + if (ret)
> > + return ret;
> > +
> > + ret = dw100_s_fmt(ctx, f);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_try_fmt_vid_out(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > + return -EINVAL;
> > +
> > + return dw100_try_fmt(file, f);
> > +}
> > +
> > +static int dw100_s_fmt_vid_out(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + int ret;
> > +
> > + ret = dw100_try_fmt_vid_out(file, priv, f);
> > + if (ret)
> > + return ret;
> > +
> > + ret = dw100_s_fmt(ctx, f);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_g_selection(struct file *file, void *fh,
> > + struct v4l2_selection *sel)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + struct dw100_q_data *src_q_data;
> > +
> > + if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> > + return -EINVAL;
> > +
> > + src_q_data = dw100_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> > +
> > + switch (sel->target) {
> > + case V4L2_SEL_TGT_CROP_DEFAULT:
> > + case V4L2_SEL_TGT_CROP_BOUNDS:
> > + sel->r.top = 0;
> > + sel->r.left = 0;
> > + sel->r.width = src_q_data->pix_fmt.width;
> > + sel->r.height = src_q_data->pix_fmt.height;
> > + break;
> > + case V4L2_SEL_TGT_CROP:
> > + sel->r.top = src_q_data->crop.top;
> > + sel->r.left = src_q_data->crop.left;
> > + sel->r.width = src_q_data->crop.width;
> > + sel->r.height = src_q_data->crop.height;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dw100_s_selection(struct file *file, void *fh,
> > + struct v4l2_selection *sel)
> > +{
> > + struct dw100_ctx *ctx = dw100_file2ctx(file);
> > + struct dw100_q_data *src_q_data;
> > + u32 qscalex, qscaley, qscale;
> > + int x, y, w, h;
> > + unsigned int wframe, hframe;
> > +
> > + if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> > + return -EINVAL;
> > +
> > + src_q_data = dw100_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> > +
> > + dev_dbg(&ctx->dw_dev->pdev->dev,
> > + ">>> Buffer Type: %u Target: %u Rect: %ux%u@%d.%d\n",
> > + sel->type, sel->target,
> > + sel->r.width, sel->r.height, sel->r.left, sel->r.top);
> > +
> > + switch (sel->target) {
> > + case V4L2_SEL_TGT_CROP:
> > + wframe = src_q_data->pix_fmt.width;
> > + hframe = src_q_data->pix_fmt.height;
> > +
> > + sel->r.top = clamp_t(int, sel->r.top, 0, hframe - DW100_MIN_H);
> > + sel->r.left = clamp_t(int, sel->r.left, 0, wframe - DW100_MIN_W);
> > + sel->r.height =
> > + clamp(sel->r.height, DW100_MIN_H, hframe - sel->r.top);
> > + sel->r.width =
> > + clamp(sel->r.width, DW100_MIN_W, wframe - sel->r.left);
> > +
> > + /* UQ16.16 for float operations */
> > + qscalex = (sel->r.width << 16) / wframe;
> > + qscaley = (sel->r.height << 16) / hframe;
> > + y = sel->r.top;
> > + x = sel->r.left;
> > + if (qscalex == qscaley) {
> > + qscale = qscalex;
> > + } else {
> > + switch (sel->flags) {
> > + case 0:
> > + qscale = (qscalex + qscaley) / 2;
> > + break;
> > + case V4L2_SEL_FLAG_GE:
> > + qscale = max(qscaley, qscalex);
> > + break;
> > + case V4L2_SEL_FLAG_LE:
> > + qscale = min(qscaley, qscalex);
> > + break;
> > + case V4L2_SEL_FLAG_LE | V4L2_SEL_FLAG_GE:
> > + return -ERANGE;
> > + default:
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + w = (u32)((((u64)wframe << 16) * qscale) >> 32);
> > + h = (u32)((((u64)hframe << 16) * qscale) >> 32);
> > + x = x + (sel->r.width - w) / 2;
> > + y = y + (sel->r.height - h) / 2;
> > + x = min(wframe - w, (unsigned int)max(0, x));
> > + y = min(hframe - h, (unsigned int)max(0, y));
> > +
> > + sel->r.top = y;
> > + sel->r.left = x;
> > + sel->r.width = w;
> > + sel->r.height = h;
> > +
> > + src_q_data->crop.top = sel->r.top;
> > + src_q_data->crop.left = sel->r.left;
> > + src_q_data->crop.width = sel->r.width;
> > + src_q_data->crop.height = sel->r.height;
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + dev_dbg(&ctx->dw_dev->pdev->dev,
> > + "<<< Buffer Type: %u Target: %u Rect: %ux%u@%d.%d\n",
> > + sel->type, sel->target,
> > + sel->r.width, sel->r.height, sel->r.left, sel->r.top);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_ioctl_ops dw100_ioctl_ops = {
> > + .vidioc_querycap = dw100_querycap,
> > +
> > + .vidioc_enum_fmt_vid_cap = dw100_enum_fmt_vid,
> > + .vidioc_enum_framesizes = dw100_enum_framesizes,
> > + .vidioc_g_fmt_vid_cap_mplane = dw100_g_fmt_vid,
> > + .vidioc_try_fmt_vid_cap_mplane = dw100_try_fmt_vid_cap,
> > + .vidioc_s_fmt_vid_cap_mplane = dw100_s_fmt_vid_cap,
> > +
> > + .vidioc_enum_fmt_vid_out = dw100_enum_fmt_vid,
> > + .vidioc_g_fmt_vid_out_mplane = dw100_g_fmt_vid,
> > + .vidioc_try_fmt_vid_out_mplane = dw100_try_fmt_vid_out,
> > + .vidioc_s_fmt_vid_out_mplane = dw100_s_fmt_vid_out,
> > +
> > + .vidioc_g_selection = dw100_g_selection,
> > + .vidioc_s_selection = dw100_s_selection,
> > + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
> > + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
> > + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
> > + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
> > + .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
> > + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
> > + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
> > +
> > + .vidioc_streamon = v4l2_m2m_ioctl_streamon,
> > + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
> > +
> > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> > +};
> > +
> > +static void dw100_job_finish(struct dw100_device *dw_dev, bool with_error)
> > +{
> > + struct dw100_ctx *curr_ctx;
> > + struct vb2_v4l2_buffer *src_vb, *dst_vb;
> > + enum vb2_buffer_state buf_state;
> > +
> > + curr_ctx = v4l2_m2m_get_curr_priv(dw_dev->m2m_dev);
> > +
> > + if (!curr_ctx) {
> > + dev_err(&dw_dev->pdev->dev,
> > + "Instance released before the end of transaction\n");
> > + return;
> > + }
> > +
> > + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->fh.m2m_ctx);
> > + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->fh.m2m_ctx);
> > +
> > + if (likely(!with_error))
> > + buf_state = VB2_BUF_STATE_DONE;
> > + else
> > + buf_state = VB2_BUF_STATE_ERROR;
> > +
> > + v4l2_m2m_buf_done(src_vb, buf_state);
> > + v4l2_m2m_buf_done(dst_vb, buf_state);
> > +
> > + dev_dbg(&dw_dev->pdev->dev, "Finishing transaction with%s error(s)\n",
> > + with_error ? "" : "out");
> > +
> > + v4l2_m2m_job_finish(dw_dev->m2m_dev, curr_ctx->fh.m2m_ctx);
> > +}
> > +
> > +static void dw100_hw_reset(struct dw100_device *dw_dev)
> > +{
> > + u32 val;
> > +
> > + val = dw100_read(dw_dev, DW100_DEWARP_CTRL);
> > + val |= DW100_DEWARP_CTRL_ENABLE;
> > + val |= DW100_DEWARP_CTRL_SOFT_RESET;
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > + val &= ~DW100_DEWARP_CTRL_SOFT_RESET;
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > +}
> > +
> > +static void _dw100_hw_set_master_bus_enable(struct dw100_device *dw_dev,
> > + unsigned int enable)
> > +{
> > + u32 val;
> > +
> > + dev_dbg(&dw_dev->pdev->dev, "%sable master bus\n",
> > + enable ? "En" : "Dis");
> > +
> > + val = dw100_read(dw_dev, DW100_BUS_CTRL);
> > +
> > + if (enable)
> > + val |= DW100_BUS_CTRL_AXI_MASTER_ENABLE;
> > + else
> > + val &= ~DW100_BUS_CTRL_AXI_MASTER_ENABLE;
> > +
> > + dw100_write(dw_dev, DW100_BUS_CTRL, val);
> > +}
> > +
> > +static void dw100_hw_master_bus_enable(struct dw100_device *dw_dev)
> > +{
> > + _dw100_hw_set_master_bus_enable(dw_dev, 1);
> > +}
> > +
> > +static void dw100_hw_master_bus_disable(struct dw100_device *dw_dev)
> > +{
> > + _dw100_hw_set_master_bus_enable(dw_dev, 0);
> > +}
> > +
> > +static void dw100_hw_dewarp_start(struct dw100_device *dw_dev)
> > +{
> > + u32 val;
> > +
> > + val = dw100_read(dw_dev, DW100_DEWARP_CTRL);
> > +
> > + dev_dbg(&dw_dev->pdev->dev, "Starting Hardware CTRL:0x%08x\n", val);
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val | DW100_DEWARP_CTRL_START);
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > +}
> > +
> > +static void dw100_hw_init_ctrl(struct dw100_device *dw_dev)
> > +{
> > + u32 val;
> > + /*
> > + * Input format YUV422_SP
> > + * Output format YUV422_SP
> > + * No hardware handshake (SW)
> > + * No automatic double src buffering (Single)
> > + * No automatic double dst buffering (Single)
> > + * No Black Line
> > + * Prefetch image pixel traversal
> > + */
> > +
> > + val = DW100_DEWARP_CTRL_ENABLE
> > + /* Valid only for auto prefetch mode*/
> > + | DW100_DEWARP_CTRL_PREFETCH_THRESHOLD(32);
> > +
> > + /*
> > + * Calculation mode required to support any scaling factor,
> > + * but x4 slower than traversal mode.
> > + *
> > + * DW100_DEWARP_CTRL_PREFETCH_MODE_TRAVERSAL
> > + * DW100_DEWARP_CTRL_PREFETCH_MODE_CALCULATION
> > + * DW100_DEWARP_CTRL_PREFETCH_MODE_AUTO
> > + *
> > + * TODO: Find heuristics requiring calculation mode
> > + */
> > + val |= DW100_DEWARP_CTRL_PREFETCH_MODE_CALCULATION;
> > +
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > +}
> > +
> > +static void dw100_hw_set_pixel_boundary(struct dw100_device *dw_dev)
> > +{
> > + u32 val;
> > +
> > + val = DW100_BOUNDARY_PIXEL_V(128)
> > + | DW100_BOUNDARY_PIXEL_U(128)
> > + | DW100_BOUNDARY_PIXEL_Y(0);
> > +
> > + dw100_write(dw_dev, DW100_BOUNDARY_PIXEL, val);
> > +}
> > +
> > +static void dw100_hw_set_scale(struct dw100_device *dw_dev, u8 scale)
> > +{
> > + dev_dbg(&dw_dev->pdev->dev, "Setting scale factor to %u\n", scale);
> > +
> > + dw100_write(dw_dev, DW100_SCALE_FACTOR, scale);
> > +}
> > +
> > +static void dw100_hw_set_roi(struct dw100_device *dw_dev, u32 x, u32 y)
> > +{
> > + u32 val;
> > +
> > + dev_dbg(&dw_dev->pdev->dev, "Setting ROI region to %u.%u\n", x, y);
> > +
> > + val = DW100_ROI_START_X(x) | DW100_ROI_START_Y(y);
> > +
> > + dw100_write(dw_dev, DW100_ROI_START, val);
> > +}
> > +
> > +static void dw100_hw_set_src_crop(struct dw100_device *dw_dev,
> > + const struct dw100_q_data *src_q_data,
> > + const struct dw100_q_data *dst_q_data)
> > +{
> > + const struct v4l2_rect *rect = &src_q_data->crop;
> > + u32 src_scale, qscale, left_scale, top_scale;
> > +
> > + /* HW Scale is UQ1.7 encoded */
> > + src_scale = (rect->width << 7) / src_q_data->pix_fmt.width;
> > + dw100_hw_set_scale(dw_dev, src_scale);
> > +
> > + qscale = (dst_q_data->pix_fmt.width << 7) / src_q_data->pix_fmt.width;
> > +
> > + left_scale = ((rect->left << 7) * qscale) >> 14;
> > + top_scale = ((rect->top << 7) * qscale) >> 14;
> > +
> > + dw100_hw_set_roi(dw_dev, left_scale, top_scale);
> > +}
> > +
> > +static void dw100_hw_set_source(struct dw100_device *dw_dev,
> > + const struct dw100_q_data *q_data,
> > + struct vb2_buffer *buffer)
> > +{
> > + u32 width, height, stride, fourcc, val;
> > + const struct dw100_fmt *fmt = q_data->fmt;
> > + dma_addr_t addr_y = vb2_dma_contig_plane_dma_addr(buffer, 0);
> > + dma_addr_t addr_uv;
> > +
> > + width = q_data->pix_fmt.width;
> > + height = q_data->pix_fmt.height;
> > + stride = q_data->pix_fmt.plane_fmt[0].bytesperline;
> > + fourcc = q_data->fmt->fourcc;
> > +
> > + if (q_data->pix_fmt.num_planes == 2)
> > + addr_uv = vb2_dma_contig_plane_dma_addr(buffer, 1);
> > + else
> > + addr_uv = addr_y + (stride * height);
> > +
> > + dev_dbg(&dw_dev->pdev->dev,
> > + "Set HW source registers for %ux%u - stride %u, pixfmt: %p4cc, dma:%pad\n",
> > + width, height, stride, &fourcc, &addr_y);
> > +
> > + /* Pixel Format */
> > + val = dw100_read(dw_dev, DW100_DEWARP_CTRL);
> > +
> > + val &= ~DW100_DEWARP_CTRL_INPUT_FORMAT_MASK;
> > + val |= DW100_DEWARP_CTRL_INPUT_FORMAT(fmt->reg_format);
> > +
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > +
> > + /* Swap */
> > + val = dw100_read(dw_dev, DW100_SWAP_CONTROL);
> > +
> > + val &= ~DW100_SWAP_CONTROL_SRC_MASK;
> > + /*
> > + * Data swapping is performed only on Y plane for source image.
> > + */
> > + if (fmt->reg_swap_uv &&
> > + fmt->reg_format == DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED)
> > + val |= DW100_SWAP_CONTROL_SRC(DW100_SWAP_CONTROL_Y
> > + (DW100_SWAP_CONTROL_BYTE));
> > +
> > + dw100_write(dw_dev, DW100_SWAP_CONTROL, val);
> > +
> > + /* Image resolution */
> > + dw100_write(dw_dev, DW100_SRC_IMG_SIZE,
> > + DW100_IMG_SIZE_WIDTH(width) | DW100_IMG_SIZE_HEIGHT(height));
> > +
> > + dw100_write(dw_dev, DW100_SRC_IMG_STRIDE, stride);
> > +
> > + /* Buffers */
> > + dw100_write(dw_dev, DW100_SRC_IMG_Y_BASE, DW100_IMG_Y_BASE(addr_y));
> > + dw100_write(dw_dev, DW100_SRC_IMG_UV_BASE, DW100_IMG_UV_BASE(addr_uv));
> > +}
> > +
> > +static void dw100_hw_set_destination(struct dw100_device *dw_dev,
> > + const struct dw100_q_data *q_data,
> > + const struct dw100_fmt *ifmt,
> > + struct vb2_buffer *buffer)
> > +{
> > + u32 width, height, stride, fourcc, val, size_y, size_uv;
> > + const struct dw100_fmt *fmt = q_data->fmt;
> > + dma_addr_t addr_y, addr_uv;
> > +
> > + width = q_data->pix_fmt.width;
> > + height = q_data->pix_fmt.height;
> > + stride = q_data->pix_fmt.plane_fmt[0].bytesperline;
> > + fourcc = fmt->fourcc;
> > +
> > + addr_y = vb2_dma_contig_plane_dma_addr(buffer, 0);
> > + size_y = q_data->pix_fmt.plane_fmt[0].sizeimage;
> > +
> > + if (q_data->pix_fmt.num_planes == 2) {
> > + addr_uv = vb2_dma_contig_plane_dma_addr(buffer, 1);
> > + size_uv = q_data->pix_fmt.plane_fmt[1].sizeimage;
> > + } else {
> > + addr_uv = addr_y + ALIGN(stride * height, 16);
> > + size_uv = size_y;
> > + if (fmt->reg_format == DW100_DEWARP_CTRL_FORMAT_YUV420_SP)
> > + size_uv /= 2;
> > + }
> > +
> > + dev_dbg(&dw_dev->pdev->dev,
> > + "Set HW source registers for %ux%u - stride %u, pixfmt: %p4cc, dma:%pad\n",
> > + width, height, stride, &fourcc, &addr_y);
> > +
> > + /* Pixel Format */
> > + val = dw100_read(dw_dev, DW100_DEWARP_CTRL);
> > +
> > + val &= ~DW100_DEWARP_CTRL_OUTPUT_FORMAT_MASK;
> > + val |= DW100_DEWARP_CTRL_OUTPUT_FORMAT(fmt->reg_format);
> > +
> > + dw100_write(dw_dev, DW100_DEWARP_CTRL, val);
> > +
> > + /* Swap */
> > + val = dw100_read(dw_dev, DW100_SWAP_CONTROL);
> > +
> > + val &= ~DW100_SWAP_CONTROL_DST_MASK;
> > +
> > + /*
> > + * Avoid to swap twice
> > + */
> > + if (fmt->reg_swap_uv ^
> > + (ifmt->reg_swap_uv && ifmt->reg_format !=
> > + DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED)) {
> > + if (fmt->reg_format == DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED)
> > + val |= DW100_SWAP_CONTROL_DST(DW100_SWAP_CONTROL_Y
> > + (DW100_SWAP_CONTROL_BYTE));
> > + else
> > + val |= DW100_SWAP_CONTROL_DST(DW100_SWAP_CONTROL_UV
> > + (DW100_SWAP_CONTROL_BYTE));
> > + }
> > +
> > + dw100_write(dw_dev, DW100_SWAP_CONTROL, val);
> > +
> > + /* Image resolution */
> > + dw100_write(dw_dev, DW100_DST_IMG_SIZE,
> > + DW100_IMG_SIZE_WIDTH(width) | DW100_IMG_SIZE_HEIGHT(height));
> > + dw100_write(dw_dev, DW100_DST_IMG_STRIDE, stride);
> > + dw100_write(dw_dev, DW100_DST_IMG_Y_BASE, DW100_IMG_Y_BASE(addr_y));
> > + dw100_write(dw_dev, DW100_DST_IMG_UV_BASE, DW100_IMG_UV_BASE(addr_uv));
> > + dw100_write(dw_dev, DW100_DST_IMG_Y_SIZE1, DW100_DST_IMG_Y_SIZE(size_y));
> > + dw100_write(dw_dev, DW100_DST_IMG_UV_SIZE1,
> > + DW100_DST_IMG_UV_SIZE(size_uv));
> > +}
> > +
> > +static void dw100_hw_set_mapping(struct dw100_device *dw_dev, dma_addr_t addr,
> > + u32 width, u32 height)
> > +{
> > + dev_dbg(&dw_dev->pdev->dev,
> > + "Set HW mapping registers for %ux%u addr:%pad",
> > + width, height, &addr);
> > +
> > + dw100_write(dw_dev, DW100_MAP_LUT_ADDR, DW100_MAP_LUT_ADDR_ADDR(addr));
> > + dw100_write(dw_dev, DW100_MAP_LUT_SIZE, DW100_MAP_LUT_SIZE_WIDTH(width)
> > + | DW100_MAP_LUT_SIZE_HEIGHT(height));
> > +}
> > +
> > +static void dw100_hw_clear_irq(struct dw100_device *dw_dev, unsigned int irq)
> > +{
> > + dw100_write(dw_dev, DW100_INTERRUPT_STATUS,
> > + DW100_INTERRUPT_STATUS_INT_CLEAR(irq));
> > +}
> > +
> > +static void dw100_hw_enable_irq(struct dw100_device *dw_dev)
> > +{
> > + dw100_write(dw_dev, DW100_INTERRUPT_STATUS,
> > + DW100_INTERRUPT_STATUS_INT_ENABLE_MASK);
> > +}
> > +
> > +static void dw100_hw_disable_irq(struct dw100_device *dw_dev)
> > +{
> > + dw100_write(dw_dev, DW100_INTERRUPT_STATUS, 0);
> > +}
> > +
> > +static u32 dw_hw_get_pending_irqs(struct dw100_device *dw_dev)
> > +{
> > + u32 val;
> > +
> > + val = dw100_read(dw_dev, DW100_INTERRUPT_STATUS);
> > +
> > + return DW100_INTERRUPT_STATUS_INT_STATUS(val);
> > +}
> > +
> > +static irqreturn_t dw100_irq_handler(int irq, void *dev_id)
> > +{
> > + struct dw100_device *dw_dev = dev_id;
> > + u32 pending_irqs, err_irqs, frame_done_irq;
> > + bool with_error = true;
> > +
> > + pending_irqs = dw_hw_get_pending_irqs(dw_dev);
> > + frame_done_irq = pending_irqs & DW100_INTERRUPT_STATUS_INT_FRAME_DONE;
> > + err_irqs = DW100_INTERRUPT_STATUS_INT_ERR_STATUS(pending_irqs);
> > +
> > + if (frame_done_irq) {
> > + dev_dbg(&dw_dev->pdev->dev, "Frame done interrupt\n");
> > + with_error = false;
> > + err_irqs &= ~DW100_INTERRUPT_STATUS_INT_ERR_STATUS
> > + (DW100_INTERRUPT_STATUS_INT_ERR_FRAME_DONE);
> > + }
> > +
> > + if (err_irqs)
> > + dev_err(&dw_dev->pdev->dev, "Interrupt error: %#x\n", err_irqs);
> > +
> > + dw100_hw_disable_irq(dw_dev);
> > + dw100_hw_master_bus_disable(dw_dev);
> > + dw100_hw_clear_irq(dw_dev, pending_irqs |
> > + DW100_INTERRUPT_STATUS_INT_ERR_TIME_OUT);
> > +
> > + dw100_job_finish(dw_dev, with_error);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void dw100_start(struct dw100_ctx *ctx, struct vb2_v4l2_buffer *in_vb,
> > + struct vb2_v4l2_buffer *out_vb)
> > +{
> > + struct dw100_device *dw_dev = ctx->dw_dev;
> > +
> > + out_vb->sequence =
> > + dw100_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)->sequence++;
> > + in_vb->sequence =
> > + dw100_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)->sequence++;
> > +
> > + dev_dbg(&ctx->dw_dev->pdev->dev,
> > + "Starting queues %p->%p, sequence %u->%u\n",
> > + v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
> > + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE),
> > + v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
> > + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE),
> > + in_vb->sequence, out_vb->sequence);
> > +
> > + v4l2_m2m_buf_copy_metadata(in_vb, out_vb, true);
> > +
> > + /* Now, let's deal with hardware ... */
> > + dw100_hw_master_bus_disable(dw_dev);
> > + dw100_hw_init_ctrl(dw_dev);
> > + dw100_hw_set_pixel_boundary(dw_dev);
> > + dw100_hw_set_src_crop(dw_dev, &ctx->q_data[DW100_QUEUE_SRC],
> > + &ctx->q_data[DW100_QUEUE_DST]);
> > + dw100_hw_set_source(dw_dev, &ctx->q_data[DW100_QUEUE_SRC],
> > + &in_vb->vb2_buf);
> > + dw100_hw_set_destination(dw_dev, &ctx->q_data[DW100_QUEUE_DST],
> > + ctx->q_data[DW100_QUEUE_SRC].fmt,
> > + &out_vb->vb2_buf);
> > + dw100_hw_set_mapping(dw_dev, ctx->map_dma,
> > + ctx->map_width, ctx->map_height);
> > + dw100_hw_enable_irq(dw_dev);
> > + dw100_hw_dewarp_start(dw_dev);
> > +
> > + /* Enable Bus */
> > + dw100_hw_master_bus_enable(dw_dev);
> > +}
> > +
> > +static void dw100_device_run(void *priv)
> > +{
> > + struct dw100_ctx *ctx = priv;
> > + struct vb2_v4l2_buffer *src_buf, *dst_buf;
> > +
> > + src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > + dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> > +
> > + dw100_start(ctx, src_buf, dst_buf);
> > +}
> > +
> > +static const struct v4l2_m2m_ops dw100_m2m_ops = {
> > + .device_run = dw100_device_run,
> > +};
> > +
> > +static struct video_device *dw100_init_video_device(struct dw100_device *dw_dev)
> > +{
> > + struct video_device *vfd = &dw_dev->vfd;
> > +
> > + vfd->vfl_dir = VFL_DIR_M2M;
> > + vfd->fops = &dw100_fops;
> > + vfd->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
> > + vfd->ioctl_ops = &dw100_ioctl_ops;
> > + vfd->minor = -1;
> > + vfd->release = video_device_release_empty;
> > + vfd->v4l2_dev = &dw_dev->v4l2_dev;
> > + vfd->lock = &dw_dev->vfd_mutex;
> > +
> > + strscpy(vfd->name, DRV_NAME, sizeof(vfd->name));
> > + mutex_init(vfd->lock);
> > + video_set_drvdata(vfd, dw_dev);
> > +
> > + return vfd;
> > +}
> > +
> > +static int dw100_dump_regs_show(struct seq_file *m, void *private)
> > +{
> > + struct dw100_device *dw_dev = m->private;
> > + int ret;
> > +
> > + ret = pm_runtime_resume_and_get(&dw_dev->pdev->dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = dw100_dump_regs(m);
> > +
> > + pm_runtime_put_sync(&dw_dev->pdev->dev);
> > +
> > + return ret;
> > +}
> > +DEFINE_SHOW_ATTRIBUTE(dw100_dump_regs);
> > +
> > +static void dw100_debugfs_init(struct dw100_device *dw_dev)
> > +{
> > + dw_dev->debugfs_root =
> > + debugfs_create_dir(dev_name(&dw_dev->pdev->dev), NULL);
> > +
> > + debugfs_create_file("dump_regs", 0600, dw_dev->debugfs_root, dw_dev,
> > + &dw100_dump_regs_fops);
> > +}
> > +
> > +static void dw100_debugfs_exit(struct dw100_device *dw_dev)
> > +{
> > + debugfs_remove_recursive(dw_dev->debugfs_root);
> > +}
> > +
> > +static int dw100_probe(struct platform_device *pdev)
> > +{
> > + struct dw100_device *dw_dev;
> > + struct video_device *vfd;
> > + struct resource *res;
> > + int ret, irq;
> > +
> > + dw_dev = devm_kzalloc(&pdev->dev, sizeof(*dw_dev), GFP_KERNEL);
> > + if (!dw_dev)
> > + return -ENOMEM;
> > + dw_dev->pdev = pdev;
> > +
> > + ret = devm_clk_bulk_get_all(&pdev->dev, &dw_dev->clks);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Unable to get clocks: %d\n", ret);
> > + return ret;
> > + }
> > + dw_dev->num_clks = ret;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + dw_dev->mmio = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(dw_dev->mmio))
> > + return PTR_ERR(dw_dev->mmio);
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0)
> > + return irq;
> > +
> > + platform_set_drvdata(pdev, dw_dev);
> > +
> > + pm_runtime_enable(&pdev->dev);
> > + ret = pm_runtime_resume_and_get(&pdev->dev);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Unable to resume the device: %d\n", ret);
> > + goto err_pm;
> > + }
> > +
> > + pm_runtime_put_sync(&pdev->dev);
> > +
> > + ret = devm_request_irq(&pdev->dev, irq, dw100_irq_handler, IRQF_ONESHOT,
> > + dev_name(&pdev->dev), dw_dev);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = v4l2_device_register(&pdev->dev, &dw_dev->v4l2_dev);
> > + if (ret)
> > + goto err_pm;
> > +
> > + vfd = dw100_init_video_device(dw_dev);
> > +
> > + dw_dev->m2m_dev = v4l2_m2m_init(&dw100_m2m_ops);
> > + if (IS_ERR(dw_dev->m2m_dev)) {
> > + dev_err(&pdev->dev, "Failed to init mem2mem device\n");
> > + ret = PTR_ERR(dw_dev->m2m_dev);
> > + goto err_v4l2;
> > + }
> > +
> > + dw_dev->mdev.dev = &pdev->dev;
> > + strscpy(dw_dev->mdev.model, "dw100", sizeof(dw_dev->mdev.model));
> > + media_device_init(&dw_dev->mdev);
> > + dw_dev->v4l2_dev.mdev = &dw_dev->mdev;
> > +
> > + ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to register video device\n");
> > + goto err_m2m;
> > + }
> > +
> > + ret = v4l2_m2m_register_media_controller(dw_dev->m2m_dev, vfd,
> > + MEDIA_ENT_F_PROC_VIDEO_SCALER);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to init mem2mem media controller\n");
> > + goto error_v4l2;
> > + }
> > +
> > + ret = media_device_register(&dw_dev->mdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to register mem2mem media device\n");
> > + goto error_m2m_mc;
> > + }
> > +
> > + dw100_debugfs_init(dw_dev);
> > +
> > + dev_info(&pdev->dev,
> > + "dw100 v4l2 m2m registered as /dev/video%u\n", vfd->num);
> > +
> > + return 0;
> > +
> > +error_m2m_mc:
> > + v4l2_m2m_unregister_media_controller(dw_dev->m2m_dev);
> > +error_v4l2:
> > + video_unregister_device(vfd);
> > +err_m2m:
> > + v4l2_m2m_release(dw_dev->m2m_dev);
> > +err_v4l2:
> > + v4l2_device_unregister(&dw_dev->v4l2_dev);
> > +err_pm:
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int dw100_remove(struct platform_device *pdev)
> > +{
> > + struct dw100_device *dw_dev = platform_get_drvdata(pdev);
> > +
> > + dw100_debugfs_exit(dw_dev);
> > +
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + media_device_unregister(&dw_dev->mdev);
> > + v4l2_m2m_unregister_media_controller(dw_dev->m2m_dev);
> > + media_device_cleanup(&dw_dev->mdev);
> > +
> > + video_unregister_device(&dw_dev->vfd);
> > + mutex_destroy(dw_dev->vfd.lock);
> > + v4l2_m2m_release(dw_dev->m2m_dev);
> > + v4l2_device_unregister(&dw_dev->v4l2_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused dw100_runtime_suspend(struct device *dev)
> > +{
> > + struct dw100_device *dw_dev = dev_get_drvdata(dev);
> > +
> > + clk_bulk_disable_unprepare(dw_dev->num_clks, dw_dev->clks);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused dw100_runtime_resume(struct device *dev)
> > +{
> > + int ret;
> > + struct dw100_device *dw_dev = dev_get_drvdata(dev);
> > +
> > + ret = clk_bulk_prepare_enable(dw_dev->num_clks, dw_dev->clks);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + dw100_hw_reset(dw_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops dw100_pm = {
> > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > + pm_runtime_force_resume)
> > + SET_RUNTIME_PM_OPS(dw100_runtime_suspend,
> > + dw100_runtime_resume, NULL)
> > +};
> > +
> > +static const struct of_device_id dw100_dt_ids[] = {
> > + { .compatible = "nxp,imx8mp-dw100", .data = NULL },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, dw100_dt_ids);
> > +
> > +static struct platform_driver dw100_driver = {
> > + .probe = dw100_probe,
> > + .remove = dw100_remove,
> > + .driver = {
> > + .name = DRV_NAME,
> > + .pm = &dw100_pm,
> > + .of_match_table = dw100_dt_ids,
> > + },
> > +};
> > +
> > +module_platform_driver(dw100_driver);
> > +
> > +MODULE_DESCRIPTION("DW100 Hardware dewarper");
> > +MODULE_AUTHOR("Xavier Roumegue <Xavier.Roumegue@xxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/nxp/dw100/dw100_regs.h b/drivers/media/platform/nxp/dw100/dw100_regs.h
> > new file mode 100644
> > index 000000000000..e85dfeff9056
> > --- /dev/null
> > +++ b/drivers/media/platform/nxp/dw100/dw100_regs.h
> > @@ -0,0 +1,117 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * DW100 Hardware dewarper
> > + *
> > + * Copyright 2022 NXP
> > + * Author: Xavier Roumegue (xavier.roumegue@xxxxxxxxxxx)
> > + */
> > +
> > +#ifndef _DW100_REGS_H_
> > +#define _DW100_REGS_H_
> > +
> > +/* AHB register offset */
> > +#define DW100_DEWARP_ID 0x00
> > +#define DW100_DEWARP_CTRL 0x04
> > +#define DW100_DEWARP_CTRL_ENABLE BIT(0)
> > +#define DW100_DEWARP_CTRL_START BIT(1)
> > +#define DW100_DEWARP_CTRL_SOFT_RESET BIT(2)
> > +#define DW100_DEWARP_CTRL_FORMAT_YUV422_SP 0UL
> > +#define DW100_DEWARP_CTRL_FORMAT_YUV422_PACKED 1UL
> > +#define DW100_DEWARP_CTRL_FORMAT_YUV420_SP 2UL
> > +#define DW100_DEWARP_CTRL_INPUT_FORMAT_MASK GENMASK(5, 4)
> > +#define DW100_DEWARP_CTRL_INPUT_FORMAT(x) ((x) << 4)
> > +#define DW100_DEWARP_CTRL_OUTPUT_FORMAT(x) ((x) << 6)
> > +#define DW100_DEWARP_CTRL_OUTPUT_FORMAT_MASK GENMASK(7, 6)
> > +#define DW100_DEWARP_CTRL_SRC_AUTO_SHADOW BIT(8)
> > +#define DW100_DEWARP_CTRL_HW_HANDSHAKE BIT(9)
> > +#define DW100_DEWARP_CTRL_DST_AUTO_SHADOW BIT(10)
> > +#define DW100_DEWARP_CTRL_SPLIT_LINE BIT(11)
> > +#define DW100_DEWARP_CTRL_PREFETCH_MODE_MASK GENMASK(17, 16)
> > +#define DW100_DEWARP_CTRL_PREFETCH_MODE_TRAVERSAL (0UL << 16)
> > +#define DW100_DEWARP_CTRL_PREFETCH_MODE_CALCULATION (1UL << 16)
> > +#define DW100_DEWARP_CTRL_PREFETCH_MODE_AUTO (2UL << 16)
> > +#define DW100_DEWARP_CTRL_PREFETCH_THRESHOLD_MASK GENMASK(24, 18)
> > +#define DW100_DEWARP_CTRL_PREFETCH_THRESHOLD(x) ((x) << 18)
> > +
> > +#define DW100_MAP_LUT_ADDR 0x08
> > +#define DW100_MAP_LUT_ADDR_ADDR(addr) (((addr) >> 4) & GENMASK(29, 0))
> > +#define DW100_MAP_LUT_SIZE 0x0c
> > +#define DW100_MAP_LUT_SIZE_WIDTH(w) (((w) & GENMASK(10, 0)) << 0)
> > +#define DW100_MAP_LUT_SIZE_HEIGHT(h) (((h) & GENMASK(10, 0)) << 16)
> > +#define DW100_SRC_IMG_Y_BASE 0x10
> > +#define DW100_IMG_Y_BASE(base) (((base) >> 4) & GENMASK(29, 0))
> > +#define DW100_SRC_IMG_UV_BASE 0x14
> > +#define DW100_IMG_UV_BASE(base) (((base) >> 4) & GENMASK(29, 0))
> > +#define DW100_SRC_IMG_SIZE 0x18
> > +#define DW100_IMG_SIZE_WIDTH(w) (((w) & GENMASK(12, 0)) << 0)
> > +#define DW100_IMG_SIZE_HEIGHT(h) (((h) & GENMASK(12, 0)) << 16)
> > +
> > +#define DW100_SRC_IMG_STRIDE 0x1c
> > +#define DW100_MAP_LUT_ADDR2 0x20
> > +#define DW100_MAP_LUT_SIZE2 0x24
> > +#define DW100_SRC_IMG_Y_BASE2 0x28
> > +#define DW100_SRC_IMG_UV_BASE2 0x2c
> > +#define DW100_SRC_IMG_SIZE2 0x30
> > +#define DW100_SRC_IMG_STRIDE2 0x34
> > +#define DW100_DST_IMG_Y_BASE 0x38
> > +#define DW100_DST_IMG_UV_BASE 0x3c
> > +#define DW100_DST_IMG_SIZE 0x40
> > +#define DW100_DST_IMG_STRIDE 0x44
> > +#define DW100_DST_IMG_Y_BASE2 0x48
> > +#define DW100_DST_IMG_UV_BASE2 0x4c
> > +#define DW100_DST_IMG_SIZE2 0x50
> > +#define DW100_DST_IMG_STRIDE2 0x54
> > +#define DW100_SWAP_CONTROL 0x58
> > +#define DW100_SWAP_CONTROL_BYTE BIT(0)
> > +#define DW100_SWAP_CONTROL_SHORT BIT(1)
> > +#define DW100_SWAP_CONTROL_WORD BIT(2)
> > +#define DW100_SWAP_CONTROL_LONG BIT(3)
> > +#define DW100_SWAP_CONTROL_Y(x) (((x) & GENMASK(3, 0)) << 0)
> > +#define DW100_SWAP_CONTROL_UV(x) (((x) & GENMASK(3, 0)) << 4)
> > +#define DW100_SWAP_CONTROL_SRC(x) (((x) & GENMASK(7, 0)) << 0)
> > +#define DW100_SWAP_CONTROL_DST(x) (((x) & GENMASK(7, 0)) << 8)
> > +#define DW100_SWAP_CONTROL_SRC2(x) (((x) & GENMASK(7, 0)) << 16)
> > +#define DW100_SWAP_CONTROL_DST2(x) (((x) & GENMASK(7, 0)) << 24)
> > +#define DW100_SWAP_CONTROL_SRC_MASK GENMASK(7, 0)
> > +#define DW100_SWAP_CONTROL_DST_MASK GENMASK(15, 8)
> > +#define DW100_SWAP_CONTROL_SRC2_MASK GENMASK(23, 16)
> > +#define DW100_SWAP_CONTROL_DST2_MASK GENMASK(31, 24)
> > +#define DW100_VERTICAL_SPLIT_LINE 0x5c
> > +#define DW100_HORIZON_SPLIT_LINE 0x60
> > +#define DW100_SCALE_FACTOR 0x64
> > +#define DW100_ROI_START 0x68
> > +#define DW100_ROI_START_X(x) (((x) & GENMASK(12, 0)) << 0)
> > +#define DW100_ROI_START_Y(y) (((y) & GENMASK(12, 0)) << 16)
> > +#define DW100_BOUNDARY_PIXEL 0x6c
> > +#define DW100_BOUNDARY_PIXEL_V(v) (((v) & GENMASK(7, 0)) << 0)
> > +#define DW100_BOUNDARY_PIXEL_U(u) (((u) & GENMASK(7, 0)) << 8)
> > +#define DW100_BOUNDARY_PIXEL_Y(y) (((y) & GENMASK(7, 0)) << 16)
> > +
> > +#define DW100_INTERRUPT_STATUS 0x70
> > +#define DW100_INTERRUPT_STATUS_INT_FRAME_DONE BIT(0)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_TIME_OUT BIT(1)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_AXI_RESP BIT(2)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_X BIT(3)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_MB_FETCH BIT(4)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_FRAME2 BIT(5)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_FRAME3 BIT(6)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_FRAME_DONE BIT(7)
> > +#define DW100_INTERRUPT_STATUS_INT_ERR_STATUS(x) (((x) >> 1) & 0x7f)
> > +#define DW100_INTERRUPT_STATUS_INT_STATUS(x) ((x) & 0xff)
> > +
> > +#define DW100_INTERRUPT_STATUS_INT_ENABLE_MASK GENMASK(15, 8)
> > +#define DW100_INTERRUPT_STATUS_INT_ENABLE(x) (((x) & GENMASK(7, 0)) << 8)
> > +#define DW100_INTERRUPT_STATUS_FRAME_BUSY BIT(16)
> > +#define DW100_INTERRUPT_STATUS_INT_CLEAR(x) (((x) & GENMASK(7, 0)) << 24)
> > +#define DW100_BUS_CTRL 0x74
> > +#define DW100_BUS_CTRL_AXI_MASTER_ENABLE BIT(31)
> > +#define DW100_BUS_CTRL1 0x78
> > +#define DW100_BUS_TIME_OUT_CYCLE 0x7c
> > +#define DW100_DST_IMG_Y_SIZE1 0x80
> > +#define DW100_DST_IMG_Y_SIZE(sz) (((sz) >> 4) & GENMASK(29, 0))
> > +#define DW100_DST_IMG_UV_SIZE(sz) (((sz) >> 4) & GENMASK(29, 0))
> > +#define DW100_DST_IMG_UV_SIZE1 0x84
> > +#define DW100_DST_IMG_Y_SIZE2 0x88
> > +#define DW100_DST_IMG_UV_SIZE2 0x8c
> > +
> > +#endif /* _DW100_REGS_H_ */
--
Regards,
Laurent Pinchart
