Reviewed-by: Bingbu Cao <bingbu.cao@xxxxxxxxx>
________________________
BRs,
Bingbu Cao
> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Sent: Tuesday, July 26, 2022 8:06 PM
> To: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>; linux-
> media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: Qiu, Tian Shu <tian.shu.qiu@xxxxxxxxx>; Tu, ShawnX
> <shawnx.tu@xxxxxxxxx>; Cao, Bingbu <bingbu.cao@xxxxxxxxx>; Mauro Carvalho
> Chehab <mchehab@xxxxxxxxxx>
> Subject: [PATCH v1 6/8] media: ov2740: Switch to use dev_err_probe()
>
> Switch to use dev_err_probe() to simpify error path and unify message
> template.
>
> While at it, add missed \n to the end of the messages.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ov2740.c | 44 ++++++++++++++++----------------------
> 1 file changed, 19 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c index
> 212190cb14e4..7271e3d011c9 100644
> --- a/drivers/media/i2c/ov2740.c
> +++ b/drivers/media/i2c/ov2740.c
> @@ -1013,10 +1013,10 @@ static int ov2740_check_hwcfg(struct device *dev)
> if (ret)
> return ret;
>
> - if (mclk != OV2740_MCLK) {
> - dev_err(dev, "external clock %d is not supported", mclk);
> - return -EINVAL;
> - }
> + if (mclk != OV2740_MCLK)
> + return dev_err_probe(dev, -EINVAL,
> + "external clock %d is not supported\n",
> + mclk);
>
> ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> if (!ep)
> @@ -1028,15 +1028,14 @@ static int ov2740_check_hwcfg(struct device *dev)
> return ret;
>
> if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV2740_DATA_LANES) {
> - dev_err(dev, "number of CSI2 data lanes %d is not supported",
> - bus_cfg.bus.mipi_csi2.num_data_lanes);
> - ret = -EINVAL;
> + ret = dev_err_probe(dev, -EINVAL,
> + "number of CSI2 data lanes %d is not
> supported\n",
> + bus_cfg.bus.mipi_csi2.num_data_lanes);
> goto check_hwcfg_error;
> }
>
> if (!bus_cfg.nr_of_link_frequencies) {
> - dev_err(dev, "no link frequencies defined");
> - ret = -EINVAL;
> + ret = dev_err_probe(dev, -EINVAL, "no link frequencies
> defined\n");
> goto check_hwcfg_error;
> }
>
> @@ -1048,9 +1047,9 @@ static int ov2740_check_hwcfg(struct device *dev)
> }
>
> if (j == bus_cfg.nr_of_link_frequencies) {
> - dev_err(dev, "no link frequency %lld supported",
> - link_freq_menu_items[i]);
> - ret = -EINVAL;
> + ret = dev_err_probe(dev, -EINVAL,
> + "no link frequency %lld supported\n",
> + link_freq_menu_items[i]);
> goto check_hwcfg_error;
> }
> }
> @@ -1153,16 +1152,14 @@ static int ov2740_register_nvmem(struct i2c_client
> *client,
>
> static int ov2740_probe(struct i2c_client *client) {
> + struct device *dev = &client->dev;
> struct ov2740 *ov2740;
> bool full_power;
> int ret;
>
> ret = ov2740_check_hwcfg(&client->dev);
> - if (ret) {
> - dev_err(&client->dev, "failed to check HW configuration: %d",
> - ret);
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to check HW
> configuration\n");
>
> ov2740 = devm_kzalloc(&client->dev, sizeof(*ov2740), GFP_KERNEL);
> if (!ov2740)
> @@ -1172,17 +1169,15 @@ static int ov2740_probe(struct i2c_client *client)
> full_power = acpi_dev_state_d0(&client->dev);
> if (full_power) {
> ret = ov2740_identify_module(ov2740);
> - if (ret) {
> - dev_err(&client->dev, "failed to find sensor: %d",
> ret);
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to find
> sensor\n");
> }
>
> mutex_init(&ov2740->mutex);
> ov2740->cur_mode = &supported_modes[0];
> ret = ov2740_init_controls(ov2740);
> if (ret) {
> - dev_err(&client->dev, "failed to init controls: %d", ret);
> + dev_err_probe(dev, ret, "failed to init controls\n");
> goto probe_error_v4l2_ctrl_handler_free;
> }
>
> @@ -1193,14 +1188,13 @@ static int ov2740_probe(struct i2c_client *client)
> ov2740->pad.flags = MEDIA_PAD_FL_SOURCE;
> ret = media_entity_pads_init(&ov2740->sd.entity, 1, &ov2740->pad);
> if (ret) {
> - dev_err(&client->dev, "failed to init entity pads: %d", ret);
> + dev_err_probe(dev, ret, "failed to init entity pads\n");
> goto probe_error_v4l2_ctrl_handler_free;
> }
>
> ret = v4l2_async_register_subdev_sensor(&ov2740->sd);
> if (ret < 0) {
> - dev_err(&client->dev, "failed to register V4L2 subdev: %d",
> - ret);
> + dev_err_probe(dev, ret, "failed to register V4L2 subdev\n");
> goto probe_error_media_entity_cleanup;
> }
>
> --
> 2.35.1
