Re: [PATCH v2 3/5] soc: visconti: Add Toshiba Visconti DNN image processing accelerator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 22, 2022 at 05:28:56PM +0900, Yuji Ishikawa wrote:
> --- /dev/null
> +++ b/drivers/soc/visconti/uapi/dnn.h
> @@ -0,0 +1,77 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/* Toshiba Visconti DNN Accelerator Support
> + *
> + * (C) Copyright 2022 TOSHIBA CORPORATION
> + * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
> + */
> +
> +#ifndef _UAPI_LINUX_DNN_H
> +#define _UAPI_LINUX_DNN_H
> +
> +#include <linux/ioctl.h>
> +#include <linux/types.h>
> +#include "ipa.h"
> +
> +#define DRV_DNN_BIT_CONFIG_DESC_FINAL (0x8000U)
> +#define DRV_DNN_BUFFER_INDEX_MAX      (15)
> +
> +#define DRV_DNN_BASE_ADDR_NUM (8U) /* DNN number of base address */
> +
> +#define DRV_DNN_BASE_ADDR_PURPOSE_INPUT	    (1U)
> +#define DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT    (2U)
> +#define DRV_DNN_BASE_ADDR_PURPOSE_AWB	    (3U)
> +#define DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY (4U)
> +
> +/**
> + * struct drv_dnn_status - DNN IPA status for IOC_IPA_GET_STATUS
> + *
> + * @state:     State of driver
> + * @eer_cmd:   Execution error command
> + * @eer:       Execution error
> + * @reserved:  Padding
> + * @eer_flags: Execution error flags
> + */
> +struct drv_dnn_status {
> +	enum drv_ipa_state state;
> +	__u32 eer_cmd;
> +	__u32 eer : 1;
> +	__u32 reserved : 31;

bitfields will not work like this for uapi files, sorry.

> +	__u32 eer_flags[32];

What endian is all of these?  Big?  Little?  Unknown?

> +};
> +
> +struct drv_dnn_base_addr {
> +	__u32 purpose;
> +	union {
> +		struct drv_ipa_addr ipa_addr;
> +		uintptr_t list_addr;

You really do not ever want a uintptr_t in a uapi file, that's not going
to be portable at all.  It's also not a valid kernel type :(

No documentation on what "purpose" is for?

> +	} addr;
> +};
> +
> +/**
> + * struct drv_dnn_descriptor - DNN IPA Descriptor for IOC_IPA_START
> + *
> + * @configuration:        Address of configuration data
> + * @configuration_offset: Configuration offset
> + * @configuration_size:   Configuration data size
> + * @list_num:             Number of input/output list
> + * @base_addr:            Base addresses
> + * @base_addr_flag:       Bit-fields of base_addr list config;
> + *                        0 for fixed address,
> + *                        1 for address list.

Where are the bitfield definitions?

What about unused bits, what happens with them?  You are checking them,
right?

> + * @config_done:          Flags of called configuration
> + * @buffer_info:          Table of buffer information
> + * @buffer_info_num:      Number of buffer_info
> + */
> +struct drv_dnn_descriptor {
> +	struct drv_ipa_addr configuration;
> +	__u32 configuration_offset;

What endian are any of these?

thanks,

greg k-h



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux