Re: [PATCH 1/6] media: v4l2: Add NV15 pixel format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Laurent and Nicolas,

On 15.07.2022 03:04, Laurent Pinchart wrote:
On Thu, Jul 14, 2022 at 09:02:38AM -0400, Nicolas Dufresne wrote:
Le mercredi 13 juillet 2022 à 21:28 +0300, Laurent Pinchart a écrit :
> Hi Sebastian and Jonas,
>
> Thank you for the patch.

Thank you for your review :).

>
> On Wed, Jul 13, 2022 at 06:24:46PM +0200, Sebastian Fricke wrote:
> > From: Jonas Karlman <jonas@xxxxxxxxx>
> >
> > Add the NV15 pixel format used by the Rockchip Video Decoder for 10-bit
> > buffers.
> >
> > NV15 is a packed 10-bit 4:2:0 Y/CbCr format similar to P010 and P210 but
> > has no padding between components. Instead, luminance and chrominance
> > samples are grouped into 4s so that each group is packed into an integer
> > number of bytes:
> >
> > YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
> >
> > The '15' suffix refers to the optimum effective bits per pixel which is
> > achieved when the total number of luminance samples is a multiple of 8
> > for NV15.
> >
> > Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
> > Signed-off-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
> > ---
> >  .../media/v4l/pixfmt-yuv-planar.rst           | 53 +++++++++++++++++++
> >  drivers/media/v4l2-core/v4l2-common.c         |  2 +
> >  drivers/media/v4l2-core/v4l2-ioctl.c          |  1 +
> >  include/uapi/linux/videodev2.h                |  1 +
> >  4 files changed, 57 insertions(+)
> >
> > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > index a900ff66911a..42ab3fe4667f 100644
> > --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> > @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
> >        - Cr, Cb
> >        - Yes
> >        - Linear
> > +    * - V4L2_PIX_FMT_NV15
> > +      - 'NV15'
> > +      - 15
> > +      - 4:2:0
> > +      - Cb, Cr
> > +      - Yes
> > +      - Linear
> >      * - V4L2_PIX_FMT_NV12M
> >        - 'NM12'
> >        - 8
> > @@ -176,6 +183,7 @@ horizontally.
> >
> >  .. _V4L2-PIX-FMT-NV12:
> >  .. _V4L2-PIX-FMT-NV21:
> > +.. _V4L2-PIX-FMT-NV15:
> >  .. _V4L2-PIX-FMT-NV12M:
> >  .. _V4L2-PIX-FMT-NV21M:
> >  .. _V4L2-PIX-FMT-P010:
> > @@ -570,6 +578,51 @@ Data in the 10 high bits, zeros in the 6 low bits, arranged in little endian ord
> >        - Cb\ :sub:`11`
> >        - Cr\ :sub:`11`
> >
> > +.. _V4L2_PIX_FMT_NV15:
> > +
> > +NV15
> > +----
> > +
> > +Like P010 but a packed 10-bit 4:2:0 semi-planar Y/CbCr format without padding between components.
>
> "packed 10-bit semi-planar" sounds confusing, as "packed YUV" usually
> refers to YUYV-style formats, but I'm not sure how to express that
> better.

Perhaps:

"Similar to P010 (10-bit 4:":0 semi-planer Y/CbCr), though unlike P010, the
there is not padding between components."

I'll take that for V2.


> > +Instead, luminance and chrominance samples are grouped into 4s so that each group is packed into an integer
> > +number of bytes:
>
> Could you please wrap the description at 80 columns ?

Will do.

>
> > +YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
> > +
> > +.. flat-table:: Sample 4x4 NV15 Image
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - start + 0:
> > +      - Y'\ :sub:`00`
> > +      - Y'\ :sub:`01`
> > +      - Y'\ :sub:`02`
> > +      - Y'\ :sub:`03`
> > +    * - start + 8:
> > +      - Y'\ :sub:`10`
> > +      - Y'\ :sub:`11`
> > +      - Y'\ :sub:`12`
> > +      - Y'\ :sub:`13`
> > +    * - start + 16:
> > +      - Y'\ :sub:`20`
> > +      - Y'\ :sub:`21`
> > +      - Y'\ :sub:`22`
> > +      - Y'\ :sub:`23`
> > +    * - start + 24:
> > +      - Y'\ :sub:`30`
> > +      - Y'\ :sub:`31`
> > +      - Y'\ :sub:`32`
> > +      - Y'\ :sub:`33`
> > +    * - start + 32:
> > +      - Cb\ :sub:`00`
> > +      - Cr\ :sub:`00`
> > +      - Cb\ :sub:`01`
> > +      - Cr\ :sub:`01`
> > +    * - start + 40:
> > +      - Cb\ :sub:`10`
> > +      - Cr\ :sub:`10`
> > +      - Cb\ :sub:`11`
> > +      - Cr\ :sub:`11`
>
> This doesn't look right. You need to describe the data at the bit level,
> so show how the 10-bit samples are packed into bytes.

A word of NV15 is 40 bits, so 1 word of NV12 is 5 bytes, 4 pixels. I believe
there is no choice here but to describe 4 pixels for Y plane, and 4 pixels for
CbCr plane. This might be a bit big though.

I agree, it may not be the prettiest, but I'd rather have a larger table
than a format that is understood differently by different drivers. Been
there, done that, not again :-)

I'll prepare something for V2 (at my current workload in about 3 weeks
at the earliest).

Greetings,
Sebastian


> > +
> >  .. raw:: latex
> >
> >      \endgroup
> > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > index 1e38ad8906a2..23a0cb02ea3a 100644
> > --- a/drivers/media/v4l2-core/v4l2-common.c
> > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > @@ -262,6 +262,8 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> >  		/* YUV planar formats */
> >  		{ .format = V4L2_PIX_FMT_NV12,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> >  		{ .format = V4L2_PIX_FMT_NV21,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 },
> > +		{ .format = V4L2_PIX_FMT_NV15,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,
> > +		  .block_w = { 4, 2, 0, 0 }, .block_h = { 1, 1, 0, 0 } },
> >  		{ .format = V4L2_PIX_FMT_NV16,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  		{ .format = V4L2_PIX_FMT_NV61,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 },
> >  		{ .format = V4L2_PIX_FMT_NV24,    .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 },
> > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> > index e2526701294e..9e5510cb255e 100644
> > --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> > @@ -1302,6 +1302,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> >  	case V4L2_PIX_FMT_M420:		descr = "YUV 4:2:0 (M420)"; break;
> >  	case V4L2_PIX_FMT_NV12:		descr = "Y/CbCr 4:2:0"; break;
> >  	case V4L2_PIX_FMT_NV21:		descr = "Y/CrCb 4:2:0"; break;
> > +	case V4L2_PIX_FMT_NV15:		descr = "10-bit Y/CbCr 4:2:0 (Packed)"; break;
> >  	case V4L2_PIX_FMT_NV16:		descr = "Y/CbCr 4:2:2"; break;
> >  	case V4L2_PIX_FMT_NV61:		descr = "Y/CrCb 4:2:2"; break;
> >  	case V4L2_PIX_FMT_NV24:		descr = "Y/CbCr 4:4:4"; break;
> > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> > index 5a73b92ffe4d..47ff34d6b79f 100644
> > --- a/include/uapi/linux/videodev2.h
> > +++ b/include/uapi/linux/videodev2.h
> > @@ -598,6 +598,7 @@ struct v4l2_pix_format {
> >  /* two planes -- one Y, one Cr + Cb interleaved  */
> >  #define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
> >  #define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
> > +#define V4L2_PIX_FMT_NV15    v4l2_fourcc('N', 'V', '1', '5') /* 15  Y/CbCr 4:2:0 10-bit packed */
> >  #define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
> >  #define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
> >  #define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */

--
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux