Hi Alexander,
On Thu, Jul 21, 2022 at 12:11:31PM +0200, Alexander Stein wrote:
> Am Donnerstag, 21. Juli 2022, 10:35:38 CEST schrieb Laurent Pinchart:
> > The driver duplicates the same pattern to access the try or active
> > format in multiple locations. Factor it out to a separate function.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/imx290.c | 28 ++++++++++++++++++----------
> > 1 file changed, 18 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index fc6e87fada1c..baf9941c5fbe 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -519,6 +519,20 @@ static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
> > .s_ctrl = imx290_set_ctrl,
> > };
> >
> > +static struct v4l2_mbus_framefmt *
> > +imx290_get_pad_format(struct imx290 *imx290, struct v4l2_subdev_state *state,
> > + u32 which)
> > +{
> > + switch (which) {
> > + case V4L2_SUBDEV_FORMAT_TRY:
> > + return v4l2_subdev_get_try_format(&imx290->sd, state, 0);
> > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > + return &imx290->current_format;
> > + default:
> > + return NULL;
> > + }
> > +}
> > +
> > static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_mbus_code_enum *code)
> > @@ -562,12 +576,7 @@ static int imx290_get_fmt(struct v4l2_subdev *sd,
> >
> > mutex_lock(&imx290->lock);
> >
> > - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> > - framefmt = v4l2_subdev_get_try_format(&imx290->sd, sd_state,
> > - fmt->pad);
> > - else
> > - framefmt = &imx290->current_format;
> > -
> > + framefmt = imx290_get_pad_format(imx290, sd_state, fmt->which);
> > fmt->format = *framefmt;
>
> NULL ptr derence here if 'fmt->which' is neither V4L2_SUBDEV_FORMAT_TRY nor
> V4L2_SUBDEV_FORMAT_ACTIVE. Same for imx290_set_fmt later on.
You're right, but this can't happen, TRY and ACTIVE are the only two
possible values.
> > mutex_unlock(&imx290->lock);
> > @@ -627,10 +636,9 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
> > fmt->format.code = imx290_formats[i].code;
> > fmt->format.field = V4L2_FIELD_NONE;
> >
> > - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> > - format = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> > - } else {
> > - format = &imx290->current_format;
> > + format = imx290_get_pad_format(imx290, sd_state, fmt->which);
> > +
> > + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > imx290->current_mode = mode;
> > imx290->bpp = imx290_formats[i].bpp;
--
Regards,
Laurent Pinchart
