Hello Laurent,
thanks for the patch.
Am Donnerstag, 21. Juli 2022, 10:35:35 CEST schrieb Laurent Pinchart:
> Add support for the V4L2_CID_HBLANK and V4L2_CID_VBLANK controls to the
> imx290 driver. Make the controls read-only to start with, to report the
> values to userspace for timing calculation.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx290.c | 39 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index 4408dd3e191f..7190399f4111 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -146,6 +146,8 @@ struct imx290 {
> struct v4l2_ctrl_handler ctrls;
> struct v4l2_ctrl *link_freq;
> struct v4l2_ctrl *pixel_rate;
> + struct v4l2_ctrl *hblank;
> + struct v4l2_ctrl *vblank;
>
> struct mutex lock;
> };
> @@ -642,6 +644,20 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
> if (imx290->pixel_rate)
> __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate,
>
imx290_calc_pixel_rate(imx290));
> +
> + if (imx290->hblank) {
> + unsigned int hblank = mode->hmax - mode-
>width;
> +
> + __v4l2_ctrl_modify_range(imx290->hblank,
hblank, hblank,
> + 1, hblank);
> + }
> +
> + if (imx290->vblank) {
> + unsigned int vblank = IMX290_VMAX_DEFAULT -
mode->height;
> +
> + __v4l2_ctrl_modify_range(imx290->vblank,
vblank, vblank,
> + 1, vblank);
> + }
> }
>
> *format = fmt->format;
> @@ -880,9 +896,10 @@ static const struct media_entity_operations
> imx290_subdev_entity_ops = {
>
> static int imx290_ctrl_init(struct imx290 *imx290)
> {
> + unsigned int blank;
> int ret;
>
> - v4l2_ctrl_handler_init(&imx290->ctrls, 5);
> + v4l2_ctrl_handler_init(&imx290->ctrls, 7);
> imx290->ctrls.lock = &imx290->lock;
>
> v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> @@ -910,6 +927,26 @@ static int imx290_ctrl_init(struct imx290 *imx290)
>
ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> 0, 0,
imx290_test_pattern_menu);
>
> + /*
> + * Horizontal blanking is controlled through the HMAX register,
which
> + * contains a line length in INCK clock units. The INCK frequency
is
> + * fixed to 74.25 MHz. The HMAX value is currently fixed to 1100,
> + * convert it to a number of pixels based on the nominal pixel
rate.
> + */
Currently the driver only supports 37.125 MHz, please refer to imx290_probe.
Regards,
Alexander
> + blank = imx290->current_mode->hmax - imx290->current_mode->width;
> + imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls,
&imx290_ctrl_ops,
> + V4L2_CID_HBLANK,
blank, blank, 1,
> + blank);
> + if (imx290->hblank)
> + imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + blank = IMX290_VMAX_DEFAULT - imx290->current_mode->height;
> + imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls,
&imx290_ctrl_ops,
> + V4L2_CID_VBLANK,
blank, blank, 1,
> + blank);
> + if (imx290->vblank)
> + imx290->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> imx290->sd.ctrl_handler = &imx290->ctrls;
>
> if (imx290->ctrls.error) {
