The imx290_write_buffered_reg() function wraps a register write with
register hold, to enable changing multiple registers synchronously. It
is used for the gain only, which is an 8-bit register, defeating its
purpose.
The feature is useful, but should be implemented differently. Drop the
function for now, to prepare for a rework of register access.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx290.c | 32 +-------------------------------
1 file changed, 1 insertion(+), 31 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 9a0c458a3af0..f280ded2dac3 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -413,41 +413,11 @@ static int imx290_set_register_array(struct imx290 *imx290,
return 0;
}
-static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
- u8 nr_regs, u32 value)
-{
- unsigned int i;
- int ret;
-
- ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
- if (ret) {
- dev_err(imx290->dev, "Error setting hold register\n");
- return ret;
- }
-
- for (i = 0; i < nr_regs; i++) {
- ret = imx290_write_reg(imx290, address_low + i,
- (u8)(value >> (i * 8)));
- if (ret) {
- dev_err(imx290->dev, "Error writing buffered registers\n");
- return ret;
- }
- }
-
- ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
- if (ret) {
- dev_err(imx290->dev, "Error setting hold register\n");
- return ret;
- }
-
- return ret;
-}
-
static int imx290_set_gain(struct imx290 *imx290, u32 value)
{
int ret;
- ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, value);
+ ret = imx290_write_reg(imx290, IMX290_GAIN, value);
if (ret)
dev_err(imx290->dev, "Unable to write gain\n");
--
Regards,
Laurent Pinchart
