From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
Switch to using runtime PM for power management. Make it optional,
however, to support ACPI.
Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
Changes since v6:
- Rebase on top of latest media tree master branch
Changes in v6:
- remove dependency on pm_runtime (to support ACPI)
Changes in v5:
- fix compilation warning
Changes in v4:
- replace pm_runtime_put* with pm_runtime_put_autosuspend
- remove the manual initial call to ov5640_set_power()
Changes in v3:
- Move v4l2_ctrl_handler_setup() from ov5640_sensor_resume to
ov5640_s_stream()
Changes in v2:
- replace manual tracking of power status with pm_runtime_get_if_in_use
- power on the sensor before reading the checking the chip id
- add dependency on PM to Kconfig
---
drivers/media/i2c/ov5640.c | 133 ++++++++++++++++++++++---------------
1 file changed, 81 insertions(+), 52 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 502f0b62e950..94db427e21de 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -447,8 +448,6 @@ struct ov5640_dev {
/* lock to protect all members below */
struct mutex lock;
- int power_count;
-
struct v4l2_mbus_framefmt fmt;
bool pending_fmt_change;
@@ -2696,39 +2695,24 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
return ret;
}
+static int ov5640_sensor_suspend(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
+
+ return ov5640_set_power(ov5640, false);
+}
+
+static int ov5640_sensor_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
+
+ return ov5640_set_power(ov5640, true);
+}
+
/* --------------- Subdev Operations --------------- */
-static int ov5640_s_power(struct v4l2_subdev *sd, int on)
-{
- struct ov5640_dev *sensor = to_ov5640_dev(sd);
- int ret = 0;
-
- mutex_lock(&sensor->lock);
-
- /*
- * If the power count is modified from 0 to != 0 or from != 0 to 0,
- * update the power state.
- */
- if (sensor->power_count == !on) {
- ret = ov5640_set_power(sensor, !!on);
- if (ret)
- goto out;
- }
-
- /* Update the power count. */
- sensor->power_count += on ? 1 : -1;
- WARN_ON(sensor->power_count < 0);
-out:
- mutex_unlock(&sensor->lock);
-
- if (on && !ret && sensor->power_count == 1) {
- /* restore controls */
- ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
- }
-
- return ret;
-}
-
static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
struct v4l2_fract *fi,
u32 width, u32 height)
@@ -3314,6 +3298,9 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
/* v4l2_ctrl_lock() locks our own mutex */
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
+ return 0;
+
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
val = ov5640_get_gain(sensor);
@@ -3329,6 +3316,8 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return 0;
}
@@ -3358,9 +3347,9 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
/*
* If the device is not powered up by the host driver do
* not apply any controls to H/W at this time. Instead
- * the controls will be restored right after power-up.
+ * the controls will be restored at start streaming time.
*/
- if (sensor->power_count == 0)
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
return 0;
switch (ctrl->id) {
@@ -3402,6 +3391,8 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3677,6 +3668,18 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret = 0;
+ if (enable) {
+ ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
+ if (ret) {
+ pm_runtime_put(&sensor->i2c_client->dev);
+ return ret;
+ }
+ }
+
mutex_lock(&sensor->lock);
if (sensor->streaming == !enable) {
@@ -3701,8 +3704,13 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
if (!ret)
sensor->streaming = enable;
}
+
out:
mutex_unlock(&sensor->lock);
+
+ if (!enable || ret)
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3724,7 +3732,6 @@ static int ov5640_init_cfg(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_core_ops ov5640_core_ops = {
- .s_power = ov5640_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -3770,26 +3777,20 @@ static int ov5640_check_chip_id(struct ov5640_dev *sensor)
int ret = 0;
u16 chip_id;
- ret = ov5640_set_power_on(sensor);
- if (ret)
- return ret;
-
ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id);
if (ret) {
dev_err(&client->dev, "%s: failed to read chip identifier\n",
__func__);
- goto power_off;
+ return ret;
}
if (chip_id != 0x5640) {
dev_err(&client->dev, "%s: wrong chip identifier, expected 0x5640, got 0x%x\n",
__func__, chip_id);
- ret = -ENXIO;
+ return -ENXIO;
}
-power_off:
- ov5640_set_power_off(sensor);
- return ret;
+ return 0;
}
static int ov5640_probe(struct i2c_client *client)
@@ -3880,26 +3881,43 @@ static int ov5640_probe(struct i2c_client *client)
ret = ov5640_get_regulators(sensor);
if (ret)
- return ret;
+ goto entity_cleanup;
mutex_init(&sensor->lock);
- ret = ov5640_check_chip_id(sensor);
- if (ret)
- goto entity_cleanup;
-
ret = ov5640_init_controls(sensor);
if (ret)
goto entity_cleanup;
+ ret = ov5640_sensor_resume(dev);
+ if (ret) {
+ dev_err(dev, "failed to power on\n");
+ goto entity_cleanup;
+ }
+
+ pm_runtime_set_active(dev);
+ pm_runtime_get_noresume(dev);
+ pm_runtime_enable(dev);
+
+ ret = ov5640_check_chip_id(sensor);
+ if (ret)
+ goto err_pm_runtime;
+
ret = v4l2_async_register_subdev_sensor(&sensor->sd);
if (ret)
- goto free_ctrls;
+ goto err_pm_runtime;
+
+ pm_runtime_set_autosuspend_delay(dev, 1000);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put_autosuspend(dev);
return 0;
-free_ctrls:
+err_pm_runtime:
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
+ ov5640_sensor_suspend(dev);
entity_cleanup:
media_entity_cleanup(&sensor->sd.entity);
mutex_destroy(&sensor->lock);
@@ -3910,6 +3928,12 @@ static int ov5640_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
+ struct device *dev = &client->dev;
+
+ pm_runtime_disable(dev);
+ if (!pm_runtime_status_suspended(dev))
+ ov5640_sensor_suspend(dev);
+ pm_runtime_set_suspended(dev);
v4l2_async_unregister_subdev(&sensor->sd);
media_entity_cleanup(&sensor->sd.entity);
@@ -3919,6 +3943,10 @@ static int ov5640_remove(struct i2c_client *client)
return 0;
}
+static const struct dev_pm_ops ov5640_pm_ops = {
+ SET_RUNTIME_PM_OPS(ov5640_sensor_suspend, ov5640_sensor_resume, NULL)
+};
+
static const struct i2c_device_id ov5640_id[] = {
{"ov5640", 0},
{},
@@ -3935,6 +3963,7 @@ static struct i2c_driver ov5640_i2c_driver = {
.driver = {
.name = "ov5640",
.of_match_table = ov5640_dt_ids,
+ .pm = &ov5640_pm_ops,
},
.id_table = ov5640_id,
.probe_new = ov5640_probe,
--
Regards,
Laurent Pinchart
