Re: [PATCH v3 38/46] media: rkisp1: isp: Disallow multiple active sources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11.07.2022 15:42, Laurent Pinchart wrote:
The ISP supports multiple source subdevs, but can only capture from a
single one at a time. The source is selected through link setup. The
driver finds the active source in its .s_stream() handler using the
media_entity_remote_pad() function. This fails to reject invalid
configurations with multiple active sources. Fix it by using the
media_pad_remote_pad_unique() helper instead, and inline
rkisp1_isp_get_source() in rkisp1_isp_s_stream() as the function is
small and has a single caller.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
---
Changes since v2:

- Update media_pad_remote_pad_unique() function name in commit message
---
.../platform/rockchip/rkisp1/rkisp1-isp.c     | 30 ++++++++-----------
1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index 37623b73b1d9..d7e2802d11f5 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -58,20 +58,6 @@
 * Helpers
 */

-static struct v4l2_subdev *rkisp1_isp_get_source(struct v4l2_subdev *sd)
-{
-	struct media_pad *local, *remote;
-	struct media_entity *sensor_me;
-
-	local = &sd->entity.pads[RKISP1_ISP_PAD_SINK_VIDEO];
-	remote = media_pad_remote_pad_first(local);
-	if (!remote)
-		return NULL;
-
-	sensor_me = remote->entity;
-	return media_entity_to_v4l2_subdev(sensor_me);
-}
-
static struct v4l2_mbus_framefmt *
rkisp1_isp_get_pad_fmt(struct rkisp1_isp *isp,
		       struct v4l2_subdev_state *sd_state,
@@ -743,6 +729,8 @@ static int rkisp1_isp_s_stream(struct v4l2_subdev *sd, int enable)
	struct rkisp1_isp *isp = to_rkisp1_isp(sd);
	struct rkisp1_device *rkisp1 = isp->rkisp1;
	const struct rkisp1_sensor_async *asd;
+	struct media_pad *source_pad;
+	struct media_pad *sink_pad;
	int ret;

	if (!enable) {
@@ -754,10 +742,18 @@ static int rkisp1_isp_s_stream(struct v4l2_subdev *sd, int enable)
		return 0;
	}

-	rkisp1->source = rkisp1_isp_get_source(sd);

so 'rkisp1->source' is the source of the isp right? and in addition you later
add csi->source for the csi source. Maybe move rkisp1->source field to rkisp1_isp
to make it clear it is the isp source.
Just a suggestion. If you don't feel like, then:

Reviewed-by: Dafna Hirschfeld <dafna@xxxxxxxxxxxx>

+	sink_pad = &isp->pads[RKISP1_ISP_PAD_SINK_VIDEO];
+	source_pad = media_pad_remote_pad_unique(sink_pad);
+	if (IS_ERR(source_pad)) {
+		dev_dbg(rkisp1->dev, "Failed to get source for ISP: %ld\n",
+			PTR_ERR(source_pad));
+		return -EPIPE;
+	}
+
+	rkisp1->source = media_entity_to_v4l2_subdev(source_pad->entity);
	if (!rkisp1->source) {
-		dev_warn(rkisp1->dev, "No link between isp and source\n");
-		return -ENODEV;
+		/* This should really not happen, so is not worth a message. */
+		return -EPIPE;
	}

	asd = container_of(rkisp1->source->asd, struct rkisp1_sensor_async,
--
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux