Hi Tommaso,
On Mon, Jun 27, 2022 at 05:04:49PM +0200, Tommaso Merciai wrote:
> Rename clk pdata pointer into xvclk (system clock input).
> Same for clk_rate into xvclk_rate. This is more explicit
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai@xxxxxxxxxxxxxxxxxxxx>
Not sure this is really better, but I guess it doesn't hurt
Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
Thanks
j
> ---
> drivers/media/i2c/ov5693.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c
> index 9e84468d920e..d2adc5513a21 100644
> --- a/drivers/media/i2c/ov5693.c
> +++ b/drivers/media/i2c/ov5693.c
> @@ -157,7 +157,7 @@ struct ov5693_device {
> struct gpio_desc *reset;
> struct gpio_desc *powerdown;
> struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES];
> - struct clk *clk;
> + struct clk *xvclk;
>
> struct ov5693_mode {
> struct v4l2_rect crop;
> @@ -794,7 +794,7 @@ static void ov5693_sensor_powerdown(struct ov5693_device *ov5693)
>
> regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies);
>
> - clk_disable_unprepare(ov5693->clk);
> + clk_disable_unprepare(ov5693->xvclk);
> }
>
> static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
> @@ -804,7 +804,7 @@ static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
> gpiod_set_value_cansleep(ov5693->reset, 1);
> gpiod_set_value_cansleep(ov5693->powerdown, 1);
>
> - ret = clk_prepare_enable(ov5693->clk);
> + ret = clk_prepare_enable(ov5693->xvclk);
> if (ret) {
> dev_err(ov5693->dev, "Failed to enable clk\n");
> goto fail_power;
> @@ -1390,7 +1390,7 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693)
> static int ov5693_probe(struct i2c_client *client)
> {
> struct ov5693_device *ov5693;
> - u32 clk_rate;
> + u32 xvclk_rate;
> int ret = 0;
>
> ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL);
> @@ -1408,16 +1408,16 @@ static int ov5693_probe(struct i2c_client *client)
>
> v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops);
>
> - ov5693->clk = devm_clk_get(&client->dev, "xvclk");
> - if (IS_ERR(ov5693->clk)) {
> + ov5693->xvclk = devm_clk_get(&client->dev, "xvclk");
> + if (IS_ERR(ov5693->xvclk)) {
> dev_err(&client->dev, "Error getting clock\n");
> - return PTR_ERR(ov5693->clk);
> + return PTR_ERR(ov5693->xvclk);
> }
>
> - clk_rate = clk_get_rate(ov5693->clk);
> - if (clk_rate != OV5693_XVCLK_FREQ)
> + xvclk_rate = clk_get_rate(ov5693->xvclk);
> + if (xvclk_rate != OV5693_XVCLK_FREQ)
> dev_warn(&client->dev, "Found clk freq %u, expected %u\n",
> - clk_rate, OV5693_XVCLK_FREQ);
> + xvclk_rate, OV5693_XVCLK_FREQ);
>
> ret = ov5693_configure_gpios(ov5693);
> if (ret)
> --
> 2.25.1
>
