Hi Eugen, On 6/15/22 13:06, Eugen.Hristev@xxxxxxxxxxxxx wrote: > On 5/3/22 12:51 PM, Eugen Hristev wrote: >> This series is a split from the series : >> [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller >> and it includes the media controller part. >> previous fixes were sent on a different patch series. >> >> As discussed on the ML, moving forward with having the media link validate at >> start/stop streaming call. >> I will test the patch : >> [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops >> afterwards, but that patch requires moving my logic to the new vb2 callbacks. >> >> Full series history: >> >> Changes in v10: >> -> split the series into this first fixes part. >> -> moved IO_MC addition from first patch to the second patch on the driver changes >> -> edited commit messages >> -> DT nodes now disabled by default. >> >> Changes in v9: >> -> kernel robot reported isc_link_validate is not static, changed to static. >> >> Changes in v8: >> -> scaler: modified crop bounds to have the exact source size >> >> Changes in v7: >> -> scaler: modified crop bounds to have maximum isc size >> -> format propagation: did small changes as per Jacopo review >> >> >> Changes in v6: >> -> worked a bit on scaler, added try crop and other changes as per Jacopo review >> -> worked on isc-base enum_fmt , reworked as per Jacopo review >> >> Changes in v5: >> -> removed patch that removed the 'stop' variable as it was still required >> -> added two new trivial patches >> -> reworked some parts of the scaler and format propagation after discussions with Jacopo >> >> >> Changes in v4: >> -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked >> one patch that was using it >> -> as reviewed by Jacopo, reworked some parts of the media controller implementation >> >> >> Changes in v3: >> - change in bindings, small fixes in csi2dc driver and conversion to mc >> for the isc-base. >> - removed some MAINTAINERS patches and used patterns in MAINTAINERS >> >> Changes in v2: >> - integrated many changes suggested by Jacopo in the review of the v1 series. >> - add a few new patches >> >> Eugen Hristev (5): >> media: atmel: atmel-isc: prepare for media controller support >> media: atmel: atmel-isc: implement media controller >> ARM: dts: at91: sama7g5: add nodes for video capture >> ARM: configs: at91: sama7: add xisc and csi2dc >> ARM: multi_v7_defconfig: add atmel video pipeline modules >> >> arch/arm/boot/dts/sama7g5.dtsi | 51 ++ >> arch/arm/configs/multi_v7_defconfig | 3 + >> arch/arm/configs/sama7_defconfig | 2 + >> drivers/media/platform/atmel/Makefile | 2 +- >> drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++--------- >> .../media/platform/atmel/atmel-isc-scaler.c | 267 ++++++++++ >> drivers/media/platform/atmel/atmel-isc.h | 50 +- >> .../media/platform/atmel/atmel-sama5d2-isc.c | 34 +- >> .../media/platform/atmel/atmel-sama7g5-isc.c | 32 +- >> 9 files changed, 685 insertions(+), 241 deletions(-) >> create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c >> > > > Hello Hans, > > What do you think about this series, does it require more work or > changes until it could move further ? Anything in particular you would > like me to try or test out ? It's high on my todo list to look at this and see if anything else needs to be done. I hope to get to this this week. Regards, Hans > > Thanks, > Eugen
